Wintop Electronics BT-535 Bluetooth sport headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3492065
Application ID	FPLep7OgoTy7X9jF7B8yDg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	414.4kB (5180002 bits)
Date Submitted	2017-08-02 00:00:00
Date Available	2017-08-02 00:00:00
Creation Date	2017-07-12 08:33:32
Producing Software	doPDF Ver 7.3 Build 394 (Windows 7 Ultimate Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

Wintop Electronics Co., Ltd
SPECIFICATION
Model No.：
Description：
Chipset：
Date:
Product Image
BT-535
In-ear Bluetooth Earphone
WT200 V4.0
2017.5.20
Wintop Electronics Co., Ltd
Product Size
Product Materials
Silicone ear cushion
PC+ABS earbuds
Silicone “+” button
PC+ABS controller
Silicone MFB button
Charging port
TPE cable
Silicone “-” button
Wintop Electronics Co., Ltd
Product Function
Parameter
Li-battery Spec.
Capacity
Working Voltage
Working current（playing music）
Working current（on talking）
Standby current
Charging current
Charging time
Turn-off current
2.Frequency Spec.
Frequency response
Max output power
SNR：1K@0dB With IEC
Distortion rate: 1K@0dB
Bluetooth receiver sensitivity
Working distance
3.MIC Spec.
Working voltage
Testing voltage
Sensitivity
Sensitivity（At 1khz/0.178v）
Frequency range
Distortion rate:5% in shole range at
1kHz
Impedance at 1kHz
Out put power
min
3.3
1.2
type
max
380926
Unit
60
3.7
20
24
60
1.5
mAh
Volt
mA
mA
mA
mA
uA
20
-39
87
20
4.2
20k
-88
0.8
-88
10
Hz
mW
dB
dBm
M/360 度
1.8
4.5
-42
-45
dB
93
20K
dB
Hz
90
≤5%
16±15%
ohm
mw
remarks
Wintop Electronics Co., Ltd
BT-535 Function/Manual
Model No.: BT-535
Keys
Function
Method
Descrip.
Long press MFB about 2.5 sec to turn on device when it’s in off
Then wait 12 secs it will go into pairing mode automatically
Or long press MFB button for around 8 secs, device will go into
paring mode
Long press MFB about 2.5 sec to turn off device when it’s in
On/pairing
off/connect
standby mode
LED flash tips
Blue LED flash 3 times
(Blue&red LED will flash
Voice
prompt
Power on
(paring)
alternately)
Red LED flash 3 times
Power off
Make sure device and phone are within 1 meter for repairing it
first time
Turn on phone’s bluetooth function to select device and choose
MFB
pairing name.
key
Click repairing password“0000” if need
Repeat above steps if failed repairing;
Short press MFB once to answer the call
Short press MFB once to end the call when the call is on
Call
function
Long press MFB for 1 sec to reject a call
continuouslyshort press MFB twice to remake the last call you’ve
called during standby mode or music is on
Play/pause
Play music by short press MFB once when the music is paused
music
Pause music by short press MFB once when the music is playing
Voice
short press “+” to make louder music
up/down
short press “-” to make lower music
Previous/
long press “+” to next song
next song
long press “-” to previous song
+/-
Blue LED flashes
Sort
connected
Wintop Electronics Co., Ltd
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Page Layout                     : OneColumn
Page Mode                       : UseNone
Producer                        : doPDF Ver 7.3 Build 394 (Windows 7 Ultimate Edition (SP 1) - Version: 6.1.7601 (x64))
Create Date                     : 2017:07:12 08:33:32+08:00

EXIF Metadata provided by EXIF.tools