| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 5611 |
| Application ID | gc8y+b1HWDhzV5/n0Z7sRg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 83.95kB (1049392 bits) |
| Date Submitted | 1998-08-18 00:00:00 |
| Date Available | 1998-09-04 00:00:00 |
| Creation Date | 1998-08-14 17:59:51 |
| Producing Software | Acrobat 3.0 Scan Plug-in |
| Document Lastmod | 1998-08-18 18:36:50 |
| Document Title | Users Manual |
| Document Creator | Acrobat 3.0 Scan Plug-in |
WinTrend
WT-3020 3D AUDIO CARD
USER MANUAL
WinTrend Technology. CO. LTD..
SF, No. 90, Sec. 1, Hsin-Tai-wu Road, His-Chih,
Taipei, Taiwan, R.O.C.
Release 0.98 August 1, 1998
©1998 WinTrend Technology, CO., LTD..
FCC Warning
This device complies with Part 15 ofthe FCC Rules.
Operation is subject to the following two conditions: (I) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Information to the User
This equipment has been tested and found to comply with the limits for a class
B digital device pursuant to part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
-lncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
EXIF.tools