Winmate 500 Rugged PDA User Manual Winmate E500RM8 Industrial PDA
Winmate Inc. Rugged PDA Winmate E500RM8 Industrial PDA
Winmate >
Users Manual
5” Industrial PDA E500RM8 Series User Guide Version 1.0 Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s)conveys no license or title under any patent, copyright, or masks work rights to these products, and make no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or guarantee that such application will be suitable for the specified use without further testing or modification. Warranty Our warranty guarantees that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the customer discovers a defect, we will, at his/her option, repair or replace the defective product at no charge to the customer, provide it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service. If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December). For example, the serial number 1W16Axxxxxxxx means October of year 2016. Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call: roduct serial number oftware (OS, version, application software, etc.) escription of complete problem he exact wording of any error messages In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. A note is used to emphasize helpful information. OTE An important note indicates information that is important IM for you to know. PORTANT CAUTION A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem. An Electrical Shock Warning indicates the potential harm from electrical hazards and WARNING! how to avoid the potential problem. ii Read Me First Safety Information Follow and adhere to all warnings and instructions in this manual. For your safety, please read all safety and operating instructions before using the product. Keep this manual for future reference. General Product Safety Sécurité générale des produits This product should not be used near water such as bathtubs, sinks, swimming pools, wet basement, etc. Ce produit ne dois pas être utilisé près de l'eau comme les baignoires, les éviers, les piscines, les sous-sols humides, etc. Do not block any ventilation openings. Do not place the product against a wall or in an enclosed space as doing so might impede the flow of cooling air. Ne pas bloquer les ouvertures de ventilation. Ne pas placer le produit contre un mur ou dans un espace clos de façon à entraver la circulation de l'air de refroidissement. Do not place the product near any heat sources such as radiators, warm air intakes, stoves or other heat-generating devices (including amplifiers or other heat producing equipment). Ne pas placer le produit près d'une source de chaleur comme des radiateurs, les arrivées d'air chaud, poêles ou autres produits générant de la chaleur (y compris les amplificateurs ou autre équipement produisant de la chaleur.) Do not disregard the safety that a polarized or grounded connection can provide. A polarized connection consists of two plugs, one of which is larger than the other. A grounded connection has two blades and a third one that is grounded. If the main plug provided cannot be inserted into your outlet, consult an electrician to replace your obsolete outlet. Ne pas ignorer la sécurité qu'une prise polarisée ou une prise de terre peut prévoir. Une prise polarisée se compose de deux fiches, dont l'une est plus large que l'autre. Une prise de terre possède deux lames et une troisième qui est la terre. Si la fiche principale fournie ne peut être insérée dans votre prise, consultez un électricien pour remplacer votre prise obsolète. Protect the power cord from being crushed or pinched, particularly in the area of the plugs, any receptacles used, and the point of exit from the apparatus. Do not break off the ground pin of the power cord. Empêcher le cordon d'alimentation d'être écrasé ou pincé, en particulier dans les zones de prises, des containers utilisés, et du point de sortie de l'appareil. Ne pas casser la broche de terre du cordon d'alimentation. iii Use only accessories specified by the manufacturer. Utiliser uniquement les accessoires spécifiés par le fabricant. Use only with its transport carriage, stand, tripod, console or table specified by the manufacturer or sold with the product. When using a carriage, move the carriage assembly with the product carefully to avoid damage from falling over. Utiliser uniquement avec son chariot de transport, support, trépied, console ou table spécifiés par le fabricant ou vendu avec le produit. Lors de l'utilisation d'un charriot, déplacez l'ensemble chariot avec le produit avec soin pour éviter tout dommage de chute. Unplug this apparatus during lightning storms or when it is not being used for long periods. Débrancher cet appareil durant les orages ou lorsqu'il n'est pas utilisé pendant de longues périodes. Refer all servicing to qualified service personnel. A technical intervention is required when the apparatus has been damaged in any way, for example if the power cord or plug is damaged, liquid has been spilled or objects have fallen inside the unit, if the product has been exposed to rain or moisture, if it does not operate normally or if it has been dropped. Confier toute réparation à du personnel qualifié. Une intervention technique est nécessaire lorsque l'appareil a été endommagé de quelque façon, par exemple si le cordon d'alimentation ou la fiche est endommagé, du liquide a été renversé ou des objets sont tombés à l'intérieur de l'unité, si le produit a été exposé à la pluie ou à l'humidité, s'il ne fonctionne pas normalement ou s'il a été jeté. Precaution on Battery Pack Précaution avec le bloc-pile Do Not Expose the Battery Pack to Excessive Heat, or Extreme Heat (Near Fire, in Direct Sunlight for example) Generation of heat, ignition or rupture may result Ne pas exposer le bloc-pile à une Chaleur Excessive, ou une Chaleur Extrême (Près d'un feu, sous la lumière du soleil par exemple) Une production de chaleur, l'amorçage ou la rupture peuvent être occasionnés iv Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte leakage, generation of heat, ignition or rupture may result. Ne pas démonter, modifier, ou insérer des objets pointus à l'intérieur du bloc-pile. Une fuite d'électrolyte, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés. Do Not Short the Positive (+) and Negative (-) Terminals of the Battery. Generation of heat, ignition or rupture may result. When carrying or storing the device, do not place the battery pack together with articles that may contact electricity. Ne pas court-circuiter les bornes Positive (+) et Négative (-) de la pile, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés. Lors du transport et du rangement de l'appareil, ne pas placer le blocpile en même temps que des articles pouvant créer un contact électrique. Do Not Apply Shocks to the Battery by Dropping It or Applying Strong Pressure to It. Electrolyte leakage, generation of heat, ignition or rupture of battery may occurs. Ne pas faire subir de choc à la pile en la laissant tomber ou en appliquant une forte pression dessus. Une fuite d'électrolyte, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés. Do Not Charge the Battery Other Than Methods Those Specified In This Manual. If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result. Ne pas charger la pile par d'autres méthodes que celles spécifiées dans ce manuel. Si la pile n'est pas chargée en utilisant l'une des méthodes spécifiées, une fuite d'électrolyte, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés. When the Battery Pack Has Deteriorated, Replace It with a New Battery. Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture. Lorsque la pile est détériorée, la remplacer par une nouvelle pile. L'utilisation continue d'une pile endommagée peut occasionner une génération de chaleur, l'amorçage ou la rupture de la pile. Do Not Use the Battery Pack With Any Other Products. The battery pack is rechargeable and is only designed for this specific product. If it is used with a product other than the specified product, electrolyte leakage, generation of heat, ignition or rupture may result. Ne pas utiliser avec un autre produit La batterie est rechargeable et a été conçue pour un produit spécifique. Si elle est utilisée sur un produit différent de celui pour lequel elle a été conçue, des pertes d’électrolytes et une production de chaleur sont possibles, elle risque également de prendre feu ou de casser. Do Not Use This Product With Battery Other Than the One Specified. Ne pas utiliser ce produit avec une batterie autre que celle spécifiée Exposure to Radio Use E500RM8 is equipped with Bluetooth, Wi-Fi and Cellular modem radio. In some situations or areas, user may be required to turn off the radios. For example: User’s needs to turn the phone OFF when in an area posted “TURN OFF RADIO SIGNAL.” to avoid interfering with blasting operations. User needs to turn OFF the radio signal in health care facilities. Hospitals or health care facilities may be using devices that sensitive to Radio Frequency energy. Aviation authority regulations prohibit user from using phone while in the aircraft. In order to prevent the handheld from emitting radio signals, do the following steps: To turn off the device: Press and hold the power button to display the Phone Options menu for 3 sec then tap the POWER OFF To set the device into airplane mode: Press and hold the power