Williams Sound DLT100 Portable Conference Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1313052
Application ID	tmq9YdI5H4pgEcA1KOz7Mg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.37kB (592138 bits)
Date Submitted	2010-07-18 00:00:00
Date Available	2010-07-18 00:00:00
Creation Date	2010-07-12 11:01:30
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2010-07-15 20:39:07
Document Title	Microsoft PowerPoint - user guide DLT-100 (9 June).pptx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jenny_jo

DLT-100 User Guide
What’s included with DLT-100
① DLT-100
② USB Cable
③ Adaptor
④ Plug 1 (Europe)
⑤ Plug 2 (England)
⑥ Plug 3 (Australia)
①
③
②
④
⑤
⑥
Location of Controls
⑤ External Mic. Jack(3.5mm)
⑥ External Headphone Jack(3.5mm)
Speaker
LCD Display
LED
Function Button
Reset Button
Microphone
Ipod connector (30Pin)
Simultaneous Interpretation Mode
Simultaneous Interpretation Mode
1. Setting procedure for Interpretation Mode
Press and hold power button
for 2 seconds to turn DLT100 on
Press No and Yes button
together for 2 second
Mode icon will blink on
LCD
Press ( +) or (– )button
to select mode
Note
In Interpretation Mode 3
different mode can be used as
shown in left side. Each has
different role but they all can
be used un Interpretation
system
Press (-) button, the mode will be
changed in above sequence.
Press (+) button, reverse sequence.
Main Speaker
Interpreter
AP(relay)
Receiver only
Simultaneous Interpretation Mode
1. Setting procedure for Interpretation Mode
Press mode button to
select interpretation
mode
Press ( +) or (– )button
to select SLV or MAS
SLV- Slave
MAS-Master
When mode selection is
made then SLV icon will
blink
Press mode button to
select SLV or MAS
Note
When channel number is at
No.1, (-) button will not work
12
Press mode button to
select channel number
When channel number
selection is made then
Group icon will blink and
number will be shown
Press ( +) or (– )button
to select transmitting
channel number
10
Press ( +) or (– )button
to select group number
Simultaneous Interpretation System
1.Setting procedure for Interpretation System
Final setting for slave unit
11
12
Note
If your unit is set
to MAS go to next page
Skip procedure 12
and do procedure 13
Press mode button to
select group number
Press No and Yes button
together for 2 second to
complete setting
Simultaneous Interpretation System
1.Setting procedure for Interpretation System
Final setting for Master unit
11
13
Press mode button to
select group number
15
14
Press mode button to
complete Hour setting
Press ( +) or (– )button
to adjust Hour
When group number
selection is made then
number of hour will blink
Press ( +) or (– )button
to adjust minute
16
Press No and Yes button
together for 2 second to
complete setting
Note:
1.Master and Slave unit must have same group number
2.Transmitting Channel must be set different
3.Must have one master in a group
Simultaneous Interpretation Mode
Interpreter -3 units
Receiver – 20 units
CASE1)
Select Channel and Listen
English
Ch1
Chinese
Ch2
Korean
Ch3
CASE2)
Main Speaker -1 units
Interpreter – 2 units
Receiver – 20 units
Select Channel and Listen
Main Speaker
is set to
“0” Channel
Interpreter -A
Ch1
CASE3)
Interpreter –B
Ch2
Interpreter-1 units
AP(Relay) – 1 units
Receiver – 20 units
Interpreter -A
Ch1
AP (=Repeater)
Extend the
distance
Two-way tour guide mode (conference
mode)
2. Setting procedure for Two-way tour guide mode(conference mode)
Æ Mode change from interpretation to Two-way tour guide mode
Press and hold power button
for 2 seconds to turn DLT100 on
Press No and Yes button
together for 2 second
Mode icon will blink on
LCD
Select tour
guide system
Press ( +) or (– )button
to select mode
Press (-) button, the mode will be
changed in above sequence.
Press (+) button, reverse sequence.
Press mode button to
select tour guide system
When mode selection is
made then CHAIRMAN
SLV will blink
Press ( +) or (– )button
to select CHAIRMAN
/SLV, CHAIRMAN10
/MAS,
SLV
Two-way tour guide mode (conference
mode)
2. Setting procedure for Two-way tour guide mode(conference mode)
73
73
Press mode button to
select CHAIRMAN
/SLV, CHAIRMAN
/MAS,
SLV
When CHAIRMAN MAS
Selection is made then
address icon will blink and
number will be shown
14
Press mode button to
set address number
When address setting is
made then Group icon
will blink and number will
be shown
Press ( +) or (– )button
to set address number
(0~1023)
10
Press ( +) or (– )button
to select group number
Final setting for slave unit
11
12
Note
If your unit is set
