Wistron NeWeb P705 Bluetooth Adapter User Manual

Wistron NeWeb Corporation Bluetooth Adapter

User Manual

           DBUB-P705   Bluetooth Adapter User’s Manual This document provides safety instructions and describes the specifications. Read this document carefully before installing to ensure your safety and product performance.
Federal Communication Commission (FCC) Interference Statement This device complies with Part 15B and 15C of FCC Rules and RSS-210 of IC Rules. Operation is subject to the following two conditions: (1)  This  device  may not  cause  harmful  interference,  and  (2) this device must accept any interference received, including interference that may cause undesired operation of this device.  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.    These limits are designed to provide  reasonable  protection  against  harmful  interference  in  a  residential installation.  This  equipment  generates,  uses  and  can  radiate  radio  frequency energy and, if not installed and used in accordance with the instructions, may cause  harmful  interference  to  radio  communications.    However,  there  is  no guarantee  that  interference  will  not  occur  in  a  particular  installation.    If  this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: Any changes or modifications not expressly approved by the party responsible  for  compliance  could  void  the  user's  authority  to  operate  this equipment.  This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.  Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement:    The  product  comply  with  the  FCC  portable  RF  exposure  limit  set  forth  for  an uncontrolled  environment  and  are  safe  for  intended  operation  as  described  in  this
manual. The further RF exposure reduction can be achieved if the product can be kept as far as  possible from the user body or  set the device to  lower output power if such function is available.    Industry Canada statement:Industry Canada statement:Industry Canada statement:Industry Canada statement:    This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce  dispositif  est  conforme  à  la  norme  CNR-210  d'Industrie  Canada  applicable  aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:  (1)  le  dispositif  ne  doit  pas  produire  de  brouillage  préjudiciable,  et  (2)  ce dispositif  doit  accepter  tout  brouillage  reçu,  y  compris  un  brouillage  susceptible  de provoquer un fonctionnement indésirable.   Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  Déclaration dDéclaration dDéclaration dDéclaration d''''exposition aux radiations:exposition aux radiations:exposition aux radiations:exposition aux radiations: Cet  équipement  est  conforme  aux  limites  d'exposition  aux  rayonnements  IC  établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20    cm de distance entre la source de rayonnement et votre corps.    TaiwanTaiwanTaiwanTaiwan    statementstatementstatementstatement::::    第十二條     經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。  第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停
用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Caution:   Be aware of the following limits before using the Bluetooth Adaptor.  Do not subject the Bluetooth Adaptor to high temperatures, direct sunlight or moisture.  Do not bend, or subject the Bluetooth Adaptor to strong impacts.  Do not disassemble or alter the Bluetooth Adaptor in any way.  Do not attempt to install the Bluetooth Adaptor in any incompatible device.  Do not remove the Bluetooth Adaptor from the TV’s during operations.  Data transmitted and received over radio waves may be intercepted and monitored.  To avoid malfunctions caused by radio wave interface, keep the TV away from the devices such as other wireless devices, microwaves and the devices that use 2.4 GHz signals when using the Bluetooth Adaptor.  Depending on the area, this Bluetooth Adaptor may not be available.
Setup the Bluetooth connection  The Bluetooth adapter is pre-installed in the TV set. No extra installation steps are required  for  users.  Follow  the  steps  below  to  start  using  the  feature  of  this adapter:  1. Turn on your TV. 2. Switch to the channel that delivers 3D contents. If you are watching a disc with 3D contents, you will also need to activate your player for playing the disc. 3. Turn on your 3D glasses.     4. The 3D glasses will pair with this Bluetooth adapter automatically and are now ready for use.
Specification  Power supply  DC 3.3V    ,   105mA Antenna  Tx 1, Rx 1 Host Interface  USB 2.0 + GPIO x1   Standard Compliance  Bluetooth 3.0 Frequency Range  2.4 GHz (2.40GHz-2.4835GHz) Modulation ・GFSK ・Pi/4 QPSK ・8DPSK Receiver Sensitivity -88 dBm(typ.) GFSK, 0.1%BER -85 dBm(typ.) for pi/4-DQPSK, 0.01%BER Transfer rate (standard) *  3.0Mbps(MAX, Theoretical Value) Output Power  Class 1, 8dBm typical   Security  BT E0/AES/SAFER+  * Transfer rate are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.  SpecificationsSpecificationsSpecificationsSpecifications

Navigation menu