Wintop Electronics BT-575 Bluetooth Earphone User Manual
Wintop Electronics Co., Limited Bluetooth Earphone
User Manual
Wireless Stereo Headphones
Model: BT-575
Package Contents
1 x BT-575 Wireless Stereo Headphones
1 x USB Charging Cable
1 x Travel Pouch
1 x User Guide
Product Diagram
1. Micro USB Charging Port
2. LED Indicator / Microphone
3. Volume + / Next Track (long press)
4. Multifunction Button
5. Volume - / Previous Track (long press)
How to Use
1
2
3
4
5
1. Charging
1) Connect the charging port with any USB charging adapter or active computer USB
port.
2) Charging will start automatically with LED indicator turning red.
3) The headphones are fully charged when LED indicator turns blue.
Note: Charge the headphones at least once every 6 months when not using for a long
time.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each other
(within 3 feet / 1 meter).
2) The first time you use the headphones, press and hold the Multifunction Button
until the LED indicator flashes red and blue alternately. Now the headphones are
in pairing mode.
3) Activate Bluetooth® function on your phone and search for the nearby
Bluetooth® connection: Find “TaoTronics TT-BH034” in the search results. Tap
on the name to connect. Once connected, the LED indicator will flash blue.
Note：
The Bluetooth® headphones can remember previous paired devices.
If the headphones cannot pair with your Bluetooth® device, clear the pairing
history by pressing and holding the Multifunction Button when it’s being charged
until the LED Indicator flashes red once, then turns solid. Restart the headphones
to pair again.
How to Wear
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.