Westone Laboratories Um2 Users Manual
UM2 to the manual 6bf71a0c-9064-473f-8a41-719a80f62754
2015-02-03
: Westone-Laboratories Westone-Laboratories-Um2-Users-Manual-477464 westone-laboratories-um2-users-manual-477464 westone-laboratories pdf
Open the PDF directly: View PDF .
Page Count: 6
Download | |
Open PDF In Browser | View PDF |
Universal Monitor User’s Guide Insertion Instructions Care and Maintenance Hearing Care Information Warranty UM Monitor Care and Maintenance Congratulations on your choice of Westone UM monitors! The information in this booklet will help you get the best possible performance from the product. Monitor Care and Maintenance Here are a few simple guidelines that can greatly increase your listening enjoyment and the lifespan of your UM monitors. • Always store your monitors in the provided case. • In case of poor sound quality due to earwax in the sound bore, use the included wax removal loop to carefully remove the earwax. Never use any other object to attempt to remove the earwax as this may result in damage to the monitors and will void the warranty. • Do not use the cord to remove the monitors from your ears. This may cause damage to the cord and result in poor performance. Damage of this nature is not covered by the warranty. • Do not expose your monitors to temperature extremes. Avoid strong impacts to your monitors. • Wipe down your monitors after each use and never immerse them in water. Please Note: Moisture in your monitors can cause temporary performance issues. Do not insert your monitors if your ears are wet. Always dry your ears completely before inserting your monitors. Should you inadvertently allow water or perspiration into the monitors and they quit working, allow to dry completely before attempting to use again. Minor moisture build-up should dry out and not affect long-term performance. Extended exposure to moisture or submersion will result in permanent damage (not covered by the warranty). Insertion Instructions Before inserting the monitor, turn down the volume on your sound source and either drape the cord over your shoulders and down your back, or run the cord down in front. The monitors are marked with a red and blue dot. Red for the right ear, blue for the left. Compress the foam eartip by rolling it between your fingers (fig. 1). With the body of the monitor toward the back of your ear and the cord facing forward, insert the eartip into your ear canal before the foam expands back to its original shape (fig.2). If you have trouble inserting the monitor, reach over your head with your opposite hand and gently pull up and back on the top of your ear before inserting the eartip. This helps straighten your ear canal and may allow for easier insertion. The monitor cord should run, over and behind your ear. Hold the monitor in place for 5 to 10 seconds to allow the foam to expand and conform to the shape of your ear canal (fig. 3). Once the monitors and cords are comfortably in place, slide the cable zipper up to the base of your skull (not too snugly, as this may cause discomfort). This will limit cable movement and help ensure that your monitors stay in place during use. Westone UM monitors come with two sizes of eartips. Use whichever is most comfortable and provides the best seal for you. To remove and replace the eartips, rotate counterclockwise and pull gently. You may order replacement eartips through our Online Store at www.westone.com or by calling our Supply Line at 1-800-582-4771. Hearing Care Information Please read this important information before using your Westone UM monitors. If, after using your UM monitors, everything sounds muffled, or if you hear ringing or buzzing, your ears are trying to give you a warning! These symptoms are normally associated with a condition known as Temporary Threshold Shift and are an indication of conditions that could lead to permanent hearing loss. While no two individuals’ hearing sensitivity is exactly the same, there are established safety guidelines for sound levels versus time of exposure. The following chart is based on OSHA’s (Occupational Health and Saftey Administration) exposure information for industry. Remember that these guidelines are based on average hearing sensitivity. Your sensitivity may be above or below these levels. Maximum dB level exposure time 85 8 hr. 90 4 hr. 95 2 hr. 100 1 hr. 105 30 min. 110 15 min. 115 7.5 min. The use of any monitors offers benefits and risks. Westone UM monitors can lower ambient sound levels approximately 25dB when properly worn. However, the performance capabilities of the monitors can allow the user to negate the benefits of hearing protection from ambient