User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2977373 |
| Application ID | osAhYG6iapue651MgM0tcA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.8kB (272511 bits) |
| Date Submitted | 2016-05-02 00:00:00 |
| Date Available | 2016-05-02 00:00:00 |
| Creation Date | 2016-02-01 13:45:44 |
| Document Lastmod | 2016-02-01 13:45:44 |
| Document Title | User Manual |
| Document Author: | Simon Tsai/WHQ/Wistron |
What’s inside 1. 2. 3. 4. Bluetooth Portable Speaker USB to Micro-USB Charging Cable User Manual Warranty Card Product overview: SIDE VIEW Power Power button Button A Function button Button B TOP VIEW Connections: 1. Bluetooth: Connect speaker to your mobile device via Bluetooth. 2. USB: Connect speaker to a power source using a micro-USB charging cable. LED indicators: LED Color Blue/Red (alternate) LED State Description Blinking every Searching a Bluetooth device for pairing. 0.5 second Blinking every 5 Paired with a Bluetooth device. seconds Blinking every 1 Blue No connection with a Bluetooth device. second On Connected to a power source and fully charged or in a phone call. Red Blinking every 5 Paired with a Bluetooth device. Battery seconds capacity is low (less than 10%). Blinking every 1 No connection with a Bluetooth device. second Battery capacity is low (less than 10%). On Connected to a power source and currently charging. Operation: Operation Component Action Description Power on Power Button Press and hold for Turn speaker on. Bluetooth 3 seconds function is enabled and speaker will auto-connect with paired device. Otherwise, use a Bluetooth device to search and pair with speaker. Power off Power Button Press and hold for Turn speaker off. 3 seconds Bluetooth Function Button pairing Press and hold for Speaker will enter Bluetooth 5 seconds pairing mode. You can use a Bluetooth enabled device to search and find the speaker name. If prompted for a PIN, enter : 0000 to confirm connection. Charging Micro-USB Port Plug the micro-USB LED indicator turns red during charging cable charging. When fully charged, LED indicator turns blue. Music Function Button Press once Play/Pause Play current song in paired device. If a song is currently playing, this action will pause the song. Volume + Button A Press Increase volume. A notification tone will confirm when volume reaches the maximum level. Volume - Button B Press Decrease volume. A notification tone will confirm when volume reaches the minimum level. Skip to the Button A Press for 3 seconds next song Go to the While the music is playing, skip to the next song. Button B Press for 3 seconds While the music is playing, go back previous to the previous song or the song beginning of current song(depends on the music player). Answer/End Function Button Press once phone call Answer an incoming call. Press again to end the call. A notification tone will confirm this action. Decline Function Button Press for 3 seconds phone call Decline an incoming phone call. A notification tone will confirm that the incoming call was declined. Switch to Function Button Press for 3 seconds During a phone call, switch the call phone/ to the phone. A notification tone speaker will confirm this action. Press and hold function button for 3 seconds again to switch back the call to speaker. Redial Function Button Press twice A notification tone will confirm this action, and speaker will redial the last phone number called. Mute Button B Press for 3 seconds A notification tone will confirm that the microphone is muted. How to clean: If there is any dirt, wipe it using a clean soft cloth or a soft brush dipped in water or alcohol *Note that not all types of dirt can be fully and effectively removed FCC Statement: 1. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desig ned to provide reasonable protection against harmful interference in a residentia l installation. This equipment generates, uses and can radiate radio frequency en ergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular install ation. If this equipment does cause harmful interference to radio or television recep tion, which can be determined by turning the equipment off and on, the user is enco uraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 3. This device complies with Part 15 of the FCC Rules. Operation is subject to the f ollowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Safety Warning: Avoid hearing damage: - Permanent hearing loss may occur if the speaker is used at high volume when it is placed near your ears. Set the volume to a safe level. - Before you place the speaker on your neck, set the volume to the minimum level. After the speaker has been properly positioned on your neck, adjust the volume to a comfortable level. - Turn down the volume if you can’t hear people speaking near you while you wear the speaker on neck. To reduce the risk of electric shock or damage to your equipment: - Plug the USB cable into a device that only has the correct USB port. - Avoid contact with water. Do not ingress water. Avoid inserting items into the openings of the speaker. Do not disassemble the speaker. Only a service technician who is authorized by original equipment manufacturer should perform repairs on your speaker. Otherwise, the manufacturer is not responsible for any damage that may result in the disassembly of the speaker. Avoid over-bending the strap. Do not use speaker with improper or dangerous actions. Caution: The speaker containing battery part should not be exposed to excessive heat such as fire, sunlight, or other concentrated heat surfaces.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 Language : zh-TW Tagged PDF : Yes Author : Simon Tsai/WHQ/Wistron Creator : Microsoft® Word 2010 Create Date : 2016:02:01 13:45:44+08:00 Modify Date : 2016:02:01 13:45:44+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools