Wistron NeWeb XRBH BLE Module User Manual XRBH BLE module V03

Download:
Mirror Download [FCC.gov]
Document ID	3125724
Application ID	Qs5kOfoBqDAuWNYJyB1Sjw==
Document Description	User Manual_20160824_v1 - User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.62kB (332717 bits)
Date Submitted	2016-09-07 00:00:00
Date Available	2016-09-07 00:00:00
Creation Date	2016-08-01 10:25:49
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2016-08-01 11:30:39
Document Title	XRBH_BLE_module_User Manual_V03
Document Creator	PDFCreator Version 1.2.3
Document Author:	10407032

XRBH User Manual
(V0.2)
Model Name:
Description:
XRBH BLE MODULE
BLE module compatible
This document contains proprietary information which is the property of Wistron NeWeb
Corporation and is strictly confidential and shall not be disclosed to others in whole or in part,
reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the
written permission of Wistron NeWeb Corporation.
Revision History
Edition #
Reason for revision
V0.1 Initial Document (Draft version)
V0.2 Add FCC/NCC Label Compliance Statement
V0.3 Delete Product Overview
BLE module Delivery Specification
Issue date
2016/07/28
2016/07/29
2016/08/01
V0.3
NRF51822 Block Diagram
BLE module Delivery Specification
V0.3
Specification
CATEGORIES
FEATURE
Bluetooth®
V4.0 (Single Mode/Bluetooth Smart)
Frequency
2.402 - 2.480 GHz
Max Transmit Power
2dBm
Wireless Specificiation Receive Sensitivity
-93dBm (Low power mode)
Whisper Mode
-30 dBm (Transmit)
Link Budget
95 dB (@ 1 Mbps)
Raw Data Rates
1 Mbps (over the air)
Total
14 lines – multi function
UART
TX, RX
Default 115200, N, ,8, 1
Host Interfaces
Encryption
Memory
Physical
From 1,200 to 115,200bps
GPIOs
14
SPI
3 lines
I2C
2 lines
ADC
6 lines (plus ADC reference)
AES
128 bit using CCM encryption
Flash
256KB
RAM
32KB
Dimensions
16.5mm x 12mm x 2.65mm
RF
32MHz crystal embedded
RTC
32.768KHz crystal embedded
Clock Management
Environmental
Miscellaneous
Operating Temperature -10° to +65° C
Storage Temperature
-10 ˚C to +65 ˚C
Lead Free
Lead-free and RoHS compliant
BLE module Delivery Specification
V0.3
Electrical characteristics
Low power mode
Symbol
Minimum
Typical
Maximum
Unit
VCC
1.8
1.8
1.8
Symbol
Minimum
Typical
Maximum
Unit
VCC
1.8
3.6
LDO mode
Power consumption
Symbol
Description
Typical
Unit
IOFF
System off current
consumption
0.6
uA
IIDLE
3V ON, all blocks idle
2.6
uA
Mechanical Dimension
BLE module Delivery Specification
V0.3
BLE module Delivery Specification
V0.3
PIN Define
Pin number
Name
Function
Description
P0.02
AIN3
Digital I/O
Analog input
General purpose I/O 2
ADC input 3
P0.01
AIN2
Digital I/O
Analog input
General purpose I/O 1
ADC input 2
P0.03
AIN4
Digital I/O
Analog input
General purpose I/O 3
ADC input 4
P0.05
AIN6
Digital I/O
Analog input
General purpose I/O 5
UART RXD
P0.04
AIN5
Digital I/O
Analog input
General purpose I/O 4
UART TXD
P0.10
VDD
DEC2
Digital I/O
Power
Power
General purpose I/O 10
Power input
Power supply decoupling
P0.06
AIN7
AREF1
Digital I/O
Analog input
Analog input
General purpose I/O 6
ADC input 7
ADC Reference voltage
10
P0.07
Digital I/O
11
12
GND
GND
Ground
Ground
13
SWDCLK
Digital input
HW debug port
Flash programming I/O
14
nRESET
SWDIO
Digital I/O
System reset (low active)
HW debug port
Flash programming I/O
15
P0.16
Digital I/O
General purpose I/O 16
16
P0.15
Digital I/O
General purpose I/O 15
17
P0.12
Digital I/O
General purpose I/O 12
18
P0.11
Digital I/O
General purpose I/O 11
19
P0.09
Digital I/O
General purpose I/O 9
20
P0.08
Digital I/O
General purpose I/O 8
BLE OTA mode, Low active
BLE module Delivery Specification
General purpose I/O 7
TX_IRQ
Ground
Ground
V0.3
21
22
23
24
25
26
27
RF_OUT
GND
P0.18
P0.20
P0.17
P0.19
P0.14
BLE module Delivery Specification
Ground
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
RF output port for external antenna
Ground
General purpose I/O 18
General purpose I/O 20
General purpose I/O 17
General purpose I/O 19
General purpose I/O 14
V0.3
Recommend Land Pattern
BLE module Delivery Specification
V0.3
Antenna Type
Antenna Vendor
YAGEO
Antenna Type
CHIP ANTENNA
Antenna PN
ANT3216LL12R2400A
Antenna Specification
Test condition
BLE module Delivery Specification
V0.3
BLE module Delivery Specification
10
V0.3
3D Raidation Pattern
BLE module Delivery Specification
11
V0.3
FCC Compliance Statement
(1)
(2)
(3)
(4)
FCC Label Compliance Statement:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
End Product Labeling:
This transmitter module is authorized only for use in device where the
antenna may be installed such that 20 cm may be maintained between
the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID: NKR-XRBH”
”.
The grantee's FCC ID can be used only when all FCC compliance
requirements are met.
Radiation Exposure Statement
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained
BLE module Delivery Specification
12
V0.3
between the antenna and users, and
2) The transmitter module may not be co-located with any other
transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not
be required. However, the OEM integrator is still responsible for
testing their end-product for any additional compliance requirements
required with this module installed
(5)
(6)
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then
the FCC authorization is no longer considered valid and the FCC ID
can not be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC
authorization.
Radiation Exposure Statement:
1) Any changes or modifications not expressly approved by the grantee
of this device could void the user's authority to operate the equipment.
2) This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
Manual Information To the End User:
The OEM integrator has to be aware not to provide information to the
end user regarding how to install or remove this RF module in the user’s
manual of the end product which integrates this module.
The end user manual shall include all required regulatory
information/warning as show in this manual
BLE module Delivery Specification
13
V0.3
本產品符合低功率電波輻射性電機管理辦法
第十二條
※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更
頻率、加大功率或變更原設計之特性及功能。
第十四條
※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應
立即停用，並改善至無干擾時方得繼續使用。
-前項合法通信，指依電信法規定作業之無線電通信。
-低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
此模組若安裝於其他平台時，該平台標籤需標明：
此平台內建無線模組
BLE module Delivery Specification
14
V0.3
Application Note
XRBH has embedded 32MHz crystal, which is difference to the Development Kit. In order to let
32MHz crystal works that you can enable it explicitly with the following code:
void Clock_settings_32_MHz_func(void)
// Start 32 MHz crystal oscillator.
NRF_CLOCK->XTALFREQ = 0x00;
NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
NRF_CLOCK->TASKS_HFCLKSTART
= 1;
// Wait for the external oscillator to start up.
while (NRF_CLOCK->EVENTS_HFCLKSTARTED == 0)
// Do nothing.
BLE module Delivery Specification
15
V0.3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2016:08:01 10:25:49+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2016:08:01 11:30:39+08:00
Metadata Date                   : 2016:08:01 11:30:39+08:00
Format                          : application/pdf
Description                     : 
Creator                         : 10407032
Title                           : XRBH_BLE_module_User Manual_V03
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:a85c15e4-e7d4-4041-8f12-40582e023640
Instance ID                     : uuid:ac66f7d4-b34b-4b70-a9a5-4a1fd00220d7
Page Count                      : 16
Subject                         : 
Author                          : 10407032

EXIF Metadata provided by EXIF.tools