Wintecronics CA04 2.4GHz ANT+ Wireless Bike Computer User Manual WBC 301 EN ai
Wintecronics Ltd 2.4GHz ANT+ Wireless Bike Computer WBC 301 EN ai
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1609261 |
| Application ID | kdg86jNekXqQySlnEk9D3Q== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.39kB (729868 bits) |
| Date Submitted | 2011-12-25 00:00:00 |
| Date Available | 2011-12-25 00:00:00 |
| Creation Date | 2011-11-18 18:41:06 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2011-11-18 18:41:17 |
| Document Title | WBC-301(EN).ai |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | chu |
PK CA02-2 VER.2 Bike Info Middle Line information WBC 301 Lower Line information CLOCK Display the time in 12-hours or 24-hours clock. MOVE TIME Measure the time on riding from the reset on measured value since last time. (00:00~99:99) 2.4GHz ANT+ Wireless Bike Computer Instruction Manual AVG . SPEED Measure average speed calculated from the total distance divided with time on riding. (0~9999.9) ALTITUDE The indication on the present altitude. (The present altitude is calculated based on the barometer. Even at the same position, the altitude may have a little discrepancy due to the different conditions on the weather. Even when in a stable weather condition, the same position of altitude may differ in 20 meters from daytime to nighttime.) (-999~19999) Design Patented Measure the fastest speed from the reset on measured value since last time. (0~9999.9) GRADE% Overview Indication on the present value of grade. Grade is calculated by the variation on the distance and height because the calculation based on the barometer will result in discrepancy and be slightly inaccurate. Function keys ‧ Press the button to switch and look through the cycling information on information page. ‧ In the setting mode, press the button to change numbers or measurement units. ‧ When entering the altitude adjustment, press the button to switch among three types of adjustment or the numbers. When resetting the odometer, the data won’t return to zero, you need to change the value of it in the setting mode.(0~9999.99) ‧ In the information status, press and hold the setting button on the back for 3 seconds to enter the setting mode. ‧ In the setting mode, press the button shortly to scroll over the setting functions. ‧ In the setting mode, press and hold the setting button on 3 seconds again to return to the information page. 27 x 1-1/4 2161 14 x 1.5 1020 26 x 1(59) 1913 27 x 1-3/8 2169 14 x 1.75 1055 26 x 1(65) 1952 650 x 35A 2090 16 x 1.5 1185 26 x 1.25 1953 650 x 38A 2125 16 x 1.75 1195 26 x 1-1/8 1970 650 x 38B 2105 18 x 1.5 1340 26 x 1-3/8 2068 700 x 18C 2070 18 x 1.75 1350 26 x 1-1/2 2100 2080 20 x 1.75 1515 26 x 1.40 2005 700 x 20C 2086 20 x 1-3/8 1615 26 x 1.50 2010 700 x 23C 2096 22 x 1-3/8 1770 26 x 1.75 2023 700 x 25C 2105 22 x 1-1/2 1785 26 x 1.95 2050 700 x 28C 2136 24 x 1 1753 26 x 2.00 2055 700 x 30C 2170 24 x 3/4 Tubular 1785 26 x 2.10 2068 700 x 32C 2155 24 x 1-1/8 1795 26 x 2.125 2070 24 x 1-1/4 1905 26 x 2.35 2083 700 x 35C 2168 24 x 1.75 1890 26 x 3.00 2170 700 x 38C 2180 24 x 2.00 1925 27 x 1 2145 700 x 40C 2200 24 x 2.125 1965 27 x 1-1/8 2155 700 x 19C 700C Tubular 1. Spin the wheel and choose one piece of the spoke or let the valve stem vertically straight to the ground to be A point marked on the surface of ground. 2. Then spin the wheel in one circle and when the same piece of spoke or the valve stem reach to the ground again, mark the position of it as B point on the ground. 3. Measure the distance between point A and B (mm) to acquire the wheel size for setting. 2130 A or B bike Function keys: Select the bike A or B. Setting Button: Store the setting value and go to the next selection for tire size setting. A or B bike Setting on Tire Size the unit will scroll and change to next information page automatically per 5 minutes. Measure the amount of calories consumption from the reset on measured value since last time.