Wirelesssir Electronics D-DL1645 TV headsets User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3427084
Application ID	5SwPnT9AaxeAcCPmNzIT8w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.79kB (247423 bits)
Date Submitted	2017-06-15 00:00:00
Date Available	2017-06-15 00:00:00
Creation Date	2017-05-22 20:03:37
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-05-22 20:04:40
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

MODEL No.:D‐DL1645
2.4GHz Double Digital Wireless TV Headset
Assistive Listening Device
(For Home&Personal Use)
USER MANUAL
INTRODUCTION
This TV Lover Series Wireless Headset adopted 2.4GHz technology that convert TV audio output to headset for assistive tv
listening in your living room.With its ergonomic earplug design, it brings comfortable wearing,clear dialogues and perfect
stereo sound without burden of disturbing others while connecting to TV,hi‐fi system,radio or other audio sources.
To maximize your product's life‐span,please read and follow the instructions carefully before using.
A.CONTENTS
1.Transimitter
2.Headset(Receiver)
3.Dual 3.5mm audio cable(1.5m)
4.3.5mm jack to RCA adaptor
( /
5.AC power adapter(DC/12V)
6.Multi‐use screw driver
7.Extra earbuds
8.User manual
9.Fiber optic signal line
10.Coaxial cable line
B.FEATURES
1.Bendable PP rod for headset,softer& more flexible
2.User replaceable,rechargeable Li‐ion battery
3.Longer battery operating time
4.Ergonomic earplug design for comfortable wearing
5.Adujustable volume control,balance control
6.Up to 125dB output deliver excellent stereo sound
7.Automatic Gain Control(AGC)
8.Noise Reduction technology
9.Dual headset charging Ports
10.Headset auto turn off function when charging
11.Headset auto alarm function while battery low
12.Compatible with Digital and analog signal input mode,including optical fiber and coaxial cable input,3.5mm analog
signal input
C.TECHNICAL SPECIFICATIONS
Modulation
Carrier Frequency
Frequency Response
Distortion
:Stereo
:2.4GHz
:20‐20KHz
:Less than 1%
S/N Ratio
:~Typ.90dB
Operating Distance
Charging Time
Operating Time
Operation Voltage
: 15m in open area
:~15m
:3‐4 Hours(fast charging)
:~7‐8 hours
:Transmitter,12V DC power adpator(incl.)
:Headset,3.7V,500mAH Li‐polymer battery(incl.)
I.PAIRING EXTRA HEADSET
D.PRODUCT OVERVIEW
Note:There is no limit to the quantity of headsets that connect to one transmitter.
1.TRANSMITTER
1).Switch off "H" the transmitter on/off switch before pairing extra headset.
2).Press ② the headset on/off button to turn on the headset.The built‐in Led in headset will blink in red slowly.Keep
pressing the on/off button for 3 seconds,then,it will blink fast to enter into pairing mode.
Note:There have 15 seconds for headset to pairing with transmitter.
3).Switch on "H" the transmitter on/off switch to turn on the transmitter."L"the transmitter power indicator will light up
in blue and blink fast to match with headset in 3 seconds,then stay in blue after pairing successfully.
J.TROUBLE SHOOTING
NO SOUND?
>The TV sound is "mute".The system can not work in TV mute mode.Keep at least a few volume of the TV,then adjust the
headset volume.
>Make sure the transmitter is on,and the headset have fresh battery.If the headset's battery capacity is low,sound
distortion will be heard.Charge your headset.
>Check if connected audio equipment is not playing.Start playing the equipment.
>Make sure the connected audio equipment is ON and its volume is set properly.
properly
>The volume of headset is too low,adjust the volume to an appropriate level.Turn up your audio source's volume.
(FRONT)
DISTORTION?
>Headset's battery capacity is too low.Charge the headset.
>Ensure the volume level or balance of headset is adjusted properly.
>The input level of the audio signal is too low.Turn up the volume of the audio source equipment.
(REAR)
K.GUIDANCE OF TRANSMITTER INDICATOR
You can know the system status by checking the transmitter indicator illustration of this wireless TV system.
2.HEADSET
1.Transimitter on,headset off‐>"L" transmitter indicator quartic blink continously
2.Transmitter on,headset on,no signal‐>"L"transmitter indicator double blink continously
3.Transmitter on,headset on,signal in‐>"L"transmitter indicator stay in blue
4.Pairing mode‐>"L" transmitter indicator fast blink continously
L.CARE AND MAINTAINENCE
Any improper use may damage the unit and affect its functions.To best protect and care for this wireless TV headset
system,please read the following tips before using:
1.Keep the transmitter and headset away from direct sun exposure.
2.Turn off the transmitter and headset if not in use.
3.Use a slightly damp cloth to clear the outside of the unit.Avoid letting any liquids into the system.
4.Keep it our reach of the children.It may damage when a sudden drop down occurs.
E.COMPONENTS IDENTIFICATION
F.BATTERY CHARGING AND REPLACEMENT
1.TRANSMITTER
IMPORTANCE:Please have your headset fully charged before use,that'll extend the battery life.
A & B.Transmitter power indicator and charging indicator
C.Headset charging cradle
D.3.5mm MIC input Jack
E.3.5mm Line input Jack
F.Coaxial cable input Jack
G.Optical fiber input Jack
H.Power switch OFF/ON
I.DC12V power input Jack
L.Working indicator
Battery charging:There will have 6 times of alarm sound comes from headset every 30 seconds when battery is low.Put the headset
into "c" the headset charging cradle to start charging(System will auto shut off in 3 minutes after the alarm sound to protect the
battery).
1).Connect one end of the supplied AC power adapter to a power outlet,and another end to "I" the DC in jack which located at the
rear of the transmitter.Then,"A or B" the headset charging leds will light up in red.
2).Insert the headset into "C“ the charging cardle of transmitter. "A or B" the charging power indicators will change from blue to
Red(Note:After 4‐5 hours when fully charged,The charging indicator will change from Red to blue).
Battery replacement:Use the supplied multi‐use screw driver to remove the screw out in battery compartment which locates at
rear of the headset, open ④ the battery compartment,and replace the inner battery with a new one.
G.INSTALLATION
1).Check "H" the transmitter on/off switch is off.Connect one end of the supplied AC power adapter to a power outlet,and another
end to "I" the DC in jack which located at rear of the transmitter to enter "Standby mode" ."A & B" the headset charging indicator
will light up in blue.(You can also charge the headset when transmitter is in standby mode).
2).Connect the system to TV or other audio equipment with supplied audio adaptors according to following connecting
options.Note: The headset will auto turn off if there is no signal input for 3 minutes.
Important:You MUST connect the transmitter to "OUTPUT" of your TV or other audio equipment.
Option A.Using 3.5mm to 3.5mm cable Insert one end of the 3.5mm jack into "E" the audio in jack at rear of the transmitter.Insert
another end of 3.5mm jack to "headphone"socket of your TV or other audio equipment that connect to.
Option B.Using 3.5mm to 2RCA adaptor:Insert one end of the 3.5mm cable into 3.5mm RCA cable, another end of 3.5mm cable
into "E" the audio in jack at rear of the transmitter. Connect 3.5mm RCA jack to corresponding red and white sockets of your TV or
other audio equipment that connect to.
Option C.Using optical fiber and coaxial cable:If your TV have digital output,connect optical fiber or coaxial cable to "F or G" the
digital input jack at rear of the transmitter,and connect them to your TV digital output Jack.
2.HEADSET
3).Press ② the headset on/off button to turn on the headset,then, switch on "H" the transmitter on/off switch to use the system.
H.START TO USE
①Ergonomic Earplug
②Headset ON/OFF button
③Volume control
④Swappable battery compartment
⑤Balance control
1).Put ① the ergonomic earplug in your ears.Keep its front(the heart logo)facing towards the transmitter.
Note:The bendable PP rods of headset were ergonomically designed to bring max.comfortableness to user.
2).Rotate ③ the volume control of headset to your preferred volume level.
3).Use the supplied multi‐use screw driver to adjust ⑤ the balance control that locate at rear of headset's right side if the loudness
is not the same in both ears.
4) After use,turn
4).After
use turn off the headset and return it to “C"
C the headset charging cradle on transmitter to charge for later use or
store.Keep the front face of the headset and the transmitter in consistency to avoid reverse charging.
Note:When you forgot to turn off the headset, headset will auto off when being placed in charging cradle.
Please note:
You only need to choose a way of signal input:optical fiber or coaxial cable or 3.5mm signal input!
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:05:22 20:03:37+08:00
Modify Date                     : 2017:05:22 20:04:40+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : 
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:22 20:04:40+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:83b5d5e7-9608-4688-81c4-3e0d4dc8fedd
Instance ID                     : uuid:668806b0-c066-4596-b776-f45cc62850f0
Page Count                      : 5

EXIF Metadata provided by EXIF.tools