Wireless Computing R170 Wireless Mouse User Manual RF 170 instructions copy Jan 08 qxp

Wireless Computing Inc Wireless Mouse RF 170 instructions copy Jan 08 qxp

RF 170 Instructions

SETUP1. Remove the mouse’s battery door.2. Insert two AA alkaline batteries (included) into thebattery compartment. The batteries face in oppo-site directions. The direction of each battery ismarked.3. Replace the battery door.4. Plug the receiver into a USB port on your comput-er. Do not place receiver on or in a metal cabinet,or near other equipment and strong EMI sources.SELECT ADDRESSWhen delivered, your RF-170 operates on addresszero. You may leave it on address zero. However,while on address zero, your computer may receiveand respond to signals from other WirelessComputing products.1. Press and release the black button on the under-side of the receiver. The LED on top of the receiverbegins blinking.2. If you purchased your RF-170 together with aWireless Computing keyboard, first select anaddress on the keyboard. Refer to the keyboardinstructions for what keys or buttons to press. Ifyou do not have a Wireless Computing keyboard,continue to the next step.3. While the LED on the receiver blinks, press theblack SELECT button on the underside of themouse. This sets the mouse and receiver to one of65,000 random addresses. The receiver LED blinksfor 30 seconds. This 30-second blinking cyclestarts again each time a product is selected.OPERATIONThe RF-170 Wireless Laser Mouse is designed tooperate reliably at distances of 100 feet (30 meters).Operating range will vary depending on positioning ofthe receiver, mouse, nearby sources of interferenceand other factors. Pressing a button, rolling the scrollball up/down, ormoving the mouse makes the LED flash green onthe top of the mouse, and the LED on the receiverblink green.When the mouse’s batteries are low, the LED blinksin a characteristic on/off pattern. If you see yourmouse’s LED blinking when it is not being moved, liftthe mouse from the tabletop. If the LED continuesblinking, replace the batteries.Operating instructionsRF-170 Laser Mouse Wireless Computing, Inc., Austin, TX512.263.2205 wirelesscomputing.com
TROUBLESHOOTINGThe receiver LED is not lit• Ensure that the computer is powered on and thereceiver is connected to computer.Mouse cursor does not move• If the LED on the mouse flashes all red, select theaddress.• If the LED flashes mixed red and green, repositionthe receiver away from other equipment and ashigh as possible. Also, ensure the distancebetween the mouse and receiver is no more than100 feet.• If the LED does not flash at all, replace the mouse’sbatteries.• Unplug the receiver and plug it back into the com-puter.The RF-170 works, but other Wireless Computingkeyboards and mice don’t• The other devices aren’t set to the receiver’saddress. Select the address on all devices.Cursor moves by itself or keystrokes appear fromnowhere• Your receiver is within range another WirelessComputing product set to the same address. Re-select the address.FOR FURTHER ASSISTANCEVisit www.wireless-computing.com/support or callcustomer support at 512.263.2205 between 9:00 -5:00 Central Time.FCC INFORMATIONThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause unde-sired operation.FCC ID: L7MR170 RF-170 Wireless Laser MouseL7MR019 RF-019 Dual Antenna ReceiverADDITIONAL INFORMATIONFor use with UL Listed, CSA approved personal com-puters. Not intended for use in machinery, medical orindustrial applications. Do not use in aircraft or haz-ardous locations.© Copyright 2008 Wireless Computing, Inc. All Rights Reserved. Wireless Computing is a trademark of Wireless Computing, Inc., Austin TX USA. 01-2008Caution: Any changes or modifications notexpressly approved by Wireless Computing couldvoid your authority to operate this device. No partsare user serviceable.

Navigation menu