button to display the Phone Options menu for 3 sec then tap AIRPLANE MODE To turn off the Communication options e.g. Bluetooth, Wi-Fi, cellular modem radio: Select MENU , tap SETTINGS , and then tap WIRELESS & NETWORKS. If any radios are on, tap them to uncheck all the radios’ checkboxes in the devices. vi on. RF Exposure Information This PDA meets the government’s requirement for exposure to radio waves. This PDA is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/Kg. Test for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the PDA is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer user to a wireless base station antenna, the lower the power output. For body worn operation, this PDA has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions of the handset minimum of 1.5 cm from the body. User of other enhancements may not ensure compliance with FCC RF exposure guidelines. If user do not use a bodyworn accessory and are not holding the PDA at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched vii Electrostatic Discharge CAUTION Please follow proper electrostatic discharge precaution to prevent static damage that can harm electronic components inside your device. Driving Using mobile device or accessories while driving may cause distraction and can be illegal in some areas where you drive. Please obey the laws and regulations on the use of mobile device Handling and Maintenance Follow and adhere to all warnings and instructions in this manual. For the longevity of the product usage, please read all operating instructions before using the product. Keep this manual for future reference. General Guideline Guide Général Keep the product at least 13 cm (5 inches)away from electrical appliances that can generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker. Garder le produit au moins à 13 cm (5 pouces) de distance des appareils électriques qui peuvent générer un fort champ magnétique comme une télévision, un réfrigérateur, un moteur, ou un important haut-parleur. Cleaning Guideline Guide de nettoyage Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the product. Utiliser un chiffon doux humidifié avec de l’eau ou un détergeant non alcalin pour essuyer l'extérieur du produit. Do not place heavy objects on top of the tablet computer as this may damage the display. Ne pas placer d'objets lourds sur le dessus de l'ordinateur tablette cela peut endommager l'écran. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the product. The screen surface can be easily scratched. Use with care. Do not use paper towels to clean the display but use the included cleaning cloth. Avoid touching it with a pen or pencil. Essuyer délicatement l'écran avec un chiffon doux non pelucheux. Ne pas utiliser d'alcool ou un détergent sur le produit. La surface de l'écran peut être facilement rayée. Utiliser avec précaution. Ne pas utiliser de serviette en papier pour nettoyer l'écran mais utiliser le chiffon de nettoyage inclus. Éviter de toucher avec un stylo ou un crayon. To maximize the life of the backlight in the display, allow backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that prevents the power management from working. Pour maximiser la durée de vie du rétroéclairage de l'écran, autoriser le rétroéclairage résultant de la gestion de l'alimentation. Éviter d'utiliser un économiseur d'écran ou un autre logiciel empêchant la gestion de l'alimentation de fonctionner. Touchscreen Guideline Guide de l'écran tactile Use your finger or the stylus on the display. Using sharp or metallic object may cause scratches and damage the display, thereby causing errors. Utiliser votre doigt ou le stylet sur l'écran. L'utilisation d'un objet pointu ou métallique peut provoquer des rayures. viii Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To clean off hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. Utiliser un chiffon doux pour enlever la poussière sur l'écran. La surface de l'écran tactile a un revêtement protecteur spécial empêchant la saleté de se coller à lui. Ne pas utiliser un chiffon doux peut endommager le revêtement spécial sur la surface de l'écran tactile. Pour nettoyer les saletés plus difficiles à enlever, souffler de la buée sur la zone particulière et essuyer doucement avec un chiffon doux. Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break. Ne pas utiliser une force excessive sur l'écran. Éviter de placer des objets au dessus de l’écran cela pourrait provoquer une cassure du verre. ix When there is a noticeable discrepancy in the operation of the touchscreen function (your touch does not correlate to the proper location on the screen), recalibrate the touchscreen display. Lorsqu'il y a un écart sensible dans le fonctionnement de l'écran tactile (votre contact ne correspond pas à la bonne position sur l'écran), recalibrer l'écran tactile. Important Information Countries/ Area Symbol This equipment complies with essential requirements of: Electromagnetic Compatibility Directive(2014/30/EU) European Union Low Voltage Directive (2014/35/EU) Radio and Telecommunication Terminal Equipment (R&TTE) Directive (2014/53/EU) USA FCC Part 15 Subpart B Regulations Class B CANADA ICES-003 ICES-003 — Information Technology Equipment (Including Digital Apparatus) EC Declaration of Conformity This equipment is in conformity with the requirement of the following EU legislations and harmonized standards. Product also complies with the Council directions. Electromagnetic Compatibility Directive (2014/30/EU) EN55032: 2012/AC:2013 EN55024: 2010 EN610000-3-2: 2014/EN610000-3-3: 2013 Low Voltage Directive (2014/35/EU) EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013 The Radio Equipment Directive (2014/53/EU) ETSI EN 300 328 V1.9.1(2015-02) ETSI EN 301 489-1 V1.9.2(2011-09)/ETSI EN 301 489-3 V1.6.1(2013-08)/ETSI EN 301 489-17 V2.2.1(2012-09) ETSI EN 300 440-1 V1.6.1(2010-08)/ETSI EN 300 440-2 V1.4.1(2010-08) EN 50566:2013/AC:2014/EN62479:2010 Hereby, Winmate Inc. declares that the radio equipment type (Rugged PDA E500RM8) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.winmate.com.tw/ xi Federal Communications Commission Radio Frequency Interface Statement This mobile phone complies with part 15 of the FCC Rules.. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Note: Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.11992 and had been tested in accordance with the measurement methods and procedures specified in xii IEEE1528. This device has been tested and meets the FCC RF exposure guidelines when tested with the device directly contacted to the body. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: PX9500 For this device, the highest reported SAR value for usage near the body is 0.305 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 0 mm between the unit and the human body. IC NOTICE TO CANADIAN USERS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause interference, and (2) This device must accept anyinterference, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmfulinterference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de laClasse B conforme à la norme NMB-003 du Canada). The SAR limit of CANADA (IC) is 1.6 W/kg averaged over one gram of tissue. Device has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly near the body is 0.472W/kg. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement. la limite de sar du canada (ic) est de 1,6 w / kg en moyenne pour un gramme de tissu.dispositif a également été testé contre cette limite de das.la valeur de r - s en vertu de cette norme plus élevée au cours de la certification de produits déclarés correctement 0.472w/kg près du corps xiii Contents PREFACE.............................................................................................................................................................................................. I READ ME FIRST................................................................................................................................................................................. III SAFETY INFORMATION........................................................................................................................................................................ III EXPOSURE TO RADIO USE................................................................................................................................................................... VI RF EXPOSURE INFORMATION.............................................................................................................................................................. VII ELECTROSTATIC DISCHARGE................................................................................................................................................................ VII DRIVING.......................................................................................................................................................................................... VII HANDLING AND MAINTENANCE........................................................................................................................................................... VII ABOUT THIS USER GUIDE................................................................................................................................................................ 