Wi3 1004-W530 802.11bgn Wireless Access Point Module User Manual Users manual
Wi3 Inc 802.11bgn Wireless Access Point Module Users manual
Wi3 >
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1659450 |
| Application ID | Tk35qlPSgiugKSUI76YfVA== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 89.09kB (1113665 bits) |
| Date Submitted | 2012-03-20 00:00:00 |
| Date Available | 2012-07-18 00:00:00 |
| Creation Date | 2012-03-19 10:05:34 |
| Producing Software | Nitro PDF PrimoPDF |
| Document Lastmod | 2012-03-19 10:05:34 |
| Document Title | Microsoft Word - 140-00205-100A_Wi3-530_User_Manual_Final.doc |
| Document Creator | PrimoPDF http://www.primopdf.com |
| Document Author: | RonT |
Wi3-530 802.11b/g/n AP Module User Manual 140-00205-100 Rev A © 2012 Silex Technology America, Inc. All rights reserved. February 2012 Silex Technology America SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF THIS PRODUCT FOR A PARTICULAR PURPOSE. Silex shall not be liable for any errors contained in this manual or for any damages resulting from loss of use, data, profits, or any incidental or consequential damages arising from the use of SILEX products or services. The information contained in this documentation is subject to change without notice. Information and descriptions contained herein are the property of Silex. Such information and descriptions may not be copied, disseminated, or distributed without the express written consent of Silex. This publication is subject to change without notice. Trademarks ExtendView is a trademark of Silex Technology America, Inc. All other company or product names referenced in this document may be trademarks or registered trademarks of their respective owners. Silex Technology America, Inc. www.silexamerica.com 140-00205-100 Revision A Contents About This User Manual .............................................................................................................................................2 Safety Precautions ..................................................................................................................................................2 Emissions Disclaimer ..............................................................................................................................................2 Chapter 1: Introduction ...............................................................................................................................................3 Chapter 2 Hardware Specifications/Compliance........................................................................................................5 FCC Information......................................................................................................................................................5 Information for Canadian Users (IC Notice)............................................................................................................6 Specifications ..........................................................................................................................................................7 Chapter 3 Installation..................................................................................................................................................8 Installation Requirements .......................................................................................................................................8 Installation Procedure .............................................................................................................................................8 Appendix A Antenna Information................................................................................................................................9 Antenna Specifications ...........................................................................................................................................9 Appendix B Silex Contact Information ......................................................................................................................11 Contents 140-00205-100 Silex Revision A Page 1 About This User Manual This user manual provides detailed specifications, diagrams and additional information required to install the Wi3530 802.11b/g/n AP module into a product. The intended audiences are the developers and engineers responsible for the integration of the module in another product. Safety Precautions To prevent damage to the WI3-530 module’s electronic circuit components, follow established ESD practices and procedures for handling static-sensitive devices. All ESD-sensitive components must be stored and shipped in ESD-conductive bags or bubble-wrap and labeled as such using the standardized ESD adhesive warning label. Ethernet electrical wiring must be at least 6 feet from bare power wiring or lightning rods and associated wires, and at least 6 inches from other types of wire (antenna wires, doorbell wires, wires from transformers to neon signs), steam or hot water pipes, and heating devices. Protectors and grounding wire placed by the service provider must not be connected to, removed, or modified by the customer. Emissions Disclaimer Final emission certification per FCC, IC, CE and other agency requirements are the responsibility of the OEM (refer to chapter 2 for additional information). Page 2 140-00205-100 Silex Revision A About This User Guide Chapter 1: Introduction The WI3-530 is an 802.11b/g/n radio/baseband module in a 70 x 49 mm form factor. Designed for wireless local area network (WLAN) access point applications. WI3-530 features include: • • • • • Highly Integrated Access Point System for 802.11b/g/n WLAN Integrated antennas with receive diversity support Integrated Atheros AR9331 Single Chip WEP, WPA (TKIP), WPA2 security Linux drivers available from Silex (porting will be required in most cases) Introduction 140-00205-100 Silex Revision A Page 3 Page 4 silex Revision A Introduction Chapter 2 Hardware Specifications/Compliance FCC Information FCC ID: AUH-1004-W530 NOTICE In accordance with FCC Part 15, the WI3-530 is listed as a Modular Transmitter device. End products that include the WI3-530 shall have the words “Contains Transmitter module FCC ID: AUH-1004-W530” or “Contains FCC ID: AUH-1004-W530” on an exterior label. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested Specifications/Compliance 140-00205-100 Silex Revision A Page 5 that some biological effects might occur, but such findings have not been confirmed by additional research. To satisfy RF exposure requirements, this device and its antenna(s) must operate with a separation distance of at least 20 centimeters from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Information for Canadian Users (IC Notice) IC:10251A-1004W530 The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Regulations. End products that include the WI3-530 shall have the words “Contains transmitter module IC: 10251A1004W530” or “Contains IC: 10251A-1004W530” on a visible exterior label. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing. This radio transmitter 10251A-1004W530 has been approved by Industry Canada to operate with the antennas listed below, and having a maximum gain of 0 dB @ 2.4 GHz. Antennas not included in this list or having a higher gain are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. • Ethertronics Prestta WLAN Embedded 50 Ohm Antenna, Part No. 1000146 Le présent émetteur radio 10251A-1004W530 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. • Ethertronics Prestta WLAN Embedded 50 Ohm Antenna, Part No. 1000146 Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio Page 6 140-00205-100 Silex Revision A Specifications/Compliance interference to others, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than required for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. Specifications Operating environment: Storage environment: Supply voltage: Host interface: IEEE 802.11b IEEE 802.11g IEEE 802.11n Specifications/Compliance 140-00205-100 Temperature: 0º to +55ºC (32º to +131ºF) Humidity: 20% to 80% Temperature: -40º to +70ºC (-40º to +158ºF) Humidity: 20% to 90% 3.3V ± 5% Proprietary 80-pin Header Frequency: 2412MHz-2462MHz Transmission system: DSSS Transmission speed: 1/2/5/11Mbps Automatic detection Channel: 1-11 Frequency: 2412MHz-2462MHz Transmission system: OFDM Transmission speed: 6/9/12/18/24/36/48/54Mbps Automatic detection Channel: 1-11 Frequency: 2412MHz-2462MHz Transmission system: OFDM Transmission speed: 7/14/21/28/43/57/65/72Mbps Automatic detection Channel: 1-11 Silex Revision A Page 7 Chapter 3 Installation Installation Requirements The WI3-530 must be installed in a device that contains a 80-pin header. The WI3-530 has FCC/IC single modular approval, which can eliminate the need for you to obtain FCC Part 15 Subpart C and RSS-210/GEN (intentional radiation) approvals for your device. In order to use this FCC/IC single modular approval for the WI3-530, OEM integrators must: 1. Include “Contains transmitter module FCC ID: AUH-1004-W530, IC: 10251A-1004W530” or “Contains FCC ID: AUH-1004-W530, IC: 10251A-1004W530” on the exterior label of your device. 2. fix the useable channels to 1 through 11 during the OEM manufacturing process for use in the United States and Canada domain and disable any commands or menu selections in the web interface so the channel selections or domains cannot be changed by the end user. 3. ensure the driver does not permit use of channels 12-14 in ad-hoc mode in the United States and Canada by using the same disabling method. 4. include all required statements in your final product user’s manual (per 15.21, 15.27, 15.105, RSS-GEN, RSS-210, etc) and final product labeling (per 15.19, RSS-GEN). Refer to FCC/IC Information in previous chapter. 5. not provide instructions on how to remove or install the WI3-530 to your end users. 6. provide regulated +3.3 VDC +/- 5% power to the WI3-530. If you do not follow the above instructions, then it is your responsibility to obtain the necessary FCC approvals. Installation Procedure To install the WI3-530: 1. Be sure to use the proper antistatic handling techniques. 2. Connect the 80-pin header plug of the Wi3-530 into the 80-pin header receptacle (Hirose DF12(3.0)-80DP-0.5V(86)) on your host platform. 3. Secure the Wi3-530 to your host platform with appropriate spacers, screws & nuts and other means to hold the unit in place securely. Antenna Information 140-00205-100 Silex Revision A Page 8 Appendix A Antenna Information Antenna Specifications The antenna is the Ethertronics Prestta WLAN Embedded Antenna, Part No. 1000146. Table 1 Electrical Specifications Parameter Antenna Information 140-00205-100 Value Antenna Type Isolated Magnetic Dipole Frequency Range 2.4 to 2.5 GHz Impedance 50 Ohms Gain (peak) 2.4 GHz = 0 dBi VSWR ≤ 3.0 Test Connector U.FL Micro Coaxial Switch Silex Revision A Page 9 Page 10 140-00205-100 Silex Revision A Antenna Information Appendix B Silex Contact Information Silex Technology America, Inc. www.silexamerica.com Technical Support: support@silexamerica.com Sales: sales@silexamerica.com Tel: (801) 748-1199 8:00 to 5:00 Mountain Time Tel: (866) 765-8761 toll-free Fax: (801) 748-0730 Silex Technology Europe GmbH www.silexeurope.com Tel: +49-2159-67500 Tel: 0800-7453938 German toll free Email: contact@silexeurope.com Corporate Headquarters Silex Technology, Inc. www.silex.jp Tel: +81-6-6730-3751 Email: support@silex.jp Silex Technology America, Inc. www.silexamerica.com Antenna Information 140-00205-100 Silex Revision A Page 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 13 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 3cd5cd27-7441-11e1-0000-251a8f8555de Producer : Nitro PDF PrimoPDF Modify Date : 2012:03:19 10:05:34+07:00 Create Date : 2012:03:19 10:05:34+07:00 Creator Tool : PrimoPDF http://www.primopdf.com Document ID : 3cd5cd27-7441-11e1-0000-251a8f8555de Format : application/pdf Title : Microsoft Word - 140-00205-100A_Wi3-530_User_Manual_Final.doc Creator : RonT Author : RonTEXIF Metadata provided by EXIF.tools