(0~19999) The “up” arrow on the screen display the present speed showing on the upper line is higher than the average speed. On the other hand, the “down” arrow on the screen display the present speed is lower than the average speed. Operating the Unit Data Reset Press function key for 3 secs can clear the present data back to Zero execpt the altitude adjustment. For the altitude adjustment, please refer to the operation of Altitude adjustment Mode. Power Saving Mode If the main unit does not receive a signal or when keypads or sensor do not triggered after about 10 minutes, the main unit enters power saving mode and only displays the time info. Auto Start / Stop Under the power saving mode, press Setting on Tire Size Odometer setting Speed Sensor Pairing Odometer Setting Function keys: Change the numbers of odometer. Backlight/Switch keys: Shift the selected parts on numbers. Setting Button: Store the setting value and go to the next selection for odometer setting. Speed Sensor Pairing Function keys: perform the pairing on speed sensor and return to the information page. Setting Button: go to the clock setting page. Installing the Unit Rubber holder Bracket Speed sensor Magnet Strap straps in normal size Install the Bike Computer A. B. ★ Please make sure the unit has been well-clicked into the bracket. Installing on Magnet of Speed Sensor 1. Please remove any dirty or oily things on the spoke to make sure no slipperiness before installing magnet. 2. Release the safety hook on the magnet. 3. Be sure to clip it on the spoke tightly into the most inner side of gap on the central of two-sided magnet． 4. Lock the safety hook back on magnet in order to avoid it being thrown off in cycling. function key can wake up the information page. If the unit needs to start pairing with sensor again, please enter the setting mode and performing the pairing under the page of S.Scan. Before scanning, you need to select A or B bike in advance; the system will store and input the sensor ID of A or B Bike automatically next time. (Please swing the magnet over the detection zone on the sensor to activate the sensor before performing the pairng with computer.) Replacement of Battery 5mm Detection zone Adjust the position of detection zone on the sensor and keep the distance with magnet within 5mm. Please clip the magnet for speed sensor on the spoke, place the spoke into the bottom side of crack. Installing on the Speed Sensor CR1632 When there is a low-power icon appearing on the screen, please replace it with a new battery as soon as possible. CR2032 The battery type for the sensor is CR1632. You can advice the bike store for purchase of CR1632 battery for the replacement. Maintenance For cleanness of the unit or accessories, moisten a soft clothe in and diluted neutral detergent and wipe it clean and dry with another towel. Specification Microcomputer Battery Battery life Display Tire Sizes Working Temperature Dimension Weight 16-bit 1-chip (Crystal controlled oscillator) Bike Computer: 3Volt Lithium Battery CR2032 x 1 Speed Sensor: 3Volt Lithium Battery CR1632 X1 Bike computer: Approx. 10 months, calculated based on 1-hour consumption per day and depending on the extent on the usage. Speed Sensor: Approx.12 months, calculated based on 1-hour consumption per day and depending on the extent on the usage. *Please be aware that the frequent use on the backlight in operation will lead to faster power consumption. Liquid crystal display Tire peripheral lengths from 0 to 9999 cm (Initial value: 2096 mm) 0 °C – 40 °C (Please be aware that if the temperature is over high or low, it may result in a system delay or LCD turns dark.) Bike Computer: 54 x 35 x 12mm / Speed Sensor: 46 x 26 x 15mm Bike Computer: 21g / Speed Sensor: 9g ★ The life of the factory-loaded battery might be shorter than the description in usage. ★ The specifications and design are subject to change without notice. Trouble Shooting No Display: (1) Check the battery capacities and it will be in low efficiency when in the cold season. (2) If the battery installed upside down? (3) Make sure the battery case locked on the unit. No Speed info: (1) Check if there are some dust inside the contacts on bracket or on the unit. (2) Make sure the distances between sensors and magnet is within 5mm. Not Correct Value on Speed and Distance: (1) Make sure the correct value setting on tire peripheral. (2) Make sure the distances between sensors and magnet is within 5mm. (3) Unload the battery and install again. The screen becomes dark: Check if there is high temperature in environment. The screen becomes dim: Check if the power of battery is low. System Delay: (1) Check if there is over low temperature in environment. (2) Check if the power of battery is low. The inaccuracy on the altitude: The present altitude is calculated based on the barometer, even at the same position, the altitude may have a little discrepancy due to the different conditions on the weather. Even when in a stable weather condition, the same position of altitude may differ in 20 meters from daytime to nighttime The longer you are using the computer may lead to larger discrepancy. We suggest to manually input the present altitude when inaccuracy. Notice ! Install the bike computer on the