WiSilica WCA2CS WCA2CS User Manual WCA2CS Ver1 1 090818x
WiSilica, Inc. WCA2CS WCA2CS Ver1 1 090818x
WiSilica >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4049046 |
| Application ID | WqvTsC8i+p+8d3MP13+ZBw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.83kB (610398 bits) |
| Date Submitted | 2018-10-25 00:00:00 |
| Date Available | 2018-10-25 00:00:00 |
| Creation Date | 2018-08-09 13:09:34 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2018-08-09 13:09:34 |
| Document Title | Microsoft Word - WCA2CS Ver1.1_090818.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Admin |
WISILICA NETWORK LIGHTING | CONTROL SERIES Table of Contents 1. Block Diagram..................................................................................................................................................... 3 2. Specifications ....................................................................................................................................................... 3 3. Device Dimensions (mm) ................................................................................................................................ 5 4. Connector Description ..................................................................................................................................... 5 5. Wiring Diagram .................................................................................................................................................. 6 6. Use Cases .............................................................................................................................................................. 6 7. User Precautions ................................................................................................................................................ 7 WISILICA NETWORK LIGHTING | CONTROL SERIES 1. Block Diagram 2. Specifications Symbol Min Input Voltage Vin 110 Input Current Iin1 Watt Electrical Power consumption Input Frequency Protection Class Inrush Current 50 Typ. Max. Unit. Remarks 277 Vac Rated Input voltage 60 100 mA @ Max RF transmitting 1.0 60 Hz Built-in Class II Suitable for class I and II luminaries 20 Surge transient Protection Active Power kV @Line to Line: Bi-Wave Leakage Current 0.5 mA @Rated input voltage Aux power 12V 120mA Sensor Interface UART WISILICA NETWORK LIGHTING | CONTROL SERIES Analogue Dimming Output Dimming Output1 Vadimo1 10 Max output tolerance ±5% Dimming Output2 Vadimo2 10 Max output tolerance ±5% 15 mA For dimming max output 100 Output Current Dimming Range Dimming Resolution Dimming Curve Linear Cut Off Voltage Bluetooth Frequency Range 2400 TX Power bit 2483.5 dBm Conductive dF2 -25 25 kHz Frequency Deviation ±225 ±275 kHz 150 kHz 48 mA 2483 kHz -37 mA -75 dBm 30 TX current Receive Frequency 2400 Rx Current Receiver Sensitivity -86 Symbol Min Ambient Temperature ta Storage Temperature ts Environmental Typ. Max. Unit. -20 50 ºC -20 70 ºC 85 Relative Humidity IP Rating Dimensions Net Weight Dimming Dimming Control 1 80 Type 0 – 10V WISILICA NETWORK LIGHTING | CONTROL SERIES Note Analog Programmable MHz Frequency Drift(Max) Carrier Frequency offset 100 steps Total current@ Max Tx power Total Current @Rx Mode Remarks IP20 Indoor use only 175*34*30 mm L x W x H (mm) 90 100 T.B.D 3. Device Dimensions (mm) Case Material : 5VA 4. Connector Description PIN SYMBOL COLOR DESCRIPTION Neutral Line Black AC Input Neutral Neutral Load Grey 110-277V ~(Line) Line Yellow 110-277V /5Amps Load Red 110-277V /5Amps PIN SYMBOL COLOR DESCRIPTION ADC input Grey CH1 0 to 10V ADC INPUT ADC input Grey CH2 0 to 10V ADC INPUT RX Grey UART TX Grey UART GND Grey 12V Ground Output 12V Grey Supports up to 1.4W 5. Wire Description PIN SYMBOL COLOR DESCRIPTION CH1+ Purple CH1 0 to 10V Analog Output CH2+ Blue CH2 0 to 10V Analog Output GND Grey 12V Ground output 12V Red 12V WISILICA NETWORK LIGHTING | CONTROL SERIES 6. Wiring Diagram 7. Use Cases 1. Controlling Intensity and CCT of LED bulb 2. Controlling LED bulb with Sensor Inputs 3. Controlling external load upto 5A WISILICA NETWORK LIGHTING | CONTROL SERIES 8. User Precautions • • • Observe the correct polarity of output terminal. Avoid input voltage exceeds the maximum rating, which will cause damage to the circuit and result in malfunction Static electricity or surge voltage may damage the components inside LED Driver, to avoid this please follow the proper anti-electrostatic working process. 9. FCC Statement • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10. RF Exposure Information • The device has been evaluated to meet general RF exposure requirement. The device can be use d in portable exposure condition without restriction. WISILICA NETWORK LIGHTING | CONTROL SERIES
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 Producer : GPL Ghostscript 8.15 Create Date : 2018:08:09 13:09:34 Modify Date : 2018:08:09 13:09:34 Title : Microsoft Word - WCA2CS Ver1.1_090818.docx Creator : PScript5.dll Version 5.2.2 Author : AdminEXIF Metadata provided by EXIF.tools