Wistron NeWeb VM43B WLAN 802.11a + b combo mini-PCI User Manual Acrobat Distiller Job 2

Wistron NeWeb Corporation WLAN 802.11a + b combo mini-PCI Acrobat Distiller Job 2

UserManual.wiki >

Wistron NeWeb >

VM43B User Manual

Manual

11啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comSoftware User GuideVersion : 1.0Date : 2002/08/09

22啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comMain Frame Description................................................................................................ 4Configuration Setting .................................................................................................... 5Security Setting ............................................................................................................. 7

33啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, (example - use only shieldedinterface cables when connecting to computer or peripheral devices) anychanges or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.Statement Needed to be Shown on End ProductSince this module is installed inside the end product, the end product shouldbe affixed a label on visible area showing that this product contain a RFmodule, and also its FCC ID.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.

55啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comConfiguration Setting Configuration Name: This field identifies the configuration. This namemust be unique. Configuration names are case insensitive. Network Name: This is the name of the IEEE 802.11a or 802.11b wirelessnetwork, for example, “IEEE 802.11a Wireless Network”. This field has amaximum limit of 32 characters. Network Connection: This field defines whether the adapter isconfigured for an ad hoc or infrastructure network. Power Saving: This field allows the configuration of power managementoptions. The options are Off, Normal, and Maximum. Power managementis disabled when ad hoc mode is selected in the Network Connection field.9 When the Power Saving setting is Off, the adapter

66啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comreceives full power from the PC.9 When the Power Saving setting is Normal, the driverturns off power to the adapter for brief periods overbriefly-spaced time intervals.9 When the Power Saving setting is Maximum, the driverturns off power to the adapter for longer periods overmore widely-spaced time intervals. Wireless Mode: Specifies 802.11a, 802.11b, or auto-select operation.Auto-select allows the use of both 802.11a and 802.11b modes. Ad-Hoc Net Start: Specifies a band to establish an ad-hoc network if nomatching SSID is found after scanning all available modes. 802.11a Turbo: Turbo mode for 802.11a radio space. Once enabled,channel for 802.11a turbo modes are scanned. 802.11b Range: Specifies the normal range or extended range on the 2.4GHz. Encryption Type: Specifies the encryption type.9 WEP – use only WEP encryption9 AES – only associate with Access Points that cansuccessfully negotiate AES encryption.9 Auto – allow the STA and AP to negotiate theencryption type. Scan Mode: Specifies passive, or auto scanning (use country code toselect the type of scan, active or passive). Transmit Power: Selects 100%, 50%, 25%, 12.5%, or lowest transmitpower. QoS: Disable or enable the station to cooperate in a network using Qualityof Service. Country: You can select the country code and these regions representthree regulatory domains, namely the FCC, ETSI, and MKK. 2.4GHz Preamble: Specifies short & long, or long preamble. Allows ad-hoc compatibility with other 2.4 GHz devices.

77啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.comSecurity Setting Enable Security: This field completely enables or disables the IEEE802.11 wired equivalent privacy (WEP) security feature. Default Encryption Key: This field defines the type of encryption key touse (either Unique Key or Shared Keys). This field allows you to selectonly a key (Unique, First, Second, Third, or Fourth) whose correspondingfield has been completed. Unique Keys: This field defines the unique encryption key for security forthe current network configuration. In ad hoc mode, this encryption keytype is not used. To enable security using a Unique Key, this field must bepopulated. Shared Key: These fields define a set of shared encryption keys. Toenable security using Shared Keys, at least one Shared Key field must be

88啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司啟碁科技股份有限公司No. 10-1 , Li-hsin Road IScience-based Industrial Park ,Hsinchu 300,Taiwan, R.O.C.Tel: 886-3-6667799Fax: 886-3-6667711Web site: www.wneweb.compopulated. Key Length: This field defines the length for each encryption key. As theKey Length is changed, the number of available characters in the field ischanged automatically. If after a key is entered the length is adjusted to asmaller number, the key is automatically truncated to fit. If the length isincreased again, the field is not automatically updated to its previousvalue.

Navigation menu