Winplus LM56123 LED CEILING LIGHT User Manual

Winplus Co., Ltd. LED CEILING LIGHT

User Manual

CARE & USE INSTRUCTIONSIMPORTANT, RETAIN FORFUTURE REFERENCE: READ CAREFULLYFor assistance with assembly or installation, parts and customer service, call us at 1-866-294-9244 (English),Monday - Friday, 8am - 5pm Pacic Time, email us at info@winplususa.com820 South Wanamaker Ave., Ontario, CA 91761, USAwww.winplus.comITM. / ART. 1165831Model: LM56123LED CEILING LIGHT
2This LED Ceiling Light is suitable for use in any indoor location (e.g. home, oce, warehouse, workshop, garage, and etc.). This light has the following unique features:• Built-inSmartSensorControlSystem:ThisLEDCeilingLightusesamicrowavesensor  to automatically turn on when motion is detected and will turn o automatically after no movement is detected in the area after the preset (5 min or 30 min) time. • ConvenientWirelessRemote:Withtheremotecontrol,youcaneasilyadjustthelight  color, brightness, sensor distance, and the timer for auto-o.• AdjustableLightColor:Alongwiththeremotecontrol,youcaneasilyadjustthelight  color from warm white to cool white for the best t for your environment.• CRI90:ThehighCRI(colorrenderingindex)helpsshowtheobjectcolormorenaturally andclearlythanlightswithlowerCRIratings.Important Safety Instructions: Please read the following safety information before use. Toreduceriskofre,electricshock,orinjurytopersons:• TurnOFFthemainpoweratthefuseorcircuitbreakerbeforeinstallingthelightxture or making any electrical connection.• Makesurethislightxtureisadequatelygrounded.Toensurepropergrounding,there mustbeaseparategroundwire(barecopper)contactbetweenthislightxtureandthe ground connection of your main power supply panel. Do not connect the bare or green  insulationxturegroundwiretotheblack(hot)current-carryingwireorthewhite  (neutral)wire.Connectionofthebareorgreenxturegroundwiretotheblackorwhite  wiresmaycausemetalpartsofthexturetocarryelectricalcurrents,andmaycause  electricalshock,whichcouldcauseseriousinjuryordeath.• Donotsuspendanyxturebythehousewires.Suspendingaxturebythehousewires  andwireconnectorsmayresultinthexturefalling,possiblycausingpersonalinjuryand the danger of electrical shock or re. • Itisrecommendedthataqualiedelectricianperformallwiringconnections.All electrical connections must be in accordance with all national and local electrical codes.• Thislightxtureisdesignedforuseina110–120VAC,60Hzfusecircuit.Notforuseona dimming circuit.• Forindooruseonly.Warning:• LEDlightoutputisstrongenoughtoinjurehumaneyes.Precautionsmustbetakento prevent looking directly at the LEDs without installing the diuser (cover) for more than a few seconds.• Ifthelightinglightxtureisdamaged,itshallbeexclusivelyreplacedbythe  manufacturerortheserviceagentorqualiedpersoninordertoavoidahazard.• DonottamperwithorattempttorepairtheLEDcomponentorxture.Thelight source is designed for this specic application and should not be serviced by untrained personnel. Contact the customer service department if any servicing is required. • Thewarnings,precautions,andinstructionsdiscussedinthismanualcannotcoverall possible conditions and situations that may occur. The operator must understand that
3 common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.• DonotinstallthisLEDwithadimmer.Doingsomaydamagethedriverinsideifused with a dimming circuit. • Thisdevicedoesnothaveaplug;rewiringisrequired.Ifyouareunsurehowtorewire this light, please contact a qualied electrician to install instead of attempting to rewire yourself. • PowerwillstillruntothelightevenaftertheLEDlifespanrunsout.Alwaysshutthe power from the fuse (breaker) when conducting any type of maintenance on the light. Cleaning:• Cleantheoutsideofthexturewithasoft,dryclothorslightlydampenedcleancloth.Neveruseacleanerwithchemicals,solvents,orharshabrasivestocleantheproduct.• DonotspraycleanerdirectlyontoanypartofthextureorLEDsasthismaypermanently damage the light or its functions. Package Contains:ToolsNeeded(notincluded): 1xLEDCeilingLight 1xWirelessRemote2xAAABatteries  2xLongMountingScrews 2xShortMountingScrews  1xCrossbar  3xWireNutsPhillips-HeadScrewdriverPlease lay out all parts and read the instructions prior to installation.AAAAAAGND