sound. We want you listening for a lifetime! Remember, personal hearing protection is your responsibility! Important Information Important: Used wisely, your new monitors will provide years of enjoyment. Noise-induced hearing loss is preventable but often undetected until it is too late. Westone and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. Used responsibly, your UM monitors can help prevent noise-induced hearing loss. If you have questions, contact your audiologist or hearing care professional. Be sure to observe the following guidelines: • Do not turn up the volume so high that you can’t hear what’s around you. • You should use extreme caution or temporarily discontinue use in potentially hazardous situations. • Do not use while operating a motorized vehicle as it may create a traffic hazard and is illegal in many areas. If you would like more information or would like to purchase other Westone products and accessories, please call: 1-800-525-5071 or visit us at: www.westone.com Limited Product Warranty Westone warrants this product to be free of defects in material or workmanship for a period of one year from the date of original retail purchase. If your product is found to be defective during the warranty period, Westone will, at its sole option, either repair the product or replace the product with a new or factory reconditioned or substantially equivalent model. This limited warranty does not apply to any defects attributable to damage beyond the reasonable control of Westone including damage caused by abuse, misuse, misapplication or modifications performed by anyone other than Westone. Requesting a Warranty Repair If your product is not functioning properly, first ensure that the sound bore is not blocked by earwax and that the unit is completely dry. Performing these simple troubleshooting steps could solve the problem and eliminate the need for a factory repair. If it is necessary to return your product to Westone for warranty or post-warranty service, please package the product securely and send prepaid and insured using a trackable shipping carrier to: Westone Laboratories, Inc., 2235 Executive Circle, Colorado Springs, CO 80906 USA IMPORTANT: Please include a description of the problem, the address to which the product should be returned, your name, phone number, email address and a copy of the purchase receipt. Limitation of Liability Westone disclaims any and all implied warranties, warranties of merchantability and fitness for a particular purpose to the maximum extent permissible by law. Westone shall not be liable for any special, incidental or consequential damages caused by the use, misuse, or inability to use this product. If purchased under a government contract, those contract terms supersede terms stated herein. At Westone, we value your satisfaction. If you have any questions, please contact us at 800-525-5071 or via email at: music@westone.com. © Westone Laboratories, Inc. PN 92364 3/10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2010:10:20 15:59:50-06:00 Metadata Date : 2010:10:20 15:59:52-06:00 Modify Date : 2010:10:20 15:59:52-06:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7209 bytes, use -b option to extract) Instance ID : uuid:9329ae20-3115-48f0-8843-779b33110dd8 Document ID : xmp.did:E8FF9F2489DCDF11BCBAFB2DC86E2B49 Original Document ID : xmp.did:E4FF9F2489DCDF11BCBAFB2DC86E2B49 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved History Instance ID : xmp.iid:E4FF9F2489DCDF11BCBAFB2DC86E2B49, xmp.iid:E5FF9F2489DCDF11BCBAFB2DC86E2B49, xmp.iid:E6FF9F2489DCDF11BCBAFB2DC86E2B49, xmp.iid:E7FF9F2489DCDF11BCBAFB2DC86E2B49, xmp.iid:E8FF9F2489DCDF11BCBAFB2DC86E2B49, xmp.iid:E9FF9F2489DCDF11BCBAFB2DC86E2B49 History When : 2010:10:20 15:39:55-06:00, 2010:10:20 15:47:40-06:00, 2010:10:20 15:47:40-06:00, 2010:10:20 15:58:10-06:00, 2010:10:20 15:58:10-06:00, 2010:10:20 15:59:43-06:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /metadata, /;/metadata, / Derived From Instance ID : xmp.iid:E7FF9F2489DCDF11BCBAFB2DC86E2B49 Derived From Document ID : xmp.did:E4FF9F2489DCDF11BCBAFB2DC86E2B49 Derived From Original Document ID: xmp.did:E4FF9F2489DCDF11BCBAFB2DC86E2B49 Derived From Rendition Class : default Manifest Link Form : ReferenceStream Manifest Placed X Resolution : 300.00 Manifest Placed Y Resolution : 300.00 Manifest Placed Resolution Unit : Inches Manifest Reference Instance ID : xmp.iid:D940C2C1995FDF118808C05BBE72BA89 Manifest Reference Document ID : uuid:B99D269B3F29DE11ACB0D51556C1DFD5 Doc Change Count : 15 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 6 Creator : Adobe InDesign CS4 (6.0.6)EXIF Metadata provided by EXIF.tools