Wilson Electronics 460030 In-Building Cellular Signal Booster with In-Line Amplification User Manual

Wilson Electronics, LLC In-Building Cellular Signal Booster with In-Line Amplification

UserManual.wiki >

Wilson Electronics >

460030 User Manual

User Manual

WILSON PRO1050A Wilson Electronics BrandNEED HELP? wilsonpro.com 866.294.1660User ManualIn-Building Cellular Signal BoosterWith In-Line Ampliﬁcation

Package Content 1About The WilsonPro 1050 System 2Key Features 4Competitive Advantages 5Post Install Setup 71050 Main Status Screen 81050 In-Line Status Screens 10Safety Guidelines 12Warranty 17_____Index

1WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONWilsonPro 1050 Two-Part Booster System2’ Wilson 400 CableLightning SurgeProtectorPair of 2-Way Radios100’ Wilson 400 CableWide Band DirectionalAntenna + 75’ Wilson 400 CableDome Antenna + 100’ Wilson 400 Cable________Package ContentKit 460230

2IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 FCC ApprovedIn-Line AmpliﬁcationCompensates for up to 300’ of indoor cable losses using in-line ampliﬁcation.Onboard Software ForBetter ControlAutomatically controlled with onboardsoftware, ensuring great connectivitythroughout large spaces and multi-storybuildings.Auto-CalibrationMain booster & In-Line booster automatically link, communicate & calibrate.Extended Dynamic Range For Continuous ConnectivityXDR allows the booster system to never shutdown due to too strong of a signal. No matter how strong, the booster system will never overpower and shutdown.WilsonPro 1050 System

3WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONThe WilsonPRO 1050 Cellular Signal Booster System automatically compensates for signal loss resulting from a long indoor RF coax cable run. Simply connect the 1050 In-Line unit at a cable length between 100’ and 300’ from the 1050 Main unit. When both units are powered up, they will begin to communicate with each other, sending signals and calculating the amount of signal loss in the cable. Once cable losses are calculated, the gain levels are adjusted between the 1050 Main and 1050 In-Line units so that only enough extra gain is added to the system to compensate for the signal loss of the indoor cable. This capability to overcome signiﬁcant cable losses allows the 1050 System to provide cellular coverage in areas that were previously impossible, such as the lower ﬂoors of residences.The WilsonPro 1050 system also includes Wilson Electronics’ state-of-the-art XDR (Extended Dynamic Range) technology that prevents signal overload conditions which can, in accordance with FCC regulations, force a booster to shut down or even shut down.When the WilsonPro 1050 system senses that any incoming cell signal is too strong,and threatens to overload the system, XDR automatically reduces signal gain tocompensate for this overload condition while maintaining signal coverage throughout the building. In contrast, competing signal boosters shut down when they reach a maximum incoming signal strength threshold, causing the indoor cell signal to drop out. Both antenna ports are located on the top of the 1050 Main unit for easy installation. Like all WilsonPro cell signal boosters, the WilsonPRO 1050 Cellular Signal Booster System is universal: it works for all cellular devices, all services including 4G LTE, and all U.S. and Canada cell phone carriers.In-Line Ampliﬁcation

4IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 FCC Approved In-Line Ampliﬁcation: Compensates for up to 300’ of indoor cable losses using in-line ampliﬁcation, providing cell coverage to hard-to-reach areas.Onboard Software for Better Control: Booster is automatically controlled with automatic onboard software. The booster will adjust its gain level up or down as required by the conditions of the immediate signal environment. Extended Dynamic Range (XDR) for continuous connectivity: Gives the 1050 much greater tolerance for a strong incoming signal from the tower. XDR lets the 1050 system work with an incoming signal stronger than any competing booster and never shuts down due to a strong outside signal.Automatic Calibration: Main booster and In-Line booster automatically link, communicate, and calibrate. ____________Key Features

5WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONHighest Downlink Power: Up to +15dB more downlink power than the competition allows for stronger signal in environments where the incoming signal is weak. The beneﬁt is a stronger signal sent to the inside antennas, providing larger coverage area from a single booster. Highest Uplink Power: This allows for a stronger signal transmitted to the tower, up to +3dB more than the competition, providing greater user capacity and increased range from the cell site. Lower Overload and Shutdown Threshold: No matter how strong the outside signal, the WilsonPro 1050 system never shuts down. This is a huge beneﬁt in strong signal environments like cities and locations close to a carrier tower. Intelligent Control: WilsonPro cellular boosters automatically adjust signal gain while still providing even signal coverage throughout the building. Sophisticated Software: Cellular signals are constantly ﬂuctuating. The software is always monitoring signal levels and making immediate adjustments as needed, allowing the booster to operate at maximum gain consistently.___________CompetitiveAdvantages

6IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 OutsideDirectionalAntennato powerLightningSurge Protector1050 Main1050 In-LineInside DomeAntennaBAND SELECTRESETCABLE LOSS2-way radios are included to help with the installation process.Simple wall-mount installation.The direction of the outside antenna should be adjusted until the “DL” bar is maximized.A Wilson Lightning Surge Protector is recommended for all building installations. Make sure the protector is installed outside the building at point of entry connected to a suitable ground and in line between the Outside Antenna and the Signal Booster.__________InstallationDiagram

7WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONInside AntennaLightning SurgeProtectorOutside Antenna1050 In-Line(placed at a cable length of 100’ to 300’)1050 Mainto powerto powerThe WilsonPRO 1050 System is designed with advanced internal programming, which allows it to automatically adjust for a variety of conditions, while still boosting weak signals.Once the AC power cable and antenna cables are connected, turn the unit on by toggling the power switch located near the AC power receptacle.__________Post InstallSetup

8IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 Upon power up, the 1050 MAIN unit will attempt to begin it’s calibration routine, which lasts approximately 14 seconds during which time one of the following messages will appear on the screen:Boot ScreenBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSThe 1050 In-Line unit has been found and is communicating with the 1050 Main. Cable loss calibration is in progress.The 1050 In-Line unit has been found and is communicating with the 1050 Main. Cable loss calibration is in progress.____________1050 MainStatus ScreenIn-Line Found ScreenNo In-Line Screen

9WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSBAND SELECTRESETCABLE LOSSFailed cable loss calibration. Cable loss must be between 4dB and 25dB for all bands. If the cable loss is calculated to be outside of this range, calibration will fail. This range corresponds between 100 feet and 300 feet of Wilson 400 Cable.Once cable calibration has successfully completed, the band status screens will appear.Pressing the Cable Loss Button will display the cable loss compenstion at the upper bands and lower bands. Failed Calibration ScreenCable Loss Button________1050 Main Status Screen (cont.)

10 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 The 1050 In-Line has 3 status lights:GREEN: NormalORANGE: One or more bands has shut o due to strong downlink.RED: One or more bands has shut o due to OSCILLATION.1050 In-LineCABLE CAL COM STATUS1050 In-LineCABLE CAL COM STATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COM STATU S1050 In-LineCABLE CAL COM STATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COMSTATUS____________1050 In-LineStatus Lights‘STATUS’ LED:

11WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONGREEN: Normal, waiting for next communications eventGREEN: Calibration complete.ORANGE: Brief orange blink when communicating with 1050 Main.ORANGE: Calibration in process.RED: Communications failure when attempting to communicate with 1050 Main.RED: Calibration failed.1050 In-LineCABLE CAL COM STATU S1050 In-LineCABLE CAL COM STATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COM STATU S1050 In-LineCABLE CAL COM STATUS1050 In-LineCABLE CAL COMSTATUS1050 In-LineCABLE CAL COMSTATUS‘COM’ LED:‘CABLE CAL’ LED:________1050 In-LIne Status Screen (cont.)

12 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 Warnings To uphold compliance with network protection standards, all active cellular devices must maintain at least 6 feet of separation distance from Panel and Dome antennas.Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment.The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 100 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.AWS Warning: Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground.This is a CONSUMER device.BEFORE USE, you meet all requirements set out in CPC-2-1-05.BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.You MUST operate this device with approved antennas and cables as speciﬁed by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.You MUST cease operating this device immediately if requested by the FCC, ISED or a licensed wireless service provider.WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.This device may be operated ONLY in a ﬁxed location for in-building use.This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR WIRELESS PROVIDER, PLEASE SEE BELOW: Sprint: http://www.sprint.com/legal/fcc_boosters.html T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827 Verizon Wireless: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/ U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp______________Safety Guidelines

13WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATIONThe following accessories are certiﬁed by the FCC to be used with the Wilson PRO 1050 System.Inside Antenna Expansion Kit Kit 309900-50N400902 - Wall Panel antennas1 - 50 ohm 3-Way Splitter1 - 100' Wilson 400Kit 309905-50N174203 - Wall Panel Antennas 3 - 2-Way 50 Ohm Splitters20' RG174Kit 309902-75F06502 - Wall Panel Antennas1 - 3-Way 75Ohm Splitter50' RG6Kit 309903-75F11803 - Wall Panel Antennas3 - 2-Way 75Ohm Splitters80' RG11 cableKit 309904-75F58301 - Wall Panel Antenna1 - 2-Way 75 Ohm Splitter30' RG58 cableInside Antenna Kits Kit 311155-0670 75 Ohm Wall mount Panel Antenna70’ RG6 CableKit 311135-584050 Ohm Wall mount Panel Antenna40’ RG58 CableKit 311135-40015050 Ohm Wall mount Panel Antenna150' Wilson 400Kit 311155-1112075 Ohm Wall mount Panel Antenna10’ RG11 cableKit 304412-40010050 Ohm 4G Dome Antenna100' Wilson400 cableKit 304412-583050 Ohm 4G Dome Antenna30' RG58 cableKit 304419-117575 Ohm 4G Dome Antenna75' RG 11 cableKit 304419-1745075 Ohm 4G Dome Antenna50' RG174 cableMay need separate adapterKit 304419-065075 Ohm 4G Dome Antenna50' RG6 cable50 Ohm Outside Antenna Kits Kit 314453-582550 Ohm Pole Mount Panel Antenna25’ RG58 CableKit 314411-582550 Ohm Wide Band Directional25’ RG58 CableKit 301111-5850Yagi Directional Antenna50’ RG58 CableKit 311203-5820 Omni-Directional antenna20’ RG58 CableKit 314411-4007550 Ohm Wide Band Directional75’ LMR400 CableKit 311203-40020Omni-Directional antenna20’ LMR400 CableKit 301111-400170Yagi Directional w/ N-Female170’ LMR400Kit 314453-4007550 Ohm Pole Mount Panel Antenna75’ LMR400 CableKit 304422-4002050 Ohm 4G Omni Antenna20’ Wilson400 cableKit 304422-581050 Ohm 4G Omni Antenna10’ RG58 cableKit 304422-112050 Ohm 4G Omni Antenna20’ RG11 cableMay need separate adapter75 Ohm Outside Antenna KitsKit 301111-0675 Yagi Directional Antenna75’ RG6 CableN-Male to F-Female adapterKit 311201-0620Omni Directional w/ F-Female20’ RG6 CableKit 314473-064075 Ohm Pole Mount Panel Antenna40’ RG6 CableKit 311141-062075 Ohm Grey Brick Antenna20’ RG6 CableKit 301111-11140Yagi Directional Antenna140’ RG11 CableN-Male to F-Female adapterKit 311201-1120Omni Directional w/ F-Female20’ RG11 CableKit 314473-117575 Ohm Pole Mount Panel Antenna75’ RG11 CableKit 314475-063075 Ohm Wide Band Directional30’ RG6 CableKit 314475-117575 Ohm Wide Band Directional75’ RG11 CableKit 311141-112075 Ohm Grey Brick Antenna20’ RG11 CableKit 304421-1741075 Ohm 4G Omni Antenna10’ RG174 cableKit 304421-061075 Ohm 4G Omni Antenna10’ RG6 cableKit 304421-581075 Ohm 4G Omni Antenna10’ RG58 cableMay need separate adapterKit 304421-112075 Ohm 4G Omni Antenna20’ RG 11 cable_________________Antenna Kit Options

14 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 Product Number 460030Model Number 460030FCC ID PWO460030 / PWO0460030ILIC ID 4726A-460030Connectors N-Female Antenna Impedance 50 OhmsFrequency 698-716 MHz, 729-746 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHzPower output for single cell phone (Uplink) dBm700MHz Band12/17 700MHz Band13 800MHz 1700MHz 1900MHz24.7 24.7 24.3 25.1 24.5Power output for single cell phone (Downlink) dBm700MHz Band12/17 700MHz Band13 800MHz 2100MHz 1900MHz14.8 14.3 15.2 15 15.11050 Main 1050 In-LineNoise Figure 5 dB nominal 5 dB nominalIsolation > 90 dB > 90 dBPower Requirements 110-220V AC 5V 3AThe term “IC” before the radio certiﬁcation number only signiﬁes that Industry Canada technical speciﬁcations were met.Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for ﬁve minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power o on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (ﬁve) such automatic restarts, any problematic bands are permanently shut o until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.___________Speciﬁcations

15WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION____________Notes

16 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION WILSON PRO 1050 ____________Notes

17WILSON PRO 1050 IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION 30 DAY MONEY-BACK GUARANTEEAll WilsonPro products are protected by WilsonPro 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase.3 YEAR WARRANTYWilsonPro Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option, either repair or replace the product.This warranty does not apply to any Signal Boosters determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties.RMA numbers may be obtained by contacting Customer Support.DISCLAIMER: The information provided by WilsonPro is believed to be complete and accurate. However, no responsibility is assumed by WilsonPro for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.NEED HELP? support.wilsonpro.com 866.294.1660________Warranty