User Manual
What’s inside
1. Bluetooth Portable Speaker
2. USB to Micro-USB Charging Cable
3. User Manual
4. Warranty Card
Product overview:
Power Power
button
Function
button
+Button A
-Button B
Connections:
1. Bluetooth: Connect speaker to your mobile device via Bluetooth.
2. USB: Connect speaker to a power source using a micro-USB charging cable.
SIDE VIEW
TOP VIEW
LED indicators:
LED Color
LED State
Description
Blue/Red (alternate)
Blinking every
0.5 second
Searching a Bluetooth device for pairing.
Blue
Blinking every 5
seconds
Paired with a Bluetooth device.
Blinking every 1
second
No connection with a Bluetooth device.
On
Connected to a power source and fully
charged or in a phone call.
Red
Blinking every 5
seconds
Paired with a Bluetooth device. Battery
capacity is low (less than 10%).
Blinking every 1
second
No connection with a Bluetooth device.
Battery capacity is low (less than 10%).
On
Connected to a power source and currently
charging.
Operation:
Operation
Component
Action
Description
Power on
Power Button
Press and hold for
3 seconds
Turn speaker on. Bluetooth
function is enabled and speaker
will auto-connect with paired
device. Otherwise, use a Bluetooth
device to search and pair with
speaker.
Power off
Power Button
Press and hold for
3 seconds
Turn speaker off.
Bluetooth
pairing
Function Button
Press and hold for
5 seconds
Speaker will enter Bluetooth
pairing mode. You can use a
Bluetooth enabled device to
search and find the speaker name.
If prompted for a PIN, enter : 0000
to confirm connection.
Charging
Micro-USB Port
Plug the micro-USB
charging cable
LED indicator turns red during
charging. When fully charged, LED
indicator turns blue.
Music
Play/Pause
Function Button
Press once
Play current song in paired device.
If a song is currently playing, this
action will pause the song.
Volume +
Button A
Press
Increase volume. A notification
tone will confirm when volume
reaches the maximum level.
Volume -
Button B
Press
Decrease volume. A notification
tone will confirm when volume
reaches the minimum level.
Skip to the
next song
Button A
Press for 3 seconds
While the music is playing, skip to
the next song.
Go to the
previous
song
Button B
Press for 3 seconds
While the music is playing, go back
to the previous song or the
beginning of current song(depends
on the music player).
Answer/End
phone call
Function Button
Press once
Answer an incoming call. Press
again to end the call. A notification
tone will confirm this action.
Decline
phone call
Function Button
Press for 3 seconds
Decline an incoming phone call. A
notification tone will confirm that
the incoming call was declined.
Switch to
phone/
speaker
Function Button
Press for 3 seconds
During a phone call, switch the call
to the phone. A notification tone
will confirm this action.
Press and hold function button for
3 seconds again to switch back the
call to speaker.
Redial
Function Button
Press twice
A notification tone will confirm this
action, and speaker will redial the
last phone number called.
Mute
Button B
Press for 3 seconds
A notification tone will confirm
that the microphone is muted.
How to clean: If there is any dirt, wipe it using a clean soft cloth or a soft brush
dipped in water or alcohol
*Note that not all types of dirt can be fully and effectively removed
FCC Statement:
1. Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
2. NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desig
ned to provide reasonable protection against harmful interference in a residentia
l installation. This equipment generates, uses and can radiate radio frequency en
ergy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular install
ation. If this equipment does cause harmful interference to radio or television recep
tion, which can be determined by turning the equipment off and on, the user is enco
uraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
3. This device complies with Part 15 of the FCC Rules. Operation is subject to the f
ollowing two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Safety Warning:
Avoid hearing damage:
- Permanent hearing loss may occur if the speaker is used at high volume when it
is placed near your ears. Set the volume to a safe level.
- Before you place the speaker on your neck, set the volume to the minimum level.
After the speaker has been properly positioned on your neck, adjust the volume
to a comfortable level.
- Turn down the volume if you can’t hear people speaking near you while you
wear the speaker on neck.
To reduce the risk of electric shock or damage to your equipment:
- Plug the USB cable into a device that only has the correct USB port.
- Avoid contact with water. Do not ingress water.
- Avoid inserting items into the openings of the speaker.
- Do not disassemble the speaker. Only a service technician who is authorized by
original equipment manufacturer should perform repairs on your speaker.
Otherwise, the manufacturer is not responsible for any damage that may result
in the disassembly of the speaker.
- Avoid over-bending the strap.
- Do not use speaker with improper or dangerous actions.
Caution: The speaker containing battery part should not be exposed to excessive
heat such as fire, sunlight, or other concentrated heat surfaces.