Wistron IPNTYS05N 1140E IP Deskphone User Manual Quick Guide New

Download:
Mirror Download [FCC.gov]
Document ID	1665191
Application ID	6LKlLJGitVixSn5LVWq9gA==
Document Description	guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.06kB (413293 bits)
Date Submitted	2012-03-29 00:00:00
Date Available	2012-03-30 00:00:00
Creation Date	2012-03-27 16:20:55
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-03-27 16:20:55
Document Title	Microsoft Word - Quick Guide-New
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Scott

Avaya 1140E IP Deskphone features
•
Figure 1
•
•
•
•
•
•
•
Six user-defined feature keys with labels and indicators
Four soft keys
Graphical, high-resolution LCD display, backlit, with adjustable contrast
High-quality speaker phone
Volume control keys for adjusting ringer, speaker, handset, and headset volume
Six specialized feature keys:
— Quit, Directory, Message/Inbox, Shift/Outbox, Services, Copy
Six call-processing fixed keys:
— Mute, Handsfree, Goodbye, Expand to PC, Headset, Hold
Gigabit Ethernet ports
Built-in Gigabit Ethernet switch for shared PC access
Headset jack with an On/Off key
USB port to support a keyboard or mouse
Automatic network configuration
Hearing-aid compatibility
Wireless headset support using a Bluetooth®1.2 technology compliant Audio Gateway
(Headset Profile, Bluetooth Power Class 2)
Features and keys
•
•
•
•
•
•
Connectors
Figure 2
*Note: If supported by your server, the Feature Status Lamp provides a user-defined alert. Contact you r
system administrator to find out if this feature is available for you.
Regulatory Information
Avaya 1140E IP Deskphone Emissions Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: reorient or relocate the receiving antenna,
increase the separation between the equipment and receiver, connect the equipment into an outlet on a
circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio
or TV technician for help.
The user should not make changes or modifications not expressly approved by Avaya. Any such changes
could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
Canada, avis d’Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne doit pas causer d'interférences et
(2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son
fonctionnement.
This device complies with the essential requirements and other relevant provisions of R&TTE directive
1999/5/EC. A copy of the Declaration may be obtained from http://support.avaya.com/css/
appmanager/public/support or Avaya Inc., 211 Mt. Airy Road, Basking Ridge, NJ 07920 USA.
Use only with Avaya-approved Limited Power Source (output rated 48 V DC, 380mA or 520mA) OR using
Power over LAN options, including standard power over Ethernet.
Warning: The earpiece/mouthpiece region on the handset can attract and retain small objects. Privacy of
communications may not be ensured when using this telephone. To prevent radio interference to the
licensed service, this device must be operated indoors only and should be kept away from windows to
provide maximum shielding.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Date: May 2011
Document Release: Standard 02.02
Document Number: NN43113-103
Copyright © 2011 Avaya Inc.
All rights reserved.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Avaya is under
license.
Other trademarks and trade names are those of their respective owners.
Avaya 1140E IP Deskphone
Getting Started
Avaya 1140E IP Deskphone installation
Step 2: Connect the AC power adapter (optional). Connect the adapter to the AC adapter
jack in the bottom of the phone. Form a small bend in the cable, and then thread the adapter
cord through the channels in the stand.
Warning: To use local AC power, use only the Avaya-approved Global Power Supply
(NTYS17xxE6) for this model of phone.
Note 1: Your Avaya 1140E IP Deskphone supports AC power or Power over Ethernet (PoE),
including IEEE 802.3af standard power. To use local AC power, the optional AC adapter can
be ordered separately. To use PoE, where power is delivered over the CAT5e cable, your
connected LAN must support Power over Ethernet. If you use PoE, you do not require an AC
adapter.
Step 8: Wall-mount your phone (optional). Your Avaya 1140E IP Deskphone can be
mounted either by: (Method A) using the mounting holes on the bottom of the phone stand,
or (Method B) using a traditional style wall-mount box with RJ-45 connector and 15-cm (6inch) CAT5e cable (not provided).
Step 3: Install the handset. Connect the end of the handset cable with the short straight
section into the handset. Connect the end of the handset cable with the long straight section to
the back of the phone, using the RJ-9 handset jack marked with the symbol + . Form a small
bend in the cable, and then thread the handset cord through the channels in the stand so that
it exits behind the handset on the right side, in the Handset cord exit marked with the symbol
Step 5: Install the Ethernet cable. Connect one end of the supplied Ethernet cable to the
back of your phone using the RJ-45 connector marked with the symbol % . Thread the
network cable through the channel marked with the symbol % .
Step 6: Install the Ethernet cable connecting the PC to the phone (optional). If you are
connecting your PC to the network through the phone, connect one end of the PC Ethernet
cable to your phone using the RJ-45 connector marked with the symbol ( , and thread it
through the channel marked with the symbol ( . Connect the other end to the LAN connector
Figure 5
in the stand base, as shown in Figure 3.
Step 4: Install the headset (optional). If you are installing a headset, plug the connector into
the RJ-9 headset jack marked with the symbol ) on the back of the phone, and thread the
headset cord along with the handset cord through the channels in the stand, so that the
headset cord exits the channel marked with the symbol ) .
Avaya 1140E IP Deskphone installation and controls
need to remove the phone from the wall to adjust the lower screws. When the lower screws
are snug, install the phone on the mounting screws, and tighten the top screws.
Due to the wide variety of materials and construction techniques, the user is advised to select
an appropriate fastener and/or anchor type for the wall. Please consult your local hardware
store or other expert for assistance in selecting the correct fastener for your application.
Method B: Attach the 15-cm (6-inch) CAT5e cable (not provided), position the stand over the
mounting rivets, and slide the phone down the wall so that the rivets fit into the slots on the
stand, indicated in Figure 4 (Method B).
Step 9: Replace the stand cover. Ensure that all cables are neatly routed and press the
stand cover into place until you hear a click.
Step 10: Put the phone in the wall-mount position (optional). If you wall-mounted your
phone, put it in the wall-mount position by holding the Tilt lever and pressing the phone
towards the base until the phone is parallel with the base. Release the Tilt lever and continue
to push the phone towards the base until you hear an audible click. Ensure the phone is
securely locked in position.
Avaya 1140E IP Deskphone controls:
Note 2: You must use CAT5e (or later) cables if you want to use gigabit Ethernet.
Cable routing tracks
Step 7: Install additional cables. If applicable, plug in optional USB devices. Connect the
Ethernet cable to the LAN Ethernet connection. If you are using an AC power adapter, plug the
adapter into an AC outlet.
Rotate the phone until the phone body is
parallel to the stand.
Removing the stand
Figure 3
Step 1: Remove the stand cover. Pull upward on the center catch as indicated in Figure 3,
and remove the stand cover. The cable routing tracks are now accessible.
on the back of your PC.
Figure 4
Caution: Your Avaya 1140E IP Deskphone is shipped with the base locked in
position. To avoid damaging your phone, press the wall-mount lever, located just
under the Handsfree key as indicated in Figure 5, to release the base and pull it.
Avaya 1140E IP Deskphone installation
Complete steps 1-7, as needed, before you wall-mount your phone:
Method A: Press the wall-mount lever, and pull the phone away from the stand, as shown in
Figure 5. Using the stand cover (the part you removed in step 1), mark the wall-mount holes
by pressing the bottom of the stand cover firmly against the wall in the location where you wish
to install the phone. Four small pins on the bottom of the stand cover make marks on the wall.
Use the marks as a guideline for installing the wall-mount screws (not provided).
Install the screws so that they protrude 3 mm (1/8 inch) from the wall, then install the phone
stand mounting holes over the screw heads as indicated in Figure 4 (Method A). You may
Controlling volume
Press the up or down volume control key while using your handset, headset, or speaker to adjust the
volume of the associated device.
Answering a call
Lift the handset to answer a ringing call, or press the Handsfree or Headset key.
Making a call with the handset
To make a call using the primary line, lift the handset and enter the phone number on the dialpad. If your
phone is programmed with several line keys, press a line key to select a line before calling. When your call
is complete, press the Goodbye key or return the handset to the cradle.
Making a call with the headset or using Handsfree
Press the Headset or Handsfree key. Enter the phone number. When your call is complete, press the
Goodbye key.
Using Hold and Mute
While on a call, press the Hold key to place your caller on hold. Press the line key to retrieve your call. The
icons next to the line keys indicate held lines, while the Mute LED lights when Mute is active. Press
the Mute key to mute your handset, headset, or speaker, allowing you to speak privately. Press the Mute
key again to speak with your caller.
Setting the contrast
To adjust the display contrast, press the Services key, select Telephone Options, and select Contrast
Adjustment. Use the up/down arrow keys or up/down soft keys to change the setting.
Setting the language
To select the language used by the local menus, press the Services key twice quickly to open the local
menu. Select 1. Preferences, select 2. Language, and use the up/down arrow keys to choose the
language.
Note: Use the Telephone Options menu to select the language used by call-server features. Consult the
Avaya 1140E IP Deskphone User Guide NN43113-106 for more information.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Scott
Create Date                     : 2012:03:27 16:20:55+08:00
Modify Date                     : 2012:03:27 16:20:55+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - Quick Guide-New
Creator                         : Scott
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:a36a06b2-cbe8-4c9c-b921-05080b401ff5
Instance ID                     : uuid:c79fbedc-5a34-4d7a-980a-3a6557405fb3
Page Count                      : 2

EXIF Metadata provided by EXIF.tools