Wintop Electronics BT-575 Bluetooth Earphone User Manual

Wintop Electronics Co., Limited Bluetooth Earphone

User Manual

Wireless Stereo HeadphonesModel: BT-575Package Contents1 x BT-575 Wireless Stereo Headphones1 x USB Charging Cable1 x Travel Pouch1 x User GuideProduct Diagram1. Micro USB Charging Port2. LED Indicator / Microphone3. Volume + / Next Track (long press)4. Multifunction Button5. Volume - / Previous Track (long press)How to Use12345
1. Charging1) Connect the charging port with any USB charging adapter or active computer USBport.2) Charging will start automatically with LED indicator turning red.3) The headphones are fully charged when LED indicator turns blue.Note: Charge the headphones at least once every 6 months when not using for a longtime.2. Pairing1) Make sure the headphones and your Bluetooth® device are next to each other(within 3 feet / 1 meter).2) The first time you use the headphones, press and hold the Multifunction Buttonuntil the LED indicator flashes red and blue alternately. Now the headphones arein pairing mode.3) Activate Bluetooth® function on your phone and search for the nearbyBluetooth® connection: Find “TaoTronics TT-BH034” in the search results. Tapon the name to connect. Once connected, the LED indicator will flash blue.Note：The Bluetooth® headphones can remember previous paired devices.If the headphones cannot pair with your Bluetooth® device, clear the pairinghistory by pressing and holding the Multifunction Button when it’s being chargeduntil the LED Indicator flashes red once, then turns solid. Restart the headphonesto pair again.How to Wear
FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposure conditionwithout restriction.

Navigation menu