12 CHAPTER 1 GETTING STARTED........................................................................................................................................................12 INTRODUCTION................................................................................................................................................................................ 12 PRODUCT FEATURES......................................................................................................................................................................... 12 UNPACKING.................................................................................................................................................................................... 12 DESCRIPTION OF PARTS.....................................................................................................................................................................12 Front View...............................................................................................................................................................................12 Rear View................................................................................................................................................................................12 Dimensions............................................................................................................................................................................. 12 GETTING STARTED............................................................................................................................................................................12 SD Card Installation................................................................................................................................................................ 12 Battery Installation................................................................................................................................................................. 12 Charging the Battery.............................................................................................................................................................. 12 TURNING ON AND OFF THE DEVICE.................................................................................................................................................... 12 Turning ON..............................................................................................................................................................................12 Turning OFF............................................................................................................................................................................ 12 RESETTING TO FACTORY DEFAULTS......................................................................................................................................................12 CHAPTER 2 USING THE E500RM8....................................................................................................................................................12 USING THE TOUCH SCREEN................................................................................................................................................................12 WAKING UP THE PHONE................................................................................................................................................................... 12 USING THE HOME SCREEN.................................................................................................................................................................12 Personalizing Home Screen.................................................................................................................................................... 12 Viewing other parts of the Home Screen................................................................................................................................12 STATUS AND NOTIFICATION ICONS...................................................................................................................................................... 12 Notification Icons....................................................................................................................................................................12 Status Icons.............................................................................................................................................................................12 USING THE ON-SCREEN KEYBOARD..................................................................................................................................................... 12 Entering Text...........................................................................................................................................................................12 Editing Text............................................................................................................................................................................. 12 DISPLAY SETTINGS............................................................................................................................................................................ 12 AUDIO PROFILE SETTINGS..................................................................................................................................................................12 Sounds Settings.......................................................................................................................................................................12 Adjusting Volume................................................................................................................................................................... 12 LANGUAGE AND KEYBOARD SETTINGS..................................................................................................................................................12 Changing the Keyboard Language......................................................................................................................................... 12 ABOUT PHONE................................................................................................................................................................................ 12 CHAPTER 3 USING WINMATE® HOME MANAGER (WHM)............................................................................................................ 12 HOW TO LOCK APPLICATIONS.............................................................................................................................................................12 HOW TO UNLOCK APPLICATIONS........................................................................................................................................................ 12 HOW TO CHANGE PASSWORD............................................................................................................................................................12 CHAPTER 4 CONNECTING TO NETWORK AND DEVICES................................................................................................................. 12 CONNECTING TO WI-FI NETWORKS.....................................................................................................................................................12 Turning ON the Wi-Fi and Connecting to Wi-Fi networks...................................................................................................... 12 Adding Wi-Fi Network............................................................................................................................................................ 12 CONNECTING TO BLUETOOTH DEVICES.................................................................................................................................................12 Turning Bluetooth ON or OFF................................................................................................................................................. 12 Connecting to Bluetooth Device............................................................................................................................................. 12 Disconnecting Bluetooth Device............................................................................................................................................. 12 CONNECTING TO COMPUTER VIA USB.................................................................................................................................................12 USB Computer Connection..................................................................................................................................................... 12 USB Debugging Settings......................................................................................................................................................... 12 CHAPTER 5 USING CAMERA............................................................................................................................................................ 12 CAPTURING PHOTOS OR VIDEO.......................................................................................................................................................... 12 Opening Camera.....................................................................................................................................................................12 Taking pictures....................................................................................................................................................................... 12 Switching between front and rear cameras........................................................................................................................... 12 Viewing pictures..................................................................................................................................................................... 12 Shooting videos.......................................................................................................................................................................12 Opening the Gallery................................................................................................................................................................12 CHAPTER 6 CAPTURING DATA........................................................................................................................................................ 12 USING BARCODE READER.................................................................................................................................................................. 12 Location.................................................................................................................................................................................. 12 Android Winmate® Data Collection (WDC)............................................................................................................................ 12 Where To Find WDC?..............................................................................................................................................................12 How to Turn On/Off the Power of Barcode Reader................................................................................................................12 How to change the symbologies of Barcode.......................................................................................................................... 12 How to add command to my output of the barcode..............................................................................................................12 How to change the scan type for the Barcode Reader...........................................................................................................12 How to change the setting of the application WDC or reset the setting back to default...................................................... 12 Scanning the barcode............................................................................................................................................................. 12 Scanning Tips and Considerations.......................................................................................................................................... 12 USING SMART CARD READER............................................................................................................................................................. 12 Location.................................................................................................................................................................................. 12 How to Use Smart Card Reader.............................................................................................................................................. 12 Smart Card Reader SDK.......................................................................................................................................................... 12 USING FINGERPRINT SCANNER........................................................................................................................................................... 12 Location.................................................................................................................................................................................. 12 CHAPTER 7 ACCESSORIES................................................................................................................................................................ 12 STANDARD ACCESSORIES................................................................................................................................................................... 12 Power Adapter........................................................................................................................................................................12 Micro USB Cable..................................................................................................................................................................... 12 Micro SD Card......................................................................................................................................................................... 12 Hand Strap..............................................................................................................................................................................12 OPTIONAL ACCESSORIES.................................................................................................................................................................... 12 Two Slot Battery Charger....................................................................................................................................................... 12 Micro USB Host Cable (OTG Cable).........................................................................................................................................12 Mobile Printer.........................................................................................................................................................................12 APPENDIX A: PRODUCT SPECIFICATIONS....................................................................................................................................... 12 APPENDIX B: ORDERING INFORMATION........................................................................................................................................12 APPENDIX C: SOFTWARE DEVELOPMENT KIT.................................................................................................................................12 APPENDIX D OS IMAGE UPDATE.....................................................................................................................................................12 E500RM8 User Guide About This User Guide This User Guide provides information about using the Winmate® E500RM8 and accessories. NOT Some pictures in this guide are samples and can differ from actual product. Documentation Set The documentation set for the E500RM8 provides information for specific user needs, and includes: E500RM8 Quick Start Guide - describes how to get the E500RM8 up and running. E500RM8 User Guide – contains detailed description on how to use the E500RM8, its components and features. Chapter Descriptions Chapter 1, Getting Started provides basic instructions on how to use E500RM8, including SD card and battery installation, powering on and resetting E500RM8. Chapter 2, Using the E500RM8 provides basic instructions on using the E500RM8. Chapter 3, Using Winmate Home Manager explains how to use WHM to lock the launcher. Chapter 4, Connecting to Network and Devices explains how to connect E500RM8 to networks, Bluetooth devices, and computer. Chapter 5, Using Camera provides instructions on how to use camera on E500RM8. Chapter 6, Capturing Data provides information on how to use Barcode Reader, Smartcard Reader and Fingerprint Scanner that might be present in E500RM8. Chapter 7, Accessories describes the available accessories and how to use them with the E500RM8. Chapter 1Getting Started Chapter 1 Getting Started This chapter tells you information about Winmate® E500RM8 PDA, its highlighted features, and provides basic instructions for using the E500RM8, including powering on and resetting the E500RM8. Introduction Thank you for purchasing Winmate® E500RM8 Industrial PDA. Winmate® E500RM8 Industrial PDA is an enterprise-class PDA with powerful mobile computing solution. The E500RM8 PDA brings a new level of flexibility, functionality and rugged design to pocket-sized mobile devices, providing task workers and managers with the power to streamline business processes, increasing productivity and improving customer service. The E500RM8 packs WLAN, Bluetooth, and GPS function - all into a single device. With great multiple wireless communicate design, this product will be applicable to mobile worker, business application, and IT requirements. Product Features Winmate® E500RM8 Industrial PDA features: ARM® Cortex™-A53 Octa-core 1.3 Ghz Memory includes 2 GB RAM LPDDR3 and 16 GB eMMC Support extra Micro SD card and maxima to 32 GB 5.0-inch capacitive multi-touch display offers 1280 x 720 pixel resolution Bluetooth 4.0 Support BLE mode +wide-band speech Wi-Fi 802.11 b/g/n Built-in GPS module supports GPS, GLONASS and BeiDou, LNA on board with passive ANT Dual cameras include 2MP front side and 8MP rear side Support 1D/2D Barcode Reader, Fingerprint Scanner, and Smart Card Reader as option. Unpacking If any of the following items are missing or damaged, contact us. Standard packing list includes: E500RM8 User Guide E500RM8 Quick Start Guide (Hardcopy) Li-ion Battery Micro USB Cable Micro SD Card (4GB) *Adapter Input: AC 100-240V 50/60 Hz Output : 5V-2A Hand Strap * Adapter socket varies by country and region. E500RM8 will be shipped with the socket according to your order. Your package may include optional accessories based on your order. To see the list of available accessories and its specifications, refer to Chapter 7 of this User Guide. Chapter 1Getting Started Description of Parts Front View Description of Parts: E500RM8 User Guide No Item Description LED Indicator LED indicator indicates the battery power or charging status Light Sensor Proximity Sensor 5” IPS Display Displays all information needed to operate the device. 