Wistron TP00079A Notebook Computer User Manual

Wistron Corporation Notebook Computer

User Manual

Download: Wistron TP00079A Notebook Computer User Manual
Mirror Download [FCC.gov]Wistron TP00079A Notebook Computer User Manual
Document ID2888339
Application IDfHdouC4nI4XX6L54EJdY7w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize329.61kB (4120186 bits)
Date Submitted2016-01-28 00:00:00
Date Available2016-07-27 00:00:00
Creation Date2017-11-16 12:44:07
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-16 12:44:07
Document TitleUser Manual
Document CreatorArbortext Publishing Engine

ThinkPad P40 Yoga, ThinkPad S3, ThinkPad
Yoga 14, and ThinkPad Yoga 460 User Guide
Note: Before using this information and the product it supports, be sure to read and understand the following:
• Safety, Warranty, and Setup Guide
• Regulatory Notice
•
“Important safety information” on page vi
• Appendix E “Notices” on page 151
The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To
refer to them, go to http://www.lenovo.com/UserManuals and follow the instructions on the screen.
Second Edition (January 2016)
© Copyright Lenovo 2015.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration
“GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Contents
Read this first . . . . . . . . . . . . . . v
Important safety information . . . . . . . .
Conditions that require immediate action .
Service and upgrades . . . . . . . . .
Power cords and power adapters . . . .
Extension cords and related devices . . .
Plugs and outlets . . . . . . . . . . .
Power supply statement . . . . . . . .
External devices . . . . . . . . . . .
General battery notice . . . . . . . . .
Notice for built-in rechargeable battery . .
Notice for non-rechargeable coin-cell battery
Heat and product ventilation . . . . . .
Electrical current safety information . . .
Liquid crystal display (LCD) notice . . . .
Using headphones or earphones. . . . .
Additional safety information . . . . . .
. vi
vii
vii
viii
. ix
. ix
. ix
. x
. x
. x
. xi
. xi
xii
xiii
xiii
xiii
Chapter 1. Product overview . . . . . . 1
Locating computer controls, connectors, and
indicators. . . . . . . . . . . . . . . .
Front view. . . . . . . . . . . . . .
Right-side view. . . . . . . . . . . .
Left-side view . . . . . . . . . . . .
Bottom view . . . . . . . . . . . . .
Rear view . . . . . . . . . . . . . .
Status indicators . . . . . . . . . . .
Locating important product information . . . .
Machine type and model label . . . . . .
FCC ID and IC Certification information . .
Labels for the Windows operating systems .
Features . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . .
Operating environment . . . . . . . . . .
Lenovo programs . . . . . . . . . . . .
Accessing Lenovo programs . . . . . .
An introduction to Lenovo programs . . .
Chapter 2. Using your computer . . .
Registering your computer . . . . . . .
Frequently asked questions . . . . . .
Getting help about the Windows operating
system . . . . . . . . . . . . . . .
Operating modes. . . . . . . . . . .
Rotating the computer display. . . .
Notebook mode . . . . . . . . .
Stand mode . . . . . . . . . . .
© Copyright Lenovo 2015
10
11
11
12
12
12
15
. . .
. . .
15
15
16
17
17
18
18
Tablet mode . . . . . . . . . . . . .
Tent mode . . . . . . . . . . . . .
Using the special buttons . . . . . . . . .
Using the special keys . . . . . . . . . .
ThinkPad Pen Pro . . . . . . . . . . . .
Using the keyboard . . . . . . . . . . . .
Using the multi-touch screen . . . . . . . .
Using the ThinkPad pointing device . . . . .
TrackPoint pointing device . . . . . . .
Trackpad . . . . . . . . . . . . . .
Trackpad touch gestures . . . . . . . .
Customizing the ThinkPad pointing device .
Replacing the cap of the TrackPoint pointing
stick . . . . . . . . . . . . . . . .
Power management . . . . . . . . . . .
Checking the battery status . . . . . . .
Using the ac power . . . . . . . . . .
Charging the battery . . . . . . . . .
Maximizing the battery life . . . . . . .
Managing the battery power . . . . . .
Power-saving modes . . . . . . . . .
Connecting to the network . . . . . . . . .
Ethernet connections . . . . . . . . .
Wireless connections . . . . . . . . .
Using an external display . . . . . . . . .
Connecting an external display . . . . .
Choosing a display mode . . . . . . .
Changing display settings . . . . . . .
Using the NVIDIA Optimus Graphics feature . .
Using audio features . . . . . . . . . . .
Using the camera . . . . . . . . . . . .
Using a flash media card. . . . . . . . . .
20
20
22
22
24
26
28
31
31
32
33
34
34
35
35
35
36
36
36
37
37
37
38
39
39
40
40
40
41
41
42
Chapter 3. Enhancing your
computer . . . . . . . . . . . . . . .