A. handle bar or B. stem LCD contrast can be adjusted when the battery is installed on the unit. In the meantime, all the icons will show up on the display by 3secs, in the meantine, press function key. or Backlight/Switch key any of it to make adjustment . If the setting is done, press setting Button to exist. Rubber holder for speed sensor How to Install the Bracket LCD Contrast Adjustment Pairing the Speed Sensor with Unit Magnet Function keys: Change the numbers of length. Backlight/Switch keys: Shift the selected parts on numbers. Setting Button: Store the setting value and go to the next selection for Odometer setting. Auto Scroll CALORIES Note: To measure accurate tire size, please refer to the following ways per instructions. Function keys: Select the indication on KMH or MPH unit. Setting Button: Store the setting value and go to the next selection for tire size setting. To indicate the present degree on temperature. (0~199) L (mm) 1920 KMH/ MPH setting KMH / MPH Setting Temperature Wheel Size (Reference Chart) L (mm) Tire Size Function keys: Select time in 12-hours or 24-hours clock or set the time in lower line. Backlight/Switch keys: To shift the selected parts between 12-hours or 24-hours clock or time setting. Setting Button: Store the setting value and go to the next selection for clock or time setting. ODOMETER Setting Button 26 x 7/8 Clock Setting Measure the distance on riding from the reset on measured value since last time.(0~9999.99) ‧ On the information page, press the button can enable the backlight, and the backlight stays on 5 seconds before turning off. ‧ In the setting mode, press the button to shift the selected parts on numbers or units. ‧ When entering the altitude adjustment, press the button to shift the selected parts on the screen. 935 Press and hold the setting button on the back for 3 seconds to enter the clock setting mode. Return to the information page, press and hold the button for 3 seconds again. DISTANCE Backlight / Switch keys L (mm) Tire Size Enter / Return to the information page, press and hold the button for 3 seconds. Max. Altitude Measure the highest altitude from the latest reset on measured value. (0~19999) ★ The sensor uses 2.4GHz transmission. It can be well-connected with bike computer no matter installed on front fork or chain stay. thin straps Setting Mode MAX SPEED Measure the grand total of ascent altitude from the latest reset on measured value. (0~19999) 12 x 1.75 Under the information browsing page, if any of the it contains the altitude related info(like MAX.ALT, TOT ALT, GRADE), in the meantime, press function key 1 for about 3 secs to enter the altitude adjustment mode. There are three selections for altitude adjustment. 1. ADJUST: Adjust and input the altitude manually according to any operating environment like riding along seacoast or up to the mountain and the height can be acquired on the positions. 2. Home: Adjust and input the altitude manually according to the default altitude on your home. 3. Default: Calculation on altitude according to the factory default. Clock setting Total Altitude Tire Size Altitude Adjustment 1. Assemble the rubber desk with sensor. 2. Please parallel detection zone on the sensor to the central surface on magnet. 3. Measure the appropriate length of rubber desk when tie it up on the frame of bike with the straps and cut the additional parts off. Please read through instructions carefully before attempting to install WBC-301. Keep the manual at a place easily accessiable, and do not throw away. ‧ Do not concentrate on the computer operations while bicycling. Always be sure to bicycling safety. ‧ Please check the distance between magnet and sensor within 5mm periodically. ‧ Never disassemble the main unit. ‧ Do not leave the main unit directly exposed to sunlight. ‧ Periodical check the positions on the magnet, sensors and bracket. ‧ WBC-302 only supports in ANT+ speed sensors. It doest not support ANT+cadence sensors or two-in-one sensors, heart rate sensors or other ANT+ accessories. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio / TV technician for help You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 1 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:84f4c2d5-8042-4015-b2ed-a963d9ca8119 Modify Date : 2011:11:18 18:41:17+08:00 Create Date : 2011:11:18 18:41:06+08:00 Metadata Date : 2011:11:18 18:41:17+08:00 Document ID : uuid:02248562-71f1-4bad-a052-924d6773fd1b Format : application/pdf Title : WBC-301(EN).ai Creator : PScript5.dll Version 5.2 Author : chu Producer : Acrobat Distiller 8.0.0 (Windows)EXIF Metadata provided by EXIF.tools