Wintecronics TR68A1-1 Remote Control Transmitter User Manual L TR68A 1
Wintecronics Ltd Remote Control Transmitter L TR68A 1
User Manual
The Wintercronics Co., Ltd. Model: L TR68A1-1 (referred to as the EUT in this report) is a
Transceiver of car alarm security system. It offers wireless remote control, ideal for use in
vehicle security system to activate the function of center door lock control system and car
searching except the alarm system.
A major technical descriptions of EUT is described as following:
A). Operation Frequency: 433.92 MHz
B). Modulation : Pulse Modulation
C). Antenna Designation: Non-User Replaceable (Fixed)
D). Power Supply: 5V, Battery Operated.
E). Receiver type : Superheterodyne
Fundamental Frequency 433.92MHz
Power Source 5V Battery Operated
Transmitting Time Periodic ≤ 5 seconds
Associated Receiver FCC DOC
L-TR68A-1UHF TWO WAY TRANSMITTER MODULE
Frequency
Modulation
Receiver Sensitivity
Radiated Power
Temperature range
Power Source
Power Consumption
Data Rate
RF Freq. Tolerance
433.92MHZ
RX
：
AM TX
：
AM
-115dbm
最小
@ 50
0dbm
最小
@50
-30
℃ ∼
+80
℃
5VDC
±
0.5V
RX
：
11 mA TX
：
20 mA (average)
2Kbps
+/-100K
Product Specification
Product Dimension Application
u
Wireless Meter Reading
u
Wireless Data Transceiver
u
Keyless Entry Systems
u
Wireless Security Systems
u
Battery Powered Portable Devices
MODEL:L-TR68A-1
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
condition.(1).this device may not cause harmful interference. (2).this device must accept any
interference received, including interference that may cause undesired operation
Warning:
Note: This equipment has been tested and found to comply with the limits for digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, used and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference in to radiate communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
l Reorient or relocate the receiving antenna
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different form that to which the receiver in
connected.
l Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference: and
(2) This device must accept any interference received: including interference that may cause
undesired operation.
THE MANUFACTURER IS NOT RESPONSIBKE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH ODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. Such modification could void the user’s authority to operate the
equipment.