Wireless N2X5-3S1-16B User Manual Additional corrections to 17 Dec draft

Wireless Inc Additional corrections to 17 Dec draft

Additional corrections to 17 Dec draft

Download: Wireless N2X5-3S1-16B User Manual Additional corrections to 17 Dec draft
Mirror Download [FCC.gov]Wireless N2X5-3S1-16B User Manual Additional corrections to 17 Dec draft
Document ID80659
Application IDe1AxpFQ2OSuFzA1aIOM5ZA==
Document DescriptionAdditional corrections to 17 Dec draft
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize1.8kB (22529 bits)
Date Submitted2000-01-12 00:00:00
Date Available2000-01-24 00:00:00
Creation Date2001-04-30 17:48:30
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-04-30 17:48:31
Document TitleAdditional corrections to 17 Dec draft

Corrections to N2-X Ethernet Extender Installation and Operation Manual
(12-17-99 .pdf version)
Page viii
Change second paragraph to read:
Referencing OET Bulletin 65 (Edition 97-01, August 1997) from the Federal
Communications Commission's Office of Engineering & Technology, limits for the
maximum permissible exposure (MPE) to microwave signals have been adopted by the
FCC for General Population/Uncontrolled environments. This limit is 1.0 mW/cm2, with
averaging time of thirty minutes.
Change 8th paragraph to read
For example, a logarithmic power gain of 17.5 dB is equal to a numeric gain of 56.23.
Change 9th paragraph to read
Assuming (1) maximum output power from the N2-X Ethernet Extender (+12 dBm[15.8 mW]),
(2) no signal loss in the cable connecting the N2-X Ethernet Extender to the antenna, and (3)
the use of a 17.5 dBi gain flat panel antenna, the 1.0 mW/cm2 MPE power density limit would be
reached at a distance of approximately 8.4 cm. The N2-X Ethernet Extender is classified as a fixed
installation product, and per FCC policy guidelines regarding MPE, antenna installers must
maintain a separation distance of 20 cm or the resulting calculation of distance from transmitter
EIRP, whichever is the greater distance.
Page B-2
Make the following changes to Table B.1:
Eliminate last column , heading: 2.5ft (0.8mm) antenna
Correct heading of second column to read: 2ft. (0.6m) Antenna
Correct dimension K, column 2 to read: 24" (610mm)
Page 9
Change footnote to Table 2.3 - Recommended Antennas to read:
*The 4-foot dish antennas are for use outside the USA only, and are not FCC compliant.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:04:30 17:48:30
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:04:30 17:48:31-04:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EV9N2X5-3S1-16B

Navigation menu