45
Finding ThinkPad options . . . . . . . . . .
ThinkPad OneLink+ Dock . . . . . . . . . .
45
45
Chapter 4. You and your computer . .
47
Accessibility and comfort .
Ergonomic information.
Comfort . . . . . .
Accessibility information
Traveling with your computer
Travel tips . . . . . .
Travel accessories . .
47
47
48
48
51
51
51
Chapter 5. Security . . . . . . . . . .
Using passwords. . . . . . . . . . . . .
Typing passwords . . . . . . . . . .
Power-on password . . . . . . . . . .
Supervisor password . . . . . . . . .
Hard disk passwords . . . . . . . . .
Hard disk security . . . . . . . . . . . .
Setting the security chip . . . . . . . . . .
Using the fingerprint reader. . . . . . . . .
Notice on deleting data from your storage drive.
Using firewalls . . . . . . . . . . . . . .
Protecting data against viruses . . . . . . .
53
53
53
53
54
55
57
58
59
62
62
62
Chapter 6. Advanced configuration . .
65
Installing a new operating system . . . . . .
Installing the Windows 10 operating system
Installing device drivers . . . . . . . . . .
Using the ThinkPad Setup program . . . . .
Main menu . . . . . . . . . . . . .
Config menu. . . . . . . . . . . . .
Date and Time menu . . . . . . . . .
Security menu . . . . . . . . . . . .
Startup menu . . . . . . . . . . . .
Restart menu . . . . . . . . . . . .
Updating the UEFI BIOS . . . . . . . .
Using system management. . . . . . . . .
65
65
66
66
67
67
72
72
79
80
81
81
Chapter 7. Preventing problems . . .
83
General tips for preventing problems . .
Making sure device drivers are current .
Taking care of your computer . . . . .
Cleaning the cover of your computer
Chapter 8. Troubleshooting computer
problems . . . . . . . . . . . . . . .
83
84
85
86
89
Diagnosing problems . . . . . . . . . . . .
89
Troubleshooting . . . . . . . . . . . . . .
89
Computer stops responding . . . . . . .
89
Spills on the keyboard . . . . . . . . . .
90
Error messages . . . . . . . . . . . .
90
Beep errors . . . . . . . . . . . . . .
92
Memory module problems . . . . . . . .
92
Networking problems . . . . . . . . . .
92
Problems with the keyboard and other pointing
devices . . . . . . . . . . . . . . . .
94
Problems with the display and multimedia
devices . . . . . . . . . . . . . . . .
95
Battery and power problems . . . . . . .
99
Problems with drives and other storage
devices . . . . . . . . . . . . . . . . 101
A software problem . . . . . . . . . . . 102
ii
Problems with ports and connectors . . . .
Chapter 9. Recovery overview . . .
105
Recovery overview for the Windows 10 operating
system . . . . . . . . . . . . . . . . . .
Resetting your computer . . . . . . . . .
Using advanced startup options . . . . . .
Recovering your operating system if Windows
10 fails to start . . . . . . . . . . . . .
Creating and using a recovery USB drive . .
Chapter 10. Replacing devices . . .
Static electricity prevention . . . . . .
Disabling the built-in battery . . . . .
Installing or replacing the micro SIM card
Replacing the keyboard . . . . . . .
Replacing the base cover assembly . .
Replacing the memory module . . . .
Replacing the internal storage drive . .
Replacing the button I/O card . . . . .
Replacing the ac power card . . . . .
Replacing the speaker assembly . . .
Replacing the coin-cell battery . . . .
105
106
107
107
108
110
114
117
118
121
122
126
128
131
Appendix A. Regulatory
information . . . . . . . . . . . . .
Location of the UltraConnect wireless antennas . .
Wireless related information . . . . . . . . .
Wireless-radio compliance information . . .
Locating wireless regulatory notices . . . .
Certification related information . . . . . . . .
Export classification notice . . . . . . . . . .
Electronic emission notices. . . . . . . . . .
Federal Communications Commission
Declaration of Conformity . . . . . . . .
Industry Canada Class B emission compliance
statement . . . . . . . . . . . . . . .
European Union - Compliance to the
Electromagnetic Compatibility Directive . . .
German Class B compliance statement . . .
Korea Class B compliance statement . . . .
Japan VCCI Class B compliance statement . .
Japan compliance statement for products
which connect to the power mains with
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
105
105
105
107
Chapter 11. Getting support . . . .
Before you contact Lenovo . .
Getting help and service . . .
Using diagnostic programs
Lenovo Support Web site.
Calling Lenovo . . . . .
Purchasing additional services
102
131
131
132
132
132
133
135
135
135
137
137
137
138
138
138
138
139
139
140
140
rated current less than or equal to 20 A
phase . . . . . . . . . . . . .