to CHAIRMAN/MAS
go to next page
Skip procedure 12
Press mode button to
and do procedure 13
select group number
Press No and Yes button
together for 2 second to
complete setting
11
Two-way tour guide mode (conference
mode)
2. Setting procedure for Two-way tour guide mode(conference mode)
Final setting for Master unit
11
13
Press mode button to
select group number
Press ( +) or (– )button
to adjust Hour
When group number
selection is made then
Time icon will blink
16
15
14
Press mode button to
complete Hour setting
Press ( +) or (– )button
to adjust minute
Press mode button to
complete time setting
17
When time setting is made
then speech time talk
icon will blink
Press ( +) or (– )button
to adjust speech time in
minute (up to 60 Min.)
12
Two-way tour guide mode (conference
mode)
2. Setting procedure for Two-way tour guide mode(conference mode)
Note
If you don’t want to set
speech time, please set
speech time to “0”
18
Press No and Yes button
together for 2 second to
complete setting
Note:
1.Master and Slave unit must have same group number
2.Must have one master in a group
13
Two-way tour guide mode (conference
mode)
Tour guide phone-2 units
Receiver – 20 units
CASE1)
Just Listen
English
Chinese
CASE2)
Tour guide phone-3 units
Receiver – 20 units
Two way
communication
Two people can talk at the same time
Just Listen
14
Troubleshooting
Problems
Cause
What to do
Power does not turn-on
Discharge of battery
Charge the battery
Power turned off
automatically
Master device can’t be found
Set Master device
Power doesn’t turn off
Program Error
Press reset button on the backside of
device
Disconnection of earphone
Check Earphone Connection
Master doesn’t exist
Set Master
Different Group Number settings
Setting every unit in same group number
Out of range
Enter the range of 30~50m from the
master unit
More than 1 master exist in a group
Set one master per group
Obstacle Exist
Move to another places or move the
obstacles
More than 2 units with Same
address exist in a group
Set address different
More than 2 units with Same
address exist in a group
Set address different
More than 2 units with Same
address exist in a group
Set address different
Master unit can count ballots up to
99 only
Vote up to 99 people only
Not recognizable address exist
Set Address number between 0 ~ 99
Transmitting channel is
overlapping
Set different transmitting channel
Please check the mode for
simultaneous interpretation mode
set simultaneous interpretation mode
More than 2 master units exist
Set one master only
Have difficult of hearing
sound
(noise, disconnection)
Error in attendees checking
Error in electronic voting
results
Unable to select receiving
channel
Unable to transmitting
Interpretation
• A/S phone Number: 952-943-2252
• Williams Sound Corp. A/S Team
• 10321 West 70th Street Eden Prairie, MN55344 U.S.A
15
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
The following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Part 15.21
Any changes or modifications (including the antennas) made to this device that are not expressly
approved by the manufacturer may void the user's authority to operate the equipment.
FCC Part 15.105
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications, However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure
limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
IC Number: 1360A-DLT100
RSS-GEN 7.1.5
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of
the device.
Caution:
Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void user’s authority to operate the equipment.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
To maintain compliance with IC RC exposure compliance requirement, please avoid direct contact to the
transmitting antenna during transmitting.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. End users must follow this specific operating instructions for satisfying RF exposure
compliance

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:07:15 20:39:07+09:00
Create Date                     : 2010:07:12 11:01:30+09:00
Metadata Date                   : 2010:07:15 20:39:07+09:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - user guide DLT-100 (9 June).pptx
Creator                         : jenny_jo
Document ID                     : uuid:7097f6b4-5f5d-4591-bbe1-932273d759b8
Instance ID                     : uuid:29eabedc-e7b4-4b9c-a613-6a8257fe6356
Has XFA                         : No
Page Count                      : 17
Author                          : jenny_jo

EXIF Metadata provided by EXIF.tools