Wistron MCWP2014M2 Bluetooth Speaker User Manual M2 English
Wistron Corporation Bluetooth Speaker M2 English
Wistron >
user manual
Product name: Music Wrap Bluetooth Portable Speaker Model Name:M2 FCC ID: PU5MCWP2014M2 What’s inside 1. Music Wrap Bluetooth Portable Speaker 2. User Manual Product overview: SIDE VIEW TOP VIEW Connections: 1. Bluetooth: Connect M2 to your mobile device via Bluetooth. 2. AUX: Connect M2 to your mobile device via a 3.5mm audio cable. 3. USB: Connect M2 to a power source using a micro‐USB charging cable. LED indicators: LED Color Blue/Red (alternate) LED State Description Blinking every Searching a Bluetooth device for pairing. 0.5 second Blinking every 5 Paired with a Bluetooth device. seconds Blinking every 1 Blue No connection with a Bluetooth device. second On Connected to a power source and fully charged or in a phone call. Red Blinking every 5 Paired with a Bluetooth device. Battery seconds capacity is low (less than 10%). Blinking every 1 No connection with a Bluetooth device. second Battery capacity is low (less than 10%). On Connected to a power source and currently charging. Operation: Operation Component Action Description Power on Power Button Press and hold for Turn the M2 device on. Bluetooth 3 seconds function is enabled and M2 will auto‐connect with paired device. Otherwise, use a Bluetooth device to search and pair with M2. Power off Power Button Press and hold for 3 seconds Turn the M2 device off. Bluetooth Function Button NFC Press and hold for M2 will enter Bluetooth pairing 5 seconds mode.You can use a Bluetooth enabled device to search and find pairing M2.If prompted for a PIN, enter : 0000 to confirm connection. Alternatively, you can use a NFC enabled device to touch M2 and create a Bluetooth connection. Charging Micro‐USB Port Plug the micro‐USB LED indicator turns red during charging cable charging. When fully charged, LED indicator turns blue. Music Function Button Press once Play/Pause Play current song in paired device. If a song is currently playing, this action will pause the song. Volume + Button A Press Increase volume.A notification tone will confirm when volume reaches the maximum level. Volume ‐ Button B Press Decrease volume.A notification tone will confirm when volume reaches the minimum level. Skip to the Button A Press for 3 seconds next song Go to the While the music is playing, skip to the next song. Button B Press for 3 seconds While the music is playing, go back to the previous song. previous song Answer/End Function Button Press once phone call Answer an incoming call. Press again to end the call.A notification tone will confirm this action. Decline Function Button Press for 3 seconds phone call Decline an incoming phone call. A notification tone will confirm that the incoming call was declined. Switch to Function Button Press for 3 seconds phone/M2 During a phone call, switch the call to the phone. A notification tone will confirm this action. Press and hold function button for 3 seconds again to switch back the call to M2. Redial Function Button Press twice A notification tone will confirm this action, and M2 will redial the last phone number called. Mute Button B Press for 3 seconds A notification tone will confirm that the microphone is muted. Aux Aux Port streaming Hook Hooks Plug a 3.5mm Play and control mediafrom the audio cable to M2 device connected to M2 via AUX and mobile device cable. Link using a cable Link the two speakers together using a cable to secure them from unnecessary movements. Safety Warning: Avoid hearing damage: ‐ Permanent hearing loss may occur if the speaker is used at high volume when it is placed near your ears. Set the volume to a safe level. ‐ Before you place the speaker on your neck, set the volume to the minimum level. After the speaker has been properly positioned on your neck, adjust the volume to a comfortable level. ‐ Turn down the volume if you can’t hear people speaking near you while you wear the speaker on neck. To reduce the risk of electric shock or damage to your equipment: ‐ Plug the USB cable into a device that only has the correct USB port. ‐ Avoid contact with water. Do not ingress water. ‐ Avoid inserting items into the openings of the speaker. ‐ Do not disassemble the speaker. Only an authorized service technician should perform repairs on your speaker. Otherwise, the manufacturer is not responsible for any damage that may result in the disassembly of the speaker. ‐ Avoid over‐bending the strap. ‐ Do not use “Music Wrap” with improper or dangerousactions. Caution: The speaker containing battery part should not be exposed to excessive heat such as fire, sunlight, or other concentrated heat surfaces. Limited Warranty Statement: ‐ The warranty period for Music Wrap product is one (1) year from the date of purchase by the original end user customer from Music Wrap’s authorized distributors. Music Wrap product shall be free from defects in material and workmanship. ‐ The warranty above does not cover defects resulting from abuse or misuse, improper storage, or negligence (to the extent caused by any person or entity other than supplier), improper installation by end user customers, or any warranty claim made after the expiration of the product warranty period. ‐ During the warranty period and upon authorization by a service technician, we will repair or replace the defective parts free of charge. Repair or replacement of defective parts which are out of the warranty coverage will be subject to additional service fees. ‐ The warranty aboveshall be void if the label bearing the serial number has been removed or defaced. FCC Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. About the SAR Information,Please refer to FCC web site and search info(FCC ID: PU5MCWP2014M2) to get access to the SAR info.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2015:01:06 14:19:41+08:00 Create Date : 2015:01:06 14:19:41+08:00 Format : application/pdf Title : Microsoft Word - M2 User Manual English Creator : Administrator Document ID : uuid:2df57acc-18b6-4628-8484-91a9d570de6e Instance ID : uuid:974d2db8-0b27-4fc0-bce1-085310afd866 Page Count : 5 Author : AdministratorEXIF Metadata provided by EXIF.tools