2MP Front Camera To capture a front view picture and use for Video call. Function Key Use to trigger the barcode reader for E500RM8 with barcode reader (differs by product type) All Around Elastomeric Rubber Protects the device from water and dust Volume Up / Down Increases or decreases the call volume when a call is in progress. In other applications, it controls the volume of music or Optical Bonded Touch Screen Light sensor detect the availability of light and automatically control the brightness of a screen backlight intensity Proximity function is used specifically towards near field proximity applications. In mobile phones, the proximity detection can detect when the user positions of mobile phone is close to their ear Optical bonding provides better sunlight reading ability Back Opens a home screen 10 Four Physical Buttons 11 Smart Card Reader Opens a menu with items that affect the current screen or application *Use to trigger the Barcode Reader for E500RM8 with Barcode Reader (differs by product type) To obtain card information and perform a transaction. *Note: Fn key function s may be progra mmed accordi ng to your order. Chapter 1Getting Started Rear View Parts Description: E500RM8 User Guide No Item Description Pogo-pin Pogo-pin can be used for charging & extension function Removable Battery Removable battery Micro SD Card Slot Allows installing micro SD card Hand Strap Slot To install hand strap 8MP Rear Camera To capture a rear view picture and use for making videos. Fingerprint Reader (optional) Allows scanning fingerprints Barcode Reader (optional) 1D/2D Barcode Reader (*Will change to flat cover when without barcode) Press and hold the button for 3 seconds to turn on E500RM8. Press to turn on/off the screen. Press and hold the button for 3 seconds to select: •POWER OFF –to turn off the device press button for 8 Sec to force system power off •AIRPLANE MODE –to disable all wireless connection •SILENT MODE – to disable all the sounds except for the alarms •VIBRATION MODE – to vibrate all the notifications across the entire device •NORMAL MODE – Return to the user setting mode Press and hold the button for 8 seconds to reboot the device. Use to trigger the barcode reader for E500RM8 with barcode reader (differs by product type) Power Button Function Key 10 Micro USB Use for communication with peripheral devices. 11 DC Jack Use for charging Dimensions Chapter 1Getting Started *Note: Measurements shown in mm. **Note: this is a simplified drawing and some components are not marked in detail. Getting Started To start using the E500RM8 for the first time: Install Micro SD Card Install the Battery Charge the E500RM8 Power on the E500RM8 Configure the E500RM8 SD Card Installation To Install the SD Card: 1. Place the E500RM8 facing down. 2. Press the two latches up and removable the battery. E500RM8 User Guide 3. Locate the SD card holder. 4. Push the SD card holder in the direction of the arrow to unlock it. 5. Pick and raise the SD card holder up in upright position and then put the SD Card into the socket. Battery Installation Inserting the standard Battery Pack into the device: 1. 2. 3. 4. 5. Disconnect AC adapter and power cord from the device. Turn the device over, back facing up. Locate the Battery Lock Latch and push it to the “Unlocked” position. Locate the Battery Release Slider that is spring-loaded. Pull back and hold. Insert the battery on the connector-pins side first, and then lower the battery into the battery compartment. Continue to hold the Battery Release Slider before battery is fully inserted. 6. Make sure the battery is completely lowered into the compartment before letting go the Battery Release Slider. Battery will be flat against the housing once fully inserted. Reinsert the battery by latching the bottom first (1) and then pushing the battery pack down (2). Chapter 1Getting Started Check the battery latch: CAUTION Removing the Battery Pack: 1. Power off the PDA. Disconnect any cords connected to the device. 2. Turn the PDA over, back facing up. 3. Locate the Battery Lock Latch and push it to the “Unlocked” position. 4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold. 5. Lift the battery out using the opening on side of battery compartment. Charging the Battery Please charge the battery before using the PDA for the first time, charge the battery until the LED indicator turns solid green. To charge the E500RM8, use a cable or a docking with appropriate power supply. For more information about the E500RM8 accessories, refer to Chapter 7. LED Status Indicator OFF E500RM8 is not charging or not properly connected Solid Red Charging in progress Continuously Flash Red Indicates low battery status (below 15%*) Twice Flash Red Solid Green *Connect to the power source or the system may shut down Not enough power for the device to turn on **Charge the device until the LED indicator becomes solid red (Indicates the battery is charged more than 3%) Charging complete 10 E500RM8 User Guide Charging the battery using DC Jack cable 1. Connect the power supply output connector to the input power port on the DC Jack cable. 2. Remove the protective rubber and connect the DC Jack cable to the side of E500RM8. The battery charge LED indicates the battery charging status. Charging the battery using Battery Charger Connect the battery charger dock to power, insert the battery into the slot to begin charging. This docking provides input: 12V/36W DC in. Turning On and Off the Device This section describes how to turn on/ off the device. Turning ON 11 Chapter 1Getting Started 1. Press and hold the power button for 3 seconds, located on the right side of the unit. 2. When the device vibrates, release the power button. The desktop screen is displayed. Turning OFF 1. To turn off the device, press and hold the power button until the phone options menu appears, tap the Power Off. 2. User can also use the Phone options menu to put the device into silent or airplane mode, see features table. 12 E500RM8 User Guide Resetting to Factory Defaults To reset the device to factory defaults: 1. Tap Menu , than tap Settings 2. In the Personal tab, tap Backup & Reset. 3. User can select to back up application data, Wi-Fi passwords and other settings to Google servers by tapping Backup My Data. 4. Tap Factory Data Reset to reset the phone. 5. Read all the available information and then check Erase phone storage if user wants to erase all the data on the phone storage such as music or photo. 13 Chapter 2Using the E500RM8 Chapter 2 Using the E500RM8 This chapter explains how to use the buttons, status cons, and controls on E500RM8 PDA running on Android 5.1 Operating System, provides instructions on entering and capturing data. Using the Touch Screen The touchpad supports the core gestures for Android. Gesture Tap Action Description To select or activate something Tap & Hold Touch and hold an item on the screen by touching it and not lifting your finger until it respond Touch, Hold &Drag Touch and hold an item for a moment and then without lifting your finger, move your finger on the screen until you reach the target position. i.e. moving the apps around the home screen Quickly move the finger across the surface of the screen. i.e. slide a lock screen to open the lock Swipe or slide Double-tap Tap quickly twice on a webpage, screen, or App to zoom Scale Place two finger on the screen and pinching them together Rotate Two-finger press, simultaneously orbit both fingers around the center point, lift. 14 E500RM8 User Guide Waking Up the Phone If you do not use the phone for a while, the screen dims and then darkens to conserve the Battery. To wake up the phone: 1. Press the Power button on the right side of the PDA. 2. Drag the lock icon up. Using the Home Screen Home screen is the starting point to access all the features on your PDA Device. It displays application icons, widgets, shortcuts, and other features. User can personalize the home screen. See “Personalizing home screen”. Personalizing Home Screen 15 Chapter 2Using the E500RM8 User can add application icons, shortcuts, widgets, and other items to any part of any Home screen where there is free space. User can also switch the wallpaper. To change wallpaper on the HOME SCREEN: 1. Tap MENU , and then open Settings 2. In the Device tab, tap Display > Wallpaper. 3. In the Wallpaper menu select the location of wallpaper, and then tap the type of item you want to add. 16 E500RM8 User Guide To move an item on the HOME SCREEN: 1. Tap and hold the item you want to move, until it can be moved. 2. Drag it to a new location on the screen. 3. Place the item where you want to put it and lift your finger. To remove items from the HOME SCREEN: 1. Tap and hold the item you want to remove. The launcher icon will show Remove on the top of the screen. 2. Drag the item you want to remove to the Remove icon. 3. When the icon turns red, release your finger. 17 Chapter 2Using the E500RM8 Viewing other parts of the Home Screen 1. Slide your finger left or right across the Home screen. Extensions to the Home screen provide extra space for APPS, shortcuts, and other items. 2. Tap the launcher icon to view the entire APPS of the device. The status bar appears at the top of every screen. On the left are notification icons and on the right are status icons, along with the current time. 18 E500RM8 User Guide Status and Notification Icons Notification Icons Pull down from the left top of the screen to get the notifications area. The following icons indicate that you have received notification. Status Icons Pull down from the right top of the screen to get the notifications area. The following icons indicate the status of your device, for example if users are connected to a Wi-Fi network that is not connected to the internet, the network icons are appears in white color. Status icons that appear in the status bar are as follows: 19 Chapter 2Using the E500RM8 Using the On-Screen Keyboard User will be able to enter text using the On-Screen Keyboard. Some applications will launch the keyboard automatically. In others, user needs to touch a text field where user wants to enter text to launch the keyboard. Entering Text 1. Open a text field.The On-Screen Keyboard opens. *If user taps in a text field which already contains text, the insertion point is set where user tap and the cursor appears. User can drag the cursor to pick exactly where you want to add more text. User can also select a word to copy, cut and paste it. See “Editing Text”. 2. Tap the delete key to erase characters to the left of the cursor. 3. Tap to enter numbers. Tap to return to letters. 4. To enter symbols and other characters, tap and hold one of the top-row keys and slide your finger up to the list of the options. Lift your finger when you find your selection. 20 E500RM8 User Guide 5. To view additional symbols, tap on the numeric keyboard. 6. To close the On-Screen keyboard, press the back button Editing Text To select text: 1. Double-tap the text you want to select. 2. Tap to select all the sentences in the menu that appears, the selected text is highlighted in blue, with a tab at each end of the selected word. 3. Drag selection tab to expand or reduce the range of the selected text. To Cut or Copy Text: 1. Select the text to cut or copy, see the section above “To select text”. 2. Tap 21 or in the Edit text menu. Chapter 2Using the E500RM8 3. If you select , the selected text is removed from the text field; it is stored in temporary area so that you can paste it into different text field. To Paste Text: 1. After Cut or Copy the text, see the section above “To Cut or Copy Text” 2. Place the cursor in the text field where you want to paste the text, user can paste text that you copied from one application into a text field in any application. 3. Tap and hold into the location that you want to paste. Tap PASTE in the menu that opens or user can also tap to replace the existing text with copied text. Display Settings Use the display settings to configure brightness and other screen settings. 1. Tap MENU and then tap Settings 2. In the Device tab, tap Display: Personalize o MiraVision™ - to display picture quality optimization options. o Wallpaper– to select wallpaper Display o Brightness level– for adjusting the brightness of the screen. Adaptive brightness – to optimize brightness level for available light Sleep– to set up the device on the sleep mode after one minutes of inactivity Daydream- to activate automatically when your device is docked or charging, keeping your screen on and displaying information. Daydream mode can give your device an always-on information display. 22 E500RM8 User Guide Battery Percentage– to control battery percentage display. Font size– for adjusting the font in the device. When device is rotated – for switching the orientation of the screen as user turn the device sideways or upright. Sleep– to inactivate the device after some time. Cast screen – allows displaying whatever is visible on the device's screen on another screen, mostly wirelessly using Wi-Fi as a medium for sharing the screen. NOT 23 For the longest battery life between charges, use the shortest Sleep time. Chapter 2Using the E500RM8 Audio Profile Settings Use the sound settings to configure how and at what volume the phone rings, vibrates or alerts user in other ways when user receive a call, receive a notification or an alarm sounds. Sounds Settings 1. Tap MENU and then tap Settings 2. In the Device tab, tap Sound & Notification and then user can select General, Silent, Meeting or Outdoor profile. Adjusting Volume 1. Press the volume keys to change the ring volume (On Home screen) or earpiece volume (during a call). 2. Press the volume key to set up Vibration mode. 24 E500RM8 User Guide Language and Keyboard Settings Use the Language & keyboard settings to select the language for the text on your phone and for configuring On-Screen Keyboard, including words that you have added to its dictionary. 1. Tap MENU and then tap Settings 2. In the Personal tab, select Language & Input. Language – to open the language screen, where user can select the language to use for the text on the device. Spell Checker – to activate Android Spell Checker (AOSP) and check to correct misspelled words. Personal dictionary- to open a personal dictionary. Keyboard & input methods o Current Keyboard – to apply the onscreen keyboard that is included with user’s device. o Android Keyboard (AOSP) – the setting screen is available only if user’s device has a physical keyboard. Appearance & layouts o Theme – to select the theme of layout o Custom input styles – user can select custom input style, such as QWERTY keyboard Text Correction o Personal dictionaries o Add-on dictionaries o Block offensive words – disable suggesting potentially offensive words o Auto-correction – spacebar and punctuation automatically correct mistyped words. o Show correction suggestions – display suggested words while typing. o Personalized suggestions – learn from your communications and typed data to improve suggestions. o Suggest contact names – use names from Contacts for suggestions and corrections. o Next-word suggestion – use previous word in making suggestion. Advanced o Key popup dismiss delay o Keypress vibration duration 25 Chapter 2Using the E500RM8 Changing the Keyboard Language The current keyboard language is displayed on the Space key and user can switch languages. 1. Tap and hold the space key 2. Without lifting the finger, slide it to the left or right until the language you want to use appears in the center of the small window above the Space Key. 3. Lift the finger to change the keyboard language. 26 E500RM8 User Guide About Phone About Phone includes information about user’s phone. System Update — provides information regarding the local or online update of your devices. Status — opens the status screen with a list of information about battery, network, signal strength and other details. Legal Information — lists details about the model number, Android Version, Baseband version etc. this information is useful if user need to work with support team. To access the information about the phone: 1. Tap MENU 2. Tap Settings 3. Scroll down to System, and then tap About phone. 27 Chapter 3Using Winmate Home Manager Chapter 3 Using Winmate® Home Manager (WHM) Every E500RM8 PDA comes with preinstalled APP named Winmate® Home Manager (WHM). This application lets the device manager to lock the launcher. When the launcher is locked the user can only use one application assigned by the device manager. How to Lock Applications Step 1 In the main APPS window, select the Home Manager APP and enable it. Select Home Manager to start your settings. Go to Password Manager and set your own password for this APP. The default password is “0000”. Step 2 Go to “Application Selector” and choose an Application to be locked. Example: Select the Calendar AP. 28 E500RM8 User Guide Step 3 Go back to “Home Selector” and press “Clear and Reset Default Home”. Step 4 Select “Restrict Home”, and then restart the PDA. Step 6System will ask to select “Just once” or “Always” to use this launcher, please select “Always”. 29 Chapter 3Using Winmate Home Manager The system will automatically start the application which you selected and lock it. Any time you press home key or back key, the system will go back to the same application which you have selected. How to Unlock Applications Step 1 Slide down the top bar and press “Home Manager” icon then you can find the menu and please enter the password to login (The default password is “0000”). 