Windcave BRF210-REV1 BRF210 Rev 1 - Contactless Card Reader User Manual SCR200 SKP200 Hardware Installation Guide
Direct Payment Solutions US LLC BRF210 Rev 1 - Contactless Card Reader SCR200 SKP200 Hardware Installation Guide
Windcave >
BRF210 Hardware Installation Manual
BRF210 Hardware Installation Guide Version 0.1 DOCUMENT REVISION INFORMATION Version 0.1 Date 15/10/2014 Revision Information Initial version. COPYRIGHT © Copyright 2014, Direct Payment Solutions (DPS) Limited 98 Anzac Avenue PO Box 8400 Auckland, 1035 New Zealand www.paymentexpress.com All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the express written permission of Direct Payment Solutions. PROPRIETARY NOTICE The information described in this document is proprietary and confidential to Direct Payment Solutions (DPS). Any unauthorised use of this material is expressly prohibited except as authorised by Direct Payment Solutions in writing. CONTENTS Overview ...................................................................................................................................................................... 4 Unit Dimensions ........................................................................................................................................................... 5 Mounting Plate Dimensions ......................................................................................................................................... 6 Contact DPS ................................................................................................................................................................ 7 1 OVERVIEW Hardware Overview The BRF contactless antenna is an optional receiver that can be plugged into the SCR to support contactless payments (e.g. Visa PayWave, MasterCard PayPass). Supports closed loop proprietary payment cards (e.g MiFare) 32-Bit Cortex M3 120MHz processor Display LEDs x4 Physical Link Interface Connection with the SCR unit is via the attached cable located on the back of the BRF unit. Power Requirements The device accepts DC regulated from +5V to +45V. SELV (Safety Extra Low Voltage) Standards Compliance EMV Level 1 & 2 Visa PayWave v2.1 MasterCard PayPass v3.0 EMC Standards o AS/NZS 4268: 2012 o ETSI EN 302 291-2, V1.1.1, 2005 o EN 301 489-3 V1.4.1 o AS/NZS CISPR 22: 2009 + Amendment 1: 2009 Environmental Standards o IEC 60529 : 2013 (Ed 2.2) – Degrees of protection provided by enclosures – IP66 o IEC 60068-2-6 : 2007 (Ed. 7.0) – Sinusoidal Vibration o IEC 60068-2-64 : 2008 (Ed. 2.0) – Broadband Random Vibration BRF210 – Hardware Installation Guide Version: 0.1 Page | 4 of 7 2 UNIT DIMENSIONS BRF210 – Hardware Installation Guide Version: 0.1 Page | 5 of 7 3 MOUNTING PLATE DIMENSIONS BRF210 – Hardware Installation Guide Version: 0.1 Page | 6 of 7 4 CONTACT DPS Phone International +64 9 309 4693 Australia 1 800 006 254 or +61 2 8268 7700 Hong Kong +852 3 678 6766 New Zealand 0800 PAYMENT (729 6368) or 09 309 4693 Singapore +65 3 158 1353 South Africa +27 10 500 8784 United Kingdom +44 (0) 20 3176 5551 USA +1 310 670 7299 E-mail Sales sales@paymentexpress.com Support support@paymentexpress.com Dev Support devsupport@paymentexpress.com BRF210 – Hardware Installation Guide Version: 0.1 Page | 7 of 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 Language : en-NZ Tagged PDF : Yes Title : SCR200/SKP200 Hardware Installation Guide Author : Andrew Lee Subject : 0.1 Creator : Microsoft® Word 2013 Create Date : 2014:10:15 09:43:27+13:00 Modify Date : 2014:10:15 09:43:27+13:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools