Windigo Systems PBTCF02C2CW Bluetooth Compact Flash Card User Manual XTNDConnect Blue Manager for Windows

Windigo Systems Bluetooth Compact Flash Card XTNDConnect Blue Manager for Windows

users manual

XTNDConnect Pocket Monitor
for Windows CE
Release Notes
Version 1.1.2
The information provided in this documentation is subject to change without notice, and Windigo
Systems reserves all the rights.
Pocket Monitor Overview
XTNDConnect Pocket Monitor is a Bluetooth communication software application that
enables users to manage their wireless personal area network (WPAN) from a single, easy-to-
use program on Windows CE platform. It allows users to wirelessly interact with and manage
remote Bluetooth devices. With Pocket Monitor, users can discover devices, discover remote
device’s service, and exchange business card, or any files with remote devices. Additionally,
the application loads virtual COM ports, enabling users to perform wireless Dial-up
Networking, LAN Access and serial based functions with Bluetooth supported mobile phones,
modems and access points.
System Requirements
This section contains important information about installing Pocket Monitor Windows CE.
Pocket Monitor requires Pocket PC2000 or later, also on host PC, requires Windows 98SE,
Windows ME, Windows NT, Windows 2000 or Windows XP.
It is necessary to install the ActiveSync 3.1 or later on host PC and establish a partnership
between host PC and Pocket PC device before Pocket Monitor installation.
Pleaser refer to ActiveSync and Pocket PC user manual for more details regarding software
installation.
Page 1 of 3
2001 Windigo Systems
Pocket Monitor Release Notes
Quick Start Instructions
Download Pocket Monitor from Windigo Systems FTP server, and run “CEStack.exe"
Once the installation finishes, you should have a shortcut on your desktop called “CE Stack
Install”
Make sure your Pocket PC device is turned on and the ActiveSync is working
Double click “CE Stack Install” icon to run the installation for CE device, and follow the
instruction both on your host PC and your Pocket PC
After the installation finishes, reset the Pocket PC device
Now you can plug in Windigo Bluetooth CF card into the CF expension pack slot, and
ready to run XTNDConnect Monitor, and enjoy the Bluetooth technology from Windigo
Systems.
Known Issues
Installation
This installation package and Pocket Monitor have been tested on iPaq PocketPC with
Compaq CF expansion pack only, if you have encountered any other questions on any
other platform, please contact with Windigo Systems for technical support.
Exchange vCards
Default vCard used to exchange between Bluetooth devices is named as myCard.vcf,
so if you don’t have this file on your pocket PC, you will be prompted by an error
message when you try to exchange the vCards. So before you can exchange your vCard
with others, please make sure you have created this vCard, or you have changed the
card name to existing one you have on your iPaq. You can change the default settings
for OBEX push from Settings->Object Push Settings.
File Transfer
Bi-directional operations (such as sending files in both directions at once) using file
transfer are not fully supported.
Startup/Shutdown
If happened you cannot open Pocket Monitor, please reset your pocket PC.
Page 2 of 3
2001 Windigo Systems
Pocket Monitor Release Notes
This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.

Navigation menu