Wingsafe Technology WBU-900A 900MHz Long Range Reader User Manual Users manual
Wingsafe Technology Inc. 900MHz Long Range Reader Users manual
Users manual
User Manual Of WBU-900A User Manual Content 1 Introduction .................................................................................................................................2 1.1 Functions ........................................................................................................................................2 1.1.1 Working Mode.........................................................................................................................2 1.1.2 Parameters ..............................................................................................................................2 1.2 System Description .........................................................................................................................3 1.2.1 Components ............................................................................................................................3 1.2.2 Host .........................................................................................................................................3 1.2.3 Interface ..................................................................................................................................4 1.2.4 LED Indicator ...........................................................................................................................4 1.2.5 Buzzer......................................................................................................................................4 1.2.6 Label ........................................................................................................................................4 1.3 Cautions before Using ....................................................................................................................5 2 Reader Installation........................................................................................................................5 2.1 Installation Overview......................................................................................................................5 2.2 Installation Summary .....................................................................................................................6 Appendix 1 How to check the performance simply? .........................................................................6 User Manual This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 1 Introduction 1.1 Functions 1.1.1 Working Mode The device has two working mode. one is Interval Scan Mode ,In this mode ,if reader Power on ,it will scan the tag intermittently;The other mode is Trigger Mode, in this mode, only if the voltage of the Trigger Pin is logic 0,the reader begins to scan the tag automatically. When reader enters into the scanning status, it will capture the programmed identification information of the tags which within the L5121’s read range automatically, and transmits the data to a local host computer or process through the specified communication interface (RS232 or RS485). The default working mode of the reader is Interval Scan Mode if need preconfigured to Trigger Mode or other communication interface, please consult with the Hawkvor before purchasing. 1.1.2 Parameters The parameters of the reader as Table 1.1.2-1 User Manual Table 1.1.2-1 Parameter Value Operating Frequency 902~928 MHz FHSS Transmitter Power 0 to 20dBm (programmed by software) Supply Voltage 10~25 VDC +5%/-1%, Ripple: maximum 50 mV Communication Rates 9600 bps Power Consumption maximum 10 W Interfaces Optional RS232,RS485 Overall Size 370* 360 * 96 mm Package Size 430 * 420 * 190 mm Net Weight: 3.0 KGS 10 Operating Temperature -20°C to +70°C 11 Storage Temperature -40°C to +85°C No 1.2 System Description 1.2.1 Components The package of the reader contents the components list in the Table 1.2.1-1. Table1.2.1-1 Component Specification Quantity Remark Host 370* 360 * 96 mm 1 PC With Fixed Holder Power Adapter 12V/4A 1 PC Power Code 1.8 m in length 1 PC RS232 Cable Test Tag Definition of Connection Pins 1 PC Packing List 1 PC No 1 PC 86 * 54 * 1.0 mm 1 PC Optional 1.2.2 Host Over view Side view Back view User Manual 1.2.3 Interface .Hawkvor Reader L5121 can be able to provide 5 group interface, for details please refer to Table 1.2.3-1 Table 1.2.3-1 Definition of the Interface Interface Type No Power RS232 RS485 Wiegand Trigger Definition Color Remark +12 V Red Two-core GND Black Two-core 232(RX) Grey 2-Pin 232(TX) Blue 3-Pin GND Yellow 485+ White 485- Light Green GND Yellow W0D0 Purple W0D1 Green GND Yellow Trigger Orange Reserved GND Yellow Mode Reserved for RS485 Reserved for Trigger 1.2.4 LED Indicator There are two rows LED indicators on the Hawkvor Reader Model L5121, when Red LED lighting means the reader is power on, while Blue LED lighting means t the reader captures the data of the tag, 1.2.5 Buzzer When the reader captures the data of the tag, the buzzer will beep. 1.2.6 Label Label Type Definition Position SN Label The serial number of the host Bakc Board Interface Label The specified communication interface of the host Back Board Capital Letter Label A or B or C or D or E Back Board No Remark: User Manual 1. The SN label is the identification of each reader, don’t tear off during using. 2. Please check the interface configuration with the Interface Label, if not correct, please contact with Hawkvor. 3. Don’t install two hosts with the same Capital Letter Label within 20 meters scope. 1.3 Cautions before Using 1. Please use the 12V 4A DC Power Adapter which enclosed the package for connecting the host with the power. 2. 12V 4A DC Power Adapter which enclosed the package is not waterproof, you need to be covered when used. 3. The power code which connected Power Adapter and the 220V AC Power needs to be connected the ground wire to prevent lightning strikes. 4. Please make well the insulation protection between different wires to prevent the short circuit damage. 5. Please read this instruction manual carefully before installation. 2 Reader Installation 2.1 Installation Overview The Reader has been designed with easy installation in mind. The Figure 2.1-1 provides you with any details that you will need to know. Figure 2.1-1 Installation 2.2 M User Manual 2.2 Installation Summary There are two ways for installing the reader by install position. One installs on the side of the lane which we called Side Installation, while the other installs on the overhead of the lane which we called Overhead Installation. For details please refer to the Table 2.2-1 Table 2.2-1 Install Way Advantage Side Installation Disadvantage 1. Easy to install with the pole 1.The read range is subject to the install height & the 2. Easy for maintenance angle of the reader 2. The tag should installed to the side near the reader Overhead Installation 1. The reader range is larger & wider 1. It’s not easy for maintenance due to the install 2. The tag position is more flexible height of the reader. 2. The extension power wire & communication wire requires longer & thicker When the site meets following conditions, we suggest choosing the Overhead Installation way, otherwise choosing the Side Installation way: 1. There are many types of car, especially with both large vehicle and small car; 2. The position of the tag is different from different type of vehicles; 3. The drive position is available for both left and right side Appendix 1 How to check the performance simply? Purpose: When a malfunction occurs during the using, the follow steps will help you to check the performance of the reader simply. 1. Test Sites: Open area without any barrier or block. 2. Reader Install Height: Over 2 Meter and power the reader with Power Adapter & Power Code enclosed the package. 3. Test Tag: use the tag MICE5510 enclosed the package
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 7 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5e7b9ee4-555a-4ab1-9964-b6e1132e33d3 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2012:08:30 10:11:06+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:08:30 13:58:43-07:00 Metadata Date : 2012:08:30 13:58:43-07:00 Document ID : uuid:526cfc75-efbd-46e4-8fbf-6b235f30f3fe Instance ID : uuid:2b97a449-c2fe-452a-ab49-979c33634ac2 Format : application/pdf Title : Microsoft Word - 2-User Manual-不OK,里面描述.doc Creator : a Author : aEXIF Metadata provided by EXIF.tools