Western Digital Technologies SDMX28 Clip Sport Plus User Manual ClipSportPlus FCCX

Download:
Mirror Download [FCC.gov]
Document ID	3106426
Application ID	7/Xv1UG4qRGpM7P0btrMLg==
Document Description	User Manual_ClipSport Plus
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.46kB (118278 bits)
Date Submitted	2016-08-22 00:00:00
Date Available	2017-02-18 00:00:00
Creation Date	2016-08-19 08:52:34
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-08-19 08:52:34
Document Title	Microsoft Word - ClipSportPlus FCC.DOCX
Document Creator	PScript5.dll Version 5.2.2
Document Author:	alex_hsieh

Clip Sport Plus FCC
FCC ID, FCC DOC, IC ID, CB/R&TTE‐Safety
FCC Compliance Statement
The statements should be displayed in the user manual: changes or
modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
15.105(b) This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: ‐‐ Reorient or
relocate the receiving antenna. ‐‐ Increase the separation between
the equipment and receiver. ‐‐ Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. ‐‐
Consult the dealer or an experienced radio/TV technician for help.
15.21
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
15.19
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co­located or operating in conjunction with
any other antenna or transmitter.
Please note that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: ‐‐Reorient or
relocate the receiving antenna. –Increase the separation between the
equipment and receiver. –Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. –
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device complies with Industry Canada license‐exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device. Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : alex_hsieh
Create Date                     : 2016:08:19 08:52:34+08:00
Modify Date                     : 2016:08:19 08:52:34+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - ClipSportPlus FCC.DOCX
Creator                         : alex_hsieh
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:6be73906-fb23-47da-8236-0738bbf65cd8
Instance ID                     : uuid:b7647133-1c32-489c-9a04-8e809b0341c6
Page Count                      : 3

EXIF Metadata provided by EXIF.tools