Wistron NeWeb P705 Bluetooth Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1823137
Application ID	Lpt3qQAjM5N4einfM5ddnw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.14kB (114294 bits)
Date Submitted	2012-10-25 00:00:00
Date Available	2012-10-25 00:00:00
Creation Date	2012-10-24 19:10:52
Producing Software	GPL Ghostscript 9.0
Document Lastmod	2012-10-24 19:28:36
Document Title	20120905 DBUB-P705 BT Adaptor Manual _type approval_ to ADT v0.01 rev
Document Creator	PDFCreator Version 1.2.0
Document Author:	XeniaHuang

DBUB-P705
Bluetooth Adapter
User’s Manual
This document provides safety instructions and describes the specifications. Read
this document carefully before installing to ensure your safety and product
performance.
Federal Communication Commission (FCC)
Interference Statement
This device complies with Part 15B and 15C of FCC Rules and RSS-210 of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation of this device.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no
guarantee that interference will not occur in a particular installation.
If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if such
function is available.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d'
d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Taiwan statement:
statement:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Caution:
Be aware of the following limits before using the Bluetooth Adaptor.
Do not subject the Bluetooth Adaptor to high temperatures, direct sunlight or
moisture.
Do not bend, or subject the Bluetooth Adaptor to strong impacts.
Do not disassemble or alter the Bluetooth Adaptor in any way.
Do not attempt to install the Bluetooth Adaptor in any incompatible device.
Do not remove the Bluetooth Adaptor from the TV’s during operations.
Data transmitted and received over radio waves may be intercepted and
monitored.
To avoid malfunctions caused by radio wave interface, keep the TV away from the
devices such as other wireless devices, microwaves and the devices that use 2.4
GHz signals when using the Bluetooth Adaptor.
Depending on the area, this Bluetooth Adaptor may not be available.
Setup the Bluetooth connection
The Bluetooth adapter is pre-installed in the TV set. No extra installation steps are
required for users. Follow the steps below to start using the feature of this
adapter:
1. Turn on your TV.
2. Switch to the channel that delivers 3D contents. If you are watching a disc with
3D contents, you will also need to activate your player for playing the disc.
3. Turn on your 3D glasses.
4. The 3D glasses will pair with this Bluetooth adapter automatically and are now
ready for use.
Specification
Specifications
105mA
Power supply
DC 3.3V
Antenna
Tx 1, Rx 1
Host Interface
USB 2.0 + GPIO x1
Standard Compliance
Bluetooth 3.0
Frequency Range
2.4 GHz (2.40GHz-2.4835GHz)
・GFSK
Modulation
・Pi/4 QPSK
・8DPSK
Receiver Sensitivity
Transfer rate (standard)
-88 dBm(typ.) GFSK, 0.1%BER
-85 dBm(typ.) for pi/4-DQPSK, 0.01%BER
3.0Mbps(MAX, Theoretical Value)
Output Power
Class 1, 8dBm typical
Security
BT E0/AES/SAFER+
* Transfer rate are theoretical values; however, actual communication rate will
vary according to communication environment or connected equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : GPL Ghostscript  9.0
Keywords                        : 
Modify Date                     : 2012:10:24 19:28:36+08:00
Create Date                     : 2012:10:24 19:10:52+08:00
Creator Tool                    : PDFCreator Version 1.2.0
Metadata Date                   : 2012:10:24 19:28:36+08:00
Document ID                     : 02fb0772-2027-11e2-0000-76cd9db972e7
Instance ID                     : uuid:368b33db-3f34-4ede-bae7-063157fce06b
Format                          : application/pdf
Title                           : 20120905 DBUB-P705 BT Adaptor Manual _type approval_ to ADT v0.01 rev
Creator                         : XeniaHuang
Description                     : ()
Page Count                      : 6
Subject                         : 
Author                          : XeniaHuang

EXIF Metadata provided by EXIF.tools