Winplus LM55931 Bluetooth Module User Manual ML 55931 V1 Winplus Smart Home LED manual R5
Winplus Co., Ltd. Bluetooth Module ML 55931 V1 Winplus Smart Home LED manual R5
Winplus >
Host User Manual
12V DC 12V DC 12V DC 12V DC App-Controlled Smart LED Light Strip PACKAGE CONTAINS 4 x 36” Multi-Color LED Strips Model: LM55931 CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY TECHNICAL SPECIFICATION 12V DCInput voltage: 120VAc, 60Hz Output voltage: 12VDc Bluetooth ® distance: 30ft (if no obstacles) Frequency band: 2.4GHZ Types of LED: 5050 SMD RGB Maximum LED: 20ft (total combined) Maximum amperage draw: 3A Winplus ® Smart Lighting Hub Controller 4 x 24” Extension Cables INSTALLATION LED Strips Extension Cables Smart Lighting Hub Controller 12V DC 12V DC V DC 12 V DC 12 12 12 V DC V DC Total combined 20ft 120V Home Adapter & Converter Cable • Plug the adapter with converter cable into any standard 120V wall socket for power supply. Lights will ONLY work when power arrows are aligned as shown above Note: The portion of strip that is cut-off is no longer usable. • Connect the App-Controlled Smart LED Light Strip or extension and create your personalized lighting experience EXTENDABLE The Winplus App-Controlled Smart LED Light Strip can be extended up to a maximum length of 20ft (6m) using compatible extension strips. To function properly, extension strips must be connected to the same type of strip. (see example on the right) APP INSTALLATION FPO FPO Scan to download APP Scan to download APP Compatible with iPhone 4s & Compatible with phones higher, iPad3, iPad Mini, iPad Air with Android™ 4.3 or higher. & higher, and iPod touch 5th Note: not all Android™ phones Generation & higher. are equipped with Bluetooth® Requires iOS 7.0 or higher. Smart v4.0 required for this application. • To install Smart Lighting APP on your Smartphone, scan above QR code to find the compatible APP for iOS or Android. • Or you can search for the APP through the APP Store or Google Play WINPLUS LED • Once installed, open the APP and begin enjoying your Winplus® experience. 12V DC 12V DC Multi color + Multi color extension USING THE APP V1.1 DEMO Tap “Smart LED Hub” Icon to start Smart LED Hub APP will automatically pair to the Hub when both are powered on (including Bluetooth ®) and within 30ft (9m) A Master On/Off Switch LED Zone Functions: Connect and control up to 4 separate zones. On/Off: Press each zone icon to turn LED On or Off. USING THE APP CONT. Move Zone Icon: Press and hold zone icon, select “Move” to position each zone icon at your desired location. Rename Zone Icon: Press and hold zone icon, select “Rename” to rename each icon. (Note: Maximum 4 characters). Select Multiple: You can select multiple zones and control the same setting at once. WARNINGS 1. Do not install or use product if it, in any way, impairs the safe operation at home. You assume all responsibilities for the safe and prudent operation of the product and APP. 2. Follow manufacturer’s instructions to ensure the product is properly & safely installed. 3. Check your state or provincial laws before installing. 4. This product is intended solely for decorative purposes. Manufacturer and Seller assume no liability for installation or use, which are solely the responsibility of the purchaser. 5. Do not stare directly into the LED light strip when illuminated. Do not allow pets or children to stare directly into the LED light strip when illumniated. 6. The Manufacturer and Seller are not responsible or liable for consequential, incidental, or indirect damages, whether to person or property, resulting from the installation or improper use of this product. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. “Contains Transmitter Module FCC ID: WUI-LM55931” FCC statement: FCC Part 15.19 Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Press and hold zone icon, select “Select Multiple” then select your desired zone by pressing “Confirm”. To ungroup your selection, press and hold zone icon and select “Ungroup”. C Save Preset: You can save your favorite settings. After creating your setting, press "Save Preset" and enter your preset name. You can save up to 10 preset settings. Select Preset: You can select your previously saved preset setting, press "Select Preset" and choose your saved setting. Delete Saved Preset Setting: To delete a saved preset setting, press Press “Yes” to delete. Select Color: Choose from up to 49 different colors. Press "Select Color", select your desired color and press “Confirm”. Brightness: Slide bar to adjust brightness setting. LED Mode: Choose from 8 different modes Note: Music Mode is sound activated. Speed: Slide bar to adjust the speed of the movement from each LED Mode. "Select Preset" and press and hold the preset setting that you wish to delete. FCC Part 15.21 Warning Statement NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105 Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help RF statement: The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Winplus Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Have a comment or question? Email us at: info@winplususa.com or visit us online at: www.winplususa.com Winplus North America, Inc. 820 South Wanamaker Avenue, Ontario, CA 91761 USA Tel: 866-294-9244 © 2016 Winplus North America, Inc. All rights reserved. 3M™ is a trademark of 3M Company. iPhone, iPad and iPod touch are trademarks of Apple Inc. Android is a trademark of Google Inc. ML-55931_V1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:06:27 11:58:52+08:00 Creator : Adobe Illustrator CS6 (Macintosh) Modify Date : 2016:09:14 10:04:04+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : ML-55931_V1 Winplus Smart Home LED manual_R5 Metadata Date : 2016:09:14 10:04:04+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 140 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17151 bytes, use -b option to extract) Instance ID : uuid:5408d730-1baa-4b4d-82f1-a880a5ecb47d Document ID : xmp.did:0A80117407206811822A93F27C7BE8D1 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0980117407206811822A93F27C7BE8D1 Derived From Document ID : xmp.did:0980117407206811822A93F27C7BE8D1 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0380117407206811822A9B3DFDB8EABB, xmp.iid:0A80117407206811822A93F27C7BE8D1 History When : 2016:05:23 16:49:25+08:00, 2016:06:27 11:58:46+08:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/Singto/Desktop/Will/Ui/Smart LED for Home/image/color_wheel_730.png, /Users/WINPLUS/Desktop/Misc Folders/iStock Photo Share/iStock_000009468690_Large.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 23.999982 Max Page Size H : 21.000165 Max Page Size Unit : Centimeters Font Name : Helvetica-Light, Helvetica, HelveticaNeue-Light, HelveticaNeue, HelveticaNeue-Bold, Myriad-Roman, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold Font Family : Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Myriad, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Light, Regular, Light, Regular, Bold, Roman, Regular, Semibold, Bold Font Type : TrueType, TrueType, TrueType, TrueType, TrueType, Type 1, Open Type, Open Type, Open Type Font Version : 10.0d4e1, 10.0d4e1, 10.0d40e1, 10.0d40e1, 10.0d40e1, 001.001, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : Helvetica.dfont, Helvetica.dfont, HelveticaNeue.dfont, HelveticaNeue.dfont, HelveticaNeue.dfont, MyriaRom; Myriad, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 59.607800 Swatch Groups Colorants A : -1 Swatch Groups Colorants B : -1 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 2EXIF Metadata provided by EXIF.tools