4Installation Procedures:Before Installation:Carefullyremovethelightxture,mountingpackage,andwirelessremotefromtheboxand check that all parts are included. Do not attempt to assemble the product if any part is missing or damaged. Theoutletboxdescribedinthismanualisnotprovided.Astandardoutletboxneedstobe pre-installed in the ceiling, and the power supply wires need to be run to the outlet boxproviding120Vacofpower.Ifanoutletboxdoesnotexist,contactaqualiedelectrician for installation.Please turn OFF the main power at the fuse or circuit breaker before installing the light xtureormakinganyelectricalconnection.Youmayuseanon-contactvoltagetestertoensure no power running to the wires. Warning: Failure to disconnect the power supply prior to installation may result in seriousinjuryordeath.1.Rotatethecover(PartB)clockwisetodetach it from the lamp body (Part A).PartBPart A3. Make the following spliced wire connections using wire nuts:•White(neutral)supplywiretoWhitelightxturewire•Black(hot)supplywiretoBlacklightxturewire•Green(ground)supplywiretoGreenlightxturewiresScrew the wire nuts in a clockwise direction. Make sure no bare wire or wire strands are visible after making the connections. Consult with a qualied electrician if you have any electrical questions or if your current power supply does not include a ground wire. Warning:Neverconnectthegroundwiretotheblack or white power supply wires. 2.Installthelongmountingscrewsintooutletboxuntilthereisabout½in.betweenthe ceiling and underside of the screw head.
55.Placethelampbodyovertheoutletboxand feed the mounting screws through the inner keyhole slots.6.Rotatethelampbodyclockwisesothatthemounting screws slide into the narrow ends of the keyhole slots.7. Tighten the mounting screws to ensure the lamp body is secured against the ceiling. 9. When the installation is nished, you can turn on the main power and the light will turnon.Ifthelightdoesnotturnon,pleaserefer to the Troubleshooting section of this manual. 8. Attach the cover to the lamp body, and rotate the cover counter-clockwise to secure in place. To ensure complete securement, please rotate the cover until you cannot rotate further. 4. Carefully place all the wires and wire connectionsintotheoutletbox.
6Wireless Remote:Beforeuse,pleaseopentheswitchcoveronthebackoftheremote,andinserttwoAAAbatteries.When using the remote, you must point the remote directly to the light, to ensure the signals can be sent to the light. When the light receives the remote signal, the light will blinkoncesothatyouwillrecognizeit.1. Motion SensorYoucanpresstheMotionSensorbuttontoswitchON(greenindicator) or OFF (red indicator).ON:Thelightwillautomaticallyturnonwhenmotionisdetectedand will turn o automatically when there is no movement in area for preset time.OFF: The light will be function as an ordinary light to operate manuallythroughtheRemoteorwallswitch.Themotionsensorindicator(Green/Red)willashwheneveryoupressotherremotebuttons,toreectthestatusofmotionsensor.2. Light SensorYoucanpresstheLightSensorbuttontoswitchON(greenindicator) or OFF (red indicator).ON:Whentheambientsurroundingisbright,thelightwillstayOFF even if motion has been detected. When the surrounding is less bright and there is motion detected, the light will turn on. The light will turn o automatically when there is no further movement during the preset time.OFF: The light turns on and o accordingly to Motion Sensor setting, and is not aected by surrounding light.Thelightsensorindicator(Green/Red)willashwheneveryoupressotherremotebuttons,toreectthestatusoflightsensor.NOTE:IftheMotionSensoristurnedOFFtodisablethemotionsensorfeature,theLightSensorfeaturewillalsoautomaticallybeturnedOFF.Inthiscase,thelightmustbeturnedonwiththeRemoteorwallswitch. 3. BrightnessYoucanadjustthebrightnessfrom10%to100%fullbrightness,bypressingcontinuously the brightness buttons. Press the top brightness button to increase the brightness, and press the down button to decrease the brightness.4. Color TemperatureYoucanadjustthecolortemperaturefrom2700Kto5000K,bypressingcontinuouslythe color temperature buttons. Press the left color temperature button for a warmer color temperature, and press the right button for a cooler color temperature.Remote Setting:12345678