Japan notice for ac power cord . . .
Lenovo product service information for
Taiwan . . . . . . . . . . . . .
Eurasian compliance mark . . . . .
Brazil audio notice . . . . . . . .
per
. . .
. . .
140
140
. . .
. . .
. . .
140
140
140
Appendix B. WEEE and recycling
statements . . . . . . . . . . . . .
Important WEEE information . . . . . . . . .
Japan recycling statements . . . . . . . . .
Recycling information for Brazil . . . . . . . .
Battery recycling information for the European
Union . . . . . . . . . . . . . . . . . .
Battery recycling information for Taiwan . . . . .
Battery recycling information for the United States
and Canada . . . . . . . . . . . . . . . .
© Copyright Lenovo 2015
141
141
141
142
142
143
Recycling information for China . . . . . . . .
143
Appendix C. Restriction of Hazardous
Substances Directive (RoHS) . . . . 145
European Union RoHS
China RoHS. . . . .
Turkish RoHS . . . .
Ukraine RoHS . . . .
India RoHS . . . . .
145
146
146
147
147
Appendix D. ENERGY STAR model
information . . . . . . . . . . . . .
149
Appendix E. Notices . . . . . . . . .
151
Trademarks . . . . . . . . . . . . . . . .
152
143
iii
iv
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Read this first
Be sure to follow the important tips given here to get the most use and enjoyment out of your computer.
Failure to do so might lead to discomfort or injury, or cause your computer to fail.
Protect yourself from the heat that your computer generates.
When your computer is turned on or the battery is charging, the base, the palm
rest, and some other parts may become hot. The temperature they reach
depends on the amount of system activity and the level of charge in the battery.
Extended contact with your body, even through clothing, could cause
discomfort or even a skin burn.
• Avoid keeping your hands, your lap, or any other part of your body in
contact with a hot section of the computer for any extended time.
• Periodically take hands from using the keyboard by lifting your hands from
the palm rest.
Protect yourself from the heat generated by the ac power adapter.
When the ac power adapter is connected to an electrical outlet and your
computer, it generates heat.
Extended contact with your body, even through clothing, may cause a skin
burn.
• Do not place the ac power adapter in contact with any part of your body
while it is in use.
• Never use it to warm your body.
Prevent your computer from getting wet.
To avoid spills and the danger of electrical shock, keep liquids away from your
computer.
Protect the cables from being damaged.
Applying strong force to cables may damage or break them.
Route communication lines, or the cables of an ac power adapter, a mouse, a
keyboard, a printer, or any other electronic device, so that they cannot be walked
on, tripped over, pinched by your computer or other objects, or in any way
subjected to treatment that could interfere with the operation of your computer.
© Copyright Lenovo 2015
Protect your computer and data when moving it.
Before moving a computer equipped with an internal storage drive, do one
of the following:
• Turn it off.
• Put it in sleep mode.
• Put it in hibernation mode.
This will help to prevent damage to the computer, and possible loss of data.
Handle your computer gently.
Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on
your computer, display, or external devices.
Carry your computer carefully.
• Use a quality carrying case that provides adequate cushioning and protection.
• Do not pack your computer in a tightly packed suitcase or bag.
• Before putting your computer in a carrying case, ensure that it is off, in sleep
mode, or in hibernation mode. Do not put a computer in a carrying case while it
is turned on.
• Do not carry your computer in the notebook mode, stand mode, tablet mode, or
tent mode. Carry your computer with the display closed only.
Important safety information
Note: Read the important safety information first.
This information can help you safely use your notebook computer. Follow and retain all information included
with your computer. The information in this document does not alter the terms of your purchase agreement
or the Lenovo® Limited Warranty. For more information, see “Warranty Information” in the Safety, Warranty,
and Setup Guide that comes with your computer.
Customer safety is important. Our products are developed to be safe and effective. However, personal
computers are electronic devices. Power cords, power adapters, and other features can create potential
safety risks that can result in physical injury or property damage, especially if misused. To reduce these
risks, follow the instructions included with your product, observe all warnings on the product and in the
operating instructions, and review the information included in this document carefully. By carefully following
the information contained in this document and provided with your product, you can help protect yourself
from hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In addition to notebook
computers, some products (such as speakers and monitors) ship with external power adapters. If you have
such a product, this information applies to your product. In addition, computer products contain a coin-sized
internal battery that provides power to the system clock even when the computer is unplugged, so the
battery safety information applies to all computer products.
vi
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Conditions that require immediate action
Products can become damaged due to misuse or neglect. Some product damage is serious enough
that the product should not be used again until it has been inspected and, if necessary, repaired by
an authorized servicer.
As with any electronic device, pay close attention to the product when it is turned on. On very rare
occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you
might hear sounds like popping, cracking or hissing. These conditions might merely mean that an
internal electronic component has failed in a safe and controlled manner. Or, they might indicate
a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.
Contact the Customer Support Center for further guidance. For a list of Service and Support phone
numbers, see the following Web site:
http://www.lenovo.com/support/phone
Frequently inspect your computer and its components for damage or wear or signs of danger.
If you have any question about the condition of a component, do not use the product. Contact
the Customer Support Center or the product manufacturer for instructions on how to inspect the
product and have it repaired, if necessary.
In the unlikely event that you notice any of the following conditions, or if you have any safety
concerns with your product, stop using the product and unplug it from the power source and
telecommunication lines until you can speak to the Customer Support Center for further guidance.
• Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are
cracked, broken, or damaged.
• Signs of overheating, smoke, sparks, or fire.
• Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign
substances on the battery.
• A cracking, hissing or popping sound, or strong odor that comes from the product.
• Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord or
power adapter.
• The computer product, power cord, or power adapter has been exposed to water.
• The product has been dropped or damaged in any way.
• The product does not operate normally when you follow the operating instructions.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for
or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions,
or until you get a suitable replacement.
Service and upgrades
Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or
your documentation. Only use a Service Provider who is approved to repair your particular product.
Note: Some computer parts can be upgraded or replaced by the customer. Upgrades typically are
referred to as options. Replacement parts approved for customer installation are referred to as Customer
Replaceable Units, or CRUs. Lenovo provides documentation with instructions when it is appropriate for
customers to install options or replace CRUs. You must closely follow all instructions when installing or
replacing parts. The Off state of a power indicator does not necessarily mean that voltage levels inside a
product are zero. Before you remove the covers from a product equipped with a power cord, always ensure
that the power is turned off and that the product is unplugged from any power source. If you have any
questions or concerns, contact the Customer Support Center.
© Copyright Lenovo 2015
vii
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer
cool before opening the cover.
Power cords and power adapters
DANGER
Use only the power cords and power adapters supplied by the product manufacturer.
The power cords shall be safety approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm2, or
better. For other countries, the suitable types shall be used accordingly.
Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in
ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect power cords and power adapters from liquids. For instance, do not leave your power cord
or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers.
Liquids can cause a short circuit, particularly if the power cord or power adapter has been stressed
by misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector
terminals on a power adapter, which can eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins or shows signs of
overheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
To prevent possible overheating, do not cover the power adapter with clothing or other objects
when the power adapter is plugged into an electrical outlet.
viii
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use
are rated to handle the electrical requirements of the product. Never overload these devices. If power strips
are used, the load should not exceed the power strip input rating. Consult an electrician for more information
if you have questions about power loads, power requirements, and input ratings.
Plugs and outlets
DANGER
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain
a replacement.
Do not share an electrical outlet with other home or commercial appliances that draw large amounts
of electricity; otherwise, unstable voltage might damage your computer, data, or attached devices.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded
electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into
a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an
approved outlet adapter or to replace the outlet with one that enables this safety feature. Never
overload an electrical outlet. The overall system load should not exceed 80 percent of the branch
circuit rating. Consult an electrician for more information if you have questions about power loads
and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close
to the equipment. Do not fully extend power cords in a way that will stress the cords.
Be sure that the power outlet provides the correct voltage and current for the product you are
installing.
Carefully connect and disconnect the equipment from the electrical outlet.
Power supply statement
DANGER
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
© Copyright Lenovo 2015
ix
External devices
CAUTION:
Do not connect or disconnect any external device cables other than USB cable while the computer
power is on; otherwise, you might damage your computer. To avoid possible damage to attached
devices, wait at least five seconds after the computer is shut down to disconnect external devices.
General battery notice
DANGER
Batteries supplied by Lenovo for use with your product have been tested for compatibility and
should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a
disassembled or modified battery is not covered by the warranty.
Battery abuse or mishandling can cause overheat, liquid leakage, or an explosion. To avoid possible
injury, do the following:
• Do not open, dissemble, or service any battery.
• Do not crush or puncture the battery.
• Do not short-circuit the battery, or expose it to water or other liquids.
• Keep the battery away from children
• Keep the battery away from fire.
Stop using the battery if it is damaged, or if you notice any discharge or the buildup of foreign
materials on the battery leads.
Store the rechargeable batteries or products containing the rechargeable batteries at room
temperature, charged to approximately 30 to 50% of capacity. We recommend that the batteries be
charged about once per year to prevent overdischarge.
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply
with local ordinances or regulations.
Notice for built-in rechargeable battery
DANGER
Do not attempt to replace the built-in rechargeable battery. Replacement of the battery must be
done by a Lenovo-authorized repair facility or technician.
Only recharge