Wilson Electronics 824WB56 In-Building Bidirectional Amplifier User Manual

Download:
Mirror Download [FCC.gov]
Document ID	403143
Application ID	oJ+rviSCBbnDlR9HUcgKuA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.86kB (635767 bits)
Date Submitted	2004-03-08 00:00:00
Date Available	2004-03-08 00:00:00
Creation Date	2003-10-21 09:53:16
Producing Software	Adobe PDF Library 5.0
Document Lastmod	2004-01-20 14:23:08
Document Title	Users Manual
Document Creator	Adobe InDesign 2.0.2

Wireless
IN BUILDING
Installation Guide
AMPS
IN BUILDING
Bi-directional Amplifier
#801102 (43dB Model)
#801103 (50dB Model)
#801104 (60dB Model)
FCC ID: PWO824WB56
IC: 4726A-824WB56
iDEN
IN BUILDING
Bi-directional Amplifier
#804001 (43dB Model)
#804003 (50dB Model)
#804004 (60dB Model)
FCC ID: PWO806WB56
IC: 4726A-806WB56
Wilson Electronics, Inc.
3301 E. Deseret Drive, St. George, Utah 84790
For additional technical support go to
www.wilsonelectronics.com
Phone: 1-866-294-1660
Fax: 1-435-656-2432
The term “IC:” before the radio certification number only signifies
that Industry of Canada technical specifications were met.
1. PURPOSE OF THE AMPS/iDEN AMPLIFIER
The AMPS/iDEN Bi-directional Amplifier improves RF coverage for areas in
which low signal strength or no signal is a problem.
2. PACKAGE CONTENTS
2.1 AMPS/iDEN Bi-directional Amplifier
2.2 AC-to-DC (110 volt) Power Supply
3. HOW THE AMPS/iDEN AMPLIFIER FUNCTIONS
The signal is received by the outside antenna from the cell site. The signal is then
AMPLIFIED and transmitted to your phone through the inside antenna. When
the phone transmits, the signal is received by the inside antenna and then
AMPLIFIED and transmitted to the cell site through the outside antenna.
The information provided by Wilson Electronics, Inc. is believed to be complete and accurate.
However, no responsibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third
parties that may result from its use.
Copyright © 2004 Wilson Electronics, Inc.
4. AMPLIFIER INSTALLATION (see illustration on 4-5)
4.1 Installing the Wilson Cellular Outside Antenna
4.1.1 Select a location on the roof using your AMPS/iDEN phone in test mode to
find the best signal strength. (See leaflet titled PHONE TEST MODES)
4.1.2 The Outside Antenna should be located in an area with at least a 3’ radius
clear of obstructions and other radiating elements.
NOTE: Mount the AMPLIFIER away from direct sunlight, excessive heat
and/or moisture. The amplifier needs proper ventilation.
DO NOT place the amplifier in an air-tight enclosure.
WARNING: The outside antenna used with this amplifier must be fixedmounted on an outdoor permanent structure with a separation of at least 20
feet from all persons during normal operation.
4.2 Installing The Amplifier
WARNING: Connecting amplifier directly to cell phone may damage phone.
4.2.1 Mount the AMPLIFIER on a wall or ceiling using #6 screws.
4.2.2 Connect the Outside Antenna to the AMPLIFIER side labeled “OUTSIDE
ANTENNA”.
4.2.3 Connect the Inside Antenna to the AMPLIFIER side labeled “INSIDE
ANTENNA”.
4.2.4 Verify that both the OUTSIDE and INSIDE antennas are connected before connecting the AC-DC power supply to the power outlet.
4.3 Installing The Wilson Cellular Inside Antenna
4.3.1 The Inside Antenna should be centered in the weak signal area. The
INSIDE ANTENNA should be at least 7’ from the ground.
WARNING: The inside antenna used with this amplifier must be mounted
with a separation distance of at least 8 inches from all persons and must not be
co-located or operating in conjunction with any other antenna or amplifier.
4.4 When covering large areas a splitter can be used to allow for more than one
inside antenna. Extension cables can also be used if the weak signal area is
located far from the location of the outside antenna.
NOTE: A minimum of 20’ coax extension is recommended for isolation
between antennas.
������� �������
�������� ����
������� �����
����
����
���������
�����
����� ������
������ ������� ��
��������� ����������
������� ������� ��
��������� ����������
��������
��������
�����
5. AMPLIFIER SPECIFICATIONS FOR AMPS 43dB, 50dB & 60dB MODELS
Part #: 801102 (43dB Model) & 801103 (50dB Model) & 801104 (60dB Model)
43dB
Frequency
Gain (up/down)
50dB
60dB
824-849MHz Uplink 869-894MHz Downlink
(43dB/43dB)
(50dB/50dB)
(60dB/60dB)
Flatness (up/down)
(+/- 4dB/+/-4dB) (+/- 4dB/+/-6dB) (+/- 4dB/+/-6dB)
Max RF (up/down)
(+31dBm/+15dBm) (+35dBm/+15dBm) (+35dBm/+15dBm)
Noise Figure (down)
Isolation
(3dB nominal)
(3dB nominal)
(3dB nominal)
Uplink/Downlink More than 90dB
Power Consumption
13.8V, 1.5A
AMPLIFIER LAYOUT
KEEP A SEPARATION DISTANCE OF AT
LEAST 20ft HORIZONTAL AND 5ft VERTICAL BETWEEN ANTENNAS
If using the Yagi Antenna, make sure the Yagi
is pointed AWAY from the inside antenna.