75. Power Button Youcanpressthepowerbuttontoturnlightonandoaccordingly.NOTE:WhenyoupresspowerbuttontoturnlightowhiletheMotionSensorfunctionissettoON,thelightwillturnONautomaticallyagainwhenthereismotiondetected.6. DistanceDistanceisthesensordetectionareaofthesmartsensor.Youcanchoosefromvarioussettings:Verynear,Near,Mid-rangeandFar.Thesensingdistancewouldberangedfromaround1m/3.2ftto8m/26.2ft.Youmayrefertothetablebelowforthemaximumsensingdistanceforthelightinstalledataheightof3m/9.8ft.BypressingtheNearbutton,youcanchangetoashorterdistance.BypressingtheFarbutton, you can change to a longer distance. Forexample:-Currentsetting:Near-Ifpress“Near”once,thesettingwillbechangedto“VeryNear”,andtheMotionSensor button will blink 1 time as indication. -Ifpress“Far”once,thesettingwillbechangedbackto“Near”,andtheMotionSensor button will blink 2 times as indication.Anymovementinsidethedetectionzonewillbedetectedbythemotionsensor.Actualsensingdistancemaybeinuencedbyenvironmentconditions.Forexample,thesensingdistancedecreasesinanopenareafreeofobjects.Thedistanceincreasesinanareawithlotsofmetallicobjects.7. Night ModeBypressingtheNightModebutton,thebrightnesswillchangeto20%offullbrightness. The color temperature will be kept the same.8. Motion Sensor Time Until OMotion Sensor Time Until O is the time for the light to turn OFF completely when there isnomotiondetected.Youcanchooseeither5minor30min.The light will be turned OFF when there is no motion detected within the preset time. Whenchoosing5min,thelightwillbedimmeddownto50%ofcurrentbrightnesswhen no motion has been detected for 4 minutes and the light will be turned OFF when no motion is detected 1 further minute.Whenchoosing30min,thelightwillbedimmeddownto50%ofcurrentbrightnesswhen no motion has been detected for 29 minutes and the light will be turned OFF when no motion is detected 1 further minute.Any movement detected within this period will restart the timer and the light will be turned on again.Setting Maximum Sensing Distance (D) Blink(s) on Motion Sensor ButtonVerynear 1m/3.2ft-2m/6.5ft 1 timeNear 2m/6.5ft-3.5m/11.4ft 2 timesMid-range 3.5m/11.4ft-5m/16.4ft 3 timesFar 5m/16.4ft-7m/22.9ft 4 times
8Product Specications:1. OperatingVoltage:120Vac,60Hz2. Maximumwattage:22W3. MaximumLightOutput:1700lm4. ColorTemperature:2700K–5000K5. LED Life Cycles: up to 50,000 hrs*6. CRI:90*Note:50,000-hourlifespanisfortheLEDonly.Lifespandependsonoperatingtemperature, environmental conditions, etc.Troubleshooting:Problem Possible Cause SolutionLight does not illuminate. Light does not turn on. LED light burned out. ReplacetheLEDCeilingLightPower is o. Make sure power supply is on. Ensure the circuit breaker is in the on position as well. Faulty wire connection Check wiring to ensure all wires are correctly wired and are wired securelyFaulty switch Testand/orreplaceswitchLight does not turn on during the day.Make sure the Light Sensor feature is not enabled (only allowing the light to turn on when the background light is darker). Turn Light Sensor o to disable this feature. Fuse blows or circuit breaker trips when light is illuminated.The wires are crossed (not wired properly) or the power wire is grounding out. Turn power to the light o from the breaker. Check the wires to ensure the wires were properly connected. Ifeverythinglookscorrect,contactaqualied electrician to check your wires. Light settings cannot be changed from the remote.Batteriesnotinsertedcorrectly.Open the battery compartment cover and conrm the batteries were insertedcorrectly.Replacewithnewbatteries if needed. Batteriesareout. ReplacewithtwonewAAAbatteries.Remotecontrolisoutofrange Move closer to the LED Ceiling Light to select changes from the remote.