30 E500RM8 User Guide Step 2 Go back to “Home Selector” and press “Clear and Reset Default Home”. Step 3 Restart the system and you will go back to the normal Launcher. 31 Chapter 3Using Winmate Home Manager How to Change Password Step 1 Go to Password Manager and set your own password for this APP. Step 2 The default password is “0000”.Enter a new password in New Password field, and then tap Change Password. 32 E500RM8 User Guide Chapter 4 Connecting to Network and Devices This chapter explains how to connect PDA to network and peripheral devices. Connecting to Wi-Fi Networks Turning ON the Wi-Fi and Connecting to Wi-Fi networks 1. Tap MENU and then tap Settings 2. Tap Wireless & networks and then select Wi-Fi to turn it on 3. Tap Wi-Fi. The device scans for available Wi-Fi networks and displays the list of it. Secured networks are indicated with a lock icon. If the phone finds a network that you have connected previously, it connects to it automatically. 4. Tap a network to connect to it: If the network is open, you are prompted to confirm that you want to connect it by tapping Connect. If the network is secured, users are prompted to enter a password or other credentials. 1. To check the details about the speed, security, address and related settings, tap its name in the Wi-Fi settings screen. 33 Chapter 4 Connecting to Network and Devices Adding Wi-Fi Network 1. Turn on Wi-Fi, in the Wi-Fi settings screen, tap + icon (at the bottom right of the list of discovered networks). 2. Input the SSID (name) of the network, if the network is secured, tap the security menu and then tap the type of security deployed on the network. 3. Enter any required security credentials. 4. Tap Save. 34 E500RM8 User Guide Connecting to Bluetooth Devices Turning Bluetooth ON or OFF 1. Tap MENU and then tap System settings 2. Tap Wireless & networks and then select Bluetooth to turn it on. Connecting to Bluetooth Device 1. Go to Settings 2. Tap Wireless & networks, and then tap Bluetooth settings. 3. It will automatically scans and displays the IDs of all available Bluetooth devices in range. Tap SEARCH FOR DEVICES to search other Bluetooth devices. 4. Tap the ID of the other device in the list in Settings to pair them. Disconnecting Bluetooth Device 1. Tap the device in the Bluetooth settings screen. 2. Tap OK to confirm that you want to disconnect. 35 Chapter 4 Connecting to Network and Devices Connecting to Computer via USB User can connect their PDA to a computer with USB cable to transfer files between PDA and computer. IMPORTANT When connecting your PDA to a computer and inserting its USB storage or SD card, user must follow the computer’s instructions for connecting and disconnecting USB device, to avoid damaging or corrupting files. Notice that the E500RM8 cannot be charged via USB. USB Computer Connection 1. Enter setting menu , and enter select “Accessibility”, and then check “Connect to PC”. 2. Connect PDA to the computer via USB connector. 3. In the notifications area USB connected sign will appear. 4. Pull down the notification area to open notification panel. 36 E500RM8 User Guide 5. Tap this icon to choose the type of USB connection. USB storage –let user transfers files between computer and PDA. Media device (MTP) – let users transfer media files. Camera (PTP) – let users transfer photos using camera software, and transfer any files on computer that don’t support MTP. Charge only – stop all USB functions and let users speed up USB charging. Connect as CD-ROM. USB Debugging Settings To permit debugging tools on a computer to communicate with User’s PDA via USB Connection. 1. Connect PDA to the computer via USB cable. 2. In the notifications area USB debugging connect sign 3. Pull down the screen to open notification panel. 4. Tap USB debugging connected. 37 will appear. Chapter 4 Connecting to Network and Devices 5. In the Developer options user can choose the action to perform. Carefully follow your computer’s instructions to un-mount the USB storage or SD card. Disconnect USB device not properly can cause a loss of important data or information. IMPORTANT 38 E500RM8 User Guide Chapter 5 Using Camera This chapter explains how to use camera to capture photos and videos. Capturing Photos or Video Winmate® E500RM8 equipped with 8 MP on the rear side and 2 MP on the front side, which user can use to capture photos or video. Opening Camera 1. Tap the launcher and then tap Camera Camera opens in Portrait mode, ready to take a picture or shoot a video. Make sure the protective lens cover is clean before taking pictures. A lens cover with smudges from fingers can cause blurry pictures. IMPORTANT Taking pictures 1. Adjust the exposure, flash, and other necessary settings. Or leave it automatic. 2. Frame your subject / object on screen. User can set whether user want to use the front or rare camera, by taping . Scale the screen to zoom in or out. 3. Tap the On Screen Shutter icon 4. The camera brings the image into focus, when the image is in focus, the focus indicators in each corner will turn green and ready to capture. 5. Tap 39 to change camera settings. Chapter 5Using Camera Switching between front and rear cameras E500RM8 has both a front and rear camera, user can select which camera you want to preview and take pictures with. 1. Tap the On Screen Select Camera icon to switch between the rear camera and the front camera 2. The preview switches to show the scene viewed from the camera you selected. NOT Not all features (such as flash) are available for the front camera. Viewing pictures 1. After taking a photo, a thumbnail of the picture is shown on the corner of the capture screen. Tap the thumbnail to view it. 2. Tap the onscreen button: to share a photo. to delete a photo. to view other photos and videos in the gallery. 3. Swipe right or left to view more photos. Shooting videos 1. Tap the to start recording video. 3. The countdown time remaining to shoot is located on the upper left; when the time left is less than a minute, the countdown turns red. 4. Point the lens to record the scene where you want to start. Tap the icon again to stop shooting. The time remaining to shoot counts down at the left; when less than a minute is left, the countdown turns red. 40 E500RM8 User Guide Opening the Gallery 1. Tap the launcher and then tap Gallery 2. Tap a folder to view the pictures or video inside in full screen mode. 3. Flick the pictures left or right to view the previous or next picture. 41 Chapter 6Data Capture Chapter 6 Capturing Data This chapter explains how to use Barcode Reader and Android Winmate® Data Collection application, Smartcard Reader and Fingerprint Scanner on the E500RM8. Using Barcode Reader Location 1D/2D Barcode Reader is an optional feature for Winmate® E500RM8 and may not be present in your device. Barcode Reader is located on the top side of the PDA. Android Winmate® Data Collection (WDC) The E500RM8 with Barcode Reader comes with pre-installed software made by Winmate® - Winmate Data Collection (WDC) that allows users to turn on the readers and set up the button to trigger the scan function. Where To Find WDC? 1. Tap application menu 2. User can find the application Data Capture (WDC) on the menu screen, with the Globe mark 3. User can change the settings of the Barcode Reader through WDC application. 42 E500RM8 User Guide How to Turn On/Off the Power of Barcode Reader 1. Go to the WDC application. 2. Tap Barcode Setting 3. Once the user entered the WDC application, the device will automatically turn on the Barcode Reader. And the user can turn off the Barcode Reader by tapping Barcode Power Status: ON. 43 Chapter 6Data Capture How to change the symbologies of Barcode 1. Go to the WDC application. 2. Tap Barcode Settings 3. Tap Barcode Preference. 4. Users can change the symbologies of the barcode: 1D Symbologies 2DSymbologies Imager Options User Preference Disable all symbologies. How to add command to my output of the barcode 1. Go to the WDC application. 2. Tap Prefix / Suffix. 3. Enter special characters at the beginning (prefix) or end (suffix) of the scanned barcodes. 4. Tap Set to add into the data. The output will show the command that you entered in the prefix or the suffix; For example, if user enters “\n” in the prefix text, the output of the barcode reader will appear on the next line of the page. And if the user enters “\n” in the suffix, the output of the barcode reader will show the barcode and change to the start of the next line for the user. Same with the command “\t” and “\b”. 44 E500RM8 User Guide How to change the scan type for the Barcode Reader 1. Go to the “WDC” application. 2. Go to Barcode Settings , tap Trigger Settings. 3. Select the Scan Type or select read time of the Barcode Reader. To start scanning the barcode user has to leave the WDC application. Auto Scan – Barcode Reader starts autoscanning once the user leaves the WDC application. Multiple Scan –After pressing the trigger button Barcode Reader starts continuously scanning and readingmultiple codes within the time duration specified in Read time option. Continuing Scan (default) – After pressing the trigger button Barcode Reader can scan and read only a single code within the time duration specified in Read time option. How to change the setting of the application WDC or reset the setting back to default 1. Go to the WDC application. 2. Tap Settings. 3. Users can select the options to change the setting of the application. 45 Chapter 6Data Capture 4. Users can reset to the default setting by tapping Reset setting. Scanning the barcode How to scan the barcode? 1. Press the function button to trigger the barcode. 2. Aim the barcode. 3. Ensure the entire barcode is within the rectangular area formed by the brackets in the laser framing. 4. Release the trigger. 46 E500RM8 User Guide Scanning Tips and Considerations Distance Scanning device will decode perfectly over a certain working range, there are minimum and maximum distance from the barcode. To specify the appropriate working range per barcode type is through a table as follows. Symbology Code 39 EAN / UPS 100% DataMatrix PDF417 Density 0.100 mm 0.125 mm 0.500 mm 1.000 mm 0.33 mm 0.18 mm 0.25 mm 0.38 mm 0.25 mm 0.38 mm Min Distance 9.5 cm 8.0 cm 6.5 cm 9.5 cm 6 cm 7.5 cm 6.0 cm 5.5 cm 5.5 cm 6.5 cm Max Distance 11.5 cm 14.5 cm 50 cm 75 cm 34 cm 16.5 cm 23.0 cm 34.5 cm 26 cm 37 cm Angle Scanning angle is important for promoting quick decodes. Scanning Angle Framing Angle 47 Horizontal 34.4° 34.4° Vertical 22.2° Horizontal 30° Vertical 20° Chapter 6Data Capture Using Smart Card Reader This chapter explains how to use Smart Card Reader. Notice that Smart Card Reader is an optional feature for E500RM8 PDA and may not be present in your device. Location Smart Card Reader is located on the bottom side of the E500RM8. How to Use Smart Card Reader 1. Enter Settingsmenu, and enter select “Accessibility”, and then uncheck “Connect to PC”. 2. Launch the SmartCardAP”, select List Reader, and then press open. If can’t find the reader information, please go back toStep1 then check and uncheck “Connect to PC” again. 48 E500RM8 User Guide 3. Insert the Smart Card (IC face to rear) then select “Set Power” and select power on. Press Get ATRto see theinformation written on the card. Smart Card Reader SDK You can download Smart Card Reader SDK from Winmate Download Center or Partner Portal. For more details on Winmate’s SDK refer to Appendix C. 49 Chapter 6Data Capture Using Fingerprint Scanner This chapter explains how to use Fingerprint Scanner. Notice Fingerprint Scanner is an optional feature for E500RM8 PDA and may not be present in your device. Location Fingerprint Scanner is located on the top rear side of the E500RM8. 50 Chapter 7Accessories Chapter 7 Accessories E500RM8 accessories provide a variety of product support capabilities. Some of the accessories are optional and are not included to standard packaging list. Standard Accessories E500RM8 Standard Accessory List: *Universal USB Adapter Input: AC 100-240V 50/60 Hz Micro USB Cable Output : 5V-2A Micro SD Card (4GB) 51 Hand Strap E500RM8 User Guide *Universal USB Adapter socket varies by country and region. E500RM8 will be shipped with the socket according to your order. Power Adapter Power Adapter allows charging the E500RM8 from the power source. To charge the E500RM8 connect power adapter to the E500RM8 from one side and plug in the socket to the power outlet. Power Considerations: Input: AC 100-240V 50/60 Hz CAUTION Output : 5V-2A Micro USB Cable Micro USB Cable provides power to the E500RM8 and USB communications with a host computer. To connect Micro USB cable to E500RM8, open the rubber cover on the right side and insert the cable to micro USB connector. 52 Chapter 7Accessories 53 E500RM8 User Guide Micro SD Card Micro USB Card slot is located on the rear side of E500RM8. To access it press two latches up and remove the battery. ForMicro SD Card installation instructions, refer to Chapter 1, “SD Card Installation” of this User Guide. 54 Chapter 7Accessories Hand Strap Hands strap to firmly grasp the device without having the fear of dropping it. To install hand strap: 1. Place the E500RM8 face-down on a flat surface. Attach the hand strap plate to the upper retaining bar. 2. Insert another side of the hand strap to the under bar. 3. Place your hand under the hand strap to adjust the fit. 4. Then fold the hand strap over and press down firmly to attach the hooks and loops, as shown at the illustration. 55 E500RM8 User Guide Optional Accessories E500RM8 Optional Accessory List: Two Slot Battery Charger Model name: BD-E430R Micro USB Host Cable (OTG Cable) Mobile Printer MX20 Mobile Printer MX30 56 Chapter 7Accessories Two Slot Battery Charger The battery charger allows charging up to two battery units simultaneously, ensuring you will never be stuck in-between charges. 2 x charging slots PoGo Pin type 2 x LED light Shows current power level 1 x DC in 12V / 50W DC in Buzzer 4-level volume control Refer to Chapter 2, “Charging the Battery” for detailed instructions on charging the battery using docking. Micro USB Host Cable (OTG Cable) The USB Host cable OTG (On-the-Go) function is to act as a host allowing a USB flash drive to be attached. 57 E500RM8 User Guide Mobile Printer Mobile printer allows to print labels and stickers directly from E500RM8. Model Name MX20 Print width: 1.89-inch (48mm) Drop & Fit label installation design IP54 water / dust resistant and 1.5M shock resistant Supports both wire (RS232 and USB ports) Long standby time up to 72 hours or 300 label; cycles between charges MX30 Print width: 2.8-inch (72mm) Supports multiple label width & types Drop & Fit label installation design Water and dust resistant meeting IP54 standard Versatile interfaces with both wire (RS232 and USB) & wireless (Bluetooth) connectivity. You need to use Bluetooth to pair the Mobile Printer with E500RM8. 58 Chapter 7Accessories 59 Appendix AProduct Specifications Appendix A: Product Specifications Model Name E500RM8 Display Specification System Specification Wireless Communications Size Resolution Brightness Touch 5" 1280 x 720 500 (typ.) Projective Capacitive Multi-touch Processor ARM® Cortex™-A53 Octa-core 1.3GHz System Memory Storage Operating System WLAN Bluetooth GPS Audio 2GB RAM 16GB eMMC Android 5.1 Lollipop 802.11 b/g/n Bluetooth 4.0 GPS / AGPS / GLONASS 2 x Built-in Mic 1 x Micro SD card slot 1 x Micro USB 1 x Power Jack 1 x Docking Connector 1 x Volume - + 1 x Power button 2 x Function button 4 x Front Key 1 x LED indicator Light Sensor, Proximity Sensor, G-sensor, Digital Compass Rear: 8 Mega-Pixel Camera with LED auxiliary light (Auto Focus) Front: 2 Mega-Pixel Camera (Either one with Barcode Reader) External I/O System I/O Buttons Indicators Sensors Security Buttons LED Indicators Sensors Camera Data Capture 1D/2D Barcode Reader (Optional) Data Capture Smart card reader, ISO 7816 part 1,2,3 (Optional) Fingerprint Reader (Optional) 60 Appendix AProduct Specifications Operating Temp. Mechanical and Environment IP Proof Shock Vibration Drop Dimensions (W x L x H) Weight Power Management -20°C ~ +60°C (AC Mode) -10°C ~ +50°C (Battery Mode) IP65 MIL-STD-810G Method 516.6 Procedure I MIL-STD-810G Method 514.6 Procedure I MIL-STD-810G Method 516.6, 4 ft, Free to concrete 85.4x163.22x22.5 (mm) 315g Battery 3.7V 3900mAh Li-ion battery Battery Operating Time 20Hr * based on the full-loading Adapter 5V 2A Adapter * Note: measured at dimming LCD brightness. Varies depending on the usageconditions, or when an external device is attached. **Note: all specifications are subject to change without prior notice. 61 Appendix CSoftware Development Kit Appendix C: Software Development Kit Winmate® provides the following drivers for E500RM8. Item File Type Description E500RM8 Drivers Android Debug Bridge(ADB) Driver / USB Driver E500RM8 Flash Tool Flash Tool Winmate® provides Software Development Kit (SDK) for E500RM8. Item File Type Description General SDK (WDC) Development kit for WDC, including Barcode Reader and Fingerprint Scanner Smart Card Reader SDK E500RM8 Smart Card Reader SDK - Android Development Kit Download SDK from Winmate Download Center or Winmate File Share. 1. Winmate Download Center: http://www.winmate.com>Support > Download Center >Industrial PDA>E500RM8 > Development Kit / Drivers Or follow the link: http://www.winmate.com/DownCenter/DownLoadCenter.asp?DownType=2021&OnlyContent= 2. Winmate File Share http://www.winmate.com>Support>Partner Portal>Public Documents>Industrial PDA> E500RM8 > Development Kit / Drivers Or follow the link: https://winmate.box.com/v/E500RM8 62 Appendix DOS Image Update Appendix D OS Image Update Winmate provide OS Image update tool. Refer to “OS Image Update Tool Guide” for a detailed instruction on how to update OS image. Download OS Image update tool and OS Image Update Tool Guide from Winmate Download Center or Winmate File Share. 1. Winmate Download Center: http://www.winmate.com>Support > Download Center >Industrial PDA>E500RM8 >OS Image Or follow the link: http://www.winmate.com/DownCenter/DownLoadCenter.asp?DownType=2021 2. Winmate File Share http://www.winmate.com>Support>Partner Portal>Public Documents>Industrial PDA> E500RM8 > OS Image Or follow the link: https://winmate.box.com/v/E500RM8 63 Winmate Inc. 9F, No.111-6,Shing-De Rd., San-Chung District, Taipei 241, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: www.winmate.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 81 Create Date : 2017:03:16 11:52:27+00:00 Modify Date : 2017:03:16 11:52:27+00:00 Subject : User Manual Title : Winmate E500RM8 Industrial PDA Author : Revision A Creator : WPS Office 个人版EXIF Metadata provided by EXIF.tools