AMPS/iDEN AMPLIFIER PHYSICAL
SPECIFICATIONS
������ �������
Connectors
Dimensions
�������� �������
������� �����
FME-Male 50 Ohms
5.5x4.3x1.4 (inch) or
14.0x10.8x3.5 (cm)
1.32 Pounds or 600G
Weight
AMPLIFIER SPECIFICATIONS FOR iDEN 43dB, 50dB & 60dB MODELS
Part #: 804001 (43dB Model) & 804003 (50dB Model) & 804004 (60dB Model)
43dB
Frequency
Gain (up/down)
50dB
60dB
806-821MHz Uplink 851-866MHz Downlink
(43dB/43dB)
(50dB/50dB)
(60dB/60dB)
Flatness (up/down)
(+/- 4dB/+/-4dB) (+/- 4dB/+/-6dB) (+/- 4dB/+/-6dB)
Max RF (up/down)
(+35dBm/+15dBm) (+35dBm/+15dBm) (+35dBm/+15dBm)
Noise Figure (down)
Isolation
(3dB nominal)
(3dB nominal)
(3dB nominal)
Uplink/Downlink More than 90dB
Power Consumption
13.8V, 1.5A
6. OPTIONAL ACCESSORIES/ANTENNA OPTIONS
6.1 2-Way RF Splitter - allows for multiple inside antennas.
6.2 Coax Cable Extensions 50Ω (see chart on next page)
6.3 Antenna Options:
Inside Antenna Options
Outside Antenna Option
301103 - Magnet Mount
301111 - Yagi
301106 - Stealth
301113 - Mini Magnet
6.4 N-Female To FME-Female Adapter - Adapts 9913 Coax to fit the AMPS/
iDEN Bi-directional Amplifier
6.5 Lightning Suppressor
WARNING: Lightning protection is recommended for all installations.
6.6 DC Power Cable
7. TECH SUPPORT
If you need further assistance with your installation:
1) Call us Toll-Free at 866-294-1660
2) E-mail tech support at tech@wilsonelectronics.com
3) Go to www.wilsonelectronics.com
Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time)
8. WARNINGS
WARNING: The outside antenna used with this amplifier must be fixed-mounted
on an outdoor permanent structure with a separation of at least 20 feet
from all persons during normal operation.
WARNING: The inside antenna used with this amplifier must be mounted with a
separation distance of at least 8 inches from all persons and must not
be co-located or operating in conjunction with any other antenna or
amplifier.
WARNING: Verify that both the Outside and Inside Antennas are connected before
plugging in the AC-DC power supply to the power outlet.
WARNING: Lightning protection is recommended for all installations.
EXTENSION CABLE CHART
951101
5’ Extension Cable RG 58
Low Loss Coax
(0.6 db loss)
951102
10’ Extension Cable RG 58
Low Loss Coax
(1.2 db loss)
951103
15’ Extension Cable RG 58
Low Loss Coax
(1.8 db loss)
951104
20’ Extension Cable RG 58
Low Loss Coax
(2.4 db loss) Used with the Yagi
Antenna - (N-Male to FME Female)
951108
20’ Extension Cable 9913
Ultra Low Loss Coax
Only use 9913 Low Loss Coax for
extensions 20’ or longer (0.8 db loss)
951105
30’ Extension Cable 9913
Ultra Low Loss Coax
(1.2 db loss)
951106
50’ Extension Cable 9913
Ultra Low Loss Coax
(2.0 db loss)
951107
100’ Extension 9913 Low
Loss Coax
(4.0 db loss)
951110
2’ Extension RG 58 Low
Loss Coax
(N-Male to FME Female)
Used with the Yagi antenna to help
find the optimum signal strength (for
installation purposes only).
951113
2’ Extension 9913 Ultra
Low Loss Coax
(N-Male to N Male Ends)
(0.08 db loss) Jumper Coax - Can be
used to connect a splitter behind an
amplifier.
RG 58 - FME connectors / 9913 - N connectors
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of this device.
��
���
���
����
�����������
������������ ��� ��������� �����
ANTENNA OPTIONS
For more options visit
www.wilsonelectronics.com
�������
���� ������
������ �����
������� ���� �����
�������� ��� ��� �� �����
15 DAY
MONEY BACK
GUARANTEE
All Wilson products
have a 15 day
money back
guarantee with
Proof of Purchase
1 YEAR WARRANTY
The Wilson amplifier is warranted for one year against defects in workmanship
and/or materials and will be repaired or replaced, at the discretion of the manufacturer, to the original purchaser with dated proof of purchase or sales receipt.
If you have questions about your amplifier please call technical support
call 1-866-294-1660 or E-mail tech@wilsonelectronics.com
Most warranty cases can be handled by taking the amplifier and the receipt to the store where it was purchased. If inconvenient, the amplifier and a
copy of the receipt, may be sent to the factory, at purchasers expense, where
it may be repaired or replaced and returned shipping paid. Warranty does not
cover damages caused by abuse, misuse, and negligence.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:01:20 14:23:08-07:00
Create Date                     : 2003:10:21 09:53:16Z
Producer                        : Adobe PDF Library 5.0
Creator                         : Adobe InDesign 2.0.2
Trapped                         : False
Page Count                      : 8
Creation Date                   : 2003:10:21 09:53:16Z
Mod Date                        : 2004:01:20 14:23:08-07:00
Metadata Date                   : 2004:01:20 14:23:08-07:00
Document ID                     : adobe:docid:indd:c5911782-03d4-11d8-a3d4-eea2eea8bff1
Version ID                      : 1
Rendition Class                 : proof:pdf
Rendition Of Document ID        : adobe:docid:indd:c5911782-03d4-11d8-a3d4-eea2eea8bff1
Rendition Of Version ID         : 1
Rendition Of Rendition Class    : default
Format                          : application/pdf
Title                           : 
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools