Wistron IPNTYS05N 1140E IP Deskphone User Manual 1140e
Wistron Corporation 1140E IP Deskphone 1140e
Wistron >
Contents
- 1. guide
- 2. user manual
user manual
Avaya 1140E IP Deskphone User Guide Avaya Communication Server 1000 Document Status: Standard Document Version: 06.03 Part Code: NN43113-106 Date: May 2011 © 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes. Documentation disclaimer Avaya shall not be responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. End User agree to indemnify and hold harmless Avaya, Avaya’s agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation, to the extent made by End User. Link disclaimer Avaya is not responsible for the contents or reliability of any linked Web sites referenced within this site or documentation(s) provided by Avaya. Avaya is not responsible for the accuracy of any information, statement or content provided on these sites and does not necessarily endorse the products, services, or information described or offered within them. Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages. Warranty Avaya provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product, while under warranty, is available to Avaya customers and other parties through the Avaya Support Web site: http://www.avaya.com/ support Please note that if you acquired the product from an authorized reseller, the warranty is provided to you by said reseller and not by Avaya. Licenses THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE, HTTP://SUPPORT.AVAYA.COM/ LICENSEINFO/ ARE APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC., ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER (AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN AVAYA AUTHORIZED RESELLER, AND AVAYA RESERVES THE RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE. BY INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING, DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER REFERRED TO INTERCHANGEABLY AS "YOU" AND "END USER"), AGREE TO THESE TERMS AND CONDITIONS AND CREATE A BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE APPLICABLE AVAYA AFFILIATE ("AVAYA"). Copyright Except where expressly stated otherwise, no use should be made of the Documentation(s) and Product(s) provided by Avaya. All content in this documentation(s) and the product(s) provided by Avaya including the selection, arrangement and design of the content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property laws including the sui generis rights relating to the protection of databases. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way any content, in whole or in part, including any code and software. Unauthorized reproduction, transmission, dissemination, storage, and or use without the express written consent of Avaya can be a criminal, as well as a civil offense under the applicable law. Third Party Components Certain software programs or portions thereof included in the Product may contain software distributed under third party agreements ("Third Party Components"), which may contain terms that expand or limit rights to use certain portions of the Product ("Third Party Terms"). Information regarding distributed Linux OS source code (for those Products that have distributed the Linux OS source code), and identifying the copyright holders of the Third Party Components and the Third Party Terms that apply to them is available on the Avaya Support Web site: http://support.avaya.com/Copyright. Trademarks The trademarks, logos and service marks ("Marks") displayed in this site, the documentation(s) and product(s) provided by Avaya are the registered or unregistered Marks of Avaya, its affiliates, or other third parties. Users are not permitted to use such Marks without prior written consent from Avaya or such third party which may own the Mark. Nothing contained in this site, the documentation(s) and product(s) should be construed as granting, by implication, estoppel, or otherwise, any license or right in and to the Marks without the express written permission of Avaya or the applicable third party. Avaya is a registered trademark of Avaya Inc. All non-Avaya trademarks are the property of their respective owners. Downloading documents For the most current versions of documentation, see the Avaya Support. Web site: http://www.avaya.com/support Contact Avaya Support Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Web site: http://www.avaya.com/support Revision history Revision history May 2011 Standard 06.03. This document is up-issued to reflect changes in global power supply information. March 2011 Standard 06.02. This document is up-issued to reflect changes in the procedures for cancelling Call Forward. October 2010 Standard 06.01. This document is up-issued to support Unistim 5.0 and Avaya Communication Server 1000 Release 7.5. June 2010 Standard 05.02. This document is up-issued to reflect changes in technical content for Call Log Options, and to add Record on Demand content. June 2010 Standard 05.01. This document is up-issued to support Communication Server 1000 Release 7.0 for UNIStim 4.0. January 2010 Standard 04.02. This document is up-issued to support Communication Server 1000 Release 6.0 for UNIStim 4.0. October 2009 Standard 04.01. Because of the similarity between Communication Server 1000 Release 6.0 for UNIStim 4.0 features and Release 5.5 features, UNIStim 4.0 Release 6.0 documentation is also used for Release 5. Revision history June 2009 Standard 03.02. This document is up-issued to support Communications Server 1000 Release 6.0. May 2009 Standard 03.01. This document is up-issued to support Communications Server 1000 Release 6.0. January 2009 Standard 02.05. This document is up-issued to support Communications Server 1000 Release 5.5 for UNIStim 3.0. This document reflects changes in section Enabling USB Headset. December 2008 Standard 02.04. This document is up-issued to support Communications Server 1000 Release 5.5 for UNIStim 3.0. This document reflects changes in sections Setting up a conference call and Charging a call or charging a forced call. April 2008 Standard 02.03. This document is up-issued to support Communications Server 1000 Release 5.5 for UNIStim 3.0. May 2007 Standard 01.01. This document is up-issued to support CS 1000 Release 5.0. This document reflects the new document number. November 2006 Standard 5.00. This document is up-issued to reflect an update to Regulatory information. Revision history June 2006 Standard 4.00. This document is issued to support Communication Server 1000 Release 4.5 software. Added support for new security features. February 2006 Standard 3.00. This document is issued to support Communication Server 1000 Release 4.5 software. January 2006 Standard 2.00. This document is issued to support Communication Server 1000 Release 4.5 software. November 2005 Standard 1.00. This document is issued to support Communication Server 1000 Release 4.5 software. Revision history Contents Contents Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Getting technical documentation . . . . . . . . . . . . . . . . . . . 15 Getting product training . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Getting help from a distributor or reseller . . . . . . . . . . . . . 15 Getting Help from the Avaya Web site . . . . . . . . . . . . . . . 15 About the Avaya 1140E IP Deskphone . . . . . . . . . . . . . . . . 17 Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Telephone controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Telephone display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 License Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Call features and Flexible Feature Codes . . . . . . . . . . . . . . . 29 Audio and text message broadcast . . . . . . . . . . . . . . . . . . . . 29 WML Browser support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Security features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Using encrypted calling . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Managing your Station Control Password (SCPW) . . . . . 34 Entering and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Entering text using the IP Deskphone dial pad . . . . . . . . . . . . 37 Entering text using the USB keyboard . . . . . . . . . . . . . . . . . . 38 Editing text using the soft keys . . . . . . . . . . . . . . . . . . . . . . . . 38 Connecting the components . . . . . . . . . . . . . . . . . . . . . . . . 40 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Connecting the components of the phone . . . . . . . . . . . . . . . 41 Replacing your narrowband handset with a wideband handset . . 46 Contents Replacing your narrowband headset with a wideband headset . . 46 Virtual Private Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Connecting your IP Deskphone . . . . . . . . . . . . . . . . . . . . . . . 49 QoS configuration recommendations . . . . . . . . . . . . . . . . 51 Installing and configuring VPN . . . . . . . . . . . . . . . . . . . . . . . . 52 Configuring Telephone Options . . . . . . . . . . . . . . . . . . . . . 67 Using the Telephone Options menu . . . . . . . . . . . . . . . . . . . . 68 Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Adjusting the display screen contrast . . . . . . . . . . . . . . . . 70 Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Selecting date and time format . . . . . . . . . . . . . . . . . . . . 72 Accessing display diagnostics . . . . . . . . . . . . . . . . . . . . . 73 Choosing a local dialpad tone . . . . . . . . . . . . . . . . . . . . . 73 Viewing IP Deskphone information . . . . . . . . . . . . . . . . . 74 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Configuring call log options . . . . . . . . . . . . . . . . . . . . . . . 76 Choosing a ring type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Enabling or disabling Call Timer . . . . . . . . . . . . . . . . . . . 82 Enabling OnHook Default Path . . . . . . . . . . . . . . . . . . . . 82 Changing feature key labels . . . . . . . . . . . . . . . . . . . . . . . 83 Configuring the name display format . . . . . . . . . . . . . . . . 85 Configuring Live Dialpad . . . . . . . . . . . . . . . . . . . . . . . . . 86 Configuring Caller ID display order . . . . . . . . . . . . . . . . . 87 Configuring Normal mode indication . . . . . . . . . . . . . . . . 87 Configuring Local Menu options . . . . . . . . . . . . . . . . . . . . 89 1. Preferences submenu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Changing 1. Display Settings . . . . . . . . . . . . . . . . . . . . . . 91 Changing 2. Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Changing 3. Headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Contents Configuring 4. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . 100 2. Local Diagnostics submenu . . . . . . . . . . . . . . . . . . . . . . . 112 1. IP Set Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 2. Network Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . 112 3. Ethernet Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 4. IP Network Statistics . . . . . . . . . . . . . . . . . . . . . . . . . 113 5. USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 6. Advanced Diag Tools . . . . . . . . . . . . . . . . . . . . . . . . . 113 7. License Information . . . . . . . . . . . . . . . . . . . . . . . . . . 113 8. VPN Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 9. Certificate Information . . . . . . . . . . . . . . . . . . . . . . . . 114 10. DHCP Information . . . . . . . . . . . . . . . . . . . . . . . . . . 114 3. Network Configuration menu . . . . . . . . . . . . . . . . . . . . . . 114 4. Lock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Using Off-hook dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Using On-hook dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Using handsfree dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Using the Directory applications . . . . . . . . . . . . . . . . . . . . . . 121 Making a call using the Corporate Directory . . . . . . . . . 121 Making a call using the Personal Directory . . . . . . . . . . 122 Making a call using the Callers List . . . . . . . . . . . . . . . . 123 Making a call using the Redial List . . . . . . . . . . . . . . . . . 124 Using Predial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Using AutoDial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Using Ring Again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Using Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Using Speed Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Using System Speed Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Using HotLine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Contents Using intercom calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 While on an active call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Placing a call on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Transferring a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Using Timed Reminder Recall . . . . . . . . . . . . . . . . . . . . . . . 135 Using Attendant Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Using Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Recording a Calling Party Number . . . . . . . . . . . . . . . . . . . . 139 Displaying incoming calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Tracing a malicious call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Incoming calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Using Automatic Answerback . . . . . . . . . . . . . . . . . . . . . . . . 141 Using Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 While away from your desk . . . . . . . . . . . . . . . . . . . . . . . . 145 Using Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Using Internal Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . 147 Using Remote Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . 148 Securing your IP Deskphone . . . . . . . . . . . . . . . . . . . . . . . . 150 Talking with more than one person . . . . . . . . . . . . . . . . . 152 Using the Call Join feature . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Setting up a conference call . . . . . . . . . . . . . . . . . . . . . . . . . 152 Using Conferee Selectable Display . . . . . . . . . . . . . . . . . . . 154 Using Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 10 Contents Working without interruption . . . . . . . . . . . . . . . . . . . . . . 158 Using Make Set Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Call Deflect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Additional call features . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Using AutoDial Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Using the Buzz signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Using Call Page Connect to make an announcement . . . . . 161 Using Centrex/Exchange Line Switchhook Flash . . . . . . . . . 162 Charging a call or charging a forced call . . . . . . . . . . . . . . . 163 Using Enhanced Override . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Using Forced Camp-on feature . . . . . . . . . . . . . . . . . . . . . . 167 Overriding a busy signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Using Privacy Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Using Radio Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Using Voice Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Additional phone features . . . . . . . . . . . . . . . . . . . . . . . . . 173 Using the Personal Directory . . . . . . . . . . . . . . . . . . . . . . . . 173 Using the Callers List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Using the Redial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Using Virtual Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Logging in to Virtual Office . . . . . . . . . . . . . . . . . . . . . . . 181 Using Virtual Office on your Remote IP Deskphone . . . 182 Using Virtual Office on your Office IP Deskphone . . . . . 185 Logging out of Virtual Office . . . . . . . . . . . . . . . . . . . . . . 186 Emergency calls on your Remote IP Deskphone . . . . . . 186 Automatic log out from Virtual Office . . . . . . . . . . . . . . . 186 Troubleshooting Virtual Office . . . . . . . . . . . . . . . . . . . . 187 Using Media Gateway 1000B . . . . . . . . . . . . . . . . . . . . . . . . 189 Using Test Local Mode . . . . . . . . . . . . . . . . . . . . . . . . . 190 11 Contents Using Resume Normal Mode . . . . . . . . . . . . . . . . . . . . . 190 Troubleshooting MG 1000B . . . . . . . . . . . . . . . . . . . . . . 191 Using Hospitality features . . . . . . . . . . . . . . . . . . . . . . . . . 192 Configuring Automatic Wake-Up . . . . . . . . . . . . . . . . . . . . . 192 Activating Message Registration . . . . . . . . . . . . . . . . . . . . . 194 Using Maid Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Displaying Room Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Accessing External Server Applications . . . . . . . . . . . . . 199 Using Record On Demand key . . . . . . . . . . . . . . . . . . . . . . . 199 Using SAVE key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Flexible Feature Codes (FFCs) . . . . . . . . . . . . . . . . . . . . . 202 Quick Reference Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Feature operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Services and Telephone Options menus . . . . . . . . . . . . . . . 205 Regulatory and safety information . . . . . . . . . . . . . . . . . . 207 Third party terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 Third Party Terms for UNIStim sw releases 4.1 thru 5.0 (Jan 2010 - Nov 2010) . . . . . . . . . . . . . . . . . . . . 213 GNU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 OpenSSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Zlib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Curl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Libpng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Kern_random . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 ConvertUTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Wchar functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Libjpeg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 12 Contents Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 13 Contents 14 Customer Service Customer Service Visit the Avaya Web site to access the complete range of services and support that Avaya provides. Go to www.avaya.com or go to one of the pages listed in the following sections. Navigation • “Getting technical documentation” on page 15 • “Getting product training” on page 15 • “Getting help from a distributor or reseller” on page 15 • “Getting Help from the Avaya Web site” on page 15 Getting technical documentation To download and print selected technical publications and release notes directly from the Internet, go to www.avaya.com/support. Getting product training Ongoing product training is available. For more information or to register, you can access the Web site at www.avaya.com/support. From this Web site, you can locate the Training contacts link on the left-hand navigation pane. Getting help from a distributor or reseller If you purchased a service contract for your Avaya product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. Getting Help from the Avaya Web site The easiest and most effective way to get technical support for Avaya products is from the Avaya Technical Support Web site at www.avaya.com/support. 15 Customer Service 16 About the Avaya 1140E IP Deskphone About the Avaya 1140E IP Deskphone Your Avaya 1140E IP Deskphone brings voice and data to the desktop by connecting directly to a Local Area Network (LAN) through an Ethernet connection. In this guide, self-labeled line/programmable feature key labels appear beside the keys, and context-sensitive soft key labels appear directly above the keys. Figure 1 shows self-labeled line/programmable feature keys and context-sensitive soft keys. Figure 1: Self-labeled line/programmable feature keys and context-sensitive soft keys Basic features Your Avaya 1140E IP Deskphone supports the following features: • six self-labeled line/programmable feature keys with labels and indicators • four context-sensitive soft keys 17 About the Avaya 1140E IP Deskphone For information about context-sensitive soft keys, see Avaya Features and Services Fundamentals (NN43001-106). Note: Some Avaya 1140E IP Deskphone phones are not configured to support soft key functionality. Consult your system administrator. • graphical, high-resolution LCD display, backlit, with adjustable contrast • high-quality speaker phone • volume control keys for adjusting ringer, speaker, handset, and headset volume • six specialized feature keys: — Quit — Directory — Message/Inbox — Shift/Outbox — Services — Copy • six call-processing fixed keys: — Mute — Handsfree — Goodbye — Expand — Headset — Hold • gigabit Ethernet ports • built-in gigabit Ethernet switch for shared PC access • headset jack with an On/Off key • USB port to support a keyboard, mouse, wireless headset, or an audio device. The USB audio devices include the Avaya Enhanced USB Headset Adapter, the Avaya Mobile USB Headset Adapter, the Algo 4900 USB Analog Terminal Adapter (ATA), and wireless headsets from GN Netcom and Plantronics. Powered downstream 18 About the Avaya 1140E IP Deskphone 1.1-compliant USB hubs are supported, including USB 2.0 hubs, if they offer USB 1.1 backwards compliancy. • automatic network configuration • Graphical XAS • hearing aid compatibility • wireless headset support using a Bluetooth® 1.2 wireless technology compliant Audio Gateway (Headset Profile, Bluetooth Power Class 2). • Accessory Expansion Module port to connect the Avaya 1100 Series Expansion Module For information about using the Expansion Module, see the Avaya 1100 Series Expansion Module User Guide (NN43130-101). • supports wideband audio when the deskphone is equipped with a wideband-capable handset. You must supply your own widebandcapable handset. • supports wideband audio when the deskphone is equipped with a wide-band capable headset. You must supply your own widebandcapable headset. • supports wideband audio using the internal speakerphone • supports the ability to deliver text messages to the display and audio messages to the speaker (see “Using Hospitality features” on page 192) • supports the WML Browser (see “WML Browser support” on page 30) 19 About the Avaya 1140E IP Deskphone Telephone controls Figure 2 shows the Avaya 1140E IP Deskphone. Figure 2: Avaya 1140E IP Deskphone This section describes the controls on your Avaya 1140E IP Deskphone. In some geographic regions, the Avaya 1140E IP Deskphone is offered with key caps that have English text labels. In this document, text in parentheses indicates the labels that appear on the key caps, for example, (Services). 20 Context-sensitive soft keys are located below the display area. The LCD label above each key changes based on the active feature. About the Avaya 1140E IP Deskphone When a triangle appears before a soft key label, the feature is active. Press the More key to access the next layer of context-sensitive soft keys (self-labeled). The keys on either side of the LCD display area are self-labeled line/programmable feature keys, with labels on the LCD. These keys also function as line (DN) keys. A steady LCD light beside a line (DN) key indicates that the line is active. A flashing LCD light indicates the line is on hold or the feature is being programmed. (Volume +) (Volume -) A steady LCD light beside a feature key indicates that the feature is active. A flashing LCD light indicates that the feature is being programmed. Use the Volume control buttons to adjust the volume of the ringer, handset, headset, speaker, and the Handsfree feature. Press the top button to increase the volume, and press the bottom button to decrease the volume. 21 About the Avaya 1140E IP Deskphone (Mute) Your Mute key functionality is enabled or disabled by your system administrator. Contact your system administrator to determine if your Mute key is enabled. If your Mute key is enabled, press the Mute key to listen to the receiving party without transmitting. Press the Mute key again to return to two-way conversation. Note: If your Mute key is not enabled, pressing the Mute key places the call on hold. Press the Mute key again to restore the active call or press the line key to restore the active call. You cannot retrieve this call from hold by pressing the Hold key The Mute key applies to handsfree, handset, and headset microphones. The Mute LED indicator, located on the Mute key, flashes to indicate that the microphone is muted. Press the Handsfree key to activate handsfree. (Handsfree) 22 The Handsfree LED indicator, located on the Handsfree key, lights to indicate when handsfree is active. About the Avaya 1140E IP Deskphone Use the Navigation keys to scroll through menus and lists appearing on the LCD display screen. The outer part of this key cluster rocks for up, down, left, and right movements. Use Up and Down to scroll up and down in lists, and the Left and Right keys to position the cursor. In some dialog boxes that appear on your phone, you can also use the Left and Right keys to select editable fields; press the Right key to select the field below the current selection, or the Left key to select the one above. Use the Enter key, at the center of the Navigation key cluster, to confirm menu selections. In most menus, you can use the Enter key instead of the Select soft key. (Hold) Press the Hold key to put an active call on hold. Tap the flashing line (DN) soft key to return to the caller on hold. Use the Expand key to access external server applications (Expand) (Headset) Press the Headset key to answer a call using the headset or to switch a call from the handset or handsfree to the headset. The Headset LED indicator, located on the Headset key, lights to indicate that the headset is in use. 23 About the Avaya 1140E IP Deskphone (Headset) (Headset) (Goodbye) Press the Headset key twice to open the Bluetooth Setup menu. If Bluetooth wireless technology is not enabled on your phone, this menu is not available. Use the Goodbye key to terminate an active call. When a message is waiting, the red Visual Alerter/Message Waiting indicator lights. Also, when the ringer sounds, this indicator flashes. Note: You may also hear an audio Message Waiting Indicator (stutter or beeping dial tone) when you go off-hook. When your Avaya 1140E IP Deskphone firmware is being updated, the blue Feature Status Lamp indicator flashes. To find out if additional features are supported for this lamp, contact your administrator. 24 (Copy) Press the Copy Key to copy entries to your Personal Directory from other lists, such as the Caller List, Redial List, and Corporate Directory. (Quit) Press the Quit/Stop key to exit an active menu or dialog. Pressing the Quit/Stop key does not affect the status of active calls. About the Avaya 1140E IP Deskphone (Shift/Outbox) Press the Shift/Outbox key to toggle between two feature key pages and to access an additional six lines/features. This function is not available on all phones; consult your system administrator. (Msg/Inbox) Press the Message/Inbox key to access your voice mailbox. This function is not available on all phones; consult your system administrator. (Directory) Press the Directory key to access directory services. 25 About the Avaya 1140E IP Deskphone (Services) Press the Services key and use the navigation keys to access the following items: • Telephone Options: — — — — — — — — — — — — — — — Volume adjustment Contrast adjustment Language Date/Time Display diagnostics Local Dialpad Tone Set Info Diagnostics Call Log Options Ring type Call Timer On hook default path Change Feature Key Label Name Display Format Live Dialpad — Caller ID display order — Normal mode indication 26 About the Avaya 1140E IP Deskphone • Password Admin: — Station Control Password (Services) The Password Admin menu is not available on all Avaya 1140E IP Deskphone phones. Consult your system administrator. (continued) • Display Network Diagnostics Utilities Only your system administrator or service provider can use Display Network Diagnostics Utilities to perform Internet diagnostics. • Virtual Office Login and Virtual Office Logout (if Virtual Office is configured) • Test Local Mode and Resume Local Mode (if Media Gateway 1000B is configured) Press the Services key to exit from any menu or menu item. (Services) (Services) Press the Services key twice to access the Local Tools menu, and use the navigation keys to access the following items: • 1. Preferences • 2. Local Diagnostics • 3. Network Configuration • 4. Lock Menu If you attempt to access the Local Tools menu and a dialog box appears prompting you for a password, contact your system administrator. Your system administrator can establish a password for the Local Tools menu. 27 About the Avaya 1140E IP Deskphone Telephone display Your Avaya 1140E IP Deskphone has three display areas: • The upper display area provides labels for the six self-labeled line/ programmable feature key labels. • The middle display area contains single-line information for items such as caller number, caller name, Call Timer, feature prompt strings, user-entered digits, date and time information, and IP Deskphone information. • The lower display area provides labels for the four context-sensitive soft keys. Figure 3 shows an idle LCD screen. Figure 3: Avaya 1140E IP Deskphone LCD screen License Notification Notify your system administrator if your phone displays a message in a pop-up window about the licensing feature or evaluation period. License notification provides details to help diagnose why the features are disabled on the phone. You can press the Stop key or lift the handset to close the window. The window redisplays every 24 hours at 1:00 AM (default). The time and time frame can be configured when you provision 28 About the Avaya 1140E IP Deskphone the phone. For information about provisioning the IP Deskphones, see Avaya Communication Server 1000 IP Deskphones Fundamentals (NN43001-368). Call features and Flexible Feature Codes Some features are not available on all IP Deskphones. Call features and Flexible Feature Codes (FFC) must be assigned to your IP Deskphone and supported by system software. Contact your system administrator to configure these features and codes on your IP Deskphone. Audio and text message broadcast The Avaya 1140 IP Deskphone can display special messages in the display area of your telephone, and can play special audio messages through the speaker. Your administrator broadcasts these messages, which can be used to inform you of events like company news, meeting reminders, and weather bulletins. The message can be preceded by an audio alert (a series of beeps). The Avaya 1140 IP Deskphone supports the following special messages: • text: a single line of text displays. If the message is too long for the display, the message is truncated, you see an ellipsis and you cannot see the rest of the message. • display: content in the form of a WML web page is displayed on a WML browser on the IP deskphone • audio: an audio message streams to the telephone When an audio message starts, the Interrupt Screen displays. While the audio message plays, you can switch to your handset or headset to listen to the message. Depending on the priority of the message, the message can barge-in during an active telephone call, during an incoming call alert, or when another message is playing. You can also cancel the audio using the following methods: • if listening on the speaker, pressing the Handsfree key 29 About the Avaya 1140E IP Deskphone • if listening on the handset, placing the handset on hook • if listening on the headset, pressing the Headset key • by pressing the Cancel soft key • by pressing any Line or Feature key WML Browser support The Avaya 1140 IP Deskphone includes a WML Browser. This browser supports the display of WML pages containing text and images from your administrator. You can also use it in the same way as you would use a browser on a smartphone. One or more tones may precede content displayed in the WML Browser. There are two modes of content display: normal and barge. Normal display of content occurs if you are not actively using the phone; barge display of content occurs at any time. You configure your IP Deskphone to support the WML Browser, including configuring a WML home page. For more information, see “3. Network Configuration menu” on page 114. Your administrator may have already configured the browser for you. When you access a WML page (called a deck) using the browser, the pages (called a set of cards) download to your IP Deskphone. The browser handles navigation between the cards in the downloaded deck. After a card loads, it can cause a timer to be activated. When this timer expires, the action defined on the card occurs. When a card is active, but you have not done anything on the card for a configurable amount of time, an inactivity page can display, if configured. If you have a keyboard and mouse attached to your IP Deskphone, you can use the mouse and keyboard on the WML page. Use the mouse to navigate on the page, and to select or activate items. Use the keyboard to navigate and input text. 30 About the Avaya 1140E IP Deskphone The WML Browser supports basic HTTP authentication. If you connect to a WML page that requires authentication, the browser leads you through the authentication steps. When you are browsing, the following soft keys on your IP Deskphone can appear: • Home: Pressing this soft key causes the page defined in the WML Home field to display. • Refresh: Pressing this soft key causes the current page to reload, including a complete refresh of the deck. • Cancel: Pressing this soft key causes the active WML page request to be cancelled. The displayed WML page can have its own soft keys. These additional soft keys can span multiple levels, so you use the More soft key to display the next level of soft keys. The following table describes some of the typical conditions and the soft keys displayed. Table 1: WML softkey display Soft key Soft key Soft key Soft key Page loading, WML Home not configured Cancel (blank) (blank) (blank) Page loading, WML Home configured Home Cancel (blank) (blank) Page loaded, WML Home not configured Refresh (blank) (blank) (blank) Condition 31 About the Avaya 1140E IP Deskphone Table 1: WML softkey display Soft key Soft key Soft key Soft key Page Loaded, WML Home configured, no page-defined soft keys Home Refresh (blank) (blank) Page Loaded, WML Home configured, one page-defined soft keyHome Refresh (blank) Page Loaded, WML Home configured, two page-defined soft keys Home Refresh Page Loaded, WML Home configured, three page-defined soft keys More Home Refresh (blank) More Page Loaded, WML Home configured, four page-defined soft keys More Home Refresh More Condition 32 About the Avaya 1140E IP Deskphone Table 1: WML softkey display Condition Page Loaded, WML Home configured, five page-defined soft keys Soft key Soft key Soft key Soft key More Home More Refresh (blank) (blank) More Some web pages enable you to use Click to Dial from the browser. When a handset icon displays, the number shown beside the icon is the phone number that will be dialed when the icon is selected. Highlight the icon and select it to place a call; the web browser screen does not display during the call. Use the up and down arrow keys to highlight items on a page. The browser tracks a history of the pages displayed. When the history has items to display, you can see left and right arrows in the bottom right corner of the display; these arrows indicate the directions available for moving over the display. Activate an item using the Enter key or the Feature keys located on either side of the display. Note: The Access key feature allows you to select items using dialpad keys (such as pressing 1 for room service.) This function must be configured. 33 About the Avaya 1140E IP Deskphone Security features The following security features are available on your Avaya 1140E IP Deskphone: • Using encrypted calling • Managing your Station Control Password (SCPW) Using encrypted calling Your Avaya 1140E IP Deskphone supports secure communication using SRTP media encryption. If the feature is enabled, a security icon (q) appears on the screen when your call is secured using SRTP media encryption. Contact your system administrator to find out if this feature is available for your use. Managing your Station Control Password (SCPW) Your Station Control Password (SCPW) enables the following security features: • Electronic Lock to prevent others from making calls from your IP Deskphone • password-protected IP Deskphone features (for example, Personal Directory, Redial List, and Callers List) Your system administrator defines your initial SCPW. Contact your system administrator for detailed information. To change your SCPW: 1. Press the Services key. (Services) 2. Press the Up/Down keys to scroll and highlight Password Admin. 34 About the Avaya 1140E IP Deskphone 3. Press the Enter key. 4. Use the dialpad to enter your password at the prompt. 5. Press the Up/Down keys to scroll and highlight New Password. 6. Press the Enter key. 7. Use the dialpad to enter the new password. 8. Press the Select soft key to accept the new password. If you are locked out of your Avaya 1140E IP Deskphone, or if you forget your SCPW, contact your system administrator. Note: The default configuration for Password Protection is off. To turn Password Protection on or off: 1. Press the Directory key. (Directory) 35 About the Avaya 1140E IP Deskphone 2. Press the Up/Down navigation keys to scroll and highlight Change Protection Mode. 3. Use the dialpad to enter your password (if Password Protection is enabled). 4. Press the Enter soft key. 5. Press the Up/Down navigation keys to scroll and highlight one of the following: — Enable Password Protection — Disable Password Protection 6. Choose one of the following soft keys: or 36 — Yes to accept the selection — No to return to the Directory menu 7. Press the Done soft key. Entering and editing text Entering and editing text You can enter and edit text on your Avaya 1140E IP Deskphone using the following methods: • “Entering text using the IP Deskphone dial pad” on page 37 • “Entering text using the USB keyboard” on page 38 • “Editing text using the soft keys” on page 38 The use of any of these methods for text entry or editing depends on the application. Table 2 shows the applications and input devices that you can use for text entry. Table 2: Application text entry For: Use: Call Server-related applications (for example, changing feature key labels, adding personal directory entries, or dialing) Dialpad Graphical applications USB keyboard Local Tools menu USB keyboard USB keyboard for numeric entries only Dialpad for numeric entries Entering text using the IP Deskphone dial pad You can use the dialpad to enter text when you use features such as Personal Directory, Redial List, and Callers List. Use the dialpad in conjunction with the soft keys. For example, if you want to enter the letter A, press the number 2 key once. If you want to enter the letter C, press the number 2 key three times. No letters are associated with the number 1 or the 0 keys. 37 Entering and editing text Entering text using the USB keyboard You can use the USB keyboard, when connected, to enter text in the tools and graphical applications. For number entry in phone applications (for example, when dialing), you can use the keyboard to enter digits (0 to 9), as well as * and #. Other characters are ignored. When on a call, you can use the function keys (f1, f2, f3, f4, f5, f6, f7, and f8) to control the IP Deskphone. Table 3 shows the function keys and their associated action during IP Deskphone calls. Table 3: USB keyboard function keys during IP Deskphone calls Function key Action f1 Go to Handsfree mode f2 Go to Headset mode f3 Place the current call on hold f4 Mute the current call f5 Volume up f6 Volume down f7 Copy f8 Quit Editing text using the soft keys You can use soft keys to edit text when you use features such as Personal Directory, Redial List, and Callers List. Use the soft keys in conjunction with the dialpad. 38 Entering and editing text To edit an entry in your Personal Directory, press the Directory key, and select the desired entry from your Personal Directory. To edit text with the soft keys: 1. Press the Edit soft key. 2. Press the Left/Right navigation keys to move through the text. 3. Select the appropriate editing soft key for the operation you want to perform. 4. If the character you want is not visible, press the More soft key to access the next layer of soft keys. 5. To add non-alphanumeric symbols, press the Symbol soft key, and perform the following: a. Press the Up navigation key to access the symbols. b. Press the Left/Right navigation keys to move to a specific symbol. c. Press the Choose soft key to select a symbol. 6. Press the Next soft key to submit your changes. When you are editing text using the soft keys, various commands are available on the soft keys to help you, as described in Table 4. Table 4: Editing soft key description Soft key Description Cancel Cancel an action. Choose Select a non-alphanumeric symbol (available only after the Symbol soft key is selected). Clear Clear the input field. Case Switch the next character to either uppercase or lowercase. Delete Backspace one character. Done/Select/Enter Varies, depending on the state of your phone. More Access additional soft keys. 39 Connecting the components Connecting the components Figure 4 shows connections on the Avaya 1140E IP Deskphone. Figure 4: Avaya 1140E IP Deskphone connections WARNING Ensure that the protective rubber cap on the Accessory Expansion Module port is in place when the port is not in use. Connecting anything other than the proper Avaya 1100 Series Expansion Module connector to this port can cause damage to the IP Deskphone. 40 Connecting the components Before you begin CAUTION Damage to Equipment Do not plug your Avaya 1140E IP Deskphone into a regular phone jack. This results in severe damage to the IP Deskphone. Consult your system administrator to ensure that you plug your IP Deskphone into a 10/ 100BaseT Ethernet jack. CAUTION Your Avaya 1140E IP Deskphone is designed for use in an indoor environment only. Connecting the components of the phone WARNING Your Avaya 1140E IP Deskphone is shipped with the base locked in position. To avoid damaging your phone, press the wall-mount lever, located just under the Handsfree key as indicated in Figure 5 on page 42, to release the base and pull it away from the phone. 41 Connecting the components Figure 5: Release the Avaya 1140E IP Deskphone from the stand Use the following steps to connect the components of your phone. 1. Remove the stand cover. Pull upward on the center catch as indicated in Figure 6 on page 43, and remove the stand cover. The cable routing tracks are now accessible. 42 Connecting the components Figure 6: Remove the stand cover 2. Connect the global power supply (optional). Connect the global power supply to the AC adapter jack in the bottom of the phone. Form a small bend in the cable, and then thread the adapter cord through the channels in the stand. WARNING Use only the approved Avaya Global Power Supply with your 1140E IP Deskphone. Note 1: Your 1140E IP Deskphone supports AC power or Power over Ethernet (PoE) options, including IEEE 802.3af standard power. To use local AC power, use only the Avaya-approved Global Power Supply (NTYS17xxE6). To use PoE, where power is delivered over 43 Connecting the components the CAT5 cable, your connected LAN must support PoE. If you use PoE, you do not require an AC adapter. Note 2: You must use CAT5e (or later) cables if you want to use gigabit Ethernet. 3. Install the handset. Connect the end of the handset cable with the short straight section into the handset. Connect the end of the handset cable with the long straight section to the back of the phone, using the RJ-9 handset jack marked with the symbol +. Form a small bend in the cable, and then thread the handset cord through the channels in the stand so that it exits behind the handset on the right side, in the Handset cord exit in the stand base, as shown in Figure 7 on page 45. 4. Install the headset (optional). If you are installing a headset, plug the connector into the RJ-9 headset jack on the back of the phone marked with the symbol ), and thread the headset cord along with the handset cord through the channels in the stand, so that the headset cord exits the channel marked with the symbol ). 5. Install the Ethernet cable. Connect one end of the supplied Ethernet cable to the back of your phone using the RJ-45 connector marked with the symbol %, and thread the network cable through the channel marked with the symbol %. 6. If you are connecting your PC through the phone, you require a second CAT5e cable. Only one cable is included with the Avaya 1140E IP Deskphone package. Install the Ethernet cable connecting the PC to the phone (optional). Connect one end of the PC Ethernet cable to your phone using the RJ-45 connector marked with the symbol ( and thread it through the channel marked with the symbol (. Connect the other end to the LAN connector on the back of your PC. 7. Install additional cables. If applicable, plug in optional USB devices. Connect the Ethernet cable to the LAN Ethernet connection. If you are using a global power supply, plug the global power supply into an AC outlet. 44 Connecting the components Figure 7: Cable routing tracks and mounting holes 8. Wall-mount your phone (optional). Your Avaya 1140E IP Deskphone can be mounted either by: (Method A) using the mounting holes on the bottom of the phone stand, or (Method B) using a traditional-style wall-mount box with RJ-45 connector and 15-cm (6-inch) RJ-45 cord (not provided). Complete steps 1-7, as needed, before you wall-mount your phone: Method A: Press the wall-mount lever, and pull the phone away from the stand, as shown in Figure 5 on page 42. Using the stand cover (the part you removed in step 1), mark the wall-mount holes by pressing the bottom of the stand cover firmly against the wall in the location where you wish to install the phone. Four small pins on the bottom of the stand cover make marks on the wall. Use the marks as a guideline for installing the wall-mount screws (not provided). Install the screws so that they protrude 3 mm (1/8 inch) from the wall, and then install the phone stand mounting holes over the screw heads. You may need to remove the phone from the wall to adjust the lower screws. When the lower screws are snug, install the phone on the 45 Connecting the components mounting screws, and then tighten the top screws. See Figure 7 on page 45. Method B: Attach the 15-cm (6-inch) CAT5e cable, position the stand over the mounting rivets, and slide the phone down the wall so that the rivets fit into the slots on the stand, indicated in Figure 7 on page 45 (Method B). 9. Replace the stand cover. Ensure that all cables are neatly routed and press the stand cover into place until you hear a click. 10. Put the phone in the wall-mount position (optional). If you wallmounted your phone, put it in the wall-mount position by holding the Tilt Lever and pressing the phone towards the base until the phone is parallel with the base. Release the Tilt Lever and continue to push the phone towards the base until you hear an audible click. Ensure the phone is securely locked in position. Replacing your narrowband handset with a wideband handset In order to take advantage of wideband audio, you must replace the handset supplied with the deskphone with a wideband handset. 1. Obtain a wideband handset. 2. Unplug the handset supplied with the deskphone, leaving the handset cord attached to the phone. 3. Connect the handset cord to the wideband handset. Replacing your narrowband headset with a wideband headset In order to take advantage of wideband audio, you must replace the handset supplied with the deskphone with a wideband handset. 1. Obtain a wideband headset. 2. Unplug the handset supplied with the deskphone, leaving the headset cord attached to the phone. 3. Connect the headset cord to the wideband headset. 46 Connecting the components 47 Virtual Private Network Virtual Private Network A Virtual Private Network (VPN) is a network that uses a public network infrastructure, such as the Internet, to provide you with secure access to the private network of your organization. The IP Deskphone VPN feature allows you to connect to your organization’s private network from a public or remote network. For example, you can use your home public Internet connection to connect to your organization’s private network. This chapter describes the procedure to upgrade the software of your IP Deskphone (if required) and configure the VPN on your IP Deskphone. An installation wizard helps you perform the necessary steps. Note: The Avaya Phone VPN Configuration Wizard uses the default language of the operating system of your PC. If the language is not supported by the wizard, the default wizard language is English. Your system administrator provides you with all the necessary files you require to configure your IP Deskphone for VPN, and helps you to resolve any errors that occur during configuration. Before you begin Before you upgrade the IP Deskphone software and configure VPN on your IP Deskphone, complete the following checklist. • Ensure that your PC is using one of the following operating systems: — Windows XP — Windows Vista — Macintosh OS • Ensure that you received a copy of the provisioning files from your network administrator. The following files should be included: — Avaya Phone VPN Configuration Wizard.jar — provisioning files (for example: system.prv) 48 Virtual Private Network — .bin files (for example: 0625C7C.bin) • Java Virtual Machine (JVM) version 1.5 or later must be installed on your PC. Check Start, Settings, Control Panel, Java to see if JVM is installed on your machine and the version of it. If it is not installed, contact your system administration to help you to install it. To download the latest JVM, go to www.java.com. • Ensure that your PC has a firewall that allows incoming communication to the following ports: — UDP Port 69 (TFTP) — TCP Port 80 (HTTP) — UDP Port 49000 Note: The Avaya Phone VPN Configuration Wizard.jar file creates a log.txt file during execution. This file is helpful to troubleshoot problems you experience using the Avaya Phone VPN Configuration Wizard.jar. The log.txt file is located in the same directory as Avaya Phone VPN Configuration Wizard.jar. Connecting your IP Deskphone Before you connect your IP Deskphone to your PC, ensure that components of your phone are connected properly. For more information about connecting your IP Deskphone, see “Connecting the components” on page 40. Connect your IP Deskphone using one of the following methods: • connect to your modem. See Figure 8 on page 50. • connect to your router. See Figure 9 on page 50. • connect to your wireless access point and modem. See Figure 10 on page 51. 49 Virtual Private Network Figure 8: IP Deskphone connected to the modem Figure 9: IP Deskphone connected to the router 50 Virtual Private Network Figure 10: IP Deskphone connected to the wireless access point and modem Note: If your home network is not configured as described in the above figures, contact your system administrator for assistance. Note: You cannot connect multiple PCs directly to the PC port on the IP Deskphone. Note: The Avaya Phone VPN Configuration Wizard requires direct communication with the IP Deskphone on the network. Ensure that your network allows devices to communicate with each other on the local network. Some network equipment allows you to isolate devices from each other. If you are unsure, it is recommended that you temporarily connect your PC to the IP Deskphone to run the initial Avaya Phone VPN Configuration Wizard. See Figure 8 on page 50. QoS configuration recommendations Avaya recommends that you connect the PC to the IP Deskphones PC Ethernet Port as the IP Deskphone provides Quality of Service (QoS) on outbound traffic automatically. If other PCs share the internet connection then Avaya recommends that you configure QoS for outbound traffic and prioritize the IP Deskphone traffic. Typical QoS methods that are available are port based priority, MAC Address based Priority, and IP Address based Priority. To configure QoS, see your router documentation. 51 Virtual Private Network Installing and configuring VPN Use the following procedure to install and configure VPN on your IP Deskphone. Note: Depending on the version of software installed on your IP Deskphone you may need to upgrade the software on the IP Deskphone prior to configuring the VPN feature. To install and configure VPN 1. Follow the instructions provided by your system administrator to obtain the required files. 2. Power-down the IP Deskphone. 3. Run the Avaya Phone VPN Configuration Wizard.jar file. The Welcome & language selection window of the Wizard appears, as shown in Figure 11. Figure 11: Welcome & language selection window 52 Virtual Private Network 4. Select your language preference. The following languages are supported: • Arabic • Chinese - simplified • Chinese - traditional • Czech • Danish • Dutch • English • Finnish • French • German • Greek • Hebrew • Hungarian • Italian • Japanese - Katakana • Japanese - Kanji • Korean • Latvian • Norwegian • Polish • Portuguese • Russian • Spanish • Swedish • Turkish 5. Click Next. 53 Virtual Private Network The Equipment Setup and VPN window appears, as shown in Figure 12. Figure 12: Equipment Setup and VPN window 6. Verify that the modem, IP Deskphone, and PC are connected properly. 7. Disconnect any VPN connection currently running on your PC. See Figure 4 on page 40 to confirm that your LAN Ethernet Port and PC Ethernet Port on the IP Deskphone are connected correctly. Note: Connect the IP Deskphone LAN Ethernet port, marked with the % symbol on the back of the phone to your network equipment only. Connect only 1 PC (if applicable) to the PC Ethernet port, marked with the ( symbol on the back of the phone. Note: Optional: Click More to read a description of VPN. 8. Click Next. The Locate Data Files window appears, as shown in Figure 13 on page 55. 54 Virtual Private Network Figure 13: Locate Data Files window 9. Click Browse to locate the provisioning files provided by your system administrator, if the wizard was not able to locate the files. 10. Click Next. The Prepare Phone for Configuration window appears as shown in Figure 14 on page 56. 55 Virtual Private Network Figure 14: Prepare Phone for Configuration window 11. Power on your IP Deskphone. Note: Depending on the current software version on the IP Deskphone “Listening Mode” may not be detected. If your phone does not enter “Listening Mode”, follow the steps below. 12. After you hear the chimes tune and the text AVAYA appears on the IP Deskphone display screen, quickly press the following keys in order. Mute Mute 13. Verify that the IP Deskphone displays Listening Mode. Note: The IP Deskphone can take up to 60 seconds for “Listening Mode” to appear in the display area. If the IP Deskphone displays Listening Mode, click Yes and go to Step 15 on page 61. OR If the IP Deskphone does not display Listening Mode, click No. 56 Virtual Private Network The Prepare Phone for Configuration (Try again) window appears, as shown in Figure 15 on page 57. Figure 15: Prepare Phone for Configuration (Try again) window a. Power off your IP Deskphone and power it back on again. 14. After you hear the chimes tune and the text AVAYA appears on the IP Deskphone display screen, quickly press the following keys in order. Mute Mute Note: The IP Deskphone can take up to 60 seconds for “Listening Mode” to appear in the display area. b. If the IP Deskphone displays Listening Mode, click Yes and go to Step 15 on page 61. OR If the IP Deskphone does not display Listening Mode then your 57 Virtual Private Network IP Deskphone requires a software upgrade in order to proceed. Click No to proceed to a software upgrade. Follow the next steps to perform a software upgrade on your phone. The Prepare Phone for Configuration window appears as shown in Figure 16. Figure 16: Prepare Phone for Configuration window c. Double-press the Services key on the IP Deskphone quickly. Select the Network Configuration menu item. Move the cursor to locate Provision: or (TFTP IP:) in the Network Configuration menu, and then write down the existing address of the provisioning server so you can revert to it after you complete this procedure. Note: If a password prompt dialog box appears, press Cancel. Wait until your IP Deskphone display completes the “Starting DHCP…” screen then perform Step c again. For information about entering and editing text in the Local menu, see “Entering and editing text” on page 37. 58 Virtual Private Network d. If you are able to navigate to the Provision: or (TFTP IP:) parameter, and edit this field, click Yes. The Prepare Phone for Configuration (Input Provisioning Server IP address) window appears, as shown in Figure 18 on page 60. OR If you are not able to navigate and edit the address in Provision: or (TFTP IP:) in the Network Configuration menu or you were not able to edit this field, click No. The Prepare Phone for Configuration (Alternate Provisioning Server) window appears. See Figure 17. Figure 17: Prepare Phone for Configuration (Alternate Provisioning Server) window e. Press the Auto soft key on the IP Deskphone. Navigate to 12. Provisioning Server. Clear the Provisioning Server check box. f. Press the Config soft key on the IP Deskphone. Navigate to the Provision: item. Note: If you can locate the existing provisioning server address, write it down so you can revert to it after you complete this procedure, then 59 Virtual Private Network click Yes. Observe the Provision: or (TFTP IP) address, as shown in Figure 18 on page 60. This is the IP Address of your PC running the Wizard tool. Use the IP Deskphone keypad to enter the Provision: or (TFTP IP) address of the provisioning server. Note: To enter a dot (period) when entering an IP address using the IP Deskphone keypad, press the 1 key repeatedly or you can doublepress the asterisk (*) key. Figure 18: Prepare Phone for Configuration (Input Provisioning Server IP address) window OR If you cannot locate the Provisioning Server address, contact your system administrator to obtain the IP address and follow the administrator instructions. Click No to return to the Prepare Phone for Configuration window shown in Figure 16 on page 58. g. 60 To reset the IP Deskphone and begin the software update, press the Apply&Reset key on the IP Deskphone. Virtual Private Network The progress bar displays the percent complete of the software transfer. h. Restart your IP Deskphone. i. Click Next. j. Go back to Step 12 on page 56 and repeat the steps. 15. When the Autodiscover Phone window appears, as shown in Figure 19 on page 62, click Autodiscover Phone to discover connected IP Deskphones. Note: Click Stop to stop the search. The text “Searching for connected phones” displays while the connected IP Deskphones are located. The text “Autodiscovery complete” displays in the Avaya Phone VPN Configuration Wizard tool when the search is finished. If the search is successful, “Listening Mode: Connected” appears in the IP Deskphone display area. If the search is not successful, do the following • Ensure that the IP Deskphone continues to display “Listening Mode: Listening…” during the Autodiscovery process. If your IP Deskphone does display this message, power down the IP Deskphone and repeat the steps, starting with Step 11 on page 56. • Ensure that UDP Port 49000 is not currently blocked by your PC firewall. • Ensure that UDP Port 49000 is not already in use by existing applications on your PC. • Review the log.txt file for additional information. 61 Virtual Private Network Figure 19: Autodiscover Phone window 16. Click Next. If more than one connected IP Deskphone was discovered, the Autodiscover Phone (More than one phone was discovered) window appears. See Figure 20 on page 63. 62 Virtual Private Network Figure 20: Autodiscover Phone (more than one phone was discovered) window a. Obtain the MAC address of the IP Deskphone for which you are configuring the VPN. The MAC address is printed on a label located on the back of the IP Deskphone. b. Select the IP Deskphone to configure from the drop-down list. c. Click Next. 17. When the Configure phone window appears, as shown in Figure 21 on page 64, click Configure phone to initiate the provisioning session that configures the VPN feature on the IP Deskphone. 63 Virtual Private Network Figure 21: Configure phone window The progress bar displays the percent complete of the provisioning file transfer. Configuring phone is displayed during the file transfer. 18. When Phone configuration complete is displayed, click Next. The Confirmation & Finish window appears. See Figure 22 on page 65. 64 Virtual Private Network Figure 22: Confirmation & Finish window 19. Verify that the IP Deskphone is successfully configured. Note: You may be prompted to enter a User ID and Password before the IP Deskphone registers with the system. This information is provided by your system administrator. The following list provides character key mappings. Key Generates _-.!@$%&+& ^\1 abcABC2 defDEF3 ghiGHI4 jklJKL5 65 Virtual Private Network Key Generates mnoMNO6 pqrsPQRS7 RUVTUV8 wxyzWXYZ 9 ., - + = ^ ; : ‘ \ “ * {}|()<>[]# a. Look for the following information on the IP Deskphone display: — Date — Time — Type of call server — Directory number b. Lift the IP Deskphone handset and listen for a dial tone. If the IP Deskphone is not configured successfully, ensure that the basic requirements are met; repeat the steps in the Avaya Phone VPN Configuration Wizard or contact your system administrator. For more information about basic requirements, see “Before you begin” on page 48. 66 Configuring Telephone Options Configuring Telephone Options Your Avaya 1140E IP Deskphone Services menu lists the following submenus: • The Telephone Options menu enables you or your system administrator to configure IP Deskphone preferences. The Telephone Options menu offers the options shown in Figure 23. • The Password Admin menu enables you or your system administrator to change the Station Control Password (SCPW). • The Virtual Office Login and Test Local Mode (for branch office) menus are listed when an Avaya 1140E IP Deskphone Class of Service is configured for Virtual Office and branch office. (For more information, see “Using Virtual Office” on page 180). Note: The Password Admin, Virtual Office Login, and Test Local Mode menus are not available on all Avaya 1140E IP Deskphone phones. Consult your system administrator. Figure 23: Telephone Options menu Volume adjustment Call Log Options Contrast adjustment Ring type Language Call Timer Date/Time On hook default path Display diagnostics Change Feature Key Label Local Dialpad Tone Name Display Format Set Info Live Dialpad Diagnostics Note: When an option has a sublist, an ellipsis (...) appears after the option. 67 Configuring Telephone Options Using the Telephone Options menu Use the Telephone Options menu to access the following: • “Adjusting the volume” on page 69 • “Adjusting the display screen contrast” on page 70 • “Selecting a language” on page 71 • “Selecting date and time format” on page 72 • “Accessing display diagnostics” on page 73 • “Choosing a local dialpad tone” on page 73 • “Viewing IP Deskphone information” on page 74 • “Diagnostics” on page 75 • “Configuring call log options” on page 76 • “Choosing a ring type” on page 81 • “Enabling or disabling Call Timer” on page 82 • “Enabling OnHook Default Path” on page 82 • “Changing feature key labels” on page 83 • “Configuring the name display format” on page 85 • “Configuring Live Dialpad” on page 86 • “Configuring Caller ID display order” on page 87 • “Configuring Normal mode indication” on page 87 To use the Telephone Options menu: 1. Press the Services key. (Services) 2. Press the Up/Down navigation keys to scroll and highlight Telephone Options. 68 Configuring Telephone Options 3. Press the Enter key. 4. Press the Up/Down navigation keys to scroll and highlight an option (for example, Language…). 5. Press the Enter key. The display provides information required to adjust your selection. 6. Choose one of the following: — Press the Select soft key to save changes and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations. Adjusting the volume To adjust the volume, press the Services key and select Telephone Options, and select Volume adjustment… To adjust the volume: 1. Press the Up/Down navigation keys to scroll and highlight one of the following: — Ringer — Handset listen — Handsfree listen — Headset listen — Buzzer 69 Configuring Telephone Options 2. Press the Enter key. or 3. To increase or decrease the volume, do one of the following: — Press the Down and Up soft keys. or — Press the Up/Down navigation keys. 4. Choose one of the following: or — Press the Select soft key to save the volume level and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Adjusting the display screen contrast To adjust the LCD screen contrast, press the Services key, select Telephone Options, and select Contrast adjustment. You can also adjust the contrast using the Local Tools menu; Avaya recommends that you use the control in the Telephone Options menu. Note: If you have an Avaya 1100 Series Expansion Module attached to your IP Deskphone, adjusting the IP Deskphone LCD screen contrast also adjusts the display screen contrast configuration for the Avaya 1100 Series Expansion Module. 70 Configuring Telephone Options To adjust the display screen contrast: or 1. To increase or decrease the display contrast level, choose one of the following: — Press the Down and Up soft keys. or — Press the Up/Down navigation keys. 2. Choose one of the following: or — Press the Select soft key to save the changes and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Selecting a language The display is available in multiple languages. To choose a language, press the Services key, select Telephone Options, and select Language… This language setting controls the language used by features on your phone only. To set the language used elsewhere on your phone, press Services twice, select Preferences, and select Language. If the Language setting is password-protected, you must enter a password (SCPW) to change the language. If you enter an incorrect password, an error message is displayed. If you enter an incorrect password more than three times, the password functionality is locked. Contact your system administrator to unlock the password. 71 Configuring Telephone Options To select a language: 1. Press the Up/Down navigation keys to scroll and highlight the desired language (for example, German [Deutsche]). Note: Some languages may not be installed on your IP Deskphone. Contact your system administrator for more information about available languages. 2. Choose one of the following: or — Press the Select soft key to save the desired language and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Selecting date and time format Several date and time formats are available. Formats are based on the 12-hour and 24-hour clocks. To select the date and time format, press the Services key, select Telephone Options, and select Date/Time… To select a date and time format: 1. Press the Up/Down navigation keys to scroll and highlight the desired format. Sample formats appear on the upperright side of the display area. 72 Configuring Telephone Options 2. Choose one of the following: — Press the Select soft key to save the format and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations. Accessing display diagnostics The Display diagnostics option tests the IP Deskphone display screen and indicator lights.To access Display diagnostics, press the Services key, select Telephone Options, and select Display diagnostics. To use Display diagnostics: 1. Press the Up/Down navigation keys to scroll through the list to view display capabilities. 2. Press the Cancel soft key to return to the Telephone Options menu. Choosing a local dialpad tone The Local DialPad Tone option produces Dual-Tone Multi-Frequency (DTMF) sounds, a single tone, or no sound when you press a key on the dialpad. To choose a local dialpad tone, press the Services key, select Telephone Options, and select Local DialPad Tone. 73 Configuring Telephone Options To choose a local dialpad tone: 1. Press the Up/Down navigation keys to scroll and highlight one of the following dialpad tones: — None to disable all tones — Short Click to enable a single tone for all keys — DTMF to turn on a separate DTMF tone for each key 2. Choose one of the following: or — Press the Select soft key to save the tone selection and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Viewing IP Deskphone information The Set Info option displays the following phone-specific information: • General Info • Set IP Info • Ethernet Info • Server Info • Encryption Info To view IP Deskphone information, press the Services key, select Telephone Options, and select Set Info. 74 Configuring Telephone Options To view IP Deskphone information: 1. Press the Up/Down navigation keys to scroll through the list to view IP Deskphone information. 2. Press the Cancel soft key to return to the Telephone Options menu. Diagnostics The Diagnostics option displays the following phone-specific information: • Diag Tools (Ping, do Route Traces) • EtherStats (Speed, Auto Neg, CRC Errors, Collision) • IP Stats (Packet Info) • RUDP Stats (Message receive or transmit) • QOS Stats To view diagnostic information, press the Services key, select Telephone Options, and select Diagnostics. To view diagnostic information: 1. Press the Up/Down navigation keys to scroll through the list of diagnostic information. 2. Press the Cancel soft key to return to the Telephone Options menu. 75 Configuring Telephone Options Configuring call log options Use the call log option to configure the following preferences: • “Configuring the Callers List log” on page 76 • “Configuring New Call Indication” on page 77 • “Configuring Preferred Name Match” on page 78 • “Configuring Area Code Setup” on page 79 Configuring the Callers List log You can configure the Callers List to log all incoming calls including calls while your IP Deskphone is busy, or only unanswered calls. The default setting is Log all calls. To log only unanswered calls, press the Services soft key, select Telephone Options, and select Call Log Options from the menu. To log only unanswered calls: 1. Press the Up/Down navigation keys to scroll and highlight the Log Mode option. 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight Log unanswered calls. 4. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. 76 Configuring Telephone Options To log all incoming calls including calls while IP Deskphone is busy: To log all incoming calls including calls while your IP Deskphone is busy, press the Services key and select Call Log Options from the Telephone Options menu. 1. Press the Up/Down navigation keys to scroll and highlight the Incoming Calls option. 2. Press the Select soft key. 3. Press the Up/Down navigation keys to scroll and highlight Log calls if busy. 4. Choose one of the following: — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring New Call Indication You can configure your Avaya 1140E IP Deskphone to display a message to indicate that a new incoming call was received. The default configuration is On. To configure new call indication, press the Services key, select Telephone Options, and select Call Log Option. To configure New Call Indication: 1. Press the Up/Down navigation keys to scroll and highlight the Log Mode option. 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight New Call Indication. 4. Press the Enter key. 77 Configuring Telephone Options 5. Press the Up/Down navigation keys to scroll and highlight one of the following: — New call indication off — New call indication on 6. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring Preferred Name Match You can configure your Avaya 1140E IP Deskphone to display the name of the caller as defined in your Personal Directory. The default configuration is Off. To configure Preferred Name Match, press the Services key, select Telephone Options, and select Call Log Option. To configure Preferred Name Match: 1. Press the Up/Down navigation keys to scroll and highlight Preferred Name Match. 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — Preferred name match on — Preferred name match off 78 Configuring Telephone Options 4. Choose one of the following: — Press the Select soft key to save the configuration. or — Press the Cancel soft key to keep existing configurations. Configuring Area Code Setup Use the Area Code Setup menu to save up to three area codes. When an incoming call arrives with an area code that matches one of the three stored area codes, the incoming call number is reordered to display the phone number followed by the area code (as opposed to the area code followed by the phone number). This reordering is also performed when you scroll through your Callers List. To configure area codes, press the Services key, select Telephone Options, and select Call Log Option. To configure default area codes (maximum of three): 1. Press the Up/Down navigation keys to scroll and highlight Area Code Setup. 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — Area Code # 1 — Area Code # 2 — Area Code # 3 4. Press the Enter key. 79 Configuring Telephone Options 5. Use the dialpad to enter the number at the prompt. 6. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep the existing configurations. To edit area code display: 1. Press the Up/Down navigation keys to scroll and highlight Area Code Setup. 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — Area Code # 1 — Area Code # 2 — Area Code # 3 4. Press the Enter key. 5. Use the dialpad to edit the number. 80 Configuring Telephone Options 6. Choose one of the following: — Press the Select soft key to save the configuration. or — Press the Cancel soft key to keep existing configurations. Choosing a ring type The Ring type… option configures the IP Deskphone ring tone. To choose a ring type, press the Services key, select Telephone Options, and select Ring type… To select a ring type: 1. Press the Up/Down navigation keys to scroll and highlight one of the ring types. 2. Press the Play soft key to sample the ring tone. 3. Choose one of the following: — Press the Select soft key to save the ring type and return to the Telephone Options menu. — Press the Stop soft key and use the Up/Down navigation keys to select a different ring type. — Press the Cancel soft key to keep existing configurations. 81 Configuring Telephone Options Enabling or disabling Call Timer The call timer measures how long you are on each call. To enable Call Timer, press the Services key, select Telephone Options, and select Call Timer. To enable or disable Call Timer: 1. Choose one of the following: or — To turn on the call timer, press the On soft key. — To turn off the call timer, press the Off soft key. 2. Choose one of the following: or — Press the Select soft key to save the configuration and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Enabling OnHook Default Path The OnHook Default Path option allows you to choose whether to use a headset or the Handsfree feature to operate your IP Deskphone while it is on-hook.To enable OnHook Default Path, press the Services key, select Telephone Options, and select OnHook Default Path. To enable OnHook Default Path: 1. Press the Up/Down navigation keys to highlight one of the following: — Handsfree enable — Headset enable 82 Configuring Telephone Options 2. Choose one of the following: or — Press the Select soft key to save the default path and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Changing feature key labels The Change feature key label option renames the label displayed next to each feature key or restores the default labels to the keys (collectively or individually). To rename feature key labels, press the Services key, select Telephone Options, and select Change feature key labels. Note: If a feature key is configured as an auto-dial key, the label does not change if the auto-dial key configuration changes. If the feature key label setting is password-protected, you must enter a password (SCPW) to change the feature key label. If you enter an incorrect password, an error message is displayed. If you enter an incorrect password more than three times, the password functionality is locked. Contact your system administrator to unlock the password. To rename the labels: 1. Press the Enter key. 2. Press the feature key that you are changing. If you press a prime DN key, an error message appears. 83 Configuring Telephone Options 3. Enter the new information for the feature key label. To enter special characters, press the Up navigation key. For information about entering text, refer to “Entering text using the IP Deskphone dial pad” on page 37. 4. Choose one of the following: — Press the Select soft key to save the changes and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations. To restore the default labels: To restore feature key labels, press the Services key, select Telephone Options, and select Change feature key labels. 5. Press the Enter key. 84 Configuring Telephone Options 6. Use the Up/Down navigation keys to scroll and highlight one of the following: a. Restore all key labels — Press the Yes soft key to change all feature keys to default values. b. Restore one key label — Press the Select soft key. — Press the feature key. — Press the Yes soft key to change the selected feature key label to the default value. Note: If labels are changed to default values, you cannot undo the change. The label configurations must be reentered. Configuring the name display format You can configure your Avaya 1140E IP Deskphone to display the name of the incoming calling party in the following formats: • first name, last name • last name, first name To configure name display format, press the Services key, select Telephone Options, and select Name Display Format. To configure name display format: 1. Press the Up/Down navigation keys to scroll and highlight Name display format. 85 Configuring Telephone Options 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — first name, last name — last name, first name 4. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring Live Dialpad The Live Dialpad option activates the Primary DN key when you make a call by dialing a directory number on the dialpad without picking up the handset or pressing the handsfree key. To configure Live Dialpad, press the Services key, select Telephone Options, and select Live Dialpad. To configure Live Dialpad: 1. Press the Up/Down navigation keys to scroll and highlight Live Dialpad. 2. Press the Enter key. 86 Configuring Telephone Options 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — On — Off (default) 4. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring Caller ID display order Caller ID display order appears in 2 formats: • Number, name (default) • Name, Number Use the following procedure to configure Caller ID display order. 1. Press the Services key, select Telephone Options and select Caller ID display order. 2. Press the Up/Down navigation keys to scroll and select one of the following: — Number, name (default) — Name, number 3. Press the Select soft key to save the configuration, else press the Cancel key to cancel the modifications. Configuring Normal mode indication The Normal mode display indication can be On or Off when the IP Deskphone is in normal mode. Use the following procedure to configure Normal mode indication. 87 Configuring Telephone Options 1. Press the Services key, select Telephone Options, and select Normal mode indication. 2. Press the Up/Down navigation keys to scroll and select one of the following: — On — Off 3. Press the Select soft key to save the configuration, else press the Cancel key to cancel the modifications. 88 Configuring Local Menu options Configuring Local Menu options Note: Many of the options discussed in this section are for administrator use only. Do not make any changes unless instructed by an administrator. Your system administrator can establish a password for the Local Tools menu. When the password is enabled, a password prompt dialog box appears when you attempt to access this menu. If this happens, contact your system administrator. Your Avaya 1140E IP Deskphone has both local and server-based options. Press the Services key twice to access the Local Tools menu, which is organized into the following submenus: • “1. Preferences submenu” on page 91 • “2. Local Diagnostics submenu” on page 112 • “3. Network Configuration menu” on page 114 • “4. Lock Menu” on page 116 If a menu entry has a number in front of it, you can select that entry by pressing the associated key on the dialpad. For example, in the Local Tools menu, you can access 2. Local Diagnostics by pressing the 2 key on the dialpad. The function of some keys on the IP Deskphone varies depending on the situation. The key functions in the menus are described in Table 5. Table 5: Navigation key functions in menus (Part 1 of 2) Key Function Down arrow keys Move the highlight down Up arrow keys Move the highlight up Right arrow key Select the current menu item Left arrow key Close the menu Enter key Select the current menu item 89 Configuring Local Menu options Table 5: Navigation key functions in menus (Part 2 of 2) Key Function Enter digits on the dialpad Select the associated menu item Stop soft key Close the menu The key functions in dialog boxes are described in Table 6. Table 6: Navigation key functions in dialog boxes Key Function Down arrow keys Scroll the window down Up arrow keys Scroll the window up Right arrow key Go to the next Edit item Left arrow key Go to the previous Edit item Enter key Toggle Edit mode on or off Toggle the check box status If you are working in Edit mode, the first field of the item is highlighted and a blinking cursor is to the right of the current edit position. The navigation key functions in Edit mode are described in Table 7. Table 7: Navigation key functions in Edit mode (Part 1 of 2) Key Function Down arrow keys Open the list Move the highlight down the list Up arrow keys Move the highlight up list Right arrow key Select the current list item Move the cursor to the right Left arrow key Delete a character in the edit field 90 Configuring Local Menu options Table 7: Navigation key functions in Edit mode (Part 2 of 2) Key Function Enter key Select the highlighted item in the Exit edit mode box Enter characters or digits on the dialpad Insert characters or digits at the current cursor position If you are using a USB mouse, you can right-click on the Telephony screen to open the Local Tools menu, and click on an item to select it. 1. Preferences submenu The Local Tools menu 1. Preferences submenu offers the following choices: • “Changing 1. Display Settings” on page 91 • “Changing 2. Language” on page 92 • “Changing 3. Headsets” on page 93 • “Configuring 4. Bluetooth” on page 100 Changing 1. Display Settings The Display Settings menu provides access to two tools: Contrast and Sleep. Use the Contrast tool to alter the physical settings of the display. Use the Sleep tool to control how long the display remains lit if the phone is inactive. Note: Changes you make to contrast in this menu are lost if the phone is reset. To avoid losing your changes, Avaya recommends that you use the Contrast Adjustment control in the Telephone Options menu. To adjust Contrast or Sleep settings, press the Services key twice to open the Local Tools menu, press the 1 key on the dialpad to select 1. Preferences, and press the 1 key on the dialpad to select 1. Display Settings. 91 Configuring Local Menu options To adjust Contrast or Sleep settings: 1. Press the Up/Down arrow keys to scroll and highlight one of the following: — Contrast — Sleep Sleep appears in the format xxx, where xxx is a time in minutes or hours. 2. Press the Enter key. 3. Press the Up/Down arrow keys to increase or decrease the selected value. Available values for Sleep are as follows: 5m (5 minutes) 15m (15 minutes) 30m (30 minutes) 1h (1 hour — default) 2h (2 hours) Never (screen does not go black) Note: Extending the sleep time, or setting it to Never, reduces the life span of the display screen. 4. Press the Exit soft key to exit to the main display. Changes are saved automatically. Changing 2. Language Use the Preferences menu item to configure local preferences. Use the Language tool to select the language used on your phone. 92 Configuring Local Menu options Note: This language setting controls the language used in the local menus on your phone only. To select the language used by features on your phone, press the Services key, select Telephone Options, and select Language… To select the language used in the local menus, press the Services key twice to open the Local Tools menu, press the 1 key on the dialpad to select 1. Preferences, and press the 2 key on the dialpad to select 2. Language. To select the language used in local menus: 1. Press the Up/Down navigation keys to scroll and highlight the desired language (for example, German [Deutsche]). 2. Choose one of the following: — Press the Select soft key to save the desired language and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations. 3. Press the Exit soft key to exit to the main display. Changes are saved automatically. Changing 3. Headsets Headset Configuration In order to use your headset, you must configure your deskphone to recognize the headset. For information on how to configure your deskphone to use the wideband headset, see “Configuring 3. Headsets” on page 91. 93 Configuring Local Menu options Each headset has its own tuning parameters, and your deskphone must be configured to use the proper parameters. If you do not configure the deskphone for the proper tuning parameters, you may not be taking full advantage of the audio qualities of the headset. Selecting Active Headset Device To select the Active Headset Device, press the Enter key. Press the Up/ Down navigation keys to select the desired headset. To select the active headset device 1. Press the Up/Down navigation keys to scroll and highlight the Headsets menu. 2. Choose one of the following: or — Press the Apply soft key to save the desired headset and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Note: You can select a headset regardless of its connection status. It does not have to be physically connected to the Avaya 1140E IP Deskphone. 3. Press the Cancel soft key to exit to the main display. Changes are saved automatically. Enabling HID Commands To enable HID Commands, press the Right/Left navigation key to open the Local Tools menu, press the 1 key on the dialpad to select 1. Preferences, and press the 3 key on the dialpad to select 3.Headsets. 94 Configuring Local Menu options To enable HID Commands: 1. Press the Up/Down navigation keys to scroll and highlight the Headsets menu. 2. Select the Enable HID Commands checkbox. 3. Choose one of the following: or — Press the Apply soft key to save the desired selection and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. 4. Press the Cancel soft key to exit to the main display. Changes are saved automatically. Enabling USB Headset The wireless USB headset support included in UNIStim firmware release 3.1 for IP Deskphones is the Jabra GN9330E USB4 and the Plantronics CS50-USB and CS60-USB. The Plantronics CS50-USB utilizes 900MHz wireless technology whereas the Plantronics CS60- USB and Jabra GN9330E USB utilize 1.9Mz DECT wireless technology. These wireless headsets provide wireless freedom typically in the range of 60 meters or 200 feet. The actual distance allowed, before acceptable audio quality is threatened, is dependant on the operating environment. Included in the support of the Jabra and Plantronics headsets is compliance to GN Netcom’s and Plantronic’s USB Human Interface Device (HID) respectively. Compliance to their HID allows the phone to recognize call controlling features from the headset including off-hook (call answer/call initiate), on-hook (call release), mute, and volume control. 95 Configuring Local Menu options To enable USB headset 1. Select the Headset option in the Preferences menu of the Avaya 1120E IP Deskphone, Avaya 1140E IP Deskphone, and Avaya 1150E IP Deskphone. See the following Figure. Making a change in the Headset menu page will take affect immediately, but only temporarily depending on what further action is taken. 2. Press the Apply button to make the changes permanent. 3. Press Cancel button to discard any changes. 96 Configuring Local Menu options 4. Select the appropriate headset type in the Active Headset Device field from a list of Wired, USB, or Bluetooth as depicted in the following figure. 5. Select the Enable HID Commands check box to provide full HID for supported headsets. 6. Select the Headset type from the following list of headsets. • DuraPlus-B (GN Netcom DuraPlus Binaural Headset) • DuraPlus-M (GN Netcom DuraPlus Monaural Headset) • GN2020 (GN Netcom GN2020 NC Monaural Headset) • GN2100 (GN Netcom GN2100 Monaural Headset) • GN2115 (GN Netcom GN2115 ST Binaural Headset) • GN2117 (GN Netcom GN2117 ST Monaural Headset) • GN2125 (GN Netcom GN2125 NC Binaural Headset) • GN2220 (GN Netcom GN2220 NC Monaural Headset) • GN2225 (GN Netcom GN2225 NC Binaural Headset) • Avaya Handset You can select the headset type and configure as the active headset device regardless of whether the headset is connected or not. 97 Configuring Local Menu options Note: You can select the Headset Type only for the Avaya USB Headset Adapters. If the Avaya USB Headset Adapter is not detected, the Headset Type selection is disabled and cannot be modified. 7. Select the Back Light check box to control the backlight on the Avaya USB Headset Adapters. This check box is selected by default. Note: If the Avaya USB Headset Adapter is not detected this item is disabled and cannot be modified. Limitations and Advisories • USB headsets consume power from the USB port in order to operate. The USB port on the IP Deskphone imposes a limit of only 100mA. The limit of 100mA is sufficient to power the Avaya USB Adapters but is not sufficient to power the wireless headsets from GN Netcom an Plantronics. Also 100mA is not sufficient to power the Algo 4900 USB ATA. • USB Audio support does not include stereo audio. • Changes have occurred regarding the provisioning of Bluetooth on the Avaya 1140E IP Deskphone and 1150E. With UNIStim 3.1, the Bluetooth setup page no longer provides the option to select 98 Configuring Local Menu options Bluetooth headset since this choice has been moved to the Headset menu. • Users of USB Audio on an Avaya 1120E IP Deskphone or Avaya 1140E IP Deskphone when connected to a BCM system may experience constant beeping from the wireless headsets if the user inadvertently hits a call control keys in error. • For the Avaya USB Adapters it is a requirement that the firmware of this device be V2.0.32 or later. • For the Algo 4900 USB ATA it is a requirement that the firmware of this device be v1.00.32 or later. • The Algo 4900 USB ATA is classified as a high power USB device and must be connected to the phone through a powered USB hub. • The Plantronics CS50-USB and CS60-USB must be AC powered prior to connecting them to phone. • For the Plantronics CS50-USB and CS60-USB please make sure the headset base is in ready mode (i.e. the green LED on the right hand side of the headset cradle is solid) before using the headset. • For the Plantronics CS50-USB and CS60-USB the On Hook/Off Hook button must be depressed for 3 seconds to go off hook. • At the time of this writing, GN Netcom produces four models of the Jabra GN9300 series headsets: Jabra GN9330, Jabra GN 9330E, Jabra GN 9350 and Jabra GN9350E. The USB Audio feature in the IP Deskphones only supports the Jabra GN9330E and Jabra GN9350E connected via USB. • For the GN Netcom 9300 series occasionally a single ring is lost between the phone and the headset but is recovered at the next ring. • For the GN Netcom 9300 series occasionally a drop in audio quality may be experienced when a 3-way conference is established. Avaya Mobile Headset Adapter properties You can use the Avaya Mobile Headset Adapter to answer calls whenever the Avaya 1140E IP Deskphone is running. To access the Avaya Mobile Headset Adapter (MHA) properties, press the Services key twice to open the Local Tools menu, press the 1 key on 99 Configuring Local Menu options the dialpad to select 1. Preferences, and press the 3 key on the dialpad to select 3.Headsets. Note: The Headset type and Backlight options are only available when MHA is attached. Table 7 describes the features of the Avaya Mobile Headset Adapter. Table 8: Avaya Mobile Headset Adaptor elements and functions Key Function Answer key Press to answer an incoming call. If there is no incoming call, the Avaya 1140E IP Deskphone selects a line and you hear a dial tone. This is also referred to as Off-hook. Release/Goodbye key This is also referred to as Onhook. Mute key Press the Mute key to listen to the receiving party without transmitting. Press the Mute key again to return to two-way conversation. Volume key Use the Volume buttons to increase or decrease the volume of the headset. Backlight The backlight illuminates when you connect your headset to the Avaya 1140E IP Deskphone. Configuring 4. Bluetooth Your Avaya 1140E IP Deskphone is equipped with a radio system to support Bluetooth wireless technology enabled headsets. Double press 100 Configuring Local Menu options the Headset key to open the Bluetooth Setup dialog box. You must be familiar with the operation of the navigation keys to work in the Bluetooth Setup dialog box; see the Navigation keys description on page 23. The Bluetooth Setup menu entry is not available on all phones. If the Bluetooth Setup menu entry appears dimmed, or fails to open when you double press the Headset key, the feature is not enabled on your phone. Before you can use a wireless headset with your phone, the feature must be enabled by the system administrator. Contact your administrator to find out if Bluetooth wireless technology functionality is available for your use. Note: Avaya recommends that you not pair more than one headset of the same model, because they have identical names in the Paired list. To pair a wireless headset with your phone: (Headset) 1. Double-press the Headset key to open the Bluetooth Setup dialog box. The Enable Bluetooth check box is highlighted. If the Bluetooth Setup menu fails to open when you double press the Headset key, Bluetooth wireless technology feature is not enabled on your phone. Contact your administrator. 2. Press the Enter key to activate Bluetooth wireless technology. A check mark is displayed on the Enable Bluetooth item to indicate that the Bluetooth wireless technology is activated. The message “Bluetooth Enabled” appears at the bottom of the display. 101 Configuring Local Menu options 3. Put your Bluetooth technology headset in its pairing or search mode. The procedure for doing this can be different for each headset. Refer to the documentation that accompanied your headset, or contact the vendor. 102 Configuring Local Menu options 4. Search devices. a. Ensure that your headset is in Pairing or Search Mode. b. Press the Right navigation key twice, and highlight the Search button, displayed next to the Search Devices item. c. Press the Enter key. The message "Searching…." appears. It can take up to two minutes for the search to complete. If the search is successful, the message "Search Completed Found Device(s)" appears, and a list of devices that support Bluetooth wireless technology appears in the Found: list. d. Choose one of the following: — If the search is successful, proceed to step Step 5 on page 104. — If the search is not successful, the message "Search completed. No device found" appears. If this happens, or if the headset times out and exits search/pairing mode, power off the headset, and repeat steps Step 3 on page 102 and Step 4 on page 103. If pairing is still unsuccessful, pair the phone to another wireless headset, or contact the headset vendor. 103 Configuring Local Menu options 5. When the name of your headset appears in the Found: box, press the Stop soft key or wait for the search to finish. When the search is complete, the message "Search Completed Found Device(s)" appears. 6. Choose one of the following: • If the name of your headset appears in the Found: box, proceed to step Step 7 on page 105. • If your headset is not displayed in the Found: box, select your headset from the list, as follows: a. Press the Right navigation key one or more times to highlight the Found: box. Press the Enter key to start the edit mode. b. Press the Down navigation key to open the Found: list. Press the Up/ Down navigation keys to scroll and highlight your headset. c. 104 Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode. Configuring Local Menu options 7. Press the Right navigation key one or more times to highlight the Pair button (next to the Pair Device item) and press the Enter key. a. A dialog box appears, with the prompt "Enter PIN#". b. Use the phone dialpad to enter the PIN for the wireless headset and press the Enter key. Check your headset documentation to find its PIN (sometimes called a passkey). Typically this value is 0000. 105 Configuring Local Menu options 8. Choose one of the following: • If the headset is successfully paired with your phone, proceed to step Step 9 on page 107. To verify that the pairing was successful, ensure that the headset appears in the list next to the Paired: item. If pairing is successful, the message "Pair completed" also appears at the bottom of the screen. • If the headset is not successfully paired with your phone, an error message appears at the bottom of the screen. If an error message appears: — Confirm that the wireless headset is still in search/pair mode. — If the headset timed out and exited search/pairing mode, put the headset in pairing mode, as discussed in step Step 3 on page 102, and repeat step Step 7 on page 105. — Check that you are using the correct PIN and repeat step Step 7 on page 105. 106 Configuring Local Menu options 9. Choose one of the following: • If the name of your headset appears in the Paired: box, proceed to step Step 10 on page 108. • If more than one device is paired, and the one you wish to use is not shown in the Paired: box, navigate to the one you want, as follows: a. Press the Right navigation key one or more times to highlight the Paired: box. Press the Enter key to start the edit mode. b. Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key to scroll in the Paired: list and highlight your headset. c. Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode. 107 Configuring Local Menu options 10. Choose one of the following: • If only one headset is paired, proceed to step Step 11 on page 108. • If more than one wireless headset is paired, the first headset paired is automatically made the active device. To make a different headset active, do the following. — Press the Right navigation key one or more times to highlight the Set button (next to the Set Active Device item). — Press the Enter soft key. The message "Set active: “device name” appears. This means the headset named is now the active headset and is used when you press the headset key. 11. Press the Exit soft key to exit to the main display. Changes are saved automatically. Dual Pairing Headsets Take special care when using a "dual pairing" type of Bluetooth wireless technology headset, which can be paired to its base as well as to the 1140E. If it is paired to both, the 1140E is the second device, and the following applies: Press the headset "telephone" key: • If a single tone sounds, the headset is connected to the base. • If a double beep sounds, the headset is connected to the 1140E. If the base is powered off, the headset is only paired to the 1140E and pressing the "telephone" key connects you to the 1140E. 108 Configuring Local Menu options Note: Unless you need to dual pair a headset, operating the headset with the 1140E is simpler if the headset is only used with its chargingonly base. The desktop IP Deskphone base should be powered off if it is not in use. Interaction with wired headsets If you connect a Bluetooth wireless technology headset and a wired headset to the same Avaya 1140E IP Deskphone, the “Use Bluetooth headset” item switches between the wired headset and the Bluetooth headset. If you select the “Use Bluetooth Headset” check box, the Bluetooth headset provides the audio. If you clear the “Use Bluetooth Headset” check box, the wired headset provides the audio. The Bluetooth wireless technology headset can work only if it is within range of the phone; as the wireless headset approaches the edge of its radio range, the audio quality degrades and radio interference noise increases. When the wireless headset is in connecting range, the Headset key controls the wireless headset, even if a wired headset is attached. If a wireless headset moves out of connecting range, a special beep sounds in the headset indicating the connection was lost. When you do not want to use your Bluetooth technology headset If a Bluetooth wireless technology headset is connected, and you want to use the wired headset, you can switch between the two. It is not necessary to unpair or disable the wireless headset. You can switch between a wired and wireless headset and back again either when the phone is idle or during an active call. To switch between a wired headset and a wireless headset: (Headset) 1. Double-press the Headset key to open the Bluetooth Setup dialog. 2. Press the Left/Right navigation key to select the “Use BT Headset” item. 109 Configuring Local Menu options 3. Press the Enter key to toggle this option on or off. A check mark indicates that the wireless headset is used. Clear the check mark to use a wired headset. This option is on (o) by default. To unpair a wireless headset: (Headset) 1. Double-press the Headset key to open the Bluetooth Setup dialog box. 2. Press the Right navigation key to select the Paired: item. 110 Configuring Local Menu options 3. Choose one of the following: • If the name of your headset appears in the Paired box, proceed to step Step 5 on page 111. • If more than one device is paired, and your headset is not already displayed in the Paired box, do the following: a. Press the Right navigation key one or more times to highlight the Paired: box. Press the Enter key to open edit mode. b. Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key to scroll in the list and highlight your headset. c. Press the Enter key to select the headset and close the box. Press the Enter key to exit edit mode. 4. Press the Right navigation key one or more times to highlight the UnPair button (next to the UnPair Device item). 5. Press the Enter key. Your Bluetooth wireless technology headset is unpaired and removed from the Paired: item list. Your Bluetooth wireless technology headset is no longer paired with your phone, and the wired headset can be used. To use the wireless headset again, you must perform the pairing and activation procedure. 111 Configuring Local Menu options 2. Local Diagnostics submenu The Local Tools menu 2. Local Diagnostics submenu offers the following choices: • “1. IP Set Information” on page 112 • “2. Network Diagnostic Tools” on page 112 • “3. Ethernet Statistics” on page 112 • “4. IP Network Statistics” on page 113 • “5. USB Devices” on page 113 • “6. Advanced Diag Tools” on page 113 • “7. License Information” on page 113 • “8. VPN Information” on page 113 • “9. Certificate Information” on page 114 • “10. DHCP Information” on page 114 Press the Return soft key at any time while working with tools in the Local Diagnostics submenu to return to the Local Diagnostics submenu. Use the Return key in this way to quickly gather information and run tests without exiting and reentering the Local Tools menu. For example, you can check the Ethernet Statistics, then press Return and enter the Network Diagnostics Tools to ping an IP address. 1. IP Set Information The Network Configuration tool is used to view reports about IP set operation. This tool is for administrator use only. 2. Network Diagnostic Tools The Network Diagnostic Tools menu contains tools that are used to diagnose network problems. This menu is for administrator use only. 3. Ethernet Statistics The Ethernet Statistics tool is used to view reports about Ethernet operation. This tool is for administrator use only. 112 Configuring Local Menu options 4. IP Network Statistics The IP Networks Statistics tool is used to view reports about network operation. This tool is for administrator use only. 5. USB Devices The USB Devices tool provides information about any Universal Serial Bus (USB) devices that you connect to your phone. Your Avaya 1140E IP Deskphone automatically detects USB devices when you connect them to the USB port in the back of the IP Deskphone. To check USB device information, press the Services key twice to open the Local Tools menu, press the 2 key on the dialpad to select 2. Local Diagnostics, and press the 5 key on the dialpad to select 5. USB Devices. To check USB device information: The screen displays information about connected devices. 1. Press the Return soft key to return to the main display. 6. Advanced Diag Tools The Advanced Diag Tools are available to the Avaya support organization to configure the auto recovery function and remote access. This tool is for system administrator use only. 7. License Information You can use License Information menu to view license information. This menu is for administrator use only. 8. VPN Information The system administrator can use the VPN Information menu to view VPN information. This menu is for system administrator use only. 113 Configuring Local Menu options 9. Certificate Information The system administrator can use the Certificate Information menu to view certificate information. This menu is for system administrator use only. 10. DHCP Information The system administrator can use the DHCP Information menu to view license information. This menu is for system administrator use only. 3. Network Configuration menu The Network Configuration tool displays information that was configured when the IP Deskphone was installed. This tool is for administrator use only. You may need to access this menu to configure specific IP address information to meet the requirements of your network. To configure a set for a static IP address: 1. Press the Services key twice. 2. Enter the Admin password. 3. Select Network Configuration. 4. Scroll down to DHCP and ensure it is unchecked. 5. Enter the IP address in the Set IP field. 6. Enter the Net Mask in the Net Mask field. 7. Enter the Gateway in the Gateway field. 8. Enter DNS IPs (if applicable). 9. Press Apply. The phone reboots. To obtain an IP Address via DHCP: 1. Press the Services key twice. 2. Enter the Admin password. 3. Select Network Configuration. 114 Configuring Local Menu options 4. Scroll down to DHCP and ensure it is checked. 5. Press Apply. The phone reboots. To configure the WML Browser: You will need information from your administrator in order to configure the browser. Your administrator may have already configured this information for you. 1. Press the Services key twice. 2. Enter the Admin password. 3. Select Network Configuration. 4. Scroll down to the WML Browser section. 5. If a proxy is required for the WML Browser, in the Proxy field, enter the WML proxy server IP address or DNS name. For example, www.avaya.com 6. If a proxy is required for the WML Browser, in the Port field, enter the proxy server port to connect to. 7. In the Exceptions field, enter any domains that you might need to access that should bypass the proxy server. 8. (optional) In the Home field, enter the URL of the page you want to open as your home page. Note: Entering a value will enable manual activation of the WML Browser. If Home is defined, you can press the Expand key and display the Home page; if Home is not defined, the WML Browser can only be activated by a display message. 9. In the Idle URI field, enter the Uniform Resource Indicator (URI) of the page you want to display after a period of inactivity. Note: If Idle URL is defined, the idle page will be displayed when the phone is inactive for the configured time of the Idle TIme field. 10. (optional) In the Idle Time field, enter the number of minutes of inactivity that will trigger display of the Idle URI page. If the Idle Time is not configured, the inactivity timer is disabled. 11. Press Apply. The phone reboots. 115 Configuring Local Menu options 4. Lock Menu Your system administrator can use the lock menu tool to protect the Local Tools menu items from accidental or unwanted changes. This tool is for administrator use only. 116 Making a call Making a call This section describes features associated with making a call. You can make a call from your Avaya 1140E IP Deskphone using any of the following: • “Using Off-hook dialing” on page 117 • “Using On-hook dialing” on page 118 • “Using handsfree dialing” on page 119 • “Using the Directory applications” on page 121 • “Using Predial” on page 124 • “Using AutoDial” on page 125 • “Using Ring Again” on page 127 • “Using Last Number Redial” on page 128 • “Using Speed Call” on page 128 • “Using System Speed Call” on page 130 • “Using HotLine” on page 130 • “Using intercom calling” on page 130 Using Off-hook dialing Use these steps to make a call by lifting the handset before dialing: 1. Lift the handset. 2. Dial the number. 117 Making a call 3. To terminate the call, choose one of the following: or — Return the handset to the cradle. — Press the Goodbye key. (Goodbye) Using On-hook dialing Use these steps to make a call by dialing before lifting the handset: 1. Leave the handset in the cradle. 2. Press the line (DN) key. 3. When the dial tone sounds, dial the number. 4. When the called party answers, lift the handset. 5. To terminate the call, choose one of the following: or — Replace the handset into the cradle. — Press the Goodbye key. (Goodbye) 118 Making a call Using handsfree dialing Use handsfree dialing to use a built-in microphone and speaker, or a headset, instead of the handset. While on an active call, you can switch between handset and handsfree mode. 1. Choose one of the following: — Press the Handsfree key. or — If a headset is connected, press the Headset key. 2. Dial the number. To discontinue a handsfree call: Press the Goodbye key. (Goodbye) To mute a handsfree call: (Mute) (Mute) 1. Press the Mute key. The LED indicator flashes. 2. Press the Mute key again to return to a two-way handsfree conversation. 119 Making a call To switch from handsfree to handset mode: Lift the handset. To switch from handset mode to handsfree mode: 1. Press the Handsfree key. 2. Replace the handset. To use a headset: 1. Connect the headset to the headset jack or the handset jack. 2. Press the Headset key. If you have a Bluetooth wireless technology headset installed, you can activate it by pressing the button on the headset. To release a call: (Goodbye) 120 1. Press the phone Goodbye key or press the button on the wireless headset, if equipped. Making a call To switch from handsfree to headset: 1. Press the Headset key. Using the Directory applications You can make calls using the following Directory applications available on your Avaya 1140E IP Deskphone. • “Making a call using the Corporate Directory” on page 121 • “Making a call using the Personal Directory” on page 122 • “Making a call using the Callers List” on page 123 • “Making a call using the Redial List” on page 124 Making a call using the Corporate Directory This feature is not available on all phones. Contact your system administrator to find out if this feature is available for your use. The Corporate Directory feature provides an alphabetical list of entries using last names. You can search by name, view additional information on each entry, and dial Corporate Directory numbers. To use the Corporate Directory, press the Directory key and select Corporate Directory. To search for a specific number: 1. When prompted, use the dialpad to enter the desired name in the last name, first name format. 121 Making a call 2. Press the Search soft key to find the desired name. If the search is successful, the first match appears on the screen. 3. Choose one of the following: — Press the Dial soft key to dial the resulting number. — If there is no match to the search query, start a new search or change the information in the initial search. — Press the Cancel soft key to exit without dialing. To scroll to a specific number: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Corporate Directory. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. Making a call using the Personal Directory The Personal Directory feature allows you to store a maximum of 100 entries consisting of names and numbers. To use the Personal Directory, press the Directory key and select Personal Directory. For more information on how to configure and use the Personal Directory, refer to “Using the Personal Directory” on page 173. 122 Making a call To make a call using the Personal Directory: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Personal Directory. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. Making a call using the Callers List The Callers List feature automatically stores up to a maximum of 100 callers. After 100 callers have been stored, each additional caller overwrites the oldest entry. To use the Callers List, press the Directory key and select Callers List. For information on how to configure and use the Callers List, refer to “Using the Callers List” on page 176. To make a call using the Callers List: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Callers List. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. 123 Making a call Making a call using the Redial List The Redial List feature automatically stores a maximum of 20 previously dialed phone numbers. To use the Redial List, press the Directory key and select Redial List. For information on how to configure and use the Redial List, refer to “Using the Redial List” on page 178. To make a call using the Redial List: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Redial List. Note: If the caller name is not defined, then only the telephone number is displayed. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. Using Predial Use the Predial feature to enter, preview, and edit numbers before dialing. To use Predial: 1. Without selecting the line key, enter the number to be dialed. 124 2. Press a line key to dial the number. Making a call 3. Lift the Handset when the called party answers or, if in handsfree mode, begin to speak. To edit a Predial number: 1. Use the dialpad to enter the number. 2. Choose one of the following: — To erase all numbers, press the Clear soft key. Reenter the numbers to be dialed. or — To change one number at a time, press the Delete soft key to backspace. Re-enter the number. 3. Press a line key to dial the number. Using AutoDial Use the AutoDial feature to display, store, and automatically dial phone numbers. To store an AutoDial number: 1. Without lifting the handset, press the appropriate AutoDial key. The screen displays the word Autodial next to the appropriate key. 125 Making a call 2. Using the dialpad, dial the phone number (including access code) to be stored on the selected AutoDial key. 3. Press the AutoDial key a second time to store the number on the selected key. After you store a number, the word Autodial disappears, and the stored number appears. 4. Assign a label to the key. After you assign the label, the number disappears and only the label appears on the screen next to the key. To display an AutoDial number: 1. Press the Display key. 2. Press an AutoDial key in the upper display area to display the number associated with that key. To use AutoDial: 1. Lift the handset. 126 2. Press an AutoDial key in the upper display area to dial the number associated with that key. Making a call Using Ring Again Use the Ring Again feature if you receive a busy tone, or if there is no answer. Your IP Deskphone rings when the person you called becomes available. Ring Again automatically redials the number. To activate Ring Again: 1. Dial a number and receive a busy tone or no answer. or 2. Choose one of the following: — Press the Ring Again soft key. — Enter the Ring Again Activate FFC. To call a Ring Again party when you receive notification: 1. After receiving the notification ring, lift the handset, or, if you are using the headset or in handsfree mode, go to step 2. 2. Press the Ring Again soft key to automatically dial the number. 127 Making a call To deactivate Ring Again before notification: or Choose one of the following: • Press the Ring Again soft key a second time. • Press the Ring Again Deactivate FFC. Using Last Number Redial Use the Last Number Redial feature to automatically redial the last dialed number. To use Last Number Redial: Choose one of the following: — To redial using the handset: a. Lift the handset. b. Press the line (DN) key. or — To redial without lifting the handset, press the line (DN) key twice (the last number dialed is automatically redialed). Using Speed Call Use the Speed Call feature to place internal and external calls by dialing a one-, two-, or three-digit code to store, edit, and automatically dial frequently called phone numbers. 128 Making a call To store a Speed Call number: 1. Press the Speed Call Controller soft key. The triangular icon flashes, indicating programming mode. 2. At the prompt: — Enter a one-, two-, or three-digit code (0-999). — If required, dial the access code. — Enter the phone number (internal, external, or long-distance number). 3. Press the Speed Call Controller soft key again to save the code and number. The flashing icon turns off. To make a Speed Call: 1. Lift the handset. 2. Press the Speed Call Controller soft key. 3. Dial the Speed Call code to automatically dial the number. 129 Making a call Using System Speed Call Use the System Speed Call feature to dial Speed Call codes that override dialing restrictions placed on your IP Deskphone. To make a System Speed Call: 1. Lift the handset. 2. Choose one of the following: or — Press the System Speed Call soft key. — Press the System Speed Call Controller (SScCtl) soft key. 3. Dial the Speed Call code to automatically dial the number. Using HotLine Use the Hot Line feature to automatically dial a specific number. To use HotLine: Press the HotLine soft key to automatically dial the number. Using intercom calling Use the Intercom feature to call a member of your intercom group by pressing the code assigned to each member. 130 Making a call To make an intercom call: 1. Lift the handset. 2. Press the Intercom key. 3. Dial the one- or two-digit code for the desired intercom group member. To answer an intercom call while on a line other than your intercom group line: 1. Choose one of the following keys: (Hold) or (Goodbye) — Press the Hold key to put the current call on hold. — Press the Goodbye key to end the call. 2. Press the Intercom key and begin to speak. 131 Answering a call Answering a call Each incoming call causes the IP Deskphone to ring, the LCD indicator (R) beside the line (DN) key to flash, and the Message Indicator lamp to flash. To answer a call: Choose one of the following four options: • Lift the handset. • Press the Handsfree button located on the left side of the handset. • Press the line (DN) key beside the LCD indicator as it flashes. • Press the Headset key if a headset is connected to your IP Deskphone. or or or 132 While on an active call While on an active call You can use the following features during an active call: • “Placing a call on hold” on page 133 • “Transferring a call” on page 134 • “Using Timed Reminder Recall” on page 135 • “Using Attendant Recall” on page 136 • “Using Call Park” on page 136 • “Recording a Calling Party Number” on page 139 • “Displaying incoming calls” on page 139 • “Tracing a malicious call” on page 140 Placing a call on hold Use the Hold feature when you are talking on one line and another call arrives on a second line. To retain the original call, put it on hold and then answer the second call. To place a call on hold: Press the Hold key. The LCD indicator flashes beside the line on hold. (Hold) Note: If Automatic Hold is enabled, the active call is automatically put on hold when you answer the second call. To retrieve a call on hold: Press the line (DN) key beside the flashing LCD indicator. 133 While on an active call Transferring a call Use the Transfer feature to redirect a call to the appropriate person. To transfer a call to a third party: 1. Press the Transfer soft key. The other party is put on hold and a dial tone sounds. The LCD indicator light flashes steadily. 2. Dial the DN number to which you are transferring the call or use the Personal Directory, Redial List, or Callers List to select a number to dial. 3. When that number rings or a person answers, press the Transfer soft key to connect the calling party. To return to the original call if the transfer is incomplete: If the person called is not available, press the line (DN) key (next to the LCD indicator) to reconnect to the original call. 134 While on an active call Using Timed Reminder Recall Use the Timed Reminder Recall feature to receive a reminder tone when a transferred call is not answered. To use Timed Reminder Recall: 1. Press the Transfer soft key. The call is put on hold. 2. Dial the number to which you are transferring the call. or 3. Choose one of the following to start the recall timer: — Press the Transfer soft key. — Replace the handset before the extension answers. If the transfer is complete, the recall timer stops. If the transferred call is not answered, your IP Deskphone rings: 1. Lift the handset to reconnect to the original caller. 135 While on an active call or (Goodbye) 2. Choose one of the following: — Press the Transfer soft key and repeat the transfer. — If the transfer is picked up while you are on the line, press the Goodbye key to complete the transfer. Using Attendant Recall Use the Attendant Recall feature to contact an attendant during a call and to connect the caller to the attendant. To contact the attendant while on a call: (Goodbye) 1. Press the Attendant Recall key and stay on the line until the attendant answers. 2. Press the Goodbye key. The caller remains connected to the attendant. Using Call Park Use the Call Park feature to hold temporarily (park) and retrieve a call from any IP Deskphone. Using Call Park does not tie up a line. When configured network-wide, Call Park can be used across networks. A System Park extension can be configured to automatically park most calls. 136 While on an active call To park a call on the System Park DN or your own DN: During an active call, press the Park soft key twice. The call is parked on your DN unless a System Park DN is enabled to automatically park calls on the system. To park a call on a DN other than the System Park DN or your own DN: 1. Press the Park soft key. 2. Dial the DN where you want to park the call. 3. Press the Park soft key. To park a call using the SPRE code or FFC: 1. Choose one of the following: or — Press the Transfer soft key. — Press the Conference soft key. 2. Dial the Call Park FFC. 137 While on an active call 3. To use an alternate DN from the System Park DN or your own DN, dial the DN where you want to park the call. Otherwise, proceed to step 4. 4. Choose one of the following: or — Press the Transfer soft key. — Press the Conference soft key. To retrieve a parked call: 1. Lift the handset. 2. Press the Park soft key. 3. Dial the DN where you parked the call. If a parked call is not retrieved within a specified period of time, it rings back to your IP Deskphone or to the attendant. 138 While on an active call Recording a Calling Party Number Use the Calling Party Number feature to record a caller number, or to charge a call to an account number, during an established call. To record a caller number for accounting purposes: 1. Press the Call Party soft key. The caller is placed on hold. 2. Dial a charge account number or the caller number. Note: For information on using the Charge soft key, see “Charging a call or charging a forced call” on page 163. 3. Press the Call Party soft key to return to the call. Displaying incoming calls Use the Display feature to display a second incoming caller number and name (if available) during an active call, without interfering with the call in progress. To view the information on an incoming call while on a call in progress: 1. Press the Display key. 139 While on an active call 2. Press the flashing line (DN) key. The call waiting information appears. If you are using another feature key, you can use the Display key to access information associated with those feature keys. Tracing a malicious call Use the Call Trace feature to trace nuisance calls within your system. This feature is not enabled on all Avaya 1140E IP Deskphones. Contact your system administrator to configure this feature on your IP Deskphone. To use Call Trace while on a call: Press the Call Trace key. To use Call Trace without a Call Trace key: 1. Choose one of the following: or — Press the Transfer soft key. — Press the Conference soft key. 2. Dial the SPRE code followed by 83 or dial the Call Trace FFC to automatically reconnect. 140 Incoming calls Incoming calls You can use the following features when you have an incoming call: • “Using Automatic Answerback” on page 141 • “Using Call Pickup” on page 141 • “Using Call Waiting” on page 143 Using Automatic Answerback When the Automatic Answerback feature is active, your IP Deskphone automatically answers in Handsfree mode after one ring; however, calls are not forwarded to the voice message service. To activate Automatic Answerback: Press the Automatic Answerback key. To deactivate Automatic Answerback: Z Press the Automatic Answerback key again. Using Call Pickup Use the Call Pickup feature to pick up calls from any IP Deskphone in your pickup group or another pickup group. To answer a call in your own call pickup group: 1. Lift the handset. 141 Incoming calls or 2. Choose one of the following: — Press the Pickup key. — Enter the Pickup Ringing Number FFC. To answer an incoming call in another call pickup group: 1. Lift the handset. 2. Choose one of the following: — Press the Group Pickup soft key. — Enter the Pickup Group FFC. 3. Dial the pickup group number of the ringing IP Deskphone. To answer a call at a specific extension in any pickup group: 1. Lift the handset. or 2. Choose one of the following: — Press the DN Pickup key. — Enter the Pickup Directory Number FFC. 142 Incoming calls 3. Dial the DN of the IP Deskphone that is ringing (and that is not in your call pickup group). If the pickup DN or group number is invalid (an overflow burst tone sounds and the screen displays Goodbye and try again), press the Goodbye key. Using Call Waiting The Call Waiting feature alerts you to an incoming call by producing a tone. It also puts the current call on hold while you answer the new call. To answer an incoming call while on another call: (Hold) 1. When the incoming call tone sounds, press the Hold key to put a current call on hold. If Automatic Hold is enabled, you do not need to press the Hold key. Z 2. Press the Call Waiting key. To return to the first IP Deskphone call: 1. Choose one of the following: (Hold) or (Goodbye) — Press the Hold key to put the second call on hold. — Press the Goodbye key to end the second call. 143 Incoming calls 2. Press the line (DN) key associated with the first call. If you do not have a Call Waiting key: (Goodbye) 1. Press the Goodbye key to end the current call. 2. Press the line (DN) key beside the flashing status icon to answer the incoming call. 144 While away from your desk While away from your desk You can use the following features when you are away from your desk: • “Using Call Forward” on page 145 • “Using Internal Call Forward” on page 147 • “Using Remote Call Forward” on page 148 • “Securing your IP Deskphone” on page 150 Using Call Forward Use the Call Forward feature to direct incoming calls to ring on another line (DN). If the IP Deskphone is in the process of ringing, the call cannot be forwarded. To forward your calls or change the forward number: 1. Choose one of the following: — Press the Forward soft key. or — Lift the handset and enter the Call Forward All Calls Activate FFC. 2. Dial the DN where you want to forward your calls. 3. Press the Forward soft key. To see the number to which calls are being forwarded, press the Forward soft key. A message box with the target number is displayed, as seen in Figure 24 on page 146. 145 While away from your desk Figure 24: Call Forward display Press OK to return to the idle screen or press Cancel to cancel Call Forwarding. To deactivate Call Forward: Choose one of the following: • or Press the Forward soft key and press the Cancel soft key. OR • 146 Lift the handset and enter the Call Forward All Calls Deactivate FFC. While away from your desk To reinstate Call Forward to the same number: Press the Forward soft key twice. Using Internal Call Forward Use Internal Call Forward to accept only calls originating at internal DNs to ring at another DN. Calls originating outside your IP Deskphone system still ring at your IP Deskphone. Current incoming calls cannot be forwarded. To forward internal calls: or 1. Choose one of the following: — Press the Internal Call Forward key. — Lift the handset and enter the Internal Call Forward Activate FFC. 2. Dial the DN to which you are forwarding your internal calls. 3. Press the Internal Call Forward key. To see the number to which calls are being forwarded, press the Forward soft key. A message box with the target number is displayed. Press OK to return to the idle screen or press Cancel to cancel Call Forwarding. 147 While away from your desk To deactivate Internal Call Forward: Choose one of the following: Z or — Press the Internal Call Forward key and press the Cancel soft key. — Lift the handset and enter the Internal Call Forward Deactivate FFC. To reinstate Call Forward to the same number: Press the Internal Call Forward key twice. Using Remote Call Forward Use the Remote Call Forward feature (from any IP Deskphone other than your own) to forward calls to any IP Deskphone. To activate Remote Call Forward: 1. Lift the handset. 2. If you are calling from an IP Deskphone outside the system, dial your direct system access number and wait for the dial tone. 3. Dial the Remote Call Forward Activate FFC to activate the feature. 148 While away from your desk 4. Dial your Station Control Password. A dial tone sounds. 5. Choose one of the following: — Dial your DN. or — To forward calls to the previous call forward phone number, press the # key. (Do not perform steps 6 and 7.) 6. Dial the number to which you are forwarding calls. If calls are forwarded to an invalid number, a fast busy signal sounds. 7. Press the # key. To deactivate Remote Call Forward: 1. Lift the handset. 2. If you are calling from an IP Deskphone outside the system, dial the direct system access number and wait for the dial tone. 3. Dial the Remote Call Forward Deactivate FFC. 149 While away from your desk 4. Dial your Station Control Password. 5. After you hear the dial tone, dial your DN. 6. Press the # key. Securing your IP Deskphone Use the Electronic Lock feature to prevent others from making calls from your IP Deskphone. The Electronic Lock feature is controlled using your Station Control Password (SCPW). To change your Station Control Password, refer to “Security features” on page 34. To lock your IP Deskphone: 1. Lift the handset. 2. Dial the Electronic Lock Activate FFC. 3. Dial your Station Control Password. 150 While away from your desk 4. Choose one of the following: — If dialing locally, press the Goodbye key. (Goodbye) or — If dialing the FCC remotely, dial your DN. To unlock your IP Deskphone: 1. Lift the handset. 2. Dial the Electronic Lock Deactivate FFC. 3. Dial your Station Control Password. 4. Choose one of the following: (Goodbye) or — If dialing locally, press the Goodbye key. — If dialing the FCC remotely, dial your DN. 151 Talking with more than one person Talking with more than one person Use the following features to enable conversations between more than two people: • “Using the Call Join feature” on page 152 • “Setting up a conference call” on page 152 • “Using Conferee Selectable Display” on page 154 • “Using Group Call” on page 155 Using the Call Join feature Use the Call Join feature to connect a call to a current active call. This connection creates a conference between the two callers and yourself. To connect a call on hold (on a different line) to your current call: 1. Press the Conference soft key. 2. Press the line key that has the number of the caller you want to connect to your current call. 3. Press the Conference soft key to join the person on hold to your conversation. Setting up a conference call Use the Conference feature to set up a conference call for a maximum of three or six people, including yourself. The maximum number of people 152 Talking with more than one person the conference feature supports depends on the configuration of your IP Deskphone. To set up a conference call: 1. While on a call, press the Conference soft key to place the party on hold. You hear a dial tone. 2. Dial the number of the person you want to add to the conference call. You can talk privately to the person you are adding at this time. Note: Instead of dialing a number, you can press the Directory key, and use the Corporate Directory or Personal Directory, Redial List, and Callers List to find and dial the number of the person you want to add to the conference call. 3. Press the Conference soft key a second time to conference all parties together. Note: You can talk to either party privately, press the Incalls key to talk to the originator or press the Conf key to talk to the transfer number. Alternating between these two keys alternates between the two parties. This needs to be done before pressing the Conf key twice.This also assumes AHA CLS Automatic Hold, is enabled on the handset. 153 Talking with more than one person If the person you attempt to add to the conference is unavailable: 1. Press the Goodbye key. (Goodbye) 2. Press the line (DN) key beside the flashing status icon to return to your original call. Using Conferee Selectable Display Use the Conferee Selectable Display feature to list active conferees and disconnect a conferee from the conference call. To view active conferees: 1. While on a conference call, press the Conferee Selectable Display key to turn on the LCD indicator. Each key press changes the screen to show a different active conferee. This action has no effect on the display of other IP Deskphones involved in the conference. (Goodbye) 154 2. Press the Goodbye key. If configured, the Conference Count Display returns an updated total count of conferees. The LCD indicator turns off. Talking with more than one person To disconnect a conferee: 1. While on a conference call, press the Conferee Selectable Display key until the conferee you want to disconnect appears on the screen. 2. Press the DN key on which the conference call is established. 3. Choose one of the following: (Goodbye) — For a single conferee, press the Goodbye key. If configured, the Conference Count Display returns an updated total count of conferees. The LCD indicator turns off. — For multiple conferees, repeat steps 1 and 2 until all conferees are disconnected. Then press the Goodbye key. Using Group Call Use the Group Call feature to automatically call members of a predefined group, one at a time, until all members answer. To call group members: 1. Lift the handset. 155 Talking with more than one person 2. Press the Group Call key or enter the Group Call FFC. — The feature automatically calls all group members. The icon flashes until all members answer. — The phone numbers of the group members appear on the display as they answer. When the last person answers, the Group Call indicator lights steadily. — When a person in your group is on a conference call or another group call, they are not connected to your group call. — After everyone in the group has answered, only the person who made the group call can put the call on hold. To answer a group call: 1. Lift the handset. Note the following about notification tones: — If you are on a call and receive three 10-second tones, this is the notification of a group call on your current extension. — If you are on a call on another line when a group call is made, you receive a long tone through the handset or speaker. — If you are already on a conference call or another group call, you do not receive notification of a group call. 156 Talking with more than one person To end a group call: Press the Goodbye key. (Goodbye) Note: When the person who made the group call disconnects, the call terminates for all members of the group. However, the members of the group call can disconnect from the call and not affect other members on the call. 157 Working without interruption Working without interruption This section describes features that provide uninterrupted work time. Using Make Set Busy Use the Make Set Busy feature to make your IP Deskphone appear busy to all callers. To activate Make Set Busy: Choose one of the following: — Press the Make Set Busy key. or — Lift the handset and enter the Make Set Busy Activate FFC. To deactivate Make Set Busy: Z or Choose one of the following: — Press the Make Set Busy key a second time to deactivate the feature. — Lift the handset and enter the Make Set Busy Deactivate FFC. Call Deflect If Call Deflect is configured on your IP Deskphone, you can press the Deflect feature key to deflect your call if your IP Deskphone rings and you do not want to answer the call. The call may be forwarded to your voice mail or to another telephone number, depending on your system 158 Working without interruption configuration. Contact your system administrator to learn which treatment is configured for your IP Deskphone. Figure 25: Deflect feature key If you press the Deflect key and no special call treatment has been configured, your caller receives a busy signal. 159 Additional call features Additional call features Contact your system administrator to determine if the following call features are available on your IP Deskphone. • “Using AutoDial Transfer” on page 160 • “Using the Buzz signal” on page 161 • “Using Call Page Connect to make an announcement” on page 161 • “Using Centrex/Exchange Line Switchhook Flash” on page 162 • “Charging a call or charging a forced call” on page 163 • “Using Enhanced Override” on page 166 • “Using Forced Camp-on feature” on page 167 • “Overriding a busy signal” on page 168 • “Using Privacy Release” on page 169 • “Using Radio Page” on page 169 • “Using Voice Call” on page 172 Using AutoDial Transfer Use the AutoDial Transfer feature to transmit digits through your AutoDial key to the Central Office after a Trunk Switchhook Flash. You must be on a Central Office/Exchange (CO) trunk call from or to a CO that offers Centrex or exchange line-type features. To use AutoDial Transfer when picking up an incoming trunk call: 160 1. Press the Centrex Switchhook Line Flash key and wait for an interrupted dial tone. 2. Press the AutoDial key to call the number desired. Additional call features 3. Press the Goodbye key to end the call. (Goodbye) Using the Buzz signal Use the Buzz feature to notify another person of a call, a visitor, or a request. Two IP Deskphones that are linked together enable one person to signal the other. The person signaled hears a buzz. To buzz the IP Deskphone linked to your IP Deskphone: Press the Buzz key.The IP Deskphone linked to your IP Deskphone buzzes as long as you press the key. Using Call Page Connect to make an announcement Use the Call Page Connect feature to make an announcement over a paging system. Note: A Page key on an attendant console overrides and disconnects the IP Deskphones. The IP Deskphones must reaccess the page trunk. To connect to Call Page: 1. Lift the handset. 161 Additional call features 2. Dial the Page Trunk Access Code to complete the connection to the page system. 3. Make your announcement. 4. Press the Goodbye key. (Goodbye) Using Centrex/Exchange Line Switchhook Flash Use the Centrex/Exchange Line Switchhook Flash feature during an established call to use a Centrex service, such as Call Transfer or ThreeWay Calling. To use Centrex/Exchange Line Switchhook Flash: 1. While on a call, press the Centrex Line Switchhook Flash key. A special dial tone sounds. 2. Dial the codes for your custom Centrex feature. 3. Press the Goodbye key to end the call. (Goodbye) 162 Additional call features Charging a call or charging a forced call Use the Call Charge feature to charge a call to a specific account. The Forced Charge feature charges long-distance calls from an IP Deskphone restricted to local calls. To charge a local or long-distance call to an account before you dial: 1. Lift the handset. 2. Choose one of the following: — Press the Charge soft key. — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4. When the dial tone sounds, dial the number. To charge a call in progress: 1. Choose one of the following: or — Press the Transfer soft key. — Press the Conference soft key. 163 Additional call features 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4. Press the line (DN) key to return to the call. To charge a call to an account when you transfer a call: 1. Press the Transfer soft key. The call is placed on hold. 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4. After the dial tone, dial the number to which you are transferring the call. 164 Additional call features 5. Press the Transfer soft key when you hear the IP Deskphone ring. You can talk privately to the person at the transfer number before you press the Transfer soft key. To charge a call to an account when you add someone to a conference call: 1. Press the Conference soft key. The call is placed on hold. 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4. Dial the number of the person you want to add to the conference. 165 Additional call features 5. Press the Conference soft key. Note: You can talk to either party privately, press the Incalls key to talk to the originator or press the Conf key to talk to the transfer number. Alternating between these two keys alternates between the two parties. This needs to be done before pressing the Conf key twice.This also assumes AHA CLS Automatic Hold, is enabled on the handset. Using Enhanced Override Use the Enhanced Override feature to override an active call after you attempt a Forced Camp-on. Use Enhanced Override to make a call or a consultation call, such as placing a call on hold and calling another party. To use Enhanced Override: You receive a busy signal after dialing a phone number. 1. Choose one of the following: or — Press the Override key. — Enter the Override FFC to initiate a Forced Camp-on. If either person on the call disconnects at this time, you receive an overflow (fast busy or engaged) signal. 166 Additional call features 2. Choose one of the following: or — Press the Override key again. — Enter the Override FFC again. The other two people on the call receive an override tone and a conference call is established between the three of you. If anyone disconnects, the other two people remain connected. (Goodbye) 3. To terminate the call, press the Goodbye key. Using Forced Camp-on feature Use the Forced Camp-on feature to automatically ring another IP Deskphone (internal or external) immediately after that IP Deskphone disconnects from its current call. To use Forced Camp-on: You receive a busy signal after dialing a phone number. 167 Additional call features 1. Choose one of the following: or — Press the Override key. — Enter the Override FFC to initiate a Forced Camp-on. The person you called receives a tone. You receive a ring signal or a busy signal, depending on the options chosen. You are now camped-on to the number you dialed. 2. Return the handset to the cradle. 3. When the person you called finishes the call, your IP Deskphone automatically dials the number and both IP Deskphones ring. Answering a call camped-on to your extension: When your IP Deskphone rings, lift the handset. You can program your IP Deskphone for either Camp-on or Call Waiting, but not both. Overriding a busy signal Use the Override feature to override a busy signal and interrupt another call. To override a busy signal: 1. You receive a busy signal after dialing a phone number. 168 Additional call features 2. Choose one of the following: — Press the Override key. or (Goodbye) — Enter the Override FFC. The people in the targeted call receive a tone for approximately 1 second. After the Override feature joins you to the call, a short tone repeats every 16 seconds. 3. To terminate the call, press the Goodbye key. Using Privacy Release Use the Privacy Release feature to enable one or more people who share your DN to join a call. To use Privacy Release in an established state: Press the Privacy Release soft key during a call. People can join the call by pressing the shared number (DN) key on their IP Deskphone (Multiple Appearance DN feature). Using Radio Page Use the Radio Page feature to page a person and stay on the line until they answer. The paged person answers the call after entering a special Page Meet-me code from any IP Deskphone. 169 Additional call features To use Automatic Preselection (Meet-me page): 1. Lift the handset. 2. Dial the Radio Paging Access FFC. The paging tone sounds (two beeps followed by a dial tone). 3. Dial the number of the party you want to page. After dialing, the ringback tone sounds. The paged person can use any IP Deskphone to enter a Radio Paging Answer FFC, plus their own DN number. (Goodbye) or 4. If your call goes unanswered for a preset time period and a 15-second highpitched tone sounds followed by silence, press the Goodbye key or replace the handset. To use Automatic Post-selection: The called party is either busy on the IP Deskphone or away from their desk. To page the called party, you do not need to redial the number of the called party. 170 1. Press the Radio Page soft key. A special dial tone sounds. Additional call features 2. Dial the Radio Paging Access FFC. The ringback tone sounds. The paged person can use any IP Deskphone to enter a Radio Paging Answer FFC, plus their own DN number. (Goodbye) or 3. If your call goes unanswered for a preset time period and a 15-second highpitched tone sounds, followed by silence, press the Goodbye key or replace the handset. To answer a Radio Page: If you carry a Radio Pager, a page indicates that someone dialed your DN. If the Radio Page system is configured to function in Meet-me mode, you can answer the page call from any IP Deskphone. 1. Lift the handset. 2. Dial the Radio Page Answer FFC. The paging tone sounds. 3. Dial your own DN to connect to the paging caller. If the caller has disconnected, a steady high-pitched (number unavailable) tone sounds. 171 Additional call features Using Voice Call Use the Voice Call feature to make an announcement through someone else’s IP Deskphone speaker. To make a voice call: 1. Lift the handset. 2. Press the Voice Call key and make the announcement. 3. Press the Goodbye key. (Goodbye) To respond to a voice call: Your IP Deskphone rings once and the caller's voice transmits through your speaker. Lift the handset. 172 Additional phone features Additional phone features The following features are described in this section: • “Using the Personal Directory” on page 173 • “Using the Callers List” on page 176 • “Using the Redial List” on page 178 • “Using Virtual Office” on page 180 • “Using Media Gateway 1000B” on page 189 Using the Personal Directory Use the Personal Directory feature to create and store up to 100 directory entries. A Personal Directory entry can contain: • last name (up to 24 characters) • first name (up to 24 characters) • phone numbers (up to 31 characters) To use the Personal Directory, press the Directory key and select Personal Directory. To add an entry: 1. Press the Add soft key. If the message Directory is full appears, delete one or more entries to add a new entry. 2. Use the dialpad to enter the name. 173 Additional phone features 3. Press the Next soft key. 4. Use the dialpad to enter the phone number. 5. Do one of the following: or — Press the Done soft key to save the new entry. — Press the Cancel soft key to return to the Add screen. To edit an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Edit soft key and perform your edits. 3. Choose one of the following: or — Press the Done soft key to save the changes. — Press the Cancel soft key to return to the Personal Directory without saving your changes. 174 Additional phone features To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following: or — Press the Confirm soft key to delete the entry. — Press the Cancel soft key to return to the Personal Directory without deleting the entry. To search for an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. 175 Additional phone features Using the Callers List The Callers List feature logs all incoming calls. The Callers List can store up to 100 entries. When the list is full, the system overwrites the oldest entry. Use the Callers List feature to review missed calls and to dial calls. The Callers List contains: • the caller’s last and first name (if available) • the DN of the caller • the time and date of the call • the number of times the caller called Entries in the Callers List are sorted by the time the call arrived. The appearance of names in the Callers List depends on the configuration of Preferred Name Match. If Preferred Name Match is activated on your phone, the Calling Party Name Display (CPND) appears according to the configuration settings on your phone. If Preferred Name Match is off, the CPND appears according to the system configuration. Note: If the caller name is not defined, then only the telephone number is displayed. To access the Callers List, press the Directory key and select Callers List. If password control is enabled, you must enter your SCPW at the prompt. 176 Additional phone features To dial an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Dial soft key. To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following: or — Press the Confirm soft key to delete the entry. — Press the Cancel soft key to return to the Personal Directory without deleting the entry. 177 Additional phone features To delete the entire Callers List: 1. Press the Delete soft key. 2. Choose one of the following soft keys: or — Yes to delete the entire Callers List — No to return to the previous screen Using the Redial List The Redial List feature logs all outgoing calls. Redial List can stored up to 20 entries. When the list is full, the system overwrites the oldest entry. Use the Redial List feature to review calls made, and to redial previously dialed calls. The Redial List contains: • the last and first names of the dialed party (if available) • the DN of the dialed party • the time and date of the last dialed occurrence Entries in the Redial List are sorted by the time the call was received. The appearance of names in the Redial List depends on the configuration of Preferred Name Match. If Preferred Name Match is activated on your phone, the Calling Party Name Display (CPND) appears according to the configuration settings on your phone. If Preferred Name Match is off, the CPND appears according to the system configuration. Note: If the caller name is not defined, then only the telephone number is displayed. To access Redial List, press the Directory key and select Redial List. If password control is enabled, you must enter your SCPW at the prompt. 178 Additional phone features To dial an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Dial soft key. To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following soft keys: or — Yes to delete the entry — No to return to the previous screen To delete the entire Redial List: 1. Press the Delete soft key. 2. Choose one of the following soft keys: or — Yes to delete the entire Redial List — No to return to the previous screen 179 Additional phone features Using Virtual Office The Virtual Office feature provides a service you can use while you are away from your desk to transfer calls, and all your office IP Deskphone features, to a remote IP Deskphone. Virtual Office makes this possible by allowing you to use another IP Deskphone (the Remote phone) to log in to your own home or office IP Deskphone (the Office phone). After you log in, you can access the DNs, autodial numbers, key layout, feature keys, and voicemail features that are configured on your own home or office IP Deskphone. To use Virtual Office, you need your DN and preconfigured Station Control Password (SCPW). You must activate Virtual Office on your Office phone before you can connect to it from a Remote phone. See “Logging in to Virtual Office” on page 181. Consult your system administrator to verify if the Virtual Office feature is available for your use. You can use an IP Deskphone as a Remote phone to connect to your Avaya 1140E IP Deskphone even if it is a different IP Deskphone model. Table 9 shows the IP Deskphones on which you can use Virtual Office to connect to your Avaya 1140E IP Deskphone. Table 9: Virtual Office connection availability Using IP Deskphone Possible to log in to the 1140E? Avaya 1120E IP Deskphone Yes, with restrictions Avaya 1140E IP Deskphone Yes Avaya 1150E IP Deskphone No Avaya 1120E IP Deskphone Yes Avaya 1110 IP Deskphone 180 Yes, with restrictions Additional phone features Table 9: Virtual Office connection availability Using IP Deskphone Possible to log in to the 1140E? IP Phone 2001 Yes, with restrictions Avaya 2033 IP Conference Phone Yes, with restrictions IP Phone 2002 Yes IP Phone 2004 Yes Avaya 2050 IP SoftPhone Avaya 2007 IP Deskphone Yes, with restrictions Yes Note: A Virtual Office login from an Avaya 1140E IP Deskphone to an Avaya 1120E IP Deskphone or Avaya 2050 IP Softphone is blocked in certain situations. Consult your system administrator. Logging in to Virtual Office If the IP Deskphone is configured for Virtual Office, the Virtual soft key is displayed, as shown in Figure 26. Figure 26: Virtual soft key 181 Additional phone features To activate Virtual Office on your Office IP Deskphone from your Remote IP Deskphone: (Virtual) 1. Press the Virtual soft key. 2. At the prompt, enter your user ID. 3. Press the Enter key. 4. At the prompt, enter the home Station Control Password (SCPW). If the user ID is not found locally, the message Locating Remote Server appears. After three failed login attempts, wait 1 hour before attempting to log in again, or contact your system administrator to reset your password. For more information, see “Security features” on page 34. A successful login transfers all the features, time, date, and tones to your Remote IP Deskphone from your Office IP Deskphone. Your Virtual Office session expires after a fixed period of time, (determined by your system administrator). Using Virtual Office on your Remote IP Deskphone Because the display characteristics, including size, vary from one IP Deskphone model to the next, your Office Avaya 1140E IP Deskphone display is different on each Remote phone. Figure 27 shows an Avaya 1140E IP Deskphone logged in as a Remote phone to an 182 Additional phone features Avaya 1140E IP Deskphone Office phone. All the features appear as they do on your Office Avaya 1140E IP Deskphone. Figure 27: Logged in to an Avaya 1140E IP Deskphone Figure 28 shows an Avaya 1120E IP Deskphone logged in as a Remote phone to an Avaya 1140E IP Deskphone Office phone. Fewer display lines are available on the 1120E, so the display provides less information. 183 Additional phone features Figure 28: Logged in to an Avaya 1140E IP Deskphone using an Avaya 1120E IP Deskphone Figure 29 shows an Avaya 2050 IP Softphone logged in as a Remote phone to an Avaya 1140E IP Deskphone Office phone. In this case, the information display is arranged in a different fashion, but all the information is visible at one time. Figure 29: Logged in to an Avaya 1140E IP Deskphone using an Avaya 2050 IP Softphone Regardless of what model of IP Deskphone you use as a Remote phone, a User information line appears, which lists the number of your Office IP Deskphone. 184 Additional phone features Using Virtual Office on your Office IP Deskphone Figure 30 shows the Avaya 1140E IP Deskphone display when the phone is logged out due to remote access. Figure 30: Office phone displays the message Logged Out When activated for Virtual Office by a Remote IP Deskphone, your Office IP Deskphone is logged out and no longer operational. If this is the case when you return to your office, you can disconnect the remote login and regain control of your Office phone. If you do not disconnect the remote login, your Virtual Office session expires after a fixed period of time, determined by your system administrator. 185 Additional phone features To regain operation of a IP Deskphone being used for Virtual Office: Choose one of the following: — To completely disconnect your Office IP Deskphone from the Remote IP Deskphone: a. Press the Home key. b. Enter your User ID and password (this logs the Office IP Deskphone back on to your office network). or — Press the Virtual soft key to log in to another IP Deskphone, and your IP Deskphone becomes a Remote IP Deskphone. Logging out of Virtual Office To log out of Virtual Office, press the Virtual soft key. Emergency calls on your Remote IP Deskphone If you make an emergency call while logged in to Virtual Office on a Remote IP Deskphone, the call is placed to the local emergency service, not to your home office emergency service. Note: Some IP Deskphones are configured as Virtual Office-only telephones and have no assigned DN. However, these IP Deskphones can still be used to make emergency calls. “Emergency Calls only“ is displayed on the IP Deskphone display when not logged in to Virtual Office. When the phone goes off-hook, dial tone is available for emergency calls only. All other calls are restricted. Automatic log out from Virtual Office Your remote Virtual Office IP Deskphone may be configured to automatically log out of Virtual Office after a predetermined period of inactivity. When automatic logout is about to occur, the following message is displayed on the IP Deskphone: "Logout phone now?" 186 Additional phone features Press Yes to allow the IP Deskphone to log out of Virtual Office or press No to remain logged in to Virtual Office and reset the IDLE timer. If no key is pressed, the IP Deskphone logs out of Virtual Office. Troubleshooting Virtual Office Virtual Office can cause error messages to display on-screen. Table 10 lists error messages and describes actions to correct the causes. Table 10: Troubleshooting Virtual Office (Part 1 of 3) Displayed Message Probable Cause Actions Remote IP Deskphone is active (not idle). Wait for remote IP Deskphone to become idle and try again. ACD is logged in. Log out of ACD IP Deskphone before initiating Virtual Office from another IP Deskphone. Make Set Busy is inactive on ACD IP Deskphone. Configure Make Set Busy active on ACD IP Deskphone. Incorrect User ID entered. Enter correct User ID. User ID is not in Gatekeeper database. Notify system administrator. Invalid ID (2) Incorrect User ID entered. Enter correct User ID. Invalid ID (3) Incorrect User ID entered. Enter correct User ID. User ID in Gatekeeper database points to originating Call Server. Notify system administrator. Busy, try again Invalid ID (1) 187 Additional phone features Table 10: Troubleshooting Virtual Office (Part 2 of 3) Displayed Message Probable Cause Actions Locked from Login Three failed attempts to enter the correct Station Control Password. Wait one hour for the lock to clear automatically, or notify system administrator to clear lock. Permission Denied (1) Remote IP Deskphone has no Station Control Password. Notify system administrator. Permission Denied (3) Incorrect User ID entered. Enter correct User ID. Remote IP Deskphone has no Station Control Password. Notify system administrator. Incorrect User ID entered. Enter correct User ID. Attempt to log in to a remote Avaya 1120E IP Deskphone or Avaya 2050 IP Softphone from an Avaya 1140E IP Deskp hone (some restrictions apply). Go to an Avaya 1120E IP Deskphone or Avaya 2050 IP Softphone and try again, or consult your local system administrator. Incorrect User ID entered. Enter correct User ID. Incorrect Station Control Password entered. Select Retry, and try again with the correct Station Control Password. Permission Denied (4) Permission Denied (6) 188 Additional phone features Table 10: Troubleshooting Virtual Office (Part 3 of 3) Displayed Message Probable Cause Actions Server Unreachable (1) Network problem. Notify system administrator if the problem persists. Server Unreachable (2) Network problem. Notify system administrator if the problem persists. VOUD configured on TN Remote IP Deskphone does not have VOUA Class of Service. Notify system administrator. Using Media Gateway 1000B The Media Gateway 1000B (MG 1000B) provides a means of extending Avaya Communication Server 1000 Release 4.5 features to one or more remotely located branch offices using the Branch Office feature. A branch office is a remote location in the network where IP Deskphones, PSTN access, and TDM IP Deskphones are located. Contact your system administrator to see if these functions are available for your use. The Media Gateway 1000B (MG 1000B) IP Deskphone can operate in Normal or Local Mode. Normal Mode The IP Deskphone registers with the Main Office and receives IP Deskphone services from the Main Office. At any time while using Normal Mode, you can check Local Mode functionality (make and receive calls) by enabling Local Mode and returning to Normal Mode. After testing, you can return to Normal Mode (see “Using Resume Normal Mode” on page 190) or wait for 10 minutes. Local Mode If the WAN connection goes down, the IP Deskphone loses communication with the Main Office TPS. It then registers with the MG 1000B and receives IP Deskphone services from the MG 1000B. 189 Additional phone features Features such as Personal Directory, Redial List, and Callers List are not available when operating in Local Mode. When in Local Mode, the IP Deskphone displays the message LOCAL MODE. Using Test Local Mode Use Test Local Mode to check Local Mode functionality (make and receive IP Deskphone calls). Test Local Mode is useful when provisioning has changed for an IP Deskphone on an MG 1000B Controller. 1. Press the Services key. (Services) 2. Press the Up/Down navigation keys to scroll and highlight Test Local Mode. 3. Press the Enter key (the IP Deskphone resets and registers back to the branch office). Using Resume Normal Mode Use the Resume Normal Mode command to return to Normal Mode after testing survival functionality. If you do not use the Resume Normal Mode command after testing, the IP Deskphone automatically returns to Normal Mode in 10 minutes. 1. Press the Services key. (Services) 2. Press the Up/Down navigation keys to scroll and highlight Resume Normal Mode. 190 Additional phone features 3. Press the Enter key (the IP Deskphone registers back to the main office). Troubleshooting MG 1000B The MG 1000B can cause error messages to display on-screen. Table 11 lists error messages and describes actions to correct the causes. Table 11: Troubleshooting MG 1000B Display Message Probable Cause Actions Local Mode Test Local Mode. Press the Services key, and then select Resume Normal Mode. Network problem. Contact system administrator if problem persists. Gatekeeper unable to find end point from Branch User ID. Notify system administrator. Branch User ID not found in any equipped Terminal Number (TN). Notify system administrator. Local Mode Invalid ID (1) Local Mode Invalid ID (2) 191 Using Hospitality features Using Hospitality features Hospitality features are intended for hotel operations. Configuring Automatic Wake-Up Use the Automatic Wake-Up feature to receive a timed reminder call. From your IP Deskphone, you can program the system to automatically place a call to you at a predetermined time. When you answer the call, recorded music plays for up to 30 seconds, followed by a prerecorded announcement or the attendant. To enter the time for an Automatic Wake-Up call: 1. Lift the handset. 2. Dial the Automatic Wake-Up Request FFC. 3. Dial the Automatic Wake-Up time in a 24-hour time format (hhmm). A tone sounds to confirm your entered time. To enter the time in a 24-hour time format, enter the hours followed by the minutes. For example, to set the time to 7:30 a.m., enter 0730; to set it to 9:45 p.m., enter 2145. 4. Press the Goodbye key. (Goodbye) 192 Using Hospitality features To cancel an Automatic Wake-Up call: 1. Lift the handset. 2. Dial the Automatic Wake-Up Quit FFC. 3. Press the Goodbye key. (Goodbye) To verify the time for the Automatic Wake-Up call: 1. Lift the handset. 2. Dial the Automatic Wake-Up Verify FFC. 3. Dial the Automatic Wake-Up time in a 24-hour time format (hhmm). If your query matches the preset time, a confirmation tone sounds. To enter the time in a 24-hour time format, enter the hours followed by the minutes. For example, to set the time to 7:30 a.m., enter 0730; to set it to 9:45 p.m., enter 2145. 4. Press the Goodbye key. (Goodbye) 193 Using Hospitality features Activating Message Registration Use the Message Registration feature to read, change, or reset meters that log your hotel phone calls. To read meters: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Press the Message Registration key. To change a meter: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Dial the correct meter count. 4. Press the * key. 5. Press the Message Registration key. 194 Using Hospitality features To reset a meter to zero: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Press the * key. 4. Press the Message Registration key. Using Maid Identification Use the Maid Identification feature to track the cleaning status of rooms. The maid enters the information from the IP Deskphone in each room. To enter cleaning status: 1. Press the Room Status key. 2. Dial the Directory Number (DN) for the room. 195 Using Hospitality features 3. Dial one of the following cleaning status codes: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped The interrupted dial tone sounds. 4. Press the * key. 5. Dial the Maid ID. If you dial the wrong Maid ID, press the * key and redial the ID. 6. Press the Room Status key. Displaying Room Status Use the Room Status feature to display the status of a room using the Display Module. To display the status of a room: 196 1. Press the Room Status key. Using Hospitality features 2. Dial the Directory Number (DN) for the room. The DN appears followed by a two-digit code. The first digit indicates the occupancy status: 0 = Room vacant 1 = Room occupied The second digit indicates the cleaning status of the room: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped 3. Press the Room Status key. Changing the status of a room: 1. Press the Room Status key. 197 Using Hospitality features 2. Dial the Directory Number (DN) for the room. The DN appears followed by a two-digit code. The first digit indicates the occupancy status: 0 = Room vacant 1 = Room occupied The second digit indicates the cleaning status of the room: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped 3. Dial the status code for the room. A three-digit code appears. The first digit indicates the occupancy status, the second is the previous cleaning status, and the third is the new status. 198 4. Press the Room Status key. Accessing External Server Applications Accessing External Server Applications Use External Server Applications to access a variety of applications directly from your Avaya 1140E IP Deskphone. To find out what features and services are available, contact your system administrator. Depending on what is available on your system, your phone can provide information; for example, local news and weather, stock market information, or traffic reports. For more information about the External Server Applications, consult the Avaya IP Deskphone External Server Applications User Guide. Using Record On Demand key If this feature is enabled, you can use the Record on Demand (ROD) feature key to record your telephone conversation. If your call recording server does not support wideband call recording, you cannot use the call recording feature; for more information, contact your system administrator. Press the ROD key to start or stop the call recording. This key is associated with the active user ID and is displayed only if a call is active. The ROD key blinks while it is connecting to the call recording application, and is lit when the call is recording. The ROD key is displayed in the following scenarios: • Normal operation - Press the ROD key during an active call to record the call. • Call Recording (CR) application in ROD Mode - Press the ROD key during an active call to record the call 199 Accessing External Server Applications • Bulk Recording - For an active call or unregistered DN/Position ID, call recording is initiated even though the ROD key is not pressed. 1. Press the ROD key during an active call. 2. To stop the call recording, press the ROD key again. Using SAVE key Use the SAVE feature key to save the recording of an active call. This key is associated with the active user ID and is operational only if a call is active. The SAVE key is displayed in the following scenarios: • Normal operations - If the SAVE key is pressed during an active call, the call is saved. • CR application in Bulk Record + Save everything mode - Recorded conversation is saved at the end of the call. If the SAVE key is pressed, then the call is not saved. • CR application in Bulk Record + Delete everything mode - Recorded conversation is deleted at the end of the call. If the SAVE key is pressed, then the call is saved. The SAVE key lamp status depends on the status of the call recording. If the call is to be saved, then the lamp is lit. 1. Press the ROD key during an active call. 2. To stop the call recording, press the ROD key again. 200 Accessing External Server Applications 3. Press the SAVE key to save the conversation. 201 Flexible Feature Codes (FFCs) Flexible Feature Codes (FFCs) Use Table 12 to track the FFCs assigned by your system administrator. Table 12: Flexible Feature Codes FFC 202 Feature FFC Feature Automatic Wake-Up Activate Make Set Busy Activate Automatic Wake-Up Deactivate Make Set Busy Deactivate Automatic Wake-Up Verify Malicious Call Trace Call Detail Recording Charge Account Override Call Forward All Calls Activate Pickup Ringing Number Call Forward All Calls Deactivate Pickup Directory Number Call Park Pickup Group Electronic Lock Activate Radio Paging Access Electronic Lock Deactivate Radio Paging Answer Group Call Remote Call Forward Activate Internal Call Forward Activate Remote Call Forward Deactivate Internal Call Forward Deactivate RingAgain Activate RingAgain Deactivate Virtual Office Terminal Log Off Station Control Password Change Virtual Office Terminal Log On Quick Reference Card Quick Reference Card This chapter is the Quick Reference Card for the Avaya 1140E IP Deskphone. Print this chapter as a reference guide. Feature operation AutoDial Store AutoDial Display AutoDial AutoDial Use Display AutoDial Call Forward Activate Forward Deactivate Forward Reinstate Forward View number Display Call Pickup Call Waiting Answer Return to first call Conference Handsfree Activate Forward Cancel Forward Forward Pickup (Hold) Call Waiting (Goodbye) Conf Conf (to end the call) (Handsfree) (Goodbye) Switch to handset Handset to handsfree Activate Headset Activate or deactivate Bluetooth® technology headset* (Handsfree) (to end the call) (Headset) (Goodbye) (Headset) (Headset) Hold Place a call on hold (Hold) Return to a held call Last Number Redial Message (Msg/Inbox) Ring Again Activate RngAgn 203 Quick Reference Card When notified RngAgn RngAgn Deactivate Trans Transfer Trans or Adjust volume (Volume +) (Volume -) Legend Icon Action ( ) Indicates the key cap text label. For example, (Message). Lift the handset, press the line (DN) key or the Handset key. Replace the handset, or press to end the call. (Goodbye) Dial a number. AutoDial Press a line/feature key. An icon flashes when a feature is being programmed. An icon lights steadily when a feature is active. Press the Services key once for Call Platform features, or press the Services key twice for local telephone features. Press the Message/Inbox key. Press the Up/Down Navigation keys Press the Enter key Press the Headset key. Press the Handsfree key. Press the Mute (on/off) key. Press the Directory key. Press the Quit/Stop key. 204 Quick Reference Card Services and Telephone Options menus Services menu (Services) Note: The Services menu contains the Telephone Options, Password Admin, Virtual Office, and MG 1000B menus. Some options are not available on all Avaya 1140E IP Deskphones. Consult your system administrator. The following are the most commonly used options: Telephone Options menu Volume adjustment Pick one of: Ringer Handset Listen Handsfree Listen Headset Listen Buzzer (Quit) Contrast adjustment (Quit) Language (Quit) Note: This language setting controls the language used by features on your phone only. To set the language used elsewhere on your phone, press Services twice, select 1. Preferences, and select 2. Language. Date/Time format (Quit) Local DialPad Tone (Quit) Ring type (Quit) Play OnHook default path (Quit) Note: The Directory key provides access to the Corporate Directory, Personal Directory, Redial List, and Callers List. * To use a headset equipped with Bluetooth® wireless technology, you must first configure the headset and your phone to work together. 205 Quick Reference Card 206 Regulatory and safety information Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. Note: The user should not make changes or modifications not expressly approved by Avaya. Any such changes could void the user’s authority to operate the equipment This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Warnings: • This is a Class B product. In a domestic environment this product can cause radio interference in which case the user must take adequate measures. • Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." 207 Regulatory and safety information To prevent radio interference to the licensed service, this device must be operated indoors only and should be kept away from windows to provide maximum shielding. Table 13 lists EMC compliance for various jurisdictions. Table 13: EMC compliance (Part 1 of 2) Jurisdiction Standard Description United States FCC CFR 47 Part Class B Emissions: FCC Rules for 15 Radio Frequency Devices (see Notes 1 and 2) Canada ICES-003 Class B Emissions: InterferenceCausing Equipment Standard: Digital Apparatus Australia/ New Zealand CISPR 22 Class B Emissions: Information technology equipment - Radio disturbance European Community EN 55022 Class B Emissions: Information technology equipment - Radio disturbance EN 55024 Information technology equipment Immunity characteristics Limits and methods of measurement EN 61000-3-2 Limits for harmonic current emissions (equipment input current <= 16 A per phase) EN 61000-3-3 Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <= 16 208 Regulatory and safety information Table 13: EMC compliance (Part 2 of 2) Jurisdiction Standard Description Japan Regulations for voluntary control measures. VCCI Table 14 lists Safety compliance for various jurisdictions. Table 14: Safety compliance Jurisdiction Standard Description United States UL 60950-1 Canada CSA 60950-1-03 Safety of Information Technology Equipment European Community EN 60950-1 ITE equipment - Safety - Part 1: General requirements Australia/New Zealand AS/NZS 60950.1:2003 Safety of Information Technology Equipment Safety of Information Technology Equipment Other Safety Approvals: IEC 60950-1: ITE equipment - Safety - Part 1: General requirements. 209 Regulatory and safety information Other US/Canada: Hearing Aid Compatibility (HAC) as per FCC Part 68 This equipment complies with the CE Marking requirements. EU Countries: This device complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration may be obtained from http://support.avaya.com/css/ appmanager/public/support or Avaya Inc., 211 Mt. Airy Road, Basking Ridge, NJ 07920 USA. Australia: AS/ACIF S004: Voice Frequency Performance Requirements for Customer Equipment Bluetooth wireless technology: This portable device with its antenna complies with FCCs RF radiation exposure limits for an uncontrolled environment. To maintain compliance, this transmittter must not be cololcated or operate in conjunction with any other antenna or transmitter. 210 Regulatory and safety information DenAn regulatory notice for Japan 211 Regulatory and safety information 212 Third party terms Third party terms Third Party Terms for UNIStim sw releases 4.1 thru 5.0 (Jan 2010 - Nov 2010) Certain portions of the product ("Open Source Components") are licensed under open source license agreements that require Avaya to make the source code for such Open Source Components available in source code format to its licensees, or that require Avaya to disclose the license terms for such Open Source Components. For a period of three years from your date of purchase of a product containing any of the software listed below from Avaya Inc., any Avaya affiliate or an authorized Avaya reseller, we will provide upon request a complete machine readable copy of the source code for such Open Source Component on a medium customarily used for software interchange for a charge no more than our cost of physically performing source distribution. To get access to the source code, you may contact Avaya at (408) 577-7666. The Open Source Components are provided "AS IS". ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR THE CONTRIBUTORS OF THE OPEN SOURCE COMPONENTS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The following component is licensed under Public Domain: DateTime PUBLIC DOMAIN NOTICE National Center for Biotechnology Information 213 Third party terms * This software/database is a "United States Government Work" under the terms of the United States Copyright Act. It was written as part of the author's official duties as a United States Government employee and thus cannot be copyrighted. This software/database is freely available to the public for use. The National Library of Medicine and the U.S. Government have not placed any restriction on its use or reproduction. * Although all reasonable efforts have been taken to ensure the accuracy and reliability of the software and data, the NLM and the U.S. Government do not and cannot warrant the performance or results that may be obtained by using this software or data. The NLM and the U.S. Government disclaim all warranties, express or implied, including warranties of performance, merchantability or fitness for any particular purpose. * Please cite the author in any work or product based on this material. * ===================================================== * Authors: Anton Butanayev, Denis Vakatov, Vladimir Ivanov END OF TERMS AND CONDITIONS GNU The following component is licensed under the GNU General Public V2 license: libstdc++ Copyright (C) 1989, 1997, 1998, 1999 Free Software Foundation, Inc. GNU General Public V2 License GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take 214 Third party terms away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation\'s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author\'s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors\' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone\'s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The \"Program\", below, refers to any such program or work, and a \"work based on the Program\" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into 215 Third party terms another language. (Hereinafter, translation is included without limitation in the term \"modification\".) Each licensee is addressed as \"you\". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program\'s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: * a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. * b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. * c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights 216 Third party terms to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: * a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify 217 Third party terms or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients\' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The 218 Third party terms Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and \"any later version\", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you 219 Third party terms want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the \"copyright\" line and a pointer to where the full notice is found. one line to give the program\'s name and an idea of what it does. Copyright (C) yyyy name of author This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w\'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c\' for details. The hypothetical commands `show w\' and `show c\' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w\' and `show c\'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a \"copyright disclaimer\" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision\' (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. END OF TERMS AND CONDITIONS 220 Third party terms OpenSSL The following component is licensed under OpenSSL license: OpenSSL 0.9.7b OpenSSL License /* ===================================================== * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. * 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 221 Third party terms * 6. Redistributions of any form whatsoever must retain the following acknowledgment: * "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ===================================================== * This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). */ Original SSLeay License ----------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. 222 Third party terms * This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). * Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. * This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: * "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" 223 Third party terms * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] */ END OF TERMS AND CONDITIONS Zlib The following component is licensed under zlib license: Zlib 1.2.1 Zlib License /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.4, March 14th, 2010 Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 224 Third party terms 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler END OF TERMS AND CONDITIONS Curl The following component is licensed under curl license: Curl 7.15.1 Curl License COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2010, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other 225 Third party terms dealings in this Software without prior written authorization of the copyright holder. END OF TERMS AND CONDITIONS Libpng The following component is licensed under libpng license: Libpng 1.2.37 - June 4, 2009 Libpng License This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. libpng versions 1.2.6, August 15, 2004, through 1.2.34, December 18, 2008, are Copyright (c) 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. 226 Third party terms libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or 227 Third party terms consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution. The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated. A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net December 18, 2008 END OF TERMS AND CONDITIONS Kern_random The following component is licensed under kern_random license: Kern_random Copyright Theodore Ts'o, 1994, 1995. All rights reserved. Kern-random License 228 Third party terms .\" This code is derived from software contributed to Berkeley by Chris Torek. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: .\" 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: .\"This product includes software developed by the University of California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" END OF TERMS AND CONDITIONS ConvertUTF The following component is licensed under convert UTF license: 229 Third party terms Convert UTF ConvertUTF License Copyright 2001-2004 Unicode, Inc. Disclaimer This source code is provided as is by Unicode, Inc. No claims are made as to fitness for any particular purpose. No warranties of any kind are expressed or implied. The recipient agrees to determine applicability of information provided. If this file has been purchased on magnetic or optical media from Unicode, Inc., the sole remedy for any claim will be exchange of defective media within 90 days of receipt. Limitations on Rights to Redistribute This Code Unicode, Inc. hereby grants the right to freely use the information supplied in this file in the creation of products supporting the Unicode Standard, and to make copies of this file in any form for internal or external distribution as long as this notice remains attached. END OF TERMS AND CONDITIONS Wchar functions The following component is licensed under wchar functions license: Wchar functions Wchar functions License .\" Copyright (c) 1990, 1991, 1993 .\"The Regents of the University of California. All rights reserved. .\" Copyright (c) , All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 230 Third party terms Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Libjpeg END OF TERMS AND CONDITIONS The following component is licensed under libjpeg license: Libjpeg Libpeg License This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: (1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation. 231 Third party terms (2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group". (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor. END OF TERMS AND CONDITIONS 232 Terms you should know Terms you should know Avaya Communication Server 1000 Your office communication system. Calling Party Name Display Information appearing on the LCD display screen, such as the caller’s name and phone number. The system must have CPND enabled. Category 5 (Cat5) Cable and associated connecting hardware capable of transmitting at speeds up to 100 MHz, used by 10BaseT, 100BaseT4, 100BaseTX. Category 5e (Cat5e) Most Cat5 cable manufactured after 1996 also supports 1000BaseT (GigE) installations, and is designated Cat 5e. Cat5e cable normally has four pairs of copper wire. Category 6 (Cat6) Cable and associated connecting hardware capable of transmitting at speeds up to 200 MHz. Designed specifically to support 1000BaseT (GigE), it is also compatible with 10BaseT, 100BaseT4, and 100BaseTX installations. The cable normally has four pairs of copper wire. Context-sensitive soft keys A set of keys programmed by your system administrator. These four keys, located directly below the display area, have four programmable layers. These keys are also used to configure parameters in the Telephone Options menu. 233 Terms you should know Date/time display The current date and time when the IP Deskphone is in an idle state. Directory Number (DN) A number consisting of one to seven digits for an IP Deskphone, and also known as an extension number. Feature display An area that shows status information about the feature in use. It also displays the name and status of the active session. Feature Status Lamp indicator An LCD or an LED that indicates a data message, contact, or feature status by a flash, wink, steady on, or off. Fixed key The hard-labeled keys on your IP Deskphone. Flexible Feature Codes (FFCs) Specialized codes entered using the dialpad that enable features (for example, Ring Again). Goodbye key A fixed key used to end an active call. Indicator An LCD or an LED that indicates the status of a feature by the flash, wink, steady on, or off. Information display Any display of call activity, lists, prompts, and status of calls. If the text message exceeds the available display area, a scroll arrow icon indicates that you must use the scroll keys to view the remaining text. 234 Terms you should know Interrupted dial tone A broken or pulsed dial tone that sounds when you access some features on your IP Deskphone. Message/Inbox A fixed key on your Avaya 1140E IP Deskphone that connects to your voice messaging system when the key is pressed. Navigation keys Keys used to scroll through menus and lists appearing on the LCD display screen. Off-hook Any line selected to make a call or receive an incoming call. The term off-hook is applied whether (a) the end user lifts up the handset, (b) the end user presses a line key, (c) the call is automatically answered at the IP Deskphone, or (d) a line is automatically selected for an outgoing call. Paging tone A special tone (two beeps followed by dial tone) that sounds when you use the Radio Paging feature. Ringback/ring tone A sound indicating that a call you have made is ringing at its destination. Services key A fixed key used to access options such as Telephone Options, Password Admin, Virtual Office Login, Virtual Office Logout, Test Local Mode, and Resume Normal Mode. Shared Directory Number A DN (extension) that is shared by two or more persons. 235 Terms you should know Special Prefix code (SPRE) Special codes entered using the dialpad, followed by a two-digit access code, that enable features (for example, Call Forward All Calls requires entry of SPRE code + 74). Special dial tone The three consecutive tones followed by dial tone that you hear when accessing IP Deskphone features. Station Control Password (SCPW) Enables security features on your phone to prevent others from making calls from your IP Deskphone and to prevent access to protected features (for example, Remote Call Forward). Status Messages A message displayed to inform the user of important information. A right arrow appears if more than one Status Message is present. Examples of Status Messages include: Message Waiting, All Lines Forwarded to: 6453, Do Not Disturb On, Ring Again active, and Ringer is OFF. System or Switch Your office communication system. Switchhook A button on which the handset presses down, disconnecting your call when you replace the handset. The handset (when lifted) releases the switchhook, and you either answer an incoming call or you receive a dial tone to make a call. User interface Screen displays that interact with the end user as a result of an action or event. 236 Terms you should know Visual Alerter/Message Waiting indicator An LCD or an LED that flashes to indicate that a message is waiting or when the ringer is on. 237 Terms you should know 238 Index Index About the Avaya 1140E IP Deskphone 17 Conferee Selectable Display and Disconnect 154 Conference call 152 Answer a call 132 Configure area code setup 79 Attendant Recall 136 Configure call log options 89 AutoDial 125 Configure Callers List log 76 AutoDial Transfer 160 Configure Name Display format 81 Automatic Answerback 141 Configure New Call indication 77 Automatic Wake-Up 192 Configure Preferred Name Match 78 Connect the components 40 Buzz signal 161 Context-sensitive soft keys 20, 233 Contrast adjustment 70 Copy key 24 Call Features and Flexible Feature Codes 28 Corporate Directory 121 Call Forward 145 Call Join 152 Date/time display 234 Call Page Connect 161 Date/Time format 72 Call Park 136 Directory applications 121 Call party information 233 Directory key 25 Call Pickup 141 Directory Number 234 Call timer 83 disconnect a conferee 155 Call Waiting 143 Display incoming calls 139 Callers List 123 Calling Party Number 139 Display Network Diagnostics Utilities 27 Camp-on, Forced 167 DN 234 Centrex/Exchange Line Switchhook Flash 162 Change feature key labels 83 Electronic Lock 150 Charge a call or charge a forced call 163 Encrypted calling 34 Enhanced Override 166 239 Index Enter key 23 Local Diagnostics 112 Entering and editing text 37 Local Dialpad Tone 73 Expand key 23 Local Mode 189 External server applications 199 Maid Identification 195 Feature display 234 Make Set Busy 158 Fixed key 234 Malicious Call Trace 140 Flexible Feature Code (FFC) 234 Media Gateway 1000B 189 Flexible Feature Codes (FFCs) 202 Meet - me page 170 Goodbye key 24, 234 Group Call 155 Handsfree dialing 119 Headset key 23, 24 Help 15 Message (Inbox) key 25 Message key 235 Message Registration 194 Message waiting indicator 24, 237 More key 21 Mute key 22 Navigation keys 23, 235 Normal Mode 189 Hold key 23 Off-hook 235 Indicator status 234 Off-hook dialing 117 Information display 234 Onhook Default Path 82 Intercom call 130 On-hook dialing 118 Internal Call Forward 147 Override a busy signal 168 Interrupted dial tone 235 Paging tone 235 Language display 71 Personal Directory 122 Last Number Redial 128 Place a call on hold 133 Line (DN) key 21 Predial feature 124 Local Area Network (LAN) 17 Privacy Release 169 240 Index Quit/Stop key 24 Telephone display 28 Telephone information 89 Telephone Options 68 Radio Page 169 Terms 233 Record a Calling Party Number 139 Test Local Mode 190 Redial List 122, 124 Transfer a call 134 Regulatory and safety information 203, 207 Remote Call Forward 148 Resume Normal Mode 190 Ring Again 127 Timed Reminder Recall 135 USB keyboard function keys 38 User Interface 236 Ring type 83 Ringback/ring tone 235 Room Status 196 Virtual Office 180 Secure your telephone 150 Virtual Office login 181 Virtual Office logout 186 Security features 34 Virtual Office on your Remote telephone 182 Self-labeled line/programmable feature keys 21 Voice Call 172 Services key 26, 235 Volume control bar 21 Volume adjustment 69 Shared Directory Numbers 235 Shift/Outbox key 25 Speaker key 22 Special dial tone 236 Special Prefix code (SPRE) 236 Speed Call 128 Station Control Password (SCPW) 34, 236 Status Messages 236 Switchhook 236 System or Switch 236 241 Index 242
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2011:05:20 12:27:06Z Creator Tool : FrameMaker 7.1 Modify Date : 2012:02:29 17:08:26+08:00 Metadata Date : 2012:02:29 17:08:26+08:00 Producer : Acrobat Distiller 9.2.0 (Windows) Format : application/pdf Title : 1140e.book Creator : dlscott Document ID : uuid:6d53a0de-982b-44c0-92b5-5e00b98f3333 Instance ID : uuid:49f4ec46-2d89-40a5-b6fb-ad757580e8be Page Mode : UseOutlines Page Count : 242 Author : dlscottEXIF Metadata provided by EXIF.tools