9Warranty:Winplus North AmericaThis Winplus product carries a 1 year warranty against defects in workmanship and materials.Thisproductisnotguaranteedagainstwearorbreakageduetomisuseand/or abuse.NOTE:WarrantyonlyappliesforNorthAmericancustomersofpurchasesmadeinNorthAmerica. Conditions of Warranty Ifduringthe1yearwarrantyperiodyournewproductisfoundtobedefective,WinplusNorthAmericawillrepairsuchdefect,orreplacetheproduct,withoutchargeforpartsorlaborsubjecttothefollowingconditions:• AllrepairsmustbeperformedbyWinplusNorthAmerica.• Allwarrantyclaimsmustbeaccompaniedbyacopyofthesalesreceiptorbillofsale.• Theequipmentmustnothavebeenalteredordamagedthroughnegligence, accident, improper operation, or failure to follow the product instructions for installation, use, or care.• Thereplacementofpartsisexcludedfromthewarrantywhenreplacementis  necessary due to normal wear and tear. • RepairorreplacementpartssuppliedbyWinplusNorthAmericaunderthiswarranty areprotectedonlyfortheunexpiredportionoftheoriginalwarranty.• Thisisa“repairorreplace”warrantyonly,anddoesnotcoverthecostsincurredfor  the installation, removal or reinstallation of the product.OWNER’SRESPONSIBILITIES:WinplusNorthAmericawillmakeeveryeorttoprovidewarrantyservicewithinareasonableperiodoftime.SHOULDYOUHAVEANYQUESTIONSABOUTSERVICERECEIVEDORIFYOUWOULDLIKEASSISTANCEINOBTAININGSERVICE,PLEASECALLTOLLFREE1.866.294.9244DURINGREGULARBUSINESSHOURSMONDAYTHROUGHFRIDAY9:00AMTO5:00PMPST.
10ThisdevicecomplieswithPart15oftheFCCrulesandIndustryCanadalicense-exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemay not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning:Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorizedmodicationsorchangetothisequipment.Suchmodicationsorchangecouldvoidtheuser’sauthoritytooperatetheequipment.ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevision reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorientorrelocatethereceivingantenna.-Increasetheseparationbetweentheequipmentandreceiver.NOTE:TollFree#isforNorthAmericaCustomersONLY.SeeCustomerservicesectionforcustomercontactnumbersforotherregions/oces.For customer service and technical support, please call us at 1.866.294.9244 or email usatinfo@winplususa.com.Ifatthattimeitisdeterminedthatareplacementunitisneeded,thesupportrepresentativewillissueaReturnAuthorizationandinstructonhow to get a new unit. WinplusNorthAmericamakesnootherwarrantyofanykindasidefromthelimitedexpresswarrantystatedherein.DISCLAIMEROFWARRANTIES,INCLUDINGWARRANTYOFMERCHANTABILITYANDWARRANTYOFFITNESSFORPARTICULARPURPOSE:EXCEPTASSPECIFICALLYSETFORTHHEREIN,NOWARRANTYORREPRESENTATION,EXPRESSORIMPLIES,ISMADEASTOTHELEDSHOPLIGHT.EXCEPTASEXPRESSLYSETFORTHHEREIN,WINPLUSNORTHAMERICAAND/ORITSAFFILIATESEXPRESSLYDISCLAIMS,WITHOUTLIMITATION,ANYSTATUTORYWARRANTIESANDALLIMPLIEDWARRANTIES,INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE.FCC / IC Compliance Statement:
11- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consultthedealeroranexperiencedradio/TVtechnicianforhelp.ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.TomaintaincompliancewithFCC’sRFexposureguidelines,thisequipmentshouldbeinstalled and operated with a minimum distance of 20cm between the radiator and your body.DISTRIBUTEDBY:COSTCOWHOLESALECORPORATIONP.O.BOX34535SEATTLE, WA 981241535, USATEL: 18007742678www.costco.comMADEINCHINAHaveacommentorquestion?Emailusatinfo@winplususa.com or visit us online at www.winplus.com 820 South Wanamaker Ave., Ontario, CA 91761, USA | Tel: 1-866-294-9244©2017WinplusNorthAmericaInc.Allrightsreserved.ML-56123_V1Revisiondate:May2017

Navigation menu