Wistron NeWeb CB1GI210C Integrate with certified module-End product User Manual UMC I210C Rev 2 3 20150608

Download:
Mirror Download [FCC.gov]
Document ID	2648755
Application ID	AmE5Wq0Yd+P/lgtP9R3nSQ==
Document Description	User Manual V1.0
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.66kB (470765 bits)
Date Submitted	2015-06-16 00:00:00
Date Available	2015-06-16 00:00:00
Creation Date	2015-06-08 20:29:17
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2015-06-08 20:29:17
Document Title	UMC-I210C User Manual_Rev 2.3_20150608
Document Creator	PDFCreator Version 1.2.3
Document Author:	10311036

Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 1 OF 12
UMC-I210C User Manual
The document contains proprietary information which is the property of Wistron NeWeb
Corporation and is strictly confidential and shall not be disclosed to others in whole or in
part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus
without the written permission of Wistron NeWeb Corporation.
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
Revision History
Issue Date
Version
Description
2015/04/16
0.0
Initial Issued
2015/04/30
0.1
Add freq. mapping table and tx output power setting
2015/05/06
0.2
Modify Zigbee Test Center Frequency Setting (i.e. CH. No.)
2015/05/06
1.0
Change document file name to match FCC application form
2015/05/12
2.0
Add LTE antenna gain table
2015/05/26
2.1
Add FCC Warning Message and Note for LTE antenna gain
2015/05/27
2.2
Correct typo
2015/06/08
2.3
Add required description by FCC Part 15.21
Wistron Neweb Corporation Proprietary & Confidential
REV: 2.3
PAGE 2 OF 12
Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 3 OF 12
Contents
1. Introduction ..................................................................................................... 4
2. Test Setup Configuration ............................................................................. 5
2.1 Power Supply and Debug Console Connection ........................ 5
2.2 Antenna Connection ............................................................................ 6
2.3 Hardware Component Introduction ............................................. 7
3. Zigbee Test ........................................................................................................ 8
3.1 Setup socat Server in CB Device ..................................................... 8
3.2 Setup socat Client in PC host ........................................................... 9
3.3 Zigbee Test Command (Refer to Ember Node Test) ............ 10
4. LTE B4/B13 Test .......................................................................................... 12
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
1.
REV: 2.3
PAGE 4 OF 12
Introduction
This User Manual of Victor CB (Communication Board) module is to describe how to use
the following sections for lab test by specific qualified engineers or technicians.
Furthermore, this module is NOT intended for commercial use but designed as part of
Smart Meter product which mainly provides 4G LTE WAN access and/or Zigbee HAN
access capabilities. For the procedure of CB installation into electric meter and the
operation of CB in assembly factory, that information is described in assembly instruction
document.
FCC Interference Statement
This module complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This module may not cause harmful interference and (2) this module
must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Statement
This module complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This module should be installed and operated with minimum distance of
20cm between radiator and human body.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the device.
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
2.
REV: 2.3
PAGE 5 OF 12
Test Setup Configuration
2.1 Power Supply and Debug Console Connection
Interface Board
AC-DC 5V Adaptor
DUT (CB)
USB Debug Port Console
Power on Sequence:
I. Connect 12-pin-to-Jig-baord cable
II. Attach AC-DC Adaptor & USB Debug Port Cable
III. Wait for 20 seconds when system ready (See Note 1)
IV. Plug-in Console Port cable
[Caution] Improper power on sequence might lead to system boot-up
failure!
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 6 OF 12
2.2 Antenna Connection
Connect to LTE primary antenna
Connect to LTE diversity antenna
Connect to Zigbee antenna
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 7 OF 12
2.3 Hardware Component Introduction
AC-DC 5V Adaptor
Interface Board
Victor CB
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
3.
REV: 2.3
PAGE 8 OF 12
Zigbee Test
3.1 Setup socat Server in CB Device
Telnet 192.168.0.1 into CB and run the commands below.
Login: root
Password: gridnet
[root@Grid –NetOS ~] # socat TCP-LISTEN:6666,fork
/dev/ttyS2,raw,b115200,echo=0
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 9 OF 12
3.2 Setup socat Client in PC host
Unpack socat.7z and install into PC and change directory to that.
Execute the commands below.
D:\Test Tool\socat> socat - tcp4:192.168.0.1:6666
Press “ Enter “ twice.
Note, the socat binaries compiled for windows can be found in
http://blog.gentilkiwi.com/downloads/socat-1.7.2.1.zip
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
REV: 2.3
PAGE 10 OF 12
3.3 Zigbee Test Command (Refer to Ember Node Test)
Freq. channel setting:
Channel Low
setchannel 0x0B
: 0x0B -> CH11
Channel Middle : 0x12 -> CH18
Channel High
: 0x19 -> CH25
Antenna selection:
gpioout a 0
Power mode setting:
settxpowmode 1 1
Power level setting:
setTxPower -3
Single tone output:
txTone
Modulation signal output:
txStream
Wistron Neweb Corporation Proprietary & Confidential
Design Document
Subject: UMC-I210C User Manual
Wistron Neweb Corporation Proprietary & Confidential
REV: 2.3
PAGE 11 OF 12
Design Document
Subject: UMC-I210C User Manual
4.
REV: 2.3
PAGE 12 OF 12
LTE B4/B13 Test
It is suggested to use Anritsu MT8820C for RF conductive tests.
For LTE radiation tests, the LTE antenna gain lists below.
LTE Main Antenna
Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi
Band 4 Peak Gain: 4.5 dBi ~ 5.0 dBi
LTE Diversity Antenna
Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi
Band 4 Peak Gain: 2.5 dBi ~ 3.0 dBi
Wistron Neweb Corporation Proprietary & Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 7f632181-1035-11e5-0000-c7cfa2b8bcc.
Producer                        : GPL Ghostscript 9.04
Keywords                        : ()
Modify Date                     : 2015:06:08 20:29:17+08:00
Create Date                     : 2015:06:08 20:29:17+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Document ID                     : uuid:7f632181-1035-11e5-0000-c7cfa2b8bccÖè@—Òc%.
Format                          : application/pdf
Title                           : UMC-I210C User Manual_Rev 2.3_20150608
Creator                         : 10311036
Description                     : ()
Author                          : 10311036
Subject                         : 

EXIF Metadata provided by EXIF.tools