Wistron TP00019A LENOVO NOTEBOOK COMPUTER (WITH WACOM DIGITIZER, MODEL: SU6E-12W04AU, SU6C-12W04AU) User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1434487
Application ID	5FuX7DjZysUKipmAQWKikQ==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	187.71kB (2346394 bits)
Date Submitted	2011-03-21 00:00:00
Date Available	2011-05-05 00:00:00
Creation Date	2011-02-18 15:00:36
Producing Software	PDFlib+PDI 7.0.4 (Win32)
Document Lastmod	2011-02-18 15:01:03
Document Title	Users Manual 1
Document Creator	Arbortext 5.4

User Guide
ThinkPad X220, X220i, X220 Tablet, and X220i Tablet
Notes: Before using this information and the product it supports, be sure to read the following:
• Safety and Warranty Guide
• Regulatory Notice
•
“Important safety information” on page vi
• Appendix C “Notices” on page 253
The Safety and Warranty Guide and the Regulatory Notice have been uploaded on the Web site. To refer to
them, go to http://www.lenovo.com/support, and then click User Guides & Manuals.
First Edition (April 2011)
© Copyright Lenovo 2011.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are
sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to
use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant
a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth
in Contract No. GS-35F-05925.
Contents
Read this first . . . . . . . . . . . . . . v
Important safety information . . . . . . . . . . vi
Conditions that require immediate action . .
vii
Safety guidelines . . . . . . . . . . . .
vii
Chapter 1. Product Overview . . . . . . 1
Locating computer controls, connectors, and
indicators. . . . . . . . . . . . . . . .
Front view. . . . . . . . . . . . . .
Right-side view. . . . . . . . . . . .
Left-side view . . . . . . . . . . . .
Bottom view . . . . . . . . . . . . .
Rear view . . . . . . . . . . . . . .
Status indicators . . . . . . . . . . .
Locating important product information . . . .
Machine type and model label . . . . . .
FCC ID and IC Certification number label .
Certificate of Authenticity label . . . . .
Features . . . . . . . . . . . . . . . .
ThinkPad X220 and X220i features . . . .
ThinkPad X220 Tablet and X220i Tablet
features . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . .
ThinkPad X220 and X220i specifications. .
ThinkPad X220 Tabet and X220i Tablet
specifications . . . . . . . . . . . .
Operating environment . . . . . . . . . .
ThinkVantage Technologies and software . . .
Accessing applications in Windows 7 . . .
Access Connections . . . . . . . . .
Active Protection System . . . . . . . .
Client Security Solution . . . . . . . .
Fingerprint Software. . . . . . . . . .
Lenovo ThinkVantage Tools . . . . . . .
Lenovo ThinkVantage Toolbox . . . . . .
Message Center Plus . . . . . . . . .
Password Manager . . . . . . . . . .
Power Manager . . . . . . . . . . .
Product Recovery . . . . . . . . . .
Presentation Director . . . . . . . . .
Rescue and Recovery . . . . . . . . .
System Update . . . . . . . . . . .
ThinkVantage GPS . . . . . . . . . .
Lenovo SimpleTap . . . . . . . . . .
Lenovo ThinkVantage Tablet Shortcut Menu
. . 1
. . 1
. . 8
12
15
17
19
24
24
25
27
29
29
30
31
31
32
33
33
34
36
36
36
36
37
37
37
37
38
38
38
38
38
39
39
39
Chapter 2. Using your computer . . .
41
© Copyright Lenovo 2011
Register your computer . . . . . . . . . . .
Frequently asked questions . . . . . . . . .
Tablet mode. . . . . . . . . . . . . . . .
Using the tablet mode . . . . . . . . . .
Using the Tablet Digitizer Pen . . . . . . .
Using the touch panel . . . . . . . . . .
Using the Tablet buttons . . . . . . . . .
Using the Tablet Shortcut Menu . . . . . .
Special keys and buttons . . . . . . . . . .
ThinkVantage button . . . . . . . . . .
Numeric keypad . . . . . . . . . . . .
Function key combinations . . . . . . . .
Volume and mute buttons . . . . . . . .
Windows key and Application key . . . . .
Using the UltraNav pointing device. . . . . . .
Using the TrackPoint pointing device . . . .
Using the touch pad. . . . . . . . . . .
Behavior of the UltraNav and an external
mouse . . . . . . . . . . . . . . . .
Adding the UltraNav icon to the system tray .
Power management . . . . . . . . . . . .
Checking battery status . . . . . . . . .
Using the ac power adapter. . . . . . . .
Charging the battery . . . . . . . . . .
Maximizing battery life . . . . . . . . . .
Managing your battery power . . . . . . .
Power-saving modes . . . . . . . . . .
Handling the battery. . . . . . . . . . .
Connecting to the network . . . . . . . . . .
Ethernet connections . . . . . . . . . .
Wireless connections . . . . . . . . . .
Using a projector or external display . . . . . .
Changing display settings . . . . . . . .
Connecting a projector or external display . .
Setting up a presentation. . . . . . . . .
Using dual displays . . . . . . . . . . .
Using audio features . . . . . . . . . . . .
Using an integrated camera . . . . . . . . .
Using the ThinkLight feature . . . . . . . . .
Using the media card reader . . . . . . . . .
Inserting an ExpressCard, a flash media card,
or a smart card. . . . . . . . . . . . .
Removing an ExpressCard, a flash media
card, or a smart card . . . . . . . . . .
41
41
43
43
45
46
47
48
48
49
49
51
54
55
56
56
58
59
59
60
60
60
61
61
61
61
63
64
64
64
72
72
73
77
78
79
80
81
81
82
83
Chapter 3. You and your computer . .
85
Accessibility and comfort . . . . . . . . . .
85
Ergonomic information. . . . .
Adjusting your computer to fit you
Accessibility information . . . .
FullScreen Magnifier function . .
Traveling with your computer . . . .
Travel tips . . . . . . . . . .
Travel accessories . . . . . .
85
86
87
87
88
88
88
Chapter 4. Security . . . . . . . . . .
91
Attaching a mechanical lock . . . . . . . . .
Using passwords. . . . . . . . . . . . . .
Passwords and sleep (standby) mode . . . .
Typing passwords . . . . . . . . . . .
Power-on password . . . . . . . . . . .
Hard disk passwords . . . . . . . . . .
Supervisor password . . . . . . . . . .
Hard disk security . . . . . . . . . . . . .
Setting the security chip . . . . . . . . . . .
Using a fingerprint reader . . . . . . . . . .
Using a fingerprint reader in ThinkPad X220
and X220i . . . . . . . . . . . . . . .
Using a fingerprint reader in ThinkPad X220
Table and X220i Tablet . . . . . . . . . .
Notice on deleting data from your hard disk drive
or solid state drive . . . . . . . . . . . . .
Using and understanding firewalls . . . . . . .
Protecting data against viruses . . . . . . . .
91
91
92
92
92
93
95
97
98
99
Chapter 5. Recovery overview . . .
Creating and using recovery media . . . . .
Creating recovery media . . . . . . . .
Using recovery media . . . . . . . . .
Performing backup and recovery operations . .
Performing a backup operation . . . . .
Performing a recovery operation . . . . .
Using the Rescue and Recovery workspace . .
Creating and using a rescue medium . . . . .
Creating a rescue medium . . . . . . .
Using a rescue medium . . . . . . . .
Reinstalling preinstalled applications and device
drivers . . . . . . . . . . . . . . . . .
Solving recovery problems . . . . . . . . .
107
108
108
109
109
110
110
111
111
111
112
113
113
113
114
115
Static electricity prevention . . . . . . . . . .
Replacing the battery . . . . . . . . . . . .
Replacing the keyboard . . . . . . . . . . .
Replacing the palm rest . . . . . . . . . . .
Replacing the hard disk drive . . . . . . . . .
Replacing the solid state drive . . . . . . . .
Installing and replacing the PCI Express Mini Card
for wireless LAN/WiMAX connection . . . . . .
User Guide
102
Chapter 6. Replacing devices . . .
ii
99
117
117
118
120
124
127
130
133
Installing and replacing the PCI Express Mini Card
for wireless WAN connection . . . . . . . . .
Installing and replacing the mSATA solid state
drive. . . . . . . . . . . . . . . . . . .
Replacing memory . . . . . . . . . . . . .
Replacing the SIM card . . . . . . . . . . .
Chapter 7. Enhancing your
computer . . . . . . . . . . . . . .
Finding ThinkPad options . . . . . . . . . .
ThinkPad X220 UltraBase . . . . . . . . . .
ThinkPad X220 Ultrabase top view . . . . .
ThinkPad X220 Ultrabase bottom view . . .
Attaching a ThinkPad X220 Ultrabase . . . .
Detaching a ThinkPad X220 Ultrabase . . .
Security feature . . . . . . . . . . . .
ThinkPad Battery 19+ . . . . . . . . . . . .
ThinkPad Battery 19+ top view . . . . . .
ThinkPad Battery 19+ bottom view . . . . .
Attaching a ThinkPad Battery 19+ . . . . .
Detaching a ThinkPad Battery 19+ . . . . .
Charging a ThinkPad Battery 19+ . . . . .
ThinkPad Port Replicator Series 3, ThinkPad Mini
Dock Series 3, and ThinkPad Mini Dock Plus
Series 3 . . . . . . . . . . . . . . . . .
Front view. . . . . . . . . . . . . . .
Rear view . . . . . . . . . . . . . . .
Attaching a ThinkPad Port Replicator Series
3, ThinkPad Mini Dock Series 3, or ThinkPad
Mini Dock Plus Series 3 . . . . . . . . .
Detaching a ThinkPad Port Replicator Series
3, ThinkPad Mini Dock Series 3, and ThinkPad
Mini Dock Plus Series 3 . . . . . . . . .
Security feature . . . . . . . . . . . .
Using the system lock key . . . . . . . .
Chapter 8. Advanced
configuration . . . . . . . . . . . .
Installing a new operating system . . . . . . .
Before you begin . . . . . . . . . . . .
Installing Windows 7 . . . . . . . . . .
Installing Windows Vista . . . . . . . . .
Installing Windows XP . . . . . . . . . .
Installing device drivers . . . . . . . . . . .
Installing the driver for the 4-in-1 Media Card
Reader . . . . . . . . . . . . . . . .
Installing the driver for USB 3.0 . . . . . .
Installing ThinkPad Monitor File for Windows
2000/XP/Vista/7 . . . . . . . . . . . .
Installing Intel Chipset Support for Windows
2000/XP/Vista/7 . . . . . . . . . . . .
Installing drivers and software . . . . . . .
ThinkPad Setup . . . . . . . . . . . . . .
139
143
145
148
151
151
151
152
153
153
155
157
158
158
158
159
159
160
161
162
165
168
170
172
174
175
175
175
176
177
178
180
180
180
181
182
183
183
Config menu. . . . . . . . .
Date and time menu. . . . . .
Security menu . . . . . . . .
Startup menu . . . . . . . .
Restart menu . . . . . . . .
ThinkPad Setup items . . . . .
Updating your system UEFI BIOS
Using system management. . . . .
System management . . . . .
Setting management features . .
Chapter 9. Preventing problems . .
General tips for preventing problems . . . . .
Making sure device drivers are current . . . .
Getting the latest drivers from the Web site .
Getting the latest drivers using System
Update . . . . . . . . . . . . . . .
Taking care of your computer . . . . . . . .
Cleaning the cover of your computer . . .
© Copyright Lenovo 2011
Chapter 11. Getting support . . . .
203
Appendix A. Regulatory
information . . . . . . . . . . . . .
203
204
204
204
205
207
Chapter 10. Troubleshooting
computer problems . . . . . . . . .
Diagnosing problems . . . . . . . . .
Using Lenovo ThinkVantage Toolbox .
Using the In-ROM Diagnostics program
Troubleshooting . . . . . . . . . . .
Computer stops responding . . . .
Spills on the keyboard . . . . . . .
Error messages . . . . . . . . .
Errors without messages . . . . . .
Beep errors . . . . . . . . . . .
Memory problems . . . . . . . .
Modem and networking . . . . . .
Keyboard and other pointing devices .
Display and multimedia devices . . .
Fingerprint reader problems. . . . .
Battery and power . . . . . . . .
Drives and other storage devices . .
Software problems . . . . . . . .
Ports and connectors . . . . . . .
Universal Serial Bus problems . . . .
A docking station or port replicator
problem . . . . . . . . . . . .
184
184
185
186
187
187
199
199
200
201
209
209
209
209
210
210
211
211
213
214
214
215
219
221
230
231
234
235
235
235
Before you contact Lenovo . .
Register your computer .
Download system updates
Record information . . .
Getting help and service . . .
Using diagnostic programs
Lenovo support Web site .
Calling Lenovo . . . . .
Purchasing additional services
237
Wireless related information . . . . . . . . .
Location of the UltraConnect wireless
antennas . . . . . . . . . . . . . . .
Locating wireless regulatory notices . . . .
Export classification notice . . . . . . . . . .
Electronic emission notices. . . . . . . . . .
Federal Communications Commission
Declaration of Conformity . . . . . . . .
Industry Canada Class B emission compliance
statement . . . . . . . . . . . . . . .
European Union - Compliance to the
Electromagnetic Compatibility Directive . . .
German Class B compliance statement . . .
Korea Class B compliance statement . . . .
Japan VCCI Class B compliance statement . .
Japan compliance statement for products
which connect to the power mains with
rated current less than or equal to 20 A per
phase . . . . . . . . . . . . . . . .
Lenovo product service information for
Taiwan . . . . . . . . . . . . . . . .
Pointer to the printed pub for additional regulatory
information . . . . . . . . . . . . . . . .
Appendix B. WEEE and recycling
statements . . . . . . . . . . . . .
EU WEEE statements . . . . . . . . . . . .
Japan recycling statements . . . . . . . . .
Appendix C. Notices . . . . . . . .
Trademarks . . . . . . . . . . . . . . . .
. . .
237
237
237
237
238
238
238
238
243
245
245
246
247
248
248
248
248
249
249
250
250
250
250
250
251
251
251
253
254
236
iii
iv
User Guide
Read this first
Be sure to follow the important tips given here to continue to get the most use and enjoyment out of your
computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail.
When your computer is turned on or the battery is charging, the base, the palm
rest, and some other parts may become hot. The temperature they reach
depends on the amount of system activity and the level of charge in the battery.
Extended contact with your body, even through clothing, could cause
discomfort or even a skin burn.
• Avoid keeping your hands, your lap, or any other part of your body in
contact with a hot section of the computer for any extended time.
• Periodically take hands from using the keyboard by lifting your hands from
the palm rest.
Protect yourself from the heat generated by the ac power adapter.
When the ac power adapter is connected to an electrical outlet and your
computer, it generates heat.
Extended contact with your body, even through clothing, may cause a skin
burn.
• To avoid spills and the danger of electrical shock, keep liquids away from
your computer.
• Never use it to warm your body.
Prevent your computer from getting wet.
• To avoid spills and the danger of electrical shock, keep liquids away from
your computer.
Protect the cables from being damaged.
Applying strong force to cables may damage or break them.
• Route communication lines, or the cables of an ac power adapter, a mouse, a
keyboard, a printer, or any other electronic device, so that they cannot be
walked on, tripped over, pinched by your computer or other objects, or in
any way subjected to treatment that could interfere with the operation of
your computer.
© Copyright Lenovo 2011
Protect your computer and data when moving it.
Before moving a computer equipped with a hard disk drive, do one of the
following, and make sure that the power switch is off or is blinking:
• Turn it off.
• Press Fn+F4 to put it in sleep (standby) mode.
• Press Fn+F12 to put it in hibernation mode.
This will help to prevent damage to the computer, and possible loss of data.
Handle your computer gently.
• Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on
your computer, display, or external devices.
Carry your computer carefully.
• Use a quality carrying case that provides adequate cushioning and protection.
• Do not pack your computer in a tightly packed suitcase or bag.
• Before putting your computer in a carrying case, make sure that it is off, in sleep
(standby) mode (Fn+F4), or in hibernation mode (Fn+F12). Do not put a computer
in a carrying case while it is turned on.
Important safety information
Note: Read important safety information first.
This information can help you safely use your notebook personal computer. Follow and retain all information
included with your computer. The information in this document does not alter the terms of your purchase
agreement or the Lenovo® Limited Warranty. For more information, see “Warranty Information” in the Safety
and Warranty Guide that comes with your computer.
Customer safety is important. Our products are developed to be safe and effective. However, personal
computers are electronic devices. Power cords, power adapters, and other features can create potential
safety risks that can result in physical injury or property damage, especially if misused. To reduce these
risks, follow the instructions included with your product, observe all warnings on the product and in the
operating instructions, and review the information included in this document carefully. By carefully following
the information contained in this document and provided with your product, you can help protect yourself
from hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In addition to notebook
computers, some products (such as speakers and monitors) ship with external power adapters. If you have
such a product, this information applies to your product. In addition, computer products contain a coin-sized
internal battery that provides power to the system clock even when the computer is unplugged, so the
battery safety information applies to all computer products.
vi
User Guide
Conditions that require immediate action
Products can become damaged due to misuse or neglect. Some product damage is serious enough
that the product should not be used again until it has been inspected and, if necessary, repaired by
an authorized servicer.
As with any electronic device, pay close attention to the product when it is turned on. On very rare
occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you
might hear sounds like popping, cracking or hissing. These conditions might merely mean that an
internal electronic component has failed in a safe and controlled manner. Or, they might indicate
a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.
Contact the Customer Support Center for further guidance. For a list of Service and Support phone
numbers, see the following Web site:
http://www.lenovo.com/support/phone
Frequently inspect your computer and its components for damage or wear or signs of danger. If you
have any question about the condition of a component, do not use the product. Contact the Customer
Support Center or the product manufacturer for instructions on how to inspect the product and
have it repaired, if necessary.
In the unlikely event that you notice any of the following conditions, or if you have any safety concerns
with your product, stop using the product and unplug it from the power source and telecommunication
lines until you can speak to the Customer Support Center for further guidance.
• Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are
cracked, broken, or damaged.
• Signs of overheating, smoke, sparks, or fire.
• Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign
substances on the battery.
• A cracking, hissing or popping sound, or strong odor that comes from the product.
• Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord or
power adapter.
• The computer product, power cord, or power adapter has been exposed to water.
• The product has been dropped or damaged in any way.
• The product does not operate normally when you follow the operating instructions.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for
or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions,
or until you get a suitable replacement.
Safety guidelines
Always observe the following precautions to reduce the risk of injury and property damage.
For more information, see “Important safety information” in the Safety and Warranty Guide comes with your
computer.
Service and upgrades
Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or
your documentation. Only use a Service Provider who is approved to repair your particular product.
Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically are
referred to as options. Replacement parts approved for customer installation are referred to as Customer
© Copyright Lenovo 2011
vii
Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for
customers to install options or replace CRUs. You must closely follow all instructions when installing or
replacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside a
product are zero. Before you remove the covers from a product equipped with a power cord, always make
sure that the power is turned off and that the product is unplugged from any power source. For more
information on CRUs, refer to Chapter 6 “Replacing devices” on page 117 for this product. If you have any
questions or concerns, contact the Customer Support Center.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety.
DANGER
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer
cool before opening the cover.
viii
User Guide
Power cords and power adapters
DANGER
Use only the power cords and power adapters supplied by the product manufacturer.
The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm2, or
better. For other countries, the suitable types shall be used accordingly.
Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in
ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect power cord and power adapters from liquids. For instance, do not leave your power cord or
power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids
can cause a short circuit, particularly if the power cord or power adapter has been stressed by
misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector
terminals on a power adapter, which can eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the AC input pins or shows signs of
overheating (such as deformed plastic) at the AC input or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use
are rated to handle the electrical requirements of the product. Never overload these devices. If power strips
are used, the load should not exceed the power strip input rating. Consult an electrician for more information
if you have questions about power loads, power requirements, and input ratings.
© Copyright Lenovo 2011
ix
Plugs and outlets
DANGER
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain
a replacement.
Do not share an electrical outlet with other home or commercial appliances that draw large amounts
of electricity; otherwise, unstable voltage might damage your computer, data, or attached devices.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded
electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into
a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an
approved outlet adapter or to replace the outlet with one that enables this safety feature. Never
overload an electrical outlet. The overall system load should not exceed 80 percent of the branch
circuit rating. Consult an electrician for more information if you have questions about power loads
and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close
to the equipment. Do not fully extend power cords in a way that will stress the cords.
Be sure that the power outlet provides the correct voltage and current for the product you are
installing.
Carefully connect and disconnect the equipment from the electrical outlet.
Power supply statement
DANGER
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
External devices
CAUTION:
Do not connect or disconnect any external device cables other than Universal Serial Bus (USB) and
1394 cables while the computer power is on; otherwise, you might damage your computer. To avoid
possible damage to attached devices, wait at least five seconds after the computer is shut down to
disconnect external devices.
User Guide
Batteries
DANGER
Personal computers manufactured by Lenovo contain a coin cell battery to provide power to
the system clock. In addition, many mobile products, such as notebook computers, utilize a
rechargeable battery pack to provide system power when in portable mode. Batteries supplied by
Lenovo for use with your product have been tested for compatibility and should only be replaced
with approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or
short circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge
the battery pack strictly according to instructions included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame
to “vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any
discharge from your battery or the buildup of foreign materials on the battery leads, stop using the
battery and obtain a replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some rechargeable
batteries (particularly Lithium Ion batteries), leaving a battery unused in a discharged state could
increase the risk of a battery short circuit, which could shorten the life of the battery and can also
pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store
these batteries in a discharged state.
Rechargeable battery notice
DANGER
Do not attempt to disassemble or modify the battery pack. Attempting to do so can cause an
explosion, or liquid leakage from the battery pack. A battery pack other than the one specified by
Lenovo, or a disassembled or modified battery pack is not covered by the warranty.
If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The battery
pack contains a small amount of harmful substances. To avoid possible injury:
• Replace only with a battery of the type recommended by Lenovo.
• Keep the battery pack away from fire.
• Do not expose it to water or rain.
• Do not attempt to disassemble it.
• Do not short-circuit it.
• Keep it away from children.
• Do not drop the battery pack.
Do not put the battery pack in trash that is disposed of in landfills. When disposing of the battery,
comply with local ordinances or regulations.
The battery pack should be stored at room temperature, charged to approximately 30 to 50%
of capacity. We recommend that battery pack be charged about once per year to prevent
overdischarge.
© Copyright Lenovo 2011
xi
Lithium coin cell battery notice
DANGER
Danger of explosion if battery is incorrectly replaced.
When replacing the lithium coin cell battery, use only the same or an equivalent type that is
recommended by the manufacturer. The battery contains lithium and can explode if not properly
used, handled, or disposed of.
Do not:
• Throw or immerse into water
• Heat to more than 100°C (212°F)
• Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing CR (manganese dioxide) lithium coin cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply. Go to:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
xii
User Guide
Heat and product ventilation
DANGER
Computers, ac power adapters, and many accessories can generate heat when turned on and when
batteries are charging. notebook computers can generate a significant amount of heat due to their
compact size. Always follow these basic precautions:
• When your computer is turned on or the battery is charging, the base, the palm rest, and some
other parts may become hot. Avoid keeping your hands, your lap, or any other part of your
body in contact with a hot section of the computer for any extended length of time. When you
use the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time.
Your computer generates some heat during normal operation. The amount of heat depends on
the amount of system activity and the battery charge level. Extended contact with your body,
even through clothing, could cause discomfort or even a skin burn. Periodically take breaks
from using the keyboard by lifting your hands from the palm rest; and be careful not to use
the keyboard for any extended length of time.
• Do not operate your computer or charge the battery near flammable materials or in explosive
environments.
• Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and
reliable operation. These features might inadvertently become blocked by placing the product on
a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.
• When the ac power adapter is connected to an electrical outlet and your computer, it generates
heat. Do not place the adapter in contact with any part of your body while using it. Never use the
ac power adapter to warm your body. Extended contact with your body, even through clothing,
may cause a skin burn.
For your safety, always follow these basic precautions with your computer:
• Keep the cover closed whenever the computer is plugged in.
• Regularly inspect the outside of the computer for dust accumulation.
• Remove dust from vents and any perforations in the bezel. More frequent cleanings might be
required for computers in dusty or high-traffic areas.
• Do not restrict or block any ventilation openings.
• Do not operate your computer inside furniture, as this might increase the risk of overheating.
• Airflow temperatures into the computer should not exceed 35°C (95°F).
© Copyright Lenovo 2011
xiii
Electrical current safety information
DANGER
Electric current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
• Do not use your computer during a lightning storm.
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet.
• Connect to properly wired outlets any equipment that will be attached to this product.
• Whenever possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• Disconnect the attached power cords, battery pack, and all the cables before you open the
device covers, unless instructed otherwise in the installation and configuration procedures.
• Do not use you computer until all internal parts enclosures are fastened into place. Never use
the computer when internal parts and circuits are exposed.
DANGER
Connect and disconnect cables as described in the following procedures when installing, moving,
or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. Attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlets.
5. Turn devices ON.
To disconnect:
1. Turn everything OFF.
2. Remove power cords from outlets.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
The power cord must be disconnected from the wall outlet or receptacle before installing all other
electrical cables connected to the computer.
The power cord may be reconnected to the wall outlet or receptacle only after all other electrical
cables have been connected to the computer.
Liquid crystal display (LCD) notice
CAUTION:
The LCD is made of glass, and rough handling or dropping the computer can cause the LCD to break.
If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately wash the
affected areas with water for at least 15 minutes; if any symptoms are present after washing, get
medical care.
Using headphones or earphones
If your computer has both a headphone connector and an audio-out connector, always use the headphone
connector for headphones (also called a headset) or earphones.
CAUTION:
Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of
xiv
User Guide
the equalizer to maximum increases the earphones and headphones output voltage and therefore the
sound pressure level.
Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the
output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The
headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification
limits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect against
hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7
limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN
50332-2 can be dangerous due to excessive sound pressure levels.
If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of
the headphones or earphones and the computer already complies with the specifications of EN 50332-1.
If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5
Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to
excessive sound pressure levels.
Additional safety information
DANGER
Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger
of suffocation.
Notice for Tablet PC users
Safety Notice for users in Australia:
DANGER
Do not connect phone line while using tablet mode.
Notice for users in the U.S.A.
Many PC products and accessories contain cords, cables or wires, such as power cords or cords to connect
the accessory to a PC. If this product has such a cord, cable or wire, then the following warning applies:
WARNING
Handling the cord on this product or cords associated with accessories sold with this product will expose
you to lead, a chemical known to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
Save these instructions.
© Copyright Lenovo 2011
xv
xvi
User Guide
Chapter 1. Product Overview
This chapter provides information about the locations of connectors, locating important product information,
computer features, specifications, operating environment, and preinstalled software programs.
This chapter contains the following topics:
•
“Locating computer controls, connectors, features, and indicators” on page 1
•
“Locating important product information” on page 24
•
“Specifications” on page 31
•
“Operating environment” on page 33
•
“ThinkVantage Technologies and software” on page 33
Locating computer controls, connectors, and indicators
This section introduces you to the hardware features of your computer, and then gives you the basic
information you'll need to start taking advantage of its functions.
• Front
• Right-side
• Left-side
• Rear
• Bottom
• Status indicators
Front view
This section introduces front view of your notebook computer.
© Copyright Lenovo 2011
ThinkPad X220 and X220i front view
Figure 1. ThinkPad X220 and X220i front view
1 Wireless WAN (auxiliary) and Wireless LAN/WiMAX
(auxiliary)
3 Integrated camera
2 ThinkLight
4 Wireless LAN (third), Wireless LAN/WiMAX (main), and
Wireless WAN (main)
5 Computer display
6 System and power-status indicators
7 Power switch
8 PCI Express Mini Card slot for wireless LAN/WiMAX
9 PCI Express Mini Card slot for wireless WAN or mSATA
solid state drive (SSD)
10 Fingerprint reader
11 TrackPoint buttons
12 Touch pad
13 TrackPoint pointing stick
14 Fn key
15 CapsLock indicator
16 ThinkVantage button
17 Volume control buttons
18 Built-in microphone
Wireless WAN (auxiliary) and Wireless LAN/WiMAX (auxiliary)
The built-in antennas for the wireless communication are located at the top left and the top right portions of
your computer display.
Wireless LAN (third), Wireless LAN/WiMAX (main), and Wireless WAN (main)
The built-in antennas for the wireless communication are located at the top left and the top right portions of
your computer display.
For the specific locations of each antenna, refer to “Location of the UltraConnect wireless antennas” on
page 246.
User Guide
2
ThinkLight
You can use your computer under less than perfect lighting conditions.
To illuminate the keyboard, turn on the ThinkLight by pressing Fn+PgUp. To turn it off, press Fn+PgUp again.
Integrated camera
Some models have the integrated camera. By using this camera, you can take pictures or hold a video
conference.
For more information about how to use the camera, refer to “Using an integrated camera” on page 80.
Computer display
The high-resolution, thin-film transistor (TFT) display provides clear and brilliant text and graphics.
For details, refer to the instructions in “Changing display settings” on page 72.
System and power-status indicators
Your computer has the system status indicators and the power status indicators. For the detailed information
about the location and meaning of each indicator, see “ThinkPad X220i and X220i status indicators”
on page 19.
Power switch
Use the power switch to turn on the computer. To turn off your computer, use the Start menu shutdown
options.
If you cannot turn off the computer by this method, press and hold the power switch for 2 seconds.
If your computer stops responding, and you cannot turn it off, press and hold the power switch for 4 seconds
or more. If the system is still not reset, remove the ac power adapter and the battery.
The power switch can also be programmed via Power Manager to shut down the computer or put it into
sleep (standby) or hibernation.
PCI Express Mini Card slot for wireless LAN/WiMAX
Your computer might include a PCI Express Mini Card in the PCI Express Mini Card slot which enables
wireless LAN/WiMAX communications.
PCI Express Mini Card slot for wireless WAN or mSATA solid state drive (SSD)
Your computer might include a PCI Express Mini Card in the PCI Express Mini Card slot which enables
wireless WAN communications.
With Lenovo technologies advancing to provide you with the best engineered systems, some models are
equipped with an mSATA solid state drive for data storage. This cutting-edge technology enables notebook
computers to be lighter, smaller and faster.
10
Fingerprint reader
Some models have the fingerprint reader. The fingerprint authentication technology enables you to use your
fingerprint to start the computer and enter the ThinkPad Setup.
For details, refer to the instructions in “Using a fingerprint reader” on page 99.
Chapter 1. Product Overview
11
TrackPoint buttons
12
Touch pad
13
TrackPoint pointing stick
The keyboard contains the unique TrackPoint® pointing device. Pointing, selecting, and dragging are all part
of a single process that you can perform without moving your fingers from typing position.
Move your fingertip across the UltraNav touch pad to move the pointer.
The TrackPoint and TrackPoint buttons provide functions similar to those of a mouse and its buttons.
14
Fn key
Use the Fn key to take advantage of ThinkPad functions, such as turning on the ThinkLight. To use ThinkPad
functions, press Fn + the required function key marked in blue.
15
CapsLock indicator
The indicator of CapsLock is located on the CapsLock key.
For more information about CapsLock indicator, see “ThinkPad X220i and X220i status indicators” on
page 19.
16
ThinkVantage button
You can also use the ThinkVantage button to interrupt the startup sequence of your computer and start
the Rescue and Recovery® workspace, which runs independently of the Windows® operating system
and is hidden from it.
Note: If your computer is a Windows 7 model, Lenovo ThinkVantage Toolbox will be displayed.
17
Volume control buttons
The built-in volume buttons enable you to quickly adjust the volume or mute the sound from your computer.
For details, refer to the instructions in “Volume and mute buttons” on page 54.
18
Built-in microphone
The built-in microphone captures sound and voice when it is used with an application program capable
of handling audio.
User Guide
ThinkPad X220 Tablet and X220i Tablet front view
Figure 2. Front view
1 Wireless WAN (auxiliary) and Wireless LAN/WiMAX
(auxiliary)
3 Built-in microphone
2 Integrated camera
4 Wireless LAN (third), Wireless WAN (main), and
Wireless LAN/WiMAX (main)
5 Computer display
6 Fingerprint reader
7 Power switch
8 ThinkVantage button
9 PCI Express Mini Card slot for wireless LAN/WiMAX
10 PCI Express Mini Card slot for wireless WAN or
mSATA solid state drive (SSD)
11 TrackPoint pointing stick
12 TrackPoint buttons
13 Touch pad
14 CapsLock indicator
15 Fn key
16 Volume control buttons
17 System and power-status indicators
18 Tablet Buttons
19 Built-in stereo speaker
Wireless WAN (auxiliary) and Wireless LAN/WiMAX (auxiliary)
Wireless LAN (third), Wireless WAN (main), and Wireless LAN/WiMAX (main)
The built-in antennas for the wireless communication are located at the top left and the top right portions of
your computer display.
For the specific locations of each antenna, refer to “Location of the UltraConnect wireless antennas” on
page 246.
Chapter 1. Product Overview
2
Integrated camera
Some models have the integrated camera. By using this camera, you can take pictures or hold a video
conference.
For more information about how to use the camera, refer to “Using an integrated camera” on page 80.
Built-in microphone
The built-in microphone captures sound and voice when it is used with an application program capable
of handling audio.
Computer display
The high-resolution, thin-film transistor (TFT) display provides clear and brilliant text and graphics.
For details, refer to the instructions in “Changing display settings” on page 72.
Fingerprint reader
Some models have the fingerprint reader. The fingerprint authentication technology enables you to use your
fingerprint to start the computer and enter the ThinkPad Setup.
For details, refer to the instructions in “Using a fingerprint reader” on page 102.
Power switch
Use the power switch to turn on the computer. To turn off your computer, use the Start menu shutdown
options.
If you cannot turn off the computer by this method, press and hold the power switch for 2 seconds.
If your computer stops responding, and you cannot turn it off, press and hold the power switch for 4 seconds
or more. If the system is still not reset, remove the ac power adapter and the battery.
The power switch can also be programmed via Power Manager to shut down the computer or put it into
sleep (standby) or hibernation.
ThinkVantage button
You can use the ThinkVantage button to interrupt the startup sequence of your computer and start the Rescue
and Recovery workspace, which runs independently of the Windows operating system and is hidden from it.
Note: If your computer is a Windows 7 model, you can press ThinkVantage button to open Lenovo
ThinkVantage Toolbox.
PCI Express Mini Card slot for wireless LAN/WiMAX
Your computer might include a PCI Express Mini Card in the PCI Express Mini Card slot which enables
wireless LAN/WiMAX communications.
10
PCI Express Mini Card slot for wireless WAN or mSATA solid state drive (SSD)
Your computer might include a PCI Express Mini Card in the PCI Express Mini Card slot which enables
wireless WAN communications.
With Lenovo technologies advancing to provide you with the best engineered systems, some models are
equipped with an mSATA solid state drive for data storage. This cutting-edge technology enables notebook
computers to be lighter, smaller and faster.
User Guide
11
TrackPoint pointing stick
12
TrackPoint buttons
13
Touch pad
14
CapsLock indicator
The indicator of CapsLock is located on the CapsLock key.
For more information about CapsLock indicator, see “ThinkPad X220i and X220i Tablet status indicators”
on page 22.
15
Fn key
Use the Fn key to take advantage of ThinkPad functions, such as turning on the ThinkLight. To use ThinkPad
functions, press Fn + the required function key marked in blue.
16
Volume control buttons
The built-in volume buttons enable you to quickly adjust the volume or mute the sound from your computer.
For details, refer to the instructions in “Volume and mute buttons” on page 54.
17
System and power-status indicators
Your computer has the system status indicators and the power status indicators. For the detailed information
about the location and meaning of each indicator, see “ThinkPad X220i and X220i Tablet status indicators”
on page 22.
18
Tablet Buttons
The Tablet Buttons allow you to control your computer in tablet mode, even without the use of the keyboard
and UltraNav.
19
Built-in stereo speaker
The stereo speakers are built into your computer.
For details, refer to the instructions in “Volume and mute buttons” on page 54.
Chapter 1. Product Overview
Right-side view
This section provides right-side view for your computer.
ThinkPad X220 and X220i right-side view
Figure 3. Right-side view
1 Security keyhole
2 Hard disk drive or solid state drive
3 Combo audio jack
4 Ethernet connector
5 Always On USB connector
6 Media card reader slot
Security keyhole
Your computer comes with a security keyhole. You can purchase a security cable and lock to fit this keyhole.
Hard disk drive or solid state drive
Your computer may have a large-capacity, customer-upgradable hard disk drive that can meet a variety of
storage demands. To keep the drive safe, Active Protection System™ is installed on your computer. For
details, refer to “Access Connections” on page 36
If you wish, you can purchase another hard disk drive and install it in the Serial Ultrabay™ Slim in the
ThinkPad X220 UltraBase™.
With Lenovo technologies advancing to provide you with the best engineered systems, some models are
equipped with a solid state drive (SSD) for data storage. This cutting-edge technology enables notebook
computers to be lighter, smaller and faster.
Note: The hidden service partition is the reason why there is less free space than expected on your hard disk
drive or SSD. This reduction is more noticeable on the SSD because of its smaller capacity.
Combo audio jack
To listen to the sound from your computer, connect a headphone or a headset, that has a 3.5mm 4-pole
plug, to the combo audio jack.
User Guide
Notes:
• If you are using a headset with a function switch, for example, a headset for an iPhone® mobile digital
device, do not press this switch while using the headset. If you press it, the headset microphone will
be disabled, and the internal microphone will be enabled instead.
• The combo audio jack does not support a conventional microphone. For more information about the audio
devices supported by the combo audio jack of your compute, see “Using audio features” on page 79.
Ethernet connector
Connect your computer to a LAN with the Ethernet connector.
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.
You can only connect an Ethernet cable to this connector.
Two indicators, to the upper right and left of the connector, show the status of the network connection.
When your computer connects to a LAN and a session with the network is available, the upper right indicator
is solid green. While data is being transmitted, the upper left indicator blinks yellow.
For details, refer to the instructions in “Access Connections” on page 36.
Note: If you attach your computer to the ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3,
or ThinkPad Mini Dock Plus Series 3 and use an Ethernet connector, use the Ethernet connector on the
ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, or ThinkPad Mini Dock Plus Series 3,
not the one on the computer.
Always On USB connector
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
By default, even if your computer is in sleep (standby) mode, the Always On USB connector still enables
you to charge some devices, such as iPod®, iPhone, and BlackBerry® smartphones, by attaching the
devices to the connector.
However, with the ac power adapter attached, if you want to charge these devices when your computer
is in hibernation mode or powered off, you will need to open the Power Manager program and configure
corresponding settings to enable the Always On USB connector function. For details about how to enable
the Always On USB connector function, refer to the on-line help of the Power Manager program.
Note: Your computer is compatible with USB 1.1 and 2.0.
Media card reader slot
Depending on the model, your computer may have a media card reader slot. The media card reader
supports the following cards:
• SD card
• SDHC card
• SDXC card
• MultiMediaCard
Note: Your computer does not support the CPRM feature for SD card.
Chapter 1. Product Overview
For details, refer to the instructions in “Using an ExpressCard, a smart card, or a flash media card” on
page 81.
ThinkPad X220 Tablet and X220i Tablet right-side view
Figure 4. Right-side view
1 Security keyhole
2 Tablet Digitizer Pen
3 Hard disk drive or solid state drive
4 Combo audio jack
5 Ethernet connector
6 Always On USB connector
7 Media card reader slot
Security keyhole
Your computer comes with a security keyhole. You can purchase a security cable and lock to fit this keyhole.
Tablet Digitizer Pen
The Tablet Digitizer Pen is used to control your computer in “Tablet mode” on page 43 as you would a
mouse and a keyboard.
Hard disk drive or solid state drive
Your computer may have a large-capacity, customer-upgradable hard disk drive that can meet a variety of
storage demands. To keep the drive safe, Active Protection System™ is installed on your computer. For
details, refer to “Access Connections” on page 36.
If you wish, you can purchase another hard disk drive and install it in the Serial Ultrabay Slim in the ThinkPad
X220 UltraBase.
With Lenovo technologies advancing to provide you with the best engineered systems, some models are
equipped with a solid state drive (SSD) for data storage. This cutting-edge technology enables notebook
computers to be lighter, smaller and faster.
Note: The hidden service partition is the reason why there is less free space than expected on your hard disk
drive or SSD. This reduction is more noticeable on the SSD because of its smaller capacity.
10
User Guide
4
Combo audio jack
To listen to the sound from your computer, connect a headphone or a headset, that has a 3.5mm 4-pole
plug, to the combo audio jack.
Notes:
• If you are using a headset with a function switch, for example, a headset for an iPhone mobile digital
device, do not press this switch while using the headset. If you press it, the headset microphone will
be disabled, and the internal microphone will be enabled instead.
• The combo audio jack does not support a conventional microphone. For more information about the audio
devices supported by the combo audio jack of your computer, see “Using audio features” on page 79.
Ethernet connector
Connect your computer to a LAN with the Ethernet connector.
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.
You can only connect an Ethernet cable to this connector.
Two indicators, to the upper right and left of the connector, show the status of the network connection.
When your computer connects to a LAN and a session with the network is available, the upper right indicator
is solid green. While data is being transmitted, the upper left indicator blinks yellow.
For details, refer to the instructions in “Access Connections” on page 36.
Note: If you attach your computer to the ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3,
or ThinkPad Mini Dock Plus Series 3 and use an Ethernet connector, use the Ethernet connector on the
ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, or ThinkPad Mini Dock Plus Series 3,
not the one on the computer.
Always On USB connector
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
By default, even if your computer is in sleep (standby) mode, the Always On USB connector still enables
you to charge some devices, such as iPod, iPhone, and BlackBerry smartphones, by attaching the devices
to the connector.
However, with the ac power adapter attached, if you want to charge these devices when your computer
is in hibernation mode or powered off, you will need to open the Power Manager program and configure
corresponding settings to enable the Always On USB connector function. For details about how to enable
the Always On USB connector function, refer to the on-line help of the Power Manager program.
Note: Your computer is compatible with USB 1.1 and 2.0.
Media card reader slot
Depending on the model, your computer may have a media card reader slot. The media card reader
supports the following cards:
• SD card
• SDHC card
• SDXC card
Chapter 1. Product Overview
11
• MultiMediaCard
Note: Your computer does not support the CPRM feature for SD card.
For details, refer to the instructions in “Using an ExpressCard, a smart card, or a flash media card” on
page 81.
Left-side view
This section provides left-side view for your computer.
ThinkPad X220 and X220i left-side view
Figure 5. Left-side view
1 ExpressCard slot
2 Wireless radio switch
3 USB connector (left)
4 DisplayPort connector
5 Monitor connector
6 USB connector
7 Fan louvers (left)
ExpressCard slot
Your computer has an ExpressCard slot for a 54 mm-wide card.
For details, refer to the instructions in “Using an ExpressCard, a smart card, or a flash media Card” on
page 81.
Wireless radio switch
You can quickly turn the wireless features of your computer on and off using this switch.
12
User Guide
3
USB connector (left)
The Universal Serial Bus connector is used for connecting devices compatible with a USB interface, such as
a printer or a digital camera.
Note: Your computer is compatible with USB 1.1 and 2.0.
When you attach a USB cable to the connector, make sure that the mark is to the upper side. Otherwise the
connector might be damaged.
DisplayPort connector
Your computer supports the DisplayPort, a next-generation digital display interface that connects a
compatible projector, external monitor, or HDTV to your computer.
Monitor connector
You can attach an external monitor or a projector to your computer to display computer information.
Note: If you attach your computer to the ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series
3, or ThinkPad Mini Dock Plus Series 3 and use a monitor connector, use the monitor connector on the
ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, or ThinkPad Mini Dock Plus Series 3,,
not the one on the computer.
For details, refer to the instructions in “Attaching an external monitor” on page 73.
USB connector
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
Notes:
• Your computer may look slightly different from the illustrations.
• Your computer is compatible with USB 1.1 and 2.0. Some models are also compatible with USB 3.0.
• If your computer is a USB 3.0 model, any function specific to USB 3.0 will not work until your Windows
operating system has been started. However, USB 2.0 or 1.0 devices will work.
Fan louvers (left)
The internal fan and louvers enable air to circulate in the computer and cool the central processor.
Note: To avoid impeding airflow, do not place any obstacle in front of the fan.
Chapter 1. Product Overview
13
ThinkPad X220 Tablet and X220i Tablet left-side view
Figure 6. Left-side view
1 ExpressCard slot
2 Wireless radio switch
3 USB connectors (left)
4 DisplayPort connector
5 Monitor connector
6 USB connector
7 Fan louvers (left)
ExpressCard slot
Your computer has an ExpressCard slot for a 54 mm-wide card.
For details, refer to the instructions in “Using an ExpressCard, a smart card, or a flash media Card” on
page 81.
Wireless radio switch
You can quickly turn the wireless features of your computer on and off using this switch.
USB connectors (left)
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
Note: Your computer is compatible with USB 1.1 and 2.0.
When you attach a USB cable to the connector, make sure that the mark is to the upper side. Otherwise the
connector might be damaged.
DisplayPort connector
Your computer supports the DisplayPort, a next-generation digital display interface that connects a
compatible projector, external monitor, or HDTV to your computer.
14
User Guide
5
Monitor connector
You can attach an external monitor or a projector to your computer to display computer information.
Note: If you attach your computer to the ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series
3, or ThinkPad Mini Dock Plus Series 3 and use a monitor connector, use the monitor connector on the
ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, or ThinkPad Mini Dock Plus Series 3,
not the one on the computer.
For details, refer to the instructions in “Attaching an external monitor” on page 73.
USB connector
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
Notes:
• Your computer may look slightly different from the illustrations.
• Your computer is compatible with USB 1.1 and 2.0. Some models are also compatible with USB 3.0.
• If your computer is a USB 3.0 model, any function specific to USB 3.0 will not work until your Windows
operating system has been started. However, USB 2.0 or 1.0 devices will work.
Fan louvers (left)
The internal fan and louvers enable air to circulate in the computer and cool the central processor.
Note: To avoid impeding airflow, do not place any obstacle in front of the fan.
Bottom view
This section provides bottom view for your computer.
Chapter 1. Product Overview
15
ThinkPad X220 and X220i bottom view
Figure 7. Bottom view
1 Battery
2 SIM card slot
3 Docking connector
4 Memory-upgrade slot
5 Built-in stereo speaker
Battery
Use your computer with battery power whenever ac power is unavailable.
By installing a second battery, available as an option, in the n the serial Ultrabay slim, you can extend the
operating time of the computer. You can also use Power Manager to adjust your power setting as needed.
For details, refer to the instructions in “Power Manager” on page 38.
SIM card slot
If your computer has a wireless WAN feature, it may require a SIM (Subscriber Identification Module) card to
establish a wireless WAN (Wide Area Network) connections. Depending on the country of delivery, the SIM
card may be already installed in the SIM card slot.
Docking connector
With a ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, ThinkPad Mini Dock Plus Series 3, or
ThinkPad X220 Ultrabase, you can extend the computer capabilities when you are in your office or home.
Memory-upgrade slot
You can increase the amount of memory in your computer by installing a memory module in the memory
bay. Memory modules are available as options.
Built-in stereo speaker
The stereo speakers are built into your computer.
For details, refer to the instructions in “Volume and mute buttons” on page 54.
16
User Guide
ThinkPad X220 Tablet and X220i Tablet bottom view
Figure 8. Bottom view
1 Battery
2 SIM card slot
3 Docking connector
4 Memory-upgrade slot
Battery
Use your computer with battery power whenever ac power is unavailable.
For details, refer to the instructions in “Power Manager” on page 38.
SIM card slot
If your computer has a wireless WAN feature, it may require a SIM (Subscriber Identification Module) card to
establish a wireless WAN (Wide Area Network) connections. Depending on the country of delivery, the SIM
card may be already installed in the SIM card slot.
Docking connector
With a ThinkPad X220 Ultrabase, you can extend the computer capabilities when you are in your office or
home.
Memory-upgrade slot
You can increase the amount of memory in your computer by installing a memory module in the memory
bay. Memory modules are available as options.
Rear view
This section introduces rear view of your computer.
Chapter 1. Product Overview
17
ThinkPad X220 and X220i rear view
Figure 9. Rear view
1 Power jack
2 Fan louvers (rear)
Power jack
The ac power adapter cable connects to the computer power jack to provide power to the computer and
charge the battery.
Fan louvers (rear)
The internal fan and louvers enable air to circulate in the computer and cool the central processor.
Note: To avoid impeding airflow, do not place any obstacle in front of the fan.
18
User Guide
ThinkPad X220 Tablet and X220i Tablet rear view
Figure 10. Rear view
1 Power jack
2 Fan louvers (rear)
Power jack
The ac power adapter cable connects to the computer power jack to provide power to the computer and
charge the battery.
Fan louvers (rear)
The internal fan and louvers enable air to circulate in the computer and cool the central processor.
Note: To avoid impeding airflow, do not place any obstacle in front of the fan.
Status indicators
Your computer has system-status indicators and power-status indicators. The status indicators show the
current status of your computer.
ThinkPad X220i and X220i status indicators
Your computer has system-status indicators and power-status indicators. The status indicators show the
current status of your computer.
Chapter 1. Product Overview
19
Status indicators
Device Access
A hard disk drive or an optional drive, such as a drive in the Ultrabay, is being used to read or write data.
When this indicator is blinking, do not put the computer into sleep (standby) mode, remove the
device from the bay, or turn off the computer.
Bluetooth status
• Green: The feature is on, and the radio link is ready for use, or the data is being transmitted.
• Off: The Bluetooth feature is disabled.
Wireless LAN/Wireless WAN/WiMAX status
• Green: The wireless LAN feature (the 802.11b/g Standard, 802.11a/b/g or 802.11n draft 2.0), wireless
WAN feature or WiMAX feature is on, and the radio link is ready for use, or the data is being transmitted.
• Off: Wireless network devices are disabled or the radio is turned off.
Caps Lock
Caps Lock mode is enabled. You can enter all alphabetic characters (A-Z) in upper case without pressing
the Shift key.
Speaker mute button and 5 Microphone mute button
If you mute the sound and then turn off your computer, the sound will remain muted when you turn on your
computer again. To turn on the sound, press the plus (+) or minus (-) button.
Power On
The power switch stays lit whenever the computer is on, blinks when the computer is in sleep (standby)
mode, and is off when the computer is off.
20
User Guide
8
Numeric lock
By default, when the numeric lock is on, the numeric lock indicator is displayed on the screen. To change the
settings of the numeric lock indicator, see “Changing display settings” on page 72.
Note: Another mode available for your computer, though there is no indicator for it, is Scroll Lock mode.
When this mode is enabled, the arrow keys can be used as function keys for screen-scrolling, but not for
moving the cursor. To enable or disable this mode, press ScrLk. Not all application programs support
this function.
Power-status indicators
The computer has status indicators that show the mode (sleep/standby, hibernation, or normal), ac power
status, the status of the battery, and the status of the color sensor (on some models). The following shows
the location and the meaning of the indicators:
Sleep (standby in Windows XP) status
• Green: The computer is in sleep (standby) mode.
• Blinking green: The computer is entering sleep (standby) or hibernation mode, or is resuming normal
operation.
Battery status
• Green: The battery charge level is 20% or higher
• Orange: The battery charge level is between 5% and 20%.
• Fast blinking orange: The battery charge level is lower than 5%.
• Slow blinking orange: The battery is being charged. When it reaches 20%, the blinking color changes to
green.
• Slow blinking green: The battery has between 20% and 80% charge, and charging is continuing.
When the battery reaches 80% charge, the battery status indicator stops blinking, but the charging
may continue until the battery is 100% charged.
Note: If the computer is operating on battery power, the battery status indicator does not work while the
computer is turned off or is in sleep (standby) mode or hibernation mode.
• Quick blinking orange: An error occurred in the battery.
• The battery status indicator blinks three times: The ac power adapter is attached to the computer.
Chapter 1. Product Overview
21
• The battery status indicator is off: The battery is fully charged or the battery is detached.
ThinkPad X220i and X220i Tablet status indicators
Your computer has system-status indicators and power-status indicators. The status indicators show the
current status of your computer.
Status indicators
Power On
The power switch stays lit whenever the computer is on, blinks when the computer is in sleep (standby)
mode, and is off when the computer is off.
Speaker mute button and 4 Microphone mute button
If you mute the sound and then turn off your computer, the sound will remain muted when you turn on your
computer again. To turn on the sound, press the plus (+) or minus (-) button.
Caps Lock
Caps Lock mode is enabled. You can enter all alphabetic characters (A-Z) in upper case without pressing
the Shift key.
Wireless LAN/Wireless WAN/WiMAX status
• Green: The wireless LAN feature (the 802.11b/g Standard, 802.11a/b/g or 802.11n draft 2.0), wireless
WAN feature or WiMAX feature is on, and the radio link is ready for use, or the data is being transmitted.
• Off: Wireless network devices are disabled or the radio is turned off.
Bluetooth status
• Green: The feature is on, and the radio link is ready for use, or the data is being transmitted.
• Off: The Bluetooth feature is disabled.
22
User Guide
7
Device Access
A hard disk drive or an optional drive, such as a drive in the Ultrabay, is being used to read or write data.
When this indicator is blinking, do not put the computer into sleep (standby) mode, remove the
device from the bay, or turn off the computer.
Numeric lock
By default, when the numeric lock is on, the numeric lock indicator is displayed on the screen. To change the
settings of the numeric lock indicator, see “Changing display settings” on page 72.
Note: Another mode available for your computer, though there is no indicator for it, is Scroll Lock mode.
When this mode is enabled, the arrow keys can be used as function keys for screen-scrolling, but not for
moving the cursor. To enable or disable this mode, press ScrLk. Not all application programs support
this function.
Power-status indicators
The computer has status indicators that show the mode (sleep/standby, hibernation, or normal), ac power
status, the status of the battery, and the status of the color sensor (on some models). The following shows
the location and the meaning of the indicators:
Sleep (standby in Windows XP) status
• Green: The computer is in sleep (standby) mode.
• Blinking green: The computer is entering sleep (standby) or hibernation mode, or is resuming normal
operation.
Battery status
• Green: The battery charge level is 20% or higher
• Orange: The battery charge level is between 5% and 20%.
• Fast blinking orange: The battery charge level is lower than 5%.
• Slow blinking orange: The battery is being charged. When it reaches 20%, the blinking color changes to
green.
• Slow blinking green: The battery has between 20% and 80% charge, and charging is continuing.
When the battery reaches 80% charge, the battery status indicator stops blinking, but the charging
may continue until the battery is 100% charged.
Chapter 1. Product Overview
23
Note: If the computer is operating on battery power, the battery status indicator does not work while the
computer is turned off or is in sleep (standby) mode or hibernation mode.
• Quick blinking orange: An error occurred in the battery.
• The battery status indicator blinks three times: The ac power adapter is attached to the computer.
• The battery status indicator is off: The battery is fully charged or the battery is detached.
Locating important product information
This section provides information to help you locate your machine type and model label, FCC ID and IC
Certification label, and Windows Certificate of Authenticity.
Machine type and model label
The machine type and model label identifies your computer. If you contact Lenovo for help, the machine
type and model number will help support technicians to identify your computer and provide the highest
level of service.
You can find the machine type and model of your computer in the label as shown below:
ThinkPad X220 and X220i
24
User Guide
ThinkPad X220 Tablet and X220i Tablet
FCC ID and IC Certification number label
This section provides FCC ID and IC Certification number label location for your computer.
Chapter 1. Product Overview
25
ThinkPad X220 and X220i FCC ID and IC Certification number label
There is no FCC ID or IC Certification number for the PCI Express Mini Card shown on the enclosure of
your computer. The FCC ID and IC Certification number label is affixed on the card installed in the PCI
Express Mini Card slot of your computer.
If no integrated wireless PCI Express Mini Card has been preinstalled in your computer, you can install
one. To do this, follow the procedure in “Installing and replacing the PCI Express Mini Card for wireless
LAN/WiMAX connection” on page 133 or “Installing and replacing the PCI Express Mini Card for wireless
WAN connection” on page 139.
26
User Guide
ThinkPad X220 Tablet and X220i Tablet FCC ID and IC Certification number label
There is no FCC ID or IC Certification number for the PCI Express Mini Card shown on the enclosure of
your computer. The FCC ID and IC Certification number label is affixed on the card installed in the PCI
Express Mini Card slot of your computer.
If no integrated wireless PCI Express Mini Card has been preinstalled in your computer, you can install
one. To do this, follow the procedure in “Installing and replacing the PCI Express Mini Card for wireless
LAN/WiMAX connection” on page 133 or “Installing and replacing the PCI Express Mini Card for wireless
WAN connection” on page 139.
Certificate of Authenticity label
The Microsoft Certificate of Authenticity label for the preinstalled operating system is attached. Printed on this
label are the product ID and the product key information for your computer. Record this information and keep
it in a safe place. You might need these numbers to start your computer or reinstall the operating system.
The Windows Certificate of Authenticity of your computer is shown as below:
Chapter 1. Product Overview
27
ThinkPad X220 and X220i
ThinkPad X220 Tablet and X220i Tablet
28
User Guide
Features
This section provides features for your notebook computer.
ThinkPad X220 and X220i features
Processor
• See the system properties of your computer. You can do this as follows: Click Start, right-click Computer
(in Windows XP, My Computer); then from the pull down menu select Properties.
Memory
• Double data rate 3 (DDR3) synchronous dynamic random access memory
Storage device
• 2.5-inch (76 mm) solid state drive or 2.5-inch (64 mm) hard disk drive
• mSATA solid state drive (on some models)
Display
The color display uses TFT technology:
• Size: 12.5 inch (317.5 mm)
• Resolution:
– LCD: 1366-by-768
– External monitor: Up to 2560-by-1600
• LED backlight
• Brightness control
• ThinkLight
Keyboard
• 89-key, 90-key, or 94-key
• UltraNav (TrackPoint and multi-touch touch pad)
• Fn key function
• ThinkVantage button
• Volume control buttons
• Speaker mute button
• Microphone mute button
Interface
• External monitor connectors
• Combo audio jack (stereo headphone or headset)
• 3 Universal Serial Bus (USB) connectors
• RJ45 Ethernet connector
• ExpressCard slot
• 4-in-1 digital media card reader
• Docking connector
Chapter 1. Product Overview
29
• DisplayPort connector
Optical drive in ThinkPad X220 UltraBase
• DVD drive
• DVD Multi-Burner drive
Wireless features
• Integrated wireless LAN (on some models)
• Integrated Bluetooth (on some models)
• Integrated wireless WAN (on some models)
• Integrated WiMAX (on some models)
Security features
• Fingerprint reader (on some models)
ThinkPad X220 Tablet and X220i Tablet features
Processor
• See the system properties of your computer. You can do this as follows: Click Start, right-click Computer
(in Windows XP, My Computer); then from the pull down menu select Properties.
Memory
• Double data rate 3 (DDR3) synchronous dynamic random access memory
Storage device
• 2.5-inch (76 mm) solid state drive or 2.5-inch (64 mm) hard disk drive
• mSATA solid state drive (on some models)
Display
The color display uses TFT technology:
• Size: 12.5 inch (317.5 mm)
• Resolution:
– LCD: 1366-by-768
– External monitor: Up to 2560-by-1600
• LED backlight
• Brightness control
Keyboard
• 89-key, 90-key, or 94-key
• UltraNav (TrackPoint and multi-touch touch pad)
• Fn key function
• ThinkVantage button
• Volume control buttons
• Speaker mute button
• Microphone mute button
30
User Guide
Interface
• External monitor connectors
• Combo audio jack (stereo headphone or headset)
• 3 Universal Serial Bus (USB) connectors
• RJ45 Ethernet connector
• ExpressCard slot
• 4-in-1 digital media card reader
• Docking connector
• DisplayPort connector
Optical drive in ThinkPad X220 UltraBase
• DVD drive
• DVD Multi-Burner drive
Wireless features
• Integrated wireless LAN (on some models)
• Integrated Bluetooth (on some models)
• Integrated wireless WAN (on some models)
• Integrated WiMAX (on some models)
Security features
• Fingerprint reader (on some models)
Tablet features
• Tablet Digitizer Pen
• Touch panel (on select models)
Specifications
This section provides specifications for your computer.
ThinkPad X220 and X220i specifications
Size
• Width: 305.0 mm (12 inch)
• Depth: 206.5 mm (8.13 inch)
• Height: 19 to 26.6 mm (0.75 inch to 1.05 inch)
Environment:
• Maximum altitude without pressurization: 3048 m (10,000 ft)
• Temperature
– At altitudes up to 2438 m (8000 ft)
– Operating: 5.0° C to 35.0° C (41° F to 95° F)
– Non-operating: 5.0° C to 43.0° C (41° F to 109° F)
Chapter 1. Product Overview
31
– At altitudes above 2438 m (8000 ft)
– Maximum temperature when operating under the unpressurized condition: 31.3° C (88° F)
Note: When you charge the battery pack, its temperature must be at least 10 ° C (50 ° F).
• Relative humidity:
– Operating: 8% to 80%
– Non-operating: 5% to 95%
Heat output
• 65 W (222 Btu/hr) maximum or 90 W (307 Btu/hr) maximum, depending on the model
Power source (ac power adapter)
• Sine-wave input at 50 to 60 Hz
• Input rating of the ac power adapter: 100 to 240 V AC, 50 to 60 Hz
Battery pack
• Lithium-ion (Li-Ion) battery pack
Battery life
• For percentage of remaining battery power, see the Power Manager Battery Gauge in the task bar.
• The Power Manager also displays a green, yellow and red indication. A battery under warranty with a red
indication is eligible for a warranty replacement.
ThinkPad X220 Tabet and X220i Tablet specifications
Size
• Width: 305.0 mm (12 inch)
• Depth: 228.7 mm (9 inch)
• Height: 27 to 31.3 mm (1.06 inch to 1.23 inch)
Environment:
• Maximum altitude without pressurization: 3048 m (10,000 ft)
• Temperature
– At altitudes up to 2438 m (8000 ft)
– Operating: 5.0° C to 35.0° C (41° F to 95° F)
– Non-operating: 5.0° C to 43.0° C (41° F to 109° F)
– At altitudes above 2438 m (8000 ft)
– Maximum temperature when operating under the unpressurized condition: 31.3° C (88° F)
Note: When you charge the battery pack, its temperature must be at least 10 ° C (50 ° F).
• Relative humidity:
– Operating: 8% to 80%
– Non-operating: 5% to 95%
32
User Guide
Heat output
• 65 W (222 Btu/hr) maximum, or 90 W (307 Btu/hr) maximum, depending on the model
Power source (ac power adapter)
• Sine-wave input at 50 to 60 Hz
• Input rating of the ac power adapter: 100 to 240 V AC, 50 to 60 Hz
Battery pack
• Lithium-ion (Li-Ion) battery pack
Battery life
• For percentage of remaining battery power, see the Power Manager Battery Gauge in the task bar.
• The Power Manager also displays a green, yellow and red indication. A battery under warranty with a red
indication is eligible for a warranty replacement.
Operating environment
This section provides information about your computer operating environment.
Environment
• Maximum altitude without pressurization: 3048 m (10,000 ft)
• Temperature
– At altitudes up to 2438 m (8000 ft) Operating: 5.0°C to 35.0°C (41°F to 95°F) Non-operating: 5.0°C to
43.0°C (41°F to 109°F)
– At altitudes above 2438 m (8000 ft) Maximum temperature when operating under the unpressurized
condition: 31.3°C (88°F)
Note: When you charge the battery pack, its temperature must be at least 10°C (50°F).
• Relative humidity:
– Operating: 8% to 80%
– Non-operating: 5% to 95%
If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
Keep electrical appliances such as an electric fan, radio, high-powered speakers, air conditioner, and
microwave oven away from your computer because the strong magnetic fields generated by these
appliances can damage the monitor and data on the hard disk drive or solid state drive.
Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilled on
or in the computer or an attached device, a short circuit or other damage might occur.
Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.
ThinkVantage Technologies and software
Lenovo preinstalls on your PC useful and helpful software applications to help you get started, to stay
productive while on the move and to keep you and your computer working. Lenovo offers enhanced security,
wireless computing, data-migration and other solutions for your computer.
Chapter 1. Product Overview
33
Following sections provide information about ThinkVantage technologies and other computing solutions,
offered by Lenovo.
•
“Accessing applications in Windows 7” on page 34
•
“Access Connections” on page 36
•
“Active Protection System” on page 36
•
“Client Security Solution” on page 36
•
“Fingerprint Software” on page 36
•
“Lenovo ThinkVantage Tools” on page 37
•
“Lenovo ThinkVantage Toolbox” on page 37
•
“Message Center Plus” on page 37
•
“Password Manager” on page 37
•
“Power Manager” on page 38
•
“Presentation Director” on page 38
•
“Product Recovery” on page 38
•
“Rescue and Recovery” on page 38
•
“System Update” on page 38
•
“ThinkVantage GPS” on page 39
•
“Lenovo SimpleTap ” on page 39
•
“Lenovo ThinkVantage Tablet Shortcut Menu” on page 39
Note: To learn more about ThinkVantage technologies and other computing solutions, offered by Lenovo, go
to:
http://www.lenovo.com/support
Accessing applications in Windows 7
If you are using the Windows 7 operating system, you can access applications by following one of the
methods below:
• You can get the applications from the Lenovo ThinkVantage Tools.
Click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools. Then depending on the application you
want to access, double-click the corresponding icon.
Note: If an application icon in the Lenovo ThinkVantage Tools application navigation window is dimmed, it
indicates that you need to install the application manually. To install the application manually, double-click
the application icon. Then, follow the instructions on the screen. When the installation process completes,
the application icon will be activated.
Table 1. Applications on Lenovo ThinkVantage Tools
34
Application
Icon name
Access Connections
Internet Connection
Active Protection System
Airbag Protection
Fingerprint Software
Fingerprint Reader
Lenovo ThinkVantage Toolbox
System Health and Diagnostics
Mobile Broadband Activate
3G Mobile Broadband
Password Manager
Password Vault
User Guide
Table 1. Applications on Lenovo ThinkVantage Tools (continued)
Power Manager
Power Controls
Recovery Media
Factory Recovery Disks
Rescue and Recovery
Enhanced Backup and Restore
System Update
Update and Drivers
ThinkVantage GPS
GPS
Lenovo SimpleTap
Simple Tap
Lenovo ThinkVantage Tablet Shortcut Menu
Tablet Utility
• You can also get the applications from the Control Panel.
Click Start ➙ Control Panel. Depending on the application you want to access, click the corresponding
section and then click the corresponding green text.
Note: If you do not find the application you need in Control Panel, open the Lenovo ThinkVantage Tools
application navigation window and double-click the dimmed icon to install the application you need.
Then, follow the instructions on the screen. When the installation process completes, the application icon
will be activated, and you can find the application in Control Panel.
The sections in Control Panel, the green texts, and the applications are listed in the following table.
Table 2. Applications in Control Panel
Application
Control Panel section
Green text in Control Panel
Access Connections
Network and Internet
Lenovo - Internet Connection
Active Protection System
System and Security
Lenovo - Airbag Protection
Hardware and Sound
Communications Utility
Hardware and Sound
Lenovo - Web Conferencing
Fingerprint Software
System and Security
Lenovo - Fingerprint Reader
Hardware and Sound
or
Lenovo - notebook Fingerprint
Reader
Lenovo ThinkVantage Toolbox
System and Security
Lenovo - System Health and
Diagnostics
Mobile Broadband Activate
Network and Internet
Lenovo - 3G Mobile Broadband
Password Manager
System and Security
Lenovo - Password Vault
User Accounts and Family Safety
Power Manager
Hardware and Sound
Lenovo - Power Controls
System and Security
Recovery Media
System and Security
Lenovo - Factory Recovery Disks
System Update
System and Security
Lenovo - Update and Drivers
Rescue and Recovery
System and Security
Lenovo - Enhanced Backup and
Restore
ThinkVantage GPS
Network and Internet
Lenovo - GPS
System and Security
Note: Some applications might not be available in your system.
Chapter 1. Product Overview
35
Access Connections
Access Connections™ is a connectivity assistant program for creating and managing location profiles. Each
location profile stores all the network and Internet configuration settings needed for connecting to a network
infrastructure from a specific location such as a home or an office.
By switching between location profiles as you move your computer from place to place, you can quickly and
easily connect to a network with no need to reconfigure your settings manually and restart the computer
each time.
To open the Access Connections program, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista® and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Access
Connections.
Active Protection System
The Active Protection System protects your hard disk drive when the shock sensor inside your computer
detects a condition that could damage the drive, such as system tilt, excessive vibration, or shock. The hard
disk drive is less vulnerable to damage when it is not operating; so the system stops it from spinning, and
may also move the read/write heads of the drive to areas that do not contain data. As soon as the shock
sensor senses that the environment is stable again (minimal change in system tilt, vibration, or shock), it
turns the hard disk drive on.
To open Active Protection System, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Active Protection
System.
Client Security Solution
The Client Security Solution helps protect your computer and your personal information so that you know that
your sensitive data is secure. It can also help manage your passwords, help recover a forgotten password,
or help you monitor security settings on your computer and suggest how to enhance your computer security.
These convenient features are made more secure by a built-in security chip, a powerful computer chip
dedicated to the security functions of your computer.
To start the Client Security Solution, click Start ➙ All Programs ➙ ThinkVantage ➙ Client Security
Solution.
For details, refer to the Help for the program.
You can download the latest Client Security Solution at:
http://www.lenovo.com/support
Note: If your computer is a Windows 7 model, Client Security Solution is not preinstalled on it.
Fingerprint Software
If your system comes with a fingerprint reader, the Fingerprint Software program enables you to enroll your
fingerprint and associate it with your Windows password. As a result, the fingerprint authentication can
replace your password and enable simple and secure user access.
36
User Guide
To open the fingerprint software, do the following:
• Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ ThinkVantage
Fingerprint Software.
Lenovo ThinkVantage Tools
The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easy access
to various technologies, such as:
• Lenovo ThinkVantage Toolbox
• Power Manager
• Rescue and Recovery
• System Update
To access the Lenovo ThinkVantage Tools program, click Start ➙ All Programs ➙ Lenovo ThinkVantage
Tools.
Note: Lenovo ThinkVantage Tools is only available on computers preinstalled with Windows 7.
Lenovo ThinkVantage Toolbox
The Lenovo ThinkVantage Toolbox is a diagnostic program that works through the Windows operating
system. It enables you to view symptoms of computer problems and solutions for them, and includes
automatic notification when action is required, computing assistance, and advanced diagnostics and
diagnostic history.
For further information about diagnosing problems, see “Diagnosing problems using Lenovo ThinkVantage
Toolbox” on page 209.
To open Lenovo ThinkVantage Toolbox, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Lenovo
ThinkVantage Toolbox.
For additional information about running the Lenovo ThinkVantage Toolbox program, refer to the Lenovo
ThinkVantage Toolbox help system.
Message Center Plus
The Message Center Plus displays messages to inform you about helpful software that has been preinstalled
on your computer. The software enables you to manage wired and wireless connections, protect your data
in the event of a problem and automatically diagnose and resolve potential problems with your computer.
The Message Center Plus can also provide messages about new updates available to keep your computer
current.
Password Manager
The Password Manager program enables users to manage and remember all their sensitive and
easy-to-forget application and Web site login information, such as user IDs, passwords, and other personal
information.
To open Password Manager, do the following:
Chapter 1. Product Overview
37
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Password
Manager.
Power Manager
The Power Manager program provides convenient, flexible, and complete power management for your
computer. By using the Power Manager program, you can adjust your power settings to give you the best
balance between performance and power saving.
To open Power Manager, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Power Manager.
Product Recovery
This program enables you to create recovery media to restore the contents of the system drive or hard disk
drive to the same state as when the computer was originally shipped from the factory.
For information about how to open and use this program, refer to “Creating and using recovery media” on
page 109.
Presentation Director
Presentation Director is a display configuration utility that enables you to give presentations conveniently. It
also enables you to create and manage the display schemes. However, by default, Presentation Director has
some predefined presentation schemes. You can apply them to your presentation with no need to set up a
new scheme. To apply a presentation scheme, you can also use the Fn + F7 key combination.
To open Presentation Director, click Start ➙ All Programs ➙ ThinkVantage ➙ Presentation Director.
Note: If your computer is a Windows 7 model, Presentation Director is not supported because the Windows
7 operating system handles the external displays instead.
Rescue and Recovery
The Rescue and Recovery program is a one button recovery and restore solution that includes a set of
self-recovery tools to help you diagnose computer problems, get help, and recover from system crashes,
even if you cannot start the Windows operating system.
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Rescue and
Recovery.
System Update
The System Update program helps you keep the software on your computer up-to-date by downloading and
installing software packages (ThinkVantage applications, device drivers, UEFI BIOS updates, and other third
party applications). Some examples of software that you should keep updated are programs provided by
Lenovo, such as the Rescue and Recovery program.
To open the System Update, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ System Update.
38
User Guide
ThinkVantage GPS
If the PCI Express Mini Card installed in your computer supports GPS, your computer can receive signals
from GPS satellites and determine its location. If your computer is connected to the Internet, you can find
your location on a real-time map provided by Google Maps or Microsoft Bing™ Maps.
To open ThinkVantage GPS, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ ThinkVantage GPS.
For receiving the signals from GPS satellite, keep the following best usage guidelines in mind:
• Keep your notebook away from your body.
• GPS antenna is located under the LCD screen.
• Ensure that you place your notebook away from concrete or brick walls that may weaken satellite signals.
• Best reception will be available near windows and other locations where cellular phone reception is the
strongest.
The GPS satellite signals may not available at following area:
• Inside of tunnel or basement
• Inside of building or beside of building
• Between tall building
• Near the high-voltage electric cables
Note: For ThinkPad X220 Tablet and X220i Tablet, place your notebook on a flat surface and keep the
lid open at a 105 degree angle (notebook mode) .
Lenovo SimpleTap
Lenovo SimpleTap provides you a quick and customizable way to access your computer basic settings and
some personalized features.
To open the Lenovo SimpleTap, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista: Click Start ➙ All Programs ➙ ThinkVantage ➙ Lenovo SimpleTap.
Lenovo ThinkVantage Tablet Shortcut Menu
If your notebook is a tablet model, Lenovo ThinkVantage Tablet Shortcut Menu is available in your system.
The Tablet Shortcut Menu is a utility for your ThinkPad utility programs such as Access Connections,
Presentation Director and EasyEject Utility, for launching custom defined applications, for changing system
settings and for changing the focus from one window to another window.
You can use this utility to enable a function that makes your computer detect the state of the display
(notebook mode or tablet mode) and change the screen orientation automatically to suit your preference.
To open the Lenovo ThinkVantage Tablet Shortcut Menu, do the following:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista : Click Start ➙ All Programs ➙ ThinkVantage ➙ ThinkPad Tablet Shortcut Menu.
Chapter 1. Product Overview
39
40
User Guide
Chapter 2. Using your computer
Your computer is powerful and is loaded with features and applications. Use it to accomplish anything,
any day, any time.
This chapter contains the following topics:
•
“Register your computer” on page 41
•
“Frequently asked questions” on page 41
•
“Special keys and buttons” on page 48
•
“Using the UltraNav pointing device” on page 56
•
“Power management” on page 60
•
“Connecting to the network” on page 64
•
“Using a projector or external display ” on page 72
•
“Using audio features” on page 79
•
“Using an integrated camera” on page 80
•
“Using the ThinkLight feature” on page 81
•
“Using the media card reader” on page 81
Register your computer
When you register your computer, information is entered into a database, which enables Lenovo to contact
you in case of a recall or other severe problem. In addition, some locations offer extended privileges and
services to registered users.
When you register your computer with Lenovo, you will also receive the following benefits:
• Quicker service when you call Lenovo for help
• Automatic notification of free software and special promotional offers
Note: When you are ready to register by modem, you will need a phone connection to your computer and
access to the World Wide Web.
To register your computer with Lenovo, go to this Web site:
http://www.lenovo.com/register
Then follow the instructions on the screen.
Frequently asked questions
Here are a few tips that will help you optimize the use of ThinkPad notebook.
To ensure that you receive the best performance from your computer, browse the following Web page to find
information such as aids for troubleshooting and answers to frequently asked questions:
http://www.lenovo.com/support/faq.
Can I get my user guide in another language?
• To download the user guide in another language, go to: http://www.lenovo.com/support. Then follow
the instructions on the screen.
© Copyright Lenovo 2011
41
On the go and need to use battery power more effectively?
• To conserve power, or to suspend operation without exiting applications or saving files, see the
explanation about “power-saving modes” on page 61.
• To achieve the best balance between performance and power saving, create and apply power plans (in
Windows XP, power schemes) by use of Power Manager.
• If your computer will be turned off for an extended period of time, you can prevent battery power
from draining by removing the battery. Look for more information about using the battery in “Power
management” on page 60.
Concerned about security or need to securely dispose of data stored on your hard disk or solid
state drive?
• Study the Chapter 4 “Security” on page 91 section to find out how you can protect your computer from
theft and unauthorized use.
• The Client Security Solution preinstalled on your computer performs many of the security tasks that help
protect it. If the setup wizard runs, to keep your secure, be sure to set up the Client Security Solution.
Note: If your computer is a Windows 7 model, Client Security Solution is not preinstalled on it.
• Before you dispose of the data on the hard disk drive or the solid state drive, be sure to read “Notice on
deleting data from your hard disk or solid state drive” on page 107.
Getting connected in different locations is a challenge?
• To troubleshoot a wireless networking issue, go to:
http://www.lenovo.com/support/faq
• Take advantage of the networking features by use of Access Connections.
• To learn more about using the wireless features of your computer, refer to “Wireless connections” on
page 64.
• To travel more confidently, be sure to check the tips in “Traveling with your computer” on page 88.
• Press Fn+F5, or use the wireless radio switch to enable or disable the wireless features.
Need to give presentations or attach an external monitor often?
• Use Presentation Director to set up a presentation.
Note: If your computer is a Windows 7 model, it does not support Presentation Director, however the
Fn+F7 key combination may still be used to switch display output location.
• Make sure that you follow the procedure for “Attaching an external monitor” on page 73.
• With the Extend desktop function, you can display output on both the computer display and the external
monitor.
Need to attach or replace a device?
• See Chapter 6 “Replacing devices” on page 117 for more information about replacing the devices of
your computer.
• See Chapter 7 “Enhancing your computer” on page 151 for more information about enhancing the
features of your computer.
You've been using your computer for some time already, and it is getting slower?
• Follow the “General tips for preventing problems” on page 203.
• You can diagnose problems yourself by using the preinstalled software.
42
User Guide
• Also Recovery tool is provided on your computer hard disk or solid state drive. For more information,
see Chapter 5 “Recovery overview” on page 109.
Print the following sections and keep them with your computer in case you are unable to access this
online help when necessary.
•
“Installing a new operating system” on page 175
•
“Computer stops responding” on page 210
•
“Power problems” on page 232
Tablet mode
ThinkPad X220 Tablet or X220i Tablet notebook can be used in tablet mode, taking advantage of the features
and benefits of a tablet PC.
Using the tablet mode
In the tablet mode, you can use your computer in a creative and intuitive way by jotting down notes and
illustrations with the Tablet Digitizer Pen and then storing them digitally.
To use your computer in the tablet mode, do as follows:
1. Open the computer display slowly, holding the upper left and right sides of the display with both hands.
Your computer is now in the notebook mode.
2. Open the display by at least 45 degrees, preferably by 90 degrees. Grasp the center of one side of the
computer display with one hand while holding the keyboard bezel with the other hand; then rotate the
display slowly clockwise until the back of the display is facing the keyboard. Your computer is now
in the picture frame mode.
Note: While rotating the display, do not press the upper edge of either side of the display.
Chapter 2. Using your computer
43
3. Close the computer display slowly, holding the upper left and right sides with both hands.
Note: Make sure that the display is rotated at 180 degrees, so that the back of the display faces the
keyboard.
4. Press the center latch down to lock the display.
Note: Do not rotate, twist, or bend the center latch of the display.
Your computer is now in the tablet mode.
To return your computer to the notebook mode, do as follows:
44
User Guide
1. Open the display by at least 45 degrees, preferably by 90 degrees.
2. Follow the direction shown by the display swivel indicator and rotate the display slowly (figure below
shows counter-clockwise rotation as an example) until the front of the display is facing the keyboard.
Your computer is now in the notebook mode.
Tips on using your computer in the tablet mode
• To close the computer display, first make sure that the display either faces the keyboard or is positioned
at 180 degrees to the keyboard, so that the back of the display faces the keyboard.
• Do not pick up or hold the computer by the display only.
• Do not hit, vibrate, or bump the computer display.
• To allow free ventilation, do not place any obstacle, such as a thick-piled carpet or a soft cushion, in
front of the fan.
• When you use the computer in the picture frame mode, hold the display with one hand and use the
Tablet Digitizer Pen.
• If you hold the computer with one hand while using it in the tablet mode, do not expose it to excessive
vibration, shock, or rotation.
• When using computer outdoors protect against exposure to rain or moisture.
• If you put your computer in a carrying case, put it into notebook mode and close the display.
Using the Tablet Digitizer Pen
The Tablet Digitizer Pen and its accessories are shipped in a separate box within the ThinkPad shipping box.
You can use the pen to control your computer just as you would with a mouse or keyboard.
Note: This pen is not waterproof. Take care not to soak it or dip it in water.
You can store the pen in the slot on the right side of the ThinkPad Notebook. Press it gently into the slot
until you hear a click.
Chapter 2. Using your computer
45
To remove the pen from its slot, press it gently into the slot 1 to release it; then pull it out 2 .
Note: The pen contains pressure sensors. Do not push the tip of the pen for an extended period of time. Do
not subject the pen to shock or vibration.
The Tablet Digitizer Pen consists of a tip 2 , a click button 3 , and an eraser tip 4 . Hold the pen and point the
tip at the display to move the cursor 1 .
To make a selection (single click), tap the display once with the pen. To double-click, tap twice without
pausing. To do a right-click, tap the display once and then hold the tip of the pen on the display; the
right-click icon appears.
Pressing the click button 3 is the same as a right-click. The eraser tip 4 functions like an eraser in
applications that support this function.
Using the touch panel
Some models have the touch panel feature. This feature makes interaction with your computer even more
natural, because you can use fingers instead of a pen for navigation on the go.
46
User Guide
For a single click, tap the display once with your finger. For a double click, tap the display twice without
pausing. For a right click, tap the display once and then hold your finger on the display until a circular symbol
appears. When you take your finger off the display, the right-click menu will open.
Using the multitouch panel
On a model that has the multitouch panel feature, the touch panel supports multitouch, with which you can
zoom in, zoom out, scroll, or rotate on the screen with your two fingers while browsing the Internet or
reading or editing a document.
The multitouch panel supports the capacitive touch. Even the slightest contact of your electron-rich finger
with the screen's glass is enough to activate the capacitive sensing system. This function does not work
with inanimate objects, fingernails, gloved fingers. Advanced palm-rejection technology helps to prevent
inadvertent contact with a pen or a finger, which could disrupt finger input.
Tips on using the touch panel
• The touch panel is a glass panel covered with a plastic film. For input you can use either your finger or the
Tablet Digitizer Pen shipped with your computer. Do not use any pen other than the specified one, or any
metallic object, because to do so might damage the touch panel or cause it to malfunction.
• If you put your computer in a carrying case, put it into notebook mode and close the display. Do not
carry your computer in tablet mode.
• If you use both your finger (or two fingers) and the Tablet Digitizer Pen simultaneously for input to the
screen, only data entered by use of the Digitizer Pen will be processed.
• With the touch panel, gradually a discrepancy may start to appear between the point you touch with your
finger (or two fingers) during the finger point, and its actual position on the screen. To avoid this, regularly
correct the accuracy of the finger input by use of the touch panel Settings Utility.
• If your computer is the multitouch model, the touch panel of your computer supports multitouch with
which you can:
– Pinch two fingers together or apart to zoom in or out on a document.
– Scroll window contents by moving two fingers up and down, left and right.
– Touch two points on a digital photo and twist to rotate it just like a real photo.
Cleaning the touch panel display
1. To remove fingerprints, etc., from the touch panel display, use a dry, soft, lint-free cloth or a piece of
absorbent cotton. Do not apply solvents to the cloth.
2. Gently wipe foreign particles and dust from the touch panel with one side of the cloth.
3. Wipe smudges or fingerprints with the other side of the cloth, or with a clean cloth.
4. After using the cloth, wash it with a neutral detergent.
Using the Tablet buttons
On the display bezel near the screen is a row of buttons with which you can control your computer in
the tablet mode, without the use of the keyboard.
Chapter 2. Using your computer
47
1
Press the Screen Rotation button button to rotate the screen clockwise.
The Secure Attention Sequence button functions the same as the Ctrl+Alt+Del key combination.
Press the power button button to turn the computer on or off.
Using the Tablet Shortcut Menu
Tablet Shortcut Menu is a software tool bar that is optimized for use when your computer is in the tablet
mode. From this menu you can adjust certain system settings and start the ThinkPad utility programs, such
as Access Connections and Presentation Director. The menu also provides functions that are useful in the
tablet mode, such as changing the screen orientation automatically for different positions of the computer,
disabling the Beam Forming feature automatically in tablet mode, or resuming the system from standby
when the Tablet Digitizer Pen is removed from its slot.
To start the Tablet Shortcut Menu, press the “Using the Tablet buttons” on page 47 on the computer display
bezel, using either the Tablet Digitizer Pen or your finger. The main panel appears on the screen.
There is another way to open the main panel.
For Windows 7: Click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Tablet Utility.
For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Tablet Shortcut
Menu.
For details, refer to the Help in the Tablet Shortcut Menu.
Special keys and buttons
Your computer has several special keys and buttons.
48
User Guide
ThinkVantage button
The blue ThinkVantage button can help you in many situations when your computer is working normally,
and even when it is not.
You can also use the ThinkVantage button to interrupt the startup sequence of your computer and start the
Rescue and Recovery workspace, which runs independently of the Windows operating system and is hidden
from it. If Windows is not running properly, you may need to do the following:
• Get the current system information.
• Rescue a file from your Windows environment or restore back-up files, provided you have made backups
by use of the Rescue and Recovery program.
• Configure your computer or start the ThinkPad Setup.
All this can be achieved from the Rescue and Recovery workspace. Turn on the computer; then, while the
“To interrupt normal startup, press the blue ThinkVantage button” message is displayed at the lower-left of
the screen, press the ThinkVantage button. The Rescue and Recovery screen opens.
Numeric keypad
The keyboard has keys that, when enabled, work as a 10-key numeric keypad.
Chapter 2. Using your computer
49
To enable or disable the numeric keypad, press and hold Shift or Fn and then press NmLk (ScrLk).
Note: The next drawing shows the locations of the keys that serve as the 10-key numeric keypad. The
locations of these keys are the same on every keyboard, though for computers using different languages,
different characters are printed on the keytops.
If the numeric keypad is enabled, press and hold Shift to use the cursor-control and screen-control keys
temporarily.
Note: The functions of the cursor- and screen-control keys are not printed on the keys.
50
User Guide
Function key combinations
By setting the function keys, you can change operational features instantly. To use this function, press and
hold the Fn key 1 ; then press one of the function keys 2 .
Power conservation
• Fn+F3
Select a power plan (in Windows XP, power scheme) that has been created by Power Manager, or adjust
the power level by using the slider control. When you press this combination of buttons, a panel for
selecting a power plan (in Windows XP, power scheme) or adjusting the power level appears.
Note: If you have logged on with an administrator user ID in Windows XP, and you press Fn+F3, the panel
for selecting a power scheme appears. If you have logged on with another user ID in Windows XP,
and you press Fn+F3, the panel does not appear.
• Fn+F4
Put your computer in sleep (standby) mode. To return to normal operation, press the Fn key only, without
pressing a function key.
Note: If you want to use the combination to put the computer into hibernation mode or do-nothing mode
(in Windows XP, shut the computer down or show the panel for turning off the computer), change the
settings in Power Manager.
• Fn+F12
Put your computer in hibernation mode. To return to normal operation, press the power button for less
than four seconds.
Notes:
– Though the screen fades out immediately after Fn+F12 are pressed, the computer does not enter the
hibernation mode immediately. Do not move the system until the Status indicators stops blinking.
Moving the computer when it is entering hibernation may cause corruption of the hard drive.
Chapter 2. Using your computer
51
– To use Fn+F3, Fn+F4, and Fn+F12 key combinations, you must have the ThinkPad PM device driver
installed on your computer.
For information on the power management function, refer to “Power management” on page 60.
Applying a presentation scheme
• Fn+F7
Apply a presentation scheme directly, with no need to start Presentation Director.
To disable this function and use the Fn+F7 key combination for switching a display output location, start
Presentation Director, and change the settings.
Click Start ➙ All Programs ➙ ThinkVantage ➙ Presentation Director.
For information on applying a presentation scheme, refer to “Presentation Director” on page 38.
Note: If your computer is a Windows 7 model, it does not support presentation schemes, however the
Fn+F7 key combination may still be used to switch display output location.
Switching a display output location
• Fn+F7
For Windows 7:
Switch between the computer display and an external monitor. Windows will show these display options:
– Computer display only (LCD)
– Computer display and external monitor (same image)
– Computer display and external monitor (extended desktop function)
– External monitor only
Note: To switch between the computer display and an external monitor, the Win+P key combination
is also available.
For Windows Vista and Windows XP:
Switch between the computer display and an external monitor. If an external monitor is attached,
computer output is displayed in the following three patterns by turns:
– External monitor (CRT display)
– Computer display and external monitor (LCD + CRT display)
– Computer display
Notes:
– This function is not supported if different desktop images are displayed on the computer display and
the external monitor (the Extend desktop function).
– This function does not work while a DVD movie or a video clip is playing.
To enable this function, start Presentation Director, and change the settings.
Note: Multiple users can log on to a single operating system by using different user IDs. Each user
needs to do the following:
Click Start ➙ All Programs ➙ ThinkVantage ➙ Presentation Director, and change the Fn+F7 Settings.
Enabling or disabling the wireless features
• Fn+F5
Enable or disable the built-in wireless networking features. If you press Fn+F5, a list of wireless features is
displayed. You can quickly change the power state of each feature in the list.
52
User Guide
Notes: If you want to use Fn+F5 to enable or disable the wireless features, the following device drivers
must be installed on your computer beforehand:
– Power Management driver
– OnScreen Display Utility
– Wireless device drivers
For information on the wireless features, refer to “Wireless connections” on page 64.
Launching the camera and audio settings
• Fn+F6
If you press Fn+F6, the camera and audio settings window is opened and the camera preview is turned on.
From this window, you can change the camera and audio settings.
Note: The Camera settings area only appears if your computer has an integrated camera. For more
information, see “Using an integrated camera” on page 80.
Other functions
• Fn+PgUp: Turn the ThinkLight on. To turn it off, press Fn+PgUp again.
Note: This function is supported only on the ThinkPad notebooks that have the ThinkLight. The on or off
status of the ThinkLight is shown on the screen for a few seconds when you press Fn+PgUp.
• Fn+Home: The computer display becomes brighter.
The purpose of this method is to change the brightness level temporarily. On Windows Vista, the default
brightness level is loaded after sleep (standby), hibernation, reboot, or detaching or attaching an ac
power adapter. To change the default brightness level, change the settings of the Power Option in the
Control Panel or use the Power Manager.
• Fn+End: The computer display becomes dimmer.
The purpose of this method is to change the brightness level temporarily. On Windows Vista, the default
brightness level is loaded after sleep (standby), hibernation, reboot, or detaching or attaching an ac
power adapter. To change the default brightness level, change the settings of the Power Option in the
Control Panel or use the Power Manager.
• Fn+Spacebar: Enable the FullScreen Magnifier function.
• Fn+F2: Lock your computer.
• Fn+F8: Change the settings of the UltraNav pointing device.
• Fn+PrtSc: Have the same function as the SysRq key.
• Fn+ScrLk: Enable or disable the numeric keypad. The indicator of numeric lock is displayed on the
screen.
• Fn+Pause: Have the same function as the Break key.
• Fn+cursor keys: These key combinations are for use with Windows Media Player. They have the
following functions:
– Fn + down arrow key: Play or Pause
– Fn + up arrow key: Stop
– Fn + right arrow key: Next Track
– Fn + left arrow key: Previous Track
Chapter 2. Using your computer
53
Volume and mute buttons
You can adjust the sound level of the built-in speakers by using the following three buttons:
If you mute the sound and then turn off your computer, the sound will remain muted when you turn on your
computer again. To turn on the sound, press the plus (+) or minus (-) button.
Setting the volume
Each device has volume controls, which you can set.
To open the window for adjusting the output volume or the recording volume, do the following:
For Windows 7 and Windows Vista:
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Sound. The Sound window appears.
2. Click the Playback tab or Recording tab, and then click a device, which you want to customize.
3. Click the Properties button.
4. Click the Levels tab, and then change the volume by moving the slider.
For Windows XP:
1. Click Start ➙ Control Panel ➙ Sounds, Speech, and Audio Devices ➙ Sounds and Audio Device.
The Sounds and Audio Device Properties window appears.
2. Click the Audio tab, and then click the Volume button in Sound Playback or Sound Recording.
Notes:
• You can also get access to the desktop volume control by using the volume icon in the task bar at the
lower right of the screen. To open the Volume Control window, click the volume icon. To control the
volume, move the volume control slider up or down. To turn off the sound, select Mute speakers (in
Windows Vista and Windows XP, Mute).
• The names of windows or fields are slightly different depending on the operating system you use.
54
User Guide
• For details about controlling volume, refer to your Windows online help.
Setting the microphone mute button in Windows 7 and Windows Vista
By default, you can toggle all of your recording devices between the mute state and the un-mute state by
pressing the microphone mute button.
If you want to toggle one of the recording devices between the mute state and the un-mute state, do
the following:
1. Press Fn+F6. The Communications settings window opens.
2. Click the Manage Settings button. The Communications Utility window opens.
3. On the VoIP Call Settings tab, click Microphone mute button settings. The Setting for Microphone
Mute window opens.
4. Select Only the recording device selected below:. Then select the recording device from the
drop-down list box.
5. Click OK.
Windows key and Application key
The following two keys are on your computer keyboard:
Windows key
If you press this key, the Start menu of Windows is displayed or hidden.
If you press this key and another key at the same time, the System Properties window or the Computer (in
Windows XP, My Computer) window is displayed. For details, refer to the Help in Windows operating system.
Application key
Chapter 2. Using your computer
55
To display the shortcut menu for an object, select the object on the desktop or within an application and
then press this key.
Using the UltraNav pointing device
Your computer may come with the UltraNav pointing device. The UltraNav consists of the TrackPoint and
the touch pad, each of which is itself a pointing device with both basic and extended functions. You can
configure both devices by choosing the settings you prefer as follows:
• Set both the TrackPoint and the touch pad as pointing devices.
This setting enables the use of all the basic and extended functions of the TrackPoint and the touch pad.
• Set the TrackPoint as the main pointing device and the touch pad for extended functions only.
This setting enables the use of all basic and extended functions with the TrackPoint while limiting the use
of the touch pad to scrolling, tap zones, and slow-motion pointer functions.
• Set the touch pad as the main pointing device and the TrackPoint for the extended functions only.
This setting enables the use of all basic and extended functions with the touch pad while limiting the
use of the TrackPoint to scrolling and Magnifying Glass functions.
• Set the TrackPoint as the main pointing device, and disable the touch pad.
• Set the touch pad as the main pointing device, and disable the TrackPoint.
Changing the UltraNav settings
You can change your settings of UltraNav in the UltraNav tab of the Mouse Properties window. To open it,
use one of the following methods:
• Press Fn+F8, and the UltraNav Device Settings window is displayed. In this window click Manage
Settings. A mouse properties window is displayed. Click the UltraNav tab.
• Use the Start menu of your computer as follows:
– For Windows 7 and Windows Vista: Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse
➙ UltraNav tab.
– For Windows XP: Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse ➙
UltraNav tab.
You can also change the UltraNav settings by clicking the UltraNav icon on the system tray. To display the
UltraNav icon on the system tray, see “Adding the UltraNav icon to the system tray” on page 59.
Using the TrackPoint pointing device
The TrackPoint pointing device consists of a pointing stick (1) on the keyboard and three click buttons at the
bottom of the keyboard. To move the pointer (5) on the screen, you apply pressure to the nonslip cap on the
pointing stick in any direction parallel to the keyboard; the pointing stick itself does not move. The speed at
which the pointer moves depends on the pressure you apply to the pointing stick. The functions of the left (4)
and right (2) click buttons correspond to those of the left and right mouse buttons on a conventional mouse.
The TrackPoint center button (3), called the scroll bar, enables you to scroll Web pages or documents in any
direction with no need to use the graphic scroll bars on the side of the window.
56
User Guide
If you are not familiar with the TrackPoint, these instructions will help you get started:
1. Place your hands in the typing position, and press gently with either index finger on the pointing stick in
the direction in which you want the pointer to move.
To move the pointer, press the pointing stick away from you to move it up, toward you to move it
down, to one side or the other to move it sideways.
Note: The pointer might drift. This is not a defect. Stop using the TrackPoint for a few seconds; the
pointer will stop moving.
2. To select and drag as required by your software, press the left or right click button with either thumb
and move the TrackPoint pointing stick.
By enabling Press-to-Select, you can make the TrackPoint pointing stick function the same as the
left or right click button.
Customizing the TrackPoint
You can customize the TrackPoint pointing device and its buttons as follows:
• Switch the functions of the left and right buttons.
• Change the sensitivity of the TrackPoint.
• Enable the Press-to-Select function.
• Enable the Magnifying Glass.
• Enable the TrackPoint scrolling function.
• Enable the TrackPoint Scrolling Tips.
To customize the TrackPoint, do as follows:
1. Press Fn+F8. A panel for UltraNav Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab. Under TrackPoint, proceed to changing the settings.
For details, refer to the Help in the Utility.
Changing the cap
The cap 1 on the end of the TrackPoint pointing stick is removable. You can replace it as shown in
the drawing.
Chapter 2. Using your computer
57
Note: If you replace the keyboard, a new keyboard is shipped with the default cap. If you wish, you can
keep the cap from your old keyboard and use it on the new one.
Using the touch pad
The touch pad is below the TrackPoint buttons at the bottom of the keyboard. To move the pointer 2 on the
screen, slide your fingertip over the pad in the direction in which you want the pointer to move. The left
and right bottom of the pad work as click buttons. The functions correspond to those of the left and right
mouse buttons on a conventional mouse.
Using the multi-touch touch pad
The touch pad of your computer supports multi-touch with which you can zoom in, zoom out, scroll or rotate
on the screen while browsing the Internet or reading or editing a document.
For details, refer to the Help in the UltraNav.
Customizing the touch pad
To customize the touch pad, do as follows:
1. Press Fn+F8. A panel for UltraNav Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
58
User Guide
3. Click the UltraNav tab and proceed to customizing the touch pad.
For details, refer to the Help in the Utility.
Behavior of the UltraNav and an external mouse
By default, the TrackPoint and the touch pad are set to Enabled.
Note: If you want to attach an external mouse to a USB connector, select “Disabled.”
Disabling the TrackPoint or the touch pad
If you want to disable the TrackPoint or the touch pad, do either of the following:
• Use the Fn+F8 key combination:
1. Press Fn+F8. A panel for UltraNav Device Settings pops up.
2. To disable the TrackPoint, select Enable touch pad only (disable TrackPoint).
To disable the touch pad, select Enable TrackPoint only (disable touch pad).
3. Click Close.
• Configure settings in UltraNav properties window:
For Windows 7 and Windows Vista
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse.
2. Click UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
For Windows XP
1. Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse.
2. Click UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
Note: You can also open the UltraNav properties window by clicking the UltraNav icon in the task bar. For
details, refer to the instructions in “Adding the UltraNav icon to the system tray” on page 59.
Adding the UltraNav icon to the system tray
For easy access to the UltraNav properties, you can add the UltraNav icon on the system tray.
To enable the display of the UltraNav icon on the system tray, do as follows:
1. Press Fn+F8. A panel headed UltraNav Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab.
4. Select the check box for Show UltraNav icon on the system tray.
5. Click OK or Apply.
6. If your computer is a Windows 7 model, click Show hidden icons in the task bar. The UltraNav icon is
displayed. To add it to the task bar permanently, click Customize and proceed to customize the settings.
Chapter 2. Using your computer
59
You can now change the properties of UltraNav by clicking the UltraNav icon on the system tray.
Power management
When you need to use your computer away from electrical outlets, you depend on battery power to keep
your computer running. Different computer components consume power at different rates. The more you
use the power-intensive components, the faster you consume battery power.
Do more, save more and spend more time unplugged with ThinkPad batteries. Mobility has revolutionized
business by allowing you to take your work where ever you go. With ThinkPad batteries, you will be able to
work longer without being tied to an electrical outlet.
Checking battery status
The Power Manager Battery Gauge in the task tray displays the percentage of battery power remaining.
The rate at which you use battery power will determine how long you can use the battery of your computer
between charges. Because each computer user has different habits and needs, it is difficult to predict how
long a battery charge will last. There are two main factors:
• How much energy is stored in the battery when you begin to work.
• The way you use your computer: how often you access the hard disk drive or the solid state drive, how
bright you make the computer display.
Using the ac power adapter
The power to run your computer can come either from the lithium-ion (Li-ion) battery pack provided with it,
or from ac power through the ac power adapter. While you use ac power, the battery charges automatically.
The ac power adapter that comes with your computer has two basic components:
1. The transformer pack that converts ac power adapter for use with the computer.
2. The power cord that plugs into the AC outlet and into the transformer pack.
Attention: Using an improper power cord could cause severe damage to your computer.
To use the ac power adapter, do the following. Be sure to take these steps in the order in which they are
given here.
1. Connect the ac power adapter to the power jack of the computer.
2. Connect the power cord to the transformer pack.
3. Plug the power cord into an electrical outlet.
You can check the status of your battery at any time by looking at the battery meter at the bottom of your
display.
Notes:
• When the ac power adapter is not in use, disconnect it from the electrical outlet.
• Do not bind the power cord tightly around the ac power transformer pack when it is connected to the
transformer.
• You can charge the battery when the ac power adapter is connected to the computer and the battery is
installed. You need to charge it in any of the following conditions:
– When you purchase a new battery.
– If the battery status indicator starts blinking.
60
User Guide
– If the battery has not been used for a long time.
Before you charge the battery, make sure that its temperature is at least 10°C (50°F).
Charging the battery
When you check battery status and find that the percentage of power remaining is low or when the power
alarm alerts you that remaining power is low, you need to charge your battery or replace it with a charged
battery.
If an ac outlet is convenient, plug the ac power adapter into it, and then insert the jack into the computer.
The battery will charge in about three to six hours. This is affected by the battery size and the physical
environment. The battery status indicator will let you know that the battery is charging, and will also notify
you when the battery is fully charged.
Note: To increase the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.
Maximizing battery life
To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted-until the battery status indicator starts blinking
orange.
• Recharge the battery completely before using it. The battery is fully charged if the battery indicator shows
green when the ac power adapter is plugged in.
• For a new battery or a battery that you have not used recently, do one of the following:
1. Recharge the battery completely before using it. The battery is fully charged when the ac power
adapter is plugged in and the battery indicator is green.
2. Use the battery until the charge is completely depleted-until the battery status indicator starts
blinking orange.
• Always use power management features such as power modes, screen blank, sleep (standby), and
hibernation.
Managing your battery power
With Power Manager, you can adjust your power settings to give you the best balance between performance
and power saving.
To start the utility program, do as follows:
• For Windows 7: See “Accessing applications in Windows 7” on page 34.
• For Windows Vista and Windows XP: Click Start ➙ All Programs ➙ ThinkVantage ➙ Power Manager.
For more information about the Power Manager program, refer to the on-line help of the program.
Power-saving modes
There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of the battery power.
Introducing the power-saving modes
• Screen blank. The computer display requires considerable battery power. To turn off power to the
display, do as follows:
1. Press Fn+F3. A panel for selecting a power plan (in Windows XP, power scheme) appears.
Chapter 2. Using your computer
61
2. Select Power off display (keep current power plan) (in Windows XP, keep current power scheme).
Notes: You can also turn off the computer display as follows:
1. Press Fn+F3. A panel for selecting a power plan (in Windows XP, power scheme) appears.
2. Select Fn+F3 Settings.
3. Select Power off display.
4. Click OK. The next time you press Fn+F3, you can turn off the computer display.
• Sleep (standby in Windows XP). In sleep (standby) mode, your work is saved to memory, and then the
solid state drive or the hard disk drive and the computer display are turned off. When your computer
wakes up, your work is restored within seconds.
To put your computer into sleep (standby) mode, press Fn+F4. To return from sleep (standby) mode,
press the Fn key.
• Hibernation. By using this mode, you can turn off your computer completely without saving files or
exiting from any applications that are running. When you enter hibernation, all open applications, folders,
and files are saved to the hard disk, and then the computer turns off. To enter hibernation, press Fn+F12.
To resume your session, press the power button for no more than 4 seconds.
When you are not using the wireless features, such as Bluetooth or wireless LAN, turn them off. This will
help conserve power. To turn off the wireless features, press Fn+F5.
Enabling the wakeup function
If you put your computer into hibernation mode, and the wakeup function is disabled (this is the default
setting), the computer does not consume any power. If the wakeup function is enabled, it consumes a small
amount of power. To enable the function, do as follows:
For Windows 7 and Windows Vista:
1. Click Start ➙ Control Panel ➙ System and Security (in Windows Vista, System and Maintenance).
2. Click Administrative Tools.
3. Click Task Scheduler. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the left pane, select the task folder for which you want to enable the wakeup function. The
scheduled tasks are displayed.
5. Click a scheduled task, and then click the Conditions tab.
6. Under Power, select the check box for Wake the computer to run this task.
For Windows XP:
1. Click Start ➙ Control Panel ➙ Performance and Maintenance.
2. Click Scheduled Tasks. The scheduled tasks are displayed.
3. Right-click on a scheduled task.
4. Click Properties.
5. Click the Settings tab.
6. Under Power Management, select the check box for Wake the computer to run this task.
Enabling the battery alarm
You can program your computer so that when the battery power falls below a certain level, three events
occur: the alarm goes off, a message is displayed, and the LCD is turned off. Do as follows:
1. Start Power Manager.
62
User Guide
2. Click the Global Power Settings tab.
3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and set
the action.
Note: If your computer enters sleep (standby) or hibernation mode when the battery is low, but the alarm
message has not yet appeared, the message will appear when the computer resumes. To resume normal
operation, press OK.
Handling the battery
DANGER
Do not attempt to disassemble or modify the battery pack.
Attempting to do so can cause an explosion, or liquid leakage from the battery pack.
A battery pack other than the one specified by Lenovo, or a disassembled or modified battery
pack is not covered by the warranty.
DANGER
If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The battery
pack contains a small amount of harmful substances. To avoid possible injury:
• Replace only with a battery of the type recommended by Lenovo.
• Keep the battery pack away from fire.
• Do not expose it to excessive heat.
• Do not expose it to water or rain.
• Do not short-circuit it.
• Store it in a cool dry place.
• Keep it away from children.
The battery pack is a consumable supply.
If your battery begins to discharge too quickly, replace the battery pack with a new one of the type
recommended by Lenovo. For more information on replacing the battery pack, contact your Customer
Support Center.
DANGER
Do not drop, crush, puncture, or subject to strong forces. Battery abuse or mishandling can cause
the battery to overheat, which can cause gasses or flame to “vent” from the battery pack or coin
cell. If your battery is damaged, or if you notice any discharge from your battery or the buildup
of foreign materials on the battery leads, stop using the battery and obtain a replacement from
the battery manufacturer.
Chapter 2. Using your computer
63
DANGER
Only recharge the battery pack strictly according to instructions included in the product
documentation.
DANGER
Do not put the battery pack in trash that is disposed of in landfills. When disposing of the battery,
comply with local ordinances or regulations and your company's safety standards.
DANGER
There is a danger of an explosion if the backup battery is incorrectly placed. The lithium battery
contains lithium and can explode if it is not properly handled, or disposed of. Replace only with a
battery of the same type. To avoid possible injury or death, Do not: (1) throw or immerse into water,
(2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose of
it as required by local ordinances or regulations and your company's safety standards.
Connecting to the network
Your computer has one or more network adapters for connecting to the Internet and to your company's
wired LAN or wireless LAN network.
Note: Some models come with a built-in wireless WAN card enabling you to establish wireless connections
over remote public or private networks.
“Access Connections” on page 36 is a connectivity assistant program for creating and managing location
profiles. Each location profile stores all the network and Internet configuration settings needed for connecting
to a network infrastructure from a specific location such as a home or an office.
Your modem enables you to connect to your network or the Internet from almost anywhere. If your network
has a phone line or lines dedicated to dial-up clients, you can use a modem to establish a connection to the
LAN. If your network does not have dial-up networking capability (and many do not), you might be able to
access some information and e-mail over the Internet.
Ethernet connections
You can connect to your network or a broadband connection, such as DSL or CATV, by use of the Ethernet
feature built into your computer. This feature enables you to do 1Gbps half or full duplex data transmission.
To connect to a network via Ethernet, you can use Access Connections.
Note: Your computer might have both a modem connector and an Ethernet connector. Be sure to connect
your cable to the correct one.
Wireless connections
Wireless connection is the transfer of data without the use of cables by means of radio waves only.
Depending on the frequency used for data transmission, the area covered, or the type of the device used for
data transfer, the following categories of wireless networks may be available to you:
64
User Guide
Wireless LAN
A wireless local area network covers a relatively small geographic area, such as an office building or a house.
Devices based on the 802.11 standards can connect to this network.
Wireless WAN
A wireless wide area network covers a broader geographic area. Cellular networks are used for data
transmission, and access is provided by a wireless service carrier.
Bluetooth
One of a number of technologies used to create a wireless personal area network. Bluetooth can connect
devices a short distance from one another, and is commonly used for connecting peripheral devices to a
computer, transferring data between hand-held devices and PC, or remotely controlling and communicating
with devices such as mobile phones.
WiMAX (Worldwide Interoperability for Microwave Access)
This long-range wireless data transmission technology based on the 802.16 standard, is expected to provide
the user a “last mile” broadband connectivity similar to that provided by cable or ADSL, but without the need
to physically connect a cable to the PC.
Making wireless LAN connections
Your computer comes with a built-in wireless networking card and a configuration utility to help you make
wireless connections and monitor the status of your connection, so that you can stay connected to your
network while you are in the office, in a meeting room, or at home, with no need for a wired connection.
Attention:
• If you carry your computer with the wireless LAN feature into an airplane, check the services with the
airline before boarding the airplane.
• If there are restrictions on the use of computers on an airplane with the wireless feature, you need to
disable it before boarding. To disable it, refer to the instructions in “Enabling or disabling the wireless
feature” on page 72.
Note: You can purchase a wireless networking card as an option. For more information, refer to “Finding
ThinkPad options” on page 151.
Tips for using the wireless LAN feature
• Place your computer so that there are as few obstacles as possible between the wireless LAN access
point and the computer.
• For the best connection of the wireless LAN feature, open your computer display to an angle of slightly
more than 90 degrees.
• If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth
option, data transmission speed can be delayed and the performance of the wireless feature can be
degraded.
Wireless networking setup
To use the built-in wireless networking card (the 802.11 standard) to communicate, start Access Connections.
Note: Before you start setting up wireless networking connections by using Access Connections, obtain a
Network Name (SSID) and your encryption information from your network administrator.
Access Connections, a connectivity assistant program, can easily enable one network adapter and disable
the other adapters on demand. After setting up your wireless networking connection, you can use the
program to quickly switch the network settings.
Chapter 2. Using your computer
65
Wireless upgradeable ThinkPad models
Your computer can be wireless upgradeable. This means that your computer has an antenna that can
support wireless LAN access when wireless LAN access points are available. Wireless devices are available
from Lenovo. For more information, see “Finding ThinkPad options” on page 151.
Using wireless WAN connections
Wireless Wide Area Network (wireless WAN) enables you to establish wireless connections over remote
public or private networks. These connections can be maintained over a large geographical area, such as
a city or an entire country, by use of multiple antenna sites or satellite systems maintained by wireless
service providers.
Some ThinkPad notebooks come with a built-in wireless WAN card integrating some wireless WAN
technologies, such as 1xEV-DO, HSPA, 3G or GPRS. You can connect to the Internet or your company
network with the built-in wireless WAN card and the configuration utility to make a wireless WAN connection
and monitor its status.
Note: Wireless WAN service is provided by authorized service providers in some countries.
To find the location of the wireless WAN antenna on your computer, refer to “Location of the UltraConnect
wireless antennas” on page 246.
To use the wireless WAN feature, start Access Connections.
For maximum performance from your wireless WAN connection, please keep the following best usage
guidelines in mind:
• Keep your notebook away from your body.
• Place your notebook on a flat surface and open your computer display to an angel of slightly more
than 90 degrees.
• Place your notebook away from concrete or brick walls that may dampen cellular signals.
• Best reception will be available near windows and other locations where cellular phone reception is the
strongest.
Using Bluetooth
For Windows 7 and Windows Vista
If your computer is equipped with the Integrated Bluetooth features, you can enable or disable the features
by pressing Fn+F5. If you press Fn+F5, a list of wireless features is displayed. You can enable or disable the
Bluetooth features with a single click.
To configure a Bluetooth device or manage connection settings, you can use Bluetooth Devices in Control
Panel.
1. Click Start ➙ Control Panel.
2. Click Hardware and Sound.
3. Click Devices and Printers (in Windows Vista, Bluetooth Devices).
To send data to a Bluetooth-enabled device, do as follows:
1. Right-click data that you want to send.
2. Select Send To ➙ Bluetooth Devices.
For details, refer to the Windows online help.
66
User Guide
Note: If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth
option, data transmission speed can be delayed and the performance of the wireless feature can be
degraded.
For Windows XP
If your computer is equipped with the Integrated Bluetooth features, you can enable or disable the features
by pressing Fn+F5.
If you press Fn+F5, a list of wireless features is displayed. You can enable or disable the Bluetooth features
with a single click.
In Windows XP, you can use either ThinkPad Bluetooth with Enhanced Data Rate Software, or the Microsoft
Bluetooth software. By default, ThinkPad Bluetooth with Enhanced Data Rate Software is installed on your
computer.
Using Bluetooth for the first time on your computer
If this is the first time Bluetooth has been used on your computer, follow either of the following procedures:
1. Double-click the My Bluetooth Places icon on the desktop, or the Bluetooth icon in the task bar. The
Start Using Bluetooth window opens, and some virtual device drivers are installed automatically.
2. Wait until the installation of the drivers is complete.
OR
1. Right-click the My Bluetooth Places icon on the desktop, or the Bluetooth icon in the task bar.
2. Select Start Using Bluetooth. The Start Using Bluetooth window opens, and some virtual device
drivers are installed automatically.
3. Wait until the installation of the drivers is complete.
Some other virtual device drivers will be installed on demand when you use certain Bluetooth profiles
for the first time.
Using the Microsoft Bluetooth software
If you are using Windows XP and want to use the Microsoft standard Bluetooth features, install the software
by following the instructions in “Installing the Microsoft Bluetooth software in Windows XP” on page 69.
For information about how to use the Bluetooth function, do as follows:
1. Press Fn+F5 to turn on Bluetooth.
2. Click Start ➙ Control Panel.
3. Click Printers and Other Hardware.
4. Click Bluetooth Devices.
5. Click the Options tab.
6. Click Learn more about Bluetooth Settings.
Using ThinkPad Bluetooth with Enhanced Data Rate Software
If ThinkPad Bluetooth with Enhanced Data Rate Software is installed on your computer, two icons are
displayed on the screen:
• My Bluetooth Places on the desktop
• Bluetooth Configuration in the system tray of the task bar
Chapter 2. Using your computer
67
To use the Bluetooth features, do the following:
1. Double-click the My Bluetooth Places icon on the desktop.
2. For Windows XP, go to Bluetooth Tasks and double-click View devices in range. A list of the devices
on which Bluetooth has been enabled appears.
3. Click the device to which you want access. A list of the services available on that device appears,
as follows:
• Bluetooth keyboard and mouse (Human interface devices)
• Printer (HCRP)
• Audio gateway
• Headset
• PIM synchronization
• Fax
• File transfer
• PIM item transfer
• Dial-up networking
• Network access
• Bluetooth serial port
• Bluetooth Imaging
• Hands Free
• AV profile
4. Click the service you want.
For more information, press the F1 key to open the online help for Bluetooth.
Bluetooth Configuration
To use the configuration features of Bluetooth, right-click the icon. A pop-up menu appears. Select
Bluetooth Setup Wizard or Advanced Configuration.
The Bluetooth Setup Wizard has the following capabilities:
• Finding all Bluetooth-enabled devices that can provide services
• Finding a specific Bluetooth-enabled device that you want to use, and configuring the services on that
device
• Configuring the Bluetooth-enabled services on your computer that are provided for remote devices
• Configuring the name and device type of your computer
The Advanced Configuration has the following functions:
• Configuring the name and device type of your computer
• Configuring your computer settings so that remote Bluetooth-enabled devices can find your computer
• Configuring your computer settings so that your computer can find remote Bluetooth-enabled devices
• Configuring, on your computer, the Bluetooth-enabled services provided for remote devices
• Configuring the services on remote Bluetooth-enabled devices
• Displaying information about Bluetooth hardware
68
User Guide
For details, refer to the help for Bluetooth. To see the help, double-click My Bluetooth Places, and click
Help and then Bluetooth help. Another way to start the help is to right-click Bluetooth Configuration in the
system tray of the task bar, and click Advanced Configuration and then Help.
Installing the Microsoft Bluetooth software in Windows XP
If you want to use the Microsoft Bluetooth software, do as follows:
1. First uninstall the ThinkPad Bluetooth with Enhanced Data Rate Software.
a. Turn Bluetooth power off.
b. Click Start ➙ Control Panel.
c. Click Add or Remove Programs.
d. Select ThinkPad Bluetooth with Enhanced Data Rate Software; then click Change/Remove to
uninstall the software.
e. Follow the instructions on the screen.
2. Next install the Microsoft Bluetooth software as follows:
a. Turn Bluetooth power on. Microsoft Bluetooth software is loaded automatically.
b. If the Found New Hardware Wizard window pops up, do the following:
1) Select No, not this time, and then click Next.
2) Select Install from a list or specific location (Advanced); then click Next.
3) Select Search for the best driver in those locations.
4) Select Include this location in the search:, and type C:\SWTOOLS\Drivers\MSBTooth, or specify
the location in which you placed the extracted INF file. Then click Next.
c. Click Finish.
Installing ThinkPad Bluetooth with Enhanced Data Rate Software in Windows XP
If you are using the Microsoft Bluetooth software and want to use ThinkPad Bluetooth with Enhanced Data
Rate Software instead, replace the Microsoft Bluetooth software with ThinkPad Bluetooth with Enhanced
Data Rate Software as follows:
1. Press Fn+F5 to turn the Bluetooth power on.
2. Click Start ➙ Run.
3. Type C:\SWTOOLS\Drivers\TPBTooth\Setup.exe (or specify the full path to the setup.exe file you have
downloaded from http://www.lenovo.com/support); then click OK.
4. Click Next.
5. Select I accept the terms in the license agreement; then click Next.
6. Click Next to select the default destination folder.
If you need to change the destination folder, click Change, select or enter the name of the destination
folder in the Change current destination folder window, and click OK.
7. Click Install to begin installation.
8. Click OK to accept the driver signature.
9. Click Finish.
10. Restart the computer if necessary.
If you did not turn the Bluetooth power on before installing ThinkPad Bluetooth with Enhanced Data Rate
Software, that is, if you skipped step 1, replace the Bluetooth driver as follows:
1. Click Start ➙ Control Panel.
Chapter 2. Using your computer
69
2. Click Performance and Maintenance; then click System.
3. Click the Hardware tab; then click Device Manager.
4. Double-click Bluetooth Radios to extract the Bluetooth Radios device tree.
5. Double-click the ThinkPad Bluetooth with Enhanced Data Rate icon to open the Properties window.
6. Click the Driver tab; then click Update Driver.
7. Click No, not this time, and then click Next.
8. Select Install from a list or specific location (Advanced), and then click Next.
9. Select Don't search. I will choose the driver to install; then click Next.
10. Select the driver that has no “Digital Signed” icon; then click Next.
11. Click Finish.
Note: If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth
option, data transmission speed can be delayed and the performance of the wireless feature can be
degraded.
Using WiMAX
Some ThinkPad notebooks come with a built-in wireless LAN card integrating WiMAX technology.
WiMAX, a long-range wireless data transmission technology based on the 802.16 standard, provides you
with a “last mile” broadband connectivity similar to that offered by cable or ADSL, but without the need to
physically connect a cable to the PC.
To use the WiMAX feature, start Access Connections.
For Windows 7: To start the Access Connections wizard, see “Accessing applications in Windows 7” on
page 34, and follow the instructions on the screen.
For Windows Vista and Windows XP: To start the Access Connections wizard, click Start ➙ All Programs ➙
ThinkVantage ➙ Access Connections. Then follow the instructions on the screen.
Checking wireless connection status
Access Connections Gauge (Windows 7)
If your computer is running Windows 7, the Access Connections Gauge in the task bar displays the signal
strength and status of your wireless connection.
Note: To display Access Connections Gauge in the task bar, see the Help in Access Connections.
You can find more detailed information about the signal strength and status of your wireless connection
by opening Access Connections or by right-clicking the Access Connections Gauge in the task bar and
selecting View Status of Wireless Connection.
• Access Connections Gauge states: wireless LAN
–
–
Power to the wireless radio is off or no signal.
Power to the wireless radio is on. The signal strength of the wireless connection is poor. To
improve signal strength, move your system closer to the wireless access point.
Power to the wireless radio is on. The signal strength of the wireless connection
–
is marginal.
70
User Guide
–
Power to the wireless radio is on. The signal strength of the wireless connection is
excellent.
• Access Connections Gauge states: wireless WAN
–
No signal
–
Signal level 1
–
Signal level 2
–
Signal level 3
Note: For more information about Access Connections Gauge, see the Help in Access Connections.
Access Connections icon and wireless status icon
The Access Connections icon displays general connection status.
The wireless status icon displays the signal strength and status of your wireless connection.
You can find more detailed information about the signal strength and status of your wireless connection
either by opening Access Connections or by double-clicking the Access Connections wireless status
icon in the task bar.
Note: If your computer is a Windows 7 model, to display the Access Connections status icon and the
wireless status icon in the system tray, refer to the Access Connections on-line help.
• Access Connections icon states
–
No location profile is active or none exists.
–
Current location profile is disconnected.
–
Current location profile is connected.
• Wireless status icon states: wireless LAN
–
Power to the wireless radio is off.
–
Power to the wireless radio is on. No association.
–
Power to the wireless radio is on. No signal.
–
Power to the wireless radio is on. The signal strength of the wireless connection is excellent.
–
Power to the wireless radio is on. The signal strength of the wireless connection is marginal.
–
Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve
signal strength, move your system closer to the wireless access point.
• Wireless status icon states: wireless WAN
–
Power to the WAN radio is off
–
No association
–
No signal
–
Signal level 1
–
Signal level 2
–
Signal level 3
Note: If you have trouble in making a connection, try moving your computer closer to your wireless access
point.
Chapter 2. Using your computer
71
Enabling or disabling the wireless feature
To enable or disable the wireless feature, press Fn+F5. A list of wireless features is displayed. You can turn
the feature on and off with a single click.
You can also enable or disable the feature by the following procedures.
To enable the wireless feature, do as follows:
1. Click the Access Connections wireless status icon in the system tray.
2. Click Power On Wireless Radio.
To disable the wireless feature, do as follows:
1. Click the Access Connections wireless status icon in the system tray.
2. Click Power Off Wireless Radio.
Notes:
• You can use the wireless radio switch to disable the wireless radio of all the wireless devices on your
computer.
• If your computer is a Windows 7 model, to display the Access Connections status icon and the wireless
status icon in the system tray, refer to the Access Connections on-line help.
Using a projector or external display
Your computer comes with many features to increase the enjoyment of your computer and help you give
presentations with confidence.
Changing display settings
You can change the display settings, such as font size or color mode or numeric lock.
Font size
To make a font size larger, do as follows:
For Windows 7:
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Select the Medium or Larger radio button.
4. Click Apply. The change will take effect after you log off.
For Windows Vista:
1. Right-click on the desktop, and click Personalize.
2. Click Adjust font size (DPI) under Tasks at the left. If you are prompted for an administrator password
or confirmation, type the password or provide confirmation.
3. Select the Larger scale (120DPI)- make text more readable check box.
4. Click OK. The change will take effect after the computer restarts. You are prompted to restart the
computer after you click OK or Apply.
For Windows XP:
1. Right-click on the desktop, and click Properties. The Display Properties window opens.
2. Click the Appearance tab.
72
User Guide
3. Under Font Size, click Large Fonts or Extra Large Fonts.
4. Click Apply to apply the settings.
5. Click OK. If you are prompted to restart the computer after you click OK or Apply, the change will
take effect after the computer restarts.
Numeric lock
To change the numeric lock setting, do as follows:
For Windows 7:
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Click Change display settings.
4. Click Advanced settings, select the On Screen Display tab, and then click Num Lock Settings.
5. The setting window opens.
6. Follow the instructions on the screen.
For Windows Vista:
1. Right-click on the desktop, and click Personalize.
2. Click Display Settings.
3. Click Advanced Settings, select the On Screen Display tab, and then click Num Lock Settings.
4. The setting window opens.
5. Follow the instructions on the screen.
For Windows XP:
1. Right-click on the desktop, and click Properties. The Display Properties window opens.
2. Click the Settings tab.
3. Click Advanced, select the On Screen Display tab, and then click Num Lock Settings.
4. The setting window opens.
5. Follow the instructions on the screen.
Connecting a projector or external display
Attaching an external monitor
Your computer can support a maximum video resolution of up to 2048x1536 (with an external monitor
attached to the CRT connector) or up to 2560x1600 (with an external monitor attached to the DisplayPort
connector), provided that the external monitor also supports that resolution. For more details, refer to
the manuals provided with your monitor.
You can set any resolution for either the computer display or the external monitor. When you use both at
the same time, the resolution of both is the same. If you set a higher resolution for the computer display,
you can see only part of the screen at a time. You can see other parts by moving the image with the
TrackPoint or another pointing device.
You can move the display output to the computer display, the external monitor, or both in the Display
Settings window (in Windows XP, Display Properties window).
Chapter 2. Using your computer
73
Connecting an external monitor
To attach an external monitor, do as follows:
For Windows 7:
1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet
2. Turn on the external monitor.
3. Change the display output location by pressing Fn+F7. This allows you to switch between viewing
output on the external display, the computer display, and both displays.
Note: If your computer cannot detect the external monitor, right-click on the desktop, then select Screen
resolution. Click the Detect button.
For Windows Vista:
1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. If this is the first time the external monitor has been connected, the New Display Detected dialog box
opens. Select one of the following, and then click OK.
• Duplicate my desktop on all displays (mirrored)
• Show different parts of my desktop on each display (extended)
• Show my desktop on the external monitor only
Note: If your computer cannot detect the external monitor, the New Display Detected dialog box does
not open. For details, refer to the Windows online help.
For Windows XP:
1. Turn off the computer.
2. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
3. Turn on the external monitor and the computer.
4. Change the display output location by pressing Fn+F7. This allows you to switch between viewing
output on the external display, the computer display, and both displays.
Notes:
• Do not change the display output location while a moving picture is being drawn, for example, while
playing a movie or a game, or viewing a business presentation. Close the application before changing the
display output location, or change the display mode before you open an MPEG file to play.
• If you are attaching an external monitor that supports only VGA mode (640x480 resolution), do not view
output on both the computer display and the external monitor. Doing so would cause the external monitor
screen to be scrambled and the output not to be displayed; in addition, it could cause damage to the
screen. Use the external monitor only.
• If the external TFT monitor you connect has an analog interface, flickers or ripples may appear on some
displays, such as the shutdown screen of Windows. This is caused by the external TFT monitor, and
cannot be fixed by adjusting the external TFT monitor or the computer side settings.
Setting the monitor types
To set your monitor type, do as follows:
For Windows 7:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor.
74
User Guide
3. Right-click on the desktop, and click Screen resolution.
Note: If your computer cannot detect the external monitor, click the Detect button.
4. Set Resolution.
5. Click Advanced Settings.
6. Click the Monitor tab. Check the monitor information window to make sure that the monitor type is
correct. If it is, click OK to close the window; otherwise do as follows.
7. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnP
Monitor.
8. Click Properties. If you are prompted for an administrator password or confirmation, type the password
or provide confirmation.
9. Click the Driver tab.
10. Click Update Driver.
11. Click Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
12. Clear the Show compatible hardware check box.
13. Select Manufacturer and Model for your monitor. If you cannot find your monitor in the list, stop the
installation of this driver and use the driver shipped with your monitor.
14. After updating the driver, click Close.
15. Click OK.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced
Settings, select the Monitor tab, then set Colors.
For Windows Vista:
Note: If you select Show different parts of my desktop on each display (extended), refer to “Using the
Extend desktop function” on page 78.
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor.
3. Press Fn+F7 to change the display output location to the external monitor.
4. Right-click on the desktop, and click Personalize.
5. Click Display Settings. The Display Settings window opens.
6. Click Advanced Settings.
7. Click the Monitor tab. Check the monitor information window to make sure that the monitor type is
correct. If it is, click OK to close the window; otherwise do as follows.
8. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnP
Monitor.
9. Click Properties. If you are prompted for an administrator password or confirmation, type the password
or provide confirmation.
10. Click the Driver tab.
11. Click Update Driver.
12. Click Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
13. Clear the Show compatible hardware check box.
14. Select Manufacturer and Model for your monitor. If you cannot find your monitor in the list, stop the
installation of this driver and use the driver shipped with your monitor.
15. After updating the driver, click Close.
Chapter 2. Using your computer
75
16. Set Resolution and Colors in the Display Settings window.
17. Click OK.
For Windows XP:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor and the computer.
3. Press Fn+F7 to change the display output location to the external monitor.
4. Right-click on the desktop, and click Properties to open the Display Properties window.
5. Click the Settings tab.
6. Click Advanced.
7. Click the Monitor tab. Check the monitor information window to make sure that the monitor type is
correct. If it is, click OK to close the window; otherwise do as follows.
8. If more than two monitor types are displayed, select Default Monitor.
9. Click Properties.
10. Click the Driver tab.
11. Click Update Driver. The Hardware Update Wizard appears.
12. Click No, not this time, and then click Next.
13. Select Install from a list or specific location (Advanced), and then click Next.
14. Select Don't search. I will choose the driver to install, and then click Next.
15. Clear the Show compatible hardware check box.
16. Select Manufacturer and Model for your monitor. If you cannot find your monitor in the list, stop the
installation of this driver and use the driver shipped with your monitor.
17. After updating the driver, click OK to close the Properties window.
18. Set Colors and Screen area in the Display Properties window.
19. Click OK.
Considerations for attaching an external monitor
• When installing an operating system, you must install the display driver for your monitor that is supplied
with the computer, and the Monitor INF file that is supplied with the external monitor.
• If you set a resolution higher than the resolution you are using on the panel, and use a panel that does not
support that resolution, take advantage of the virtual screen function, which enables you to display only a
part of the high-resolution screen image your computer produces. You can see other parts of the image
by moving the screen with the TrackPoint or other pointing device.
• If the external monitor you are using is outdated, the resolution and the refresh rate may be limited.
Using the DVI monitor
If your computer has one of the optional expansion units, a ThinkPad Mini Dock Plus Series 3 or a ThinkPad
Mini Dock Series 3, you can use the Digital Visual Interface (DVI) monitor through the DVI connector
of that unit.
Notes:
• The screen mode that can be used depends on the specifications of the DVI monitor.
• Before you attach the DVI monitor, make sure that the computer is attached to the expansion unit and
the system works properly.
To attach the DVI monitor, do as follows:
1. Turn off the computer.
76
User Guide
2. Connect the DVI monitor to the DVI connector of the expansion unit, and then connect the monitor
to an electrical outlet.
3. Turn on the DVI monitor and the computer. The system starts.
If the computer output does not appear on the DVI monitor, do as follows:
For a computer that has the Intel display adapter:
1. Press Ctrl+Alt+F12. The Intel Graphics Media Accelerator Driver for mobile window appears.
2. Select Digital Display, Intel Dual Display Clone, or Extended Desktop. If you select Digital Display,
the computer output appears on the DVI monitor only. If you select Intel Dual Display Clone or
Extended Desktop, the output appears both on the computer display and on the DVI monitor.
3. Click OK.
Considerations for attaching a DVI monitor
Connect the DVI monitor to the expansion unit, and turn it on before you turn on the computer. Otherwise
the system cannot recognize that the monitor is connected. If the option for enabling the DVI monitor in the
Display Properties window does not appear, try closing the window and opening it again. If the option still
does not appear, make sure that the connector of the monitor is attached firmly, and repeat the procedure
for attaching the monitor.
Using the DisplayPort connector
Your computer has a DisplayPort connector, the latest digital display interface for connection to various
external devices, such as CRT monitors, projectors, or even HDTV. This compact connector enables a
plug-and-play setup and supports adaptors that can plug into DVI, VGA, or HDMI ports.
The DisplayPort connector of your computer supports audio as well as video streaming.
Setting up a presentation
Note: If your computer is a Windows 7 model, it does not support Presentation Director, but the Fn+F7 or
Win+P key combination is available for switching display output to a connected projector.
Presentation Director provides an easy way to set up your computer to help you give presentations with
confidence, even when you are away from your office.
Use Presentation Director to adjust resolution settings and temporarily disable power management timers to
ensure an uninterrupted presentation.
Presentation Director has some predefined presentation schemes. To apply a presentation scheme, you can
use the Fn+F7 key combination.
To start Presentation Director, click Start ➙ All Programs ➙ ThinkVantage ➙ Presentation Director, and
follow the instructions on the screen.
Projecting video
To display information and make presentations, you can attach a data projector to your computer. Attach the
data projector to the monitor connector on your computer.
Note: It may take several seconds before the projector displays the image. If you do not see your desktop
displayed after 60 seconds, try pressing Fn+F7 to switch between different display output locations.
You can create a presentation scheme by following the instructions of the Presentation Director, with the
projector attached to your computer. You can save the scheme for a future presentation with the same
equipment.
Chapter 2. Using your computer
77
Playing sound
Your projector might have one or more audio-input connectors. To project sound, you will need to attach the
combo audio jack on your computer to these connectors, using an audio cable (commercially available).
Using dual displays
Using the Extend desktop function
Your computer supports a function named the Extend desktop. With the Extend desktop function, you
can display output on both the computer display and an external monitor. You can also display different
desktop images on each monitor.
You can use the Extend desktop function without changing any settings. If the function does not work, refer
to “Enabling the Extend desktop function” on page 78 to enable it.
Considerations for using the Extend desktop function
• If you want to show DOS full-screen while in the Extend desktop mode, only the primary display shows
DOS; the other display is blacked out.
If your computer has the Intel display adapter, you can designate the other display as the primary display
by doing the following:
1. Press Ctrl+Alt+F12. The Intel CUI window opens.
2. Select Extended Desktop.
3. Change the setting to designate the primary display.
• When an application using the DirectDraw or the Direct3D is played in full-screen mode, it is shown
only on the primary display.
• You cannot use the display switching function when you are in the Extend desktop mode.
Enabling the Extend desktop function
To enable the Extend desktop function, do as follows:
For Windows 7:
1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Press Fn+F7, then select Extend.
To change the resolution for each monitor, do as follows:
1. Right-click on the desktop, and click Screen resolution.
2. Click the Monitor-1 icon (for the primary display, the computer display).
3. Select the Resolution of the primary display.
4. Click the Monitor-2 icon (for the secondary display, the external display).
5. Select the Resolution of the secondary display.
6. Place the icons for the monitors so that they touch.
Note: You can set the monitors in any relative position, but the icons must touch each other.
7. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced
Settings, select the Monitor tab, then set Colors.
78
User Guide
For Windows Vista:
1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. If this is the first time the external monitor has been connected, the New Display Detected dialog box
opens. Select Show different parts of my desktop on each display (extended), and then click OK.
To change the resolution for each monitor, do as follows:
1. Right-click on the desktop, and click Personalize.
2. Click Display Settings. The Display Settings window opens.
3. Click the Monitor-1 icon (for the primary display, the computer display).
4. Select the Resolution and the Colors of the primary display.
5. Click the Monitor-2 icon (for the secondary display, the external display).
6. Select the Resolution and the Colors of the secondary display.
7. Place the icons for the monitors so that they touch.
Note: You can set the monitors in any relative position, but the icons must touch each other.
8. Click OK to apply the changes.
For Windows XP:
1. Turn off the computer.
2. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet.
3. Turn on the external monitor and the computer.
4. Right-click on the desktop, and click Properties to open the Display Properties window.
5. Click the Settings tab, and click the Monitor-2 icon.
6. Select the Extend my Windows desktop onto this monitor check box and click Apply. (If the Monitor
Settings window opens, click Yes.)
To change the resolution for each monitor, do as follows:
1. Click the Monitor-1 icon (for the primary display, the computer display).
2. Select the color quality and the screen resolution of the primary display.
3. Click the Monitor-2 icon (for the secondary display, the external display).
4. Select the color quality and the screen resolution of the secondary display.
5. Place the icons for the monitors so that they touch.
Note: You can set the monitors in any relative position, but the icons must touch each other.
6. Click OK to apply the changes.
Using audio features
Your computer is equipped with the following:
• Combo audio jack, 1/8 inch (3.5 mm) in diameter
• Built-in stereo speakers
• Built-in dual array digital microphone
Your computer also has an audio chip that enables you to enjoy various multimedia audio features:
• Compliant with Intel High Definition Audio.
Chapter 2. Using your computer
79
• Recording and playback of PCM and WAV files in 16-bit or 24-bit format.
• Playback of a WAV file at a sample rate of 44.1KHz to 192 KHz.
• Playback of MIDI files through a Wave table synthesizer under Microsoft Windows operating systems.
• Playback of MP3 files through the Windows Media Player or a software MP3 player.
• Recording from various sound sources, such as a headset attached either to the combo audio jack of
your computer or to the microphone jack of the ThinkPad Mini Dock Series 3 or the ThinkPad Mini
Dock Plus Series 3.
Note: The combo audio jack does not support a conventional microphone.
The following table shows which functions of the audio devices attached to the jacks on your computer or
docking station are supported.
Table 3. Audio feature list
Jacks
Headset with a 3.5 mm
4-pole plug
Conventional headphone
Conventional microphone
Combo audio jack
Headphone and
microphone functions
supported
Headphone function
supported
Not supported
Headphone jack of the
docking station
Only headphone function
supported
Headphone function
supported
Not supported
Not supported
Microphone function
supported
Microphone function not
supported
Microphone jack of the
docking station
Not supported
Beam Forming feature
A built-in dual array digital microphone is mounted at the top of the display. Whereas a conventional
single-element microphone captures sounds from all around, the built-in dual array digital microphone is
designed to capture the sound from an exceptionally limited angle, through the combination of a specialized
microphone array with a capability of digital signal processing. Therefore the microphone captures sounds
from the area in front of the system clearly, but blocks out almost all the sounds from outside the capturing
range. Thus the speech of a user sitting in front of the system is input to the system without interference
from noise in the surrounding area. To record your speech most clearly, you should speak directly in front
of the computer.
Configuring for sound recording
To configure the microphone for optimized sound recording, open the SmartAudio window as follows:
For Windows 7 and Windows Vista: Click Start ➙ Control Panel ➙ Hardware and Sound ➙ SmartAudio.
The SmartAudio window opens.
For Windows XP: Click Start ➙ Control Panel. Switch to Classic View and click SmartAudio. The
SmartAudio window opens.
Using an integrated camera
If your computer has an integrated camera, when you press Fn+F6 to open the Communications settings
window, the camera will be launched and the green camera-in-use indicator will turn on automatically. In
the Communications settings window, you can preview your video image and take a snapshot of your
current image.
80
User Guide
You can also use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the integrated camera with other programs, open one of the
programs and start the photographing, video capturing, or videoconferencing function. Then, the camera will
start automatically and the green camera-in-use indicator will turn on. For more information about using the
camera with a program, refer to the documentation that came with the program.
If you do not want the camera to be launched automatically when you press Fn+F6 or when you use a
program, press Fn+F6 to open the Communications settings window and click the Hide my camera image
button to disable the camera.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
1. Press Fn+F6. The Communications settings window opens.
2. Click the Manage Settings button. The Communications Utility window opens.
3. In the Communications Utility window, configure the camera settings depending on your individual
needs.
Using the ThinkLight feature
You can use your computer under less than perfect lighting conditions by enabling the ThinkLight feature. To
illuminate the keyboard by turning on your ThinkLight, press Fn+PgUp.
Note: Avoid using your computer in dark conditions for prolonged periods. It is bad for your eyes.
Note: ThinkLight is not available in ThinkPad X220 Tablet and X220i Tablet models.
Using the media card reader
Depending on the model, your computer may have an ExpressCard slot for a 54 mm-wide card, a media
card reader slot, or a smart card reader slot.
If your computer has a media card reader slot, it supports the following cards:
• SD card
• SDHC card
• SDXC card
• MultiMediaCard (MMC)
Notes:
• Your computer does not support the CPRM feature for the SD card.
• When transferring data to or from a flash media card, such as an SD card, do not put your computer
in sleep (standby) or hibernation mode before the data transfer is complete. To do so might cause
damage to your data.
Chapter 2. Using your computer
81
For more information on ExpressCards, smart cards, and flash media cards, refer to any of the following
topics:
•
“Inserting an ExpressCard, a flash media card, or a smart card” on page 82.
•
“Removing an ExpressCard, a flash media card, or a smart card” on page 83.
Inserting an ExpressCard, a flash media card, or a smart card
Attention: Do not insert an ExpressCard while the computer is in sleep (standby) mode or hibernation mode.
If you do, the computer may not respond when you try to resume using it.
Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal
object. This action reduces any static electricity from your body. The static electricity could damage the card.
• 54 mm-wide ExpressCard
• Flash media card, such as an SD card, an SDHC card, an SDXC card, and a MultiMediaCard
• Smart card
For information about the location of the ExpressCard slot, flash media card reader slot, and smart card slot,
see “Locating computer controls, connectors, and indicators” on page 1.
To insert a 54 mm-wide ExpressCard into the ExpressCard slot, do the following:
1. Make sure that the card is correctly oriented.
2. Push the slot cover, and insert the card into the slot with the notched edge facing upward. Then press
the card firmly into the connector.
To insert a flash media card into the 4-in-1 media card reader slot, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the card firmly into the 4-in-1 media card reader slot. The card may stop before it is completely
installed into the slot.
To insert a smart card into the smart card slot, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the card so that the metallic contact is up and goes in first. Insert the card firmly into the slot.
If the ExpressCard, flash media card, or smart card is not Plug and Play, do the following:
• For Windows 7:
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
• For Windows Vista and Windows XP:
– Open Control Panel and switch to Classic view.
– Double-click the Add Hardware icon. The Add Hardware Wizard starts.
– Follow the instructions on the screen.
82
User Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 100
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:03064ee6-9a2b-4609-b281-1713c48e27c8
Modify Date                     : 2011:02:18 15:01:03+08:00
Create Date                     : 2011:02:18 15:00:36+08:00
Metadata Date                   : 2011:02:18 15:01:03+08:00
Document ID                     : uuid:fb5f4be7-4a07-42dd-8ada-5353bbf14b4f
Format                          : application/pdf
Creator                         : Arbortext 5.4
Producer                        : PDFlib+PDI 7.0.4 (Win32)

EXIF Metadata provided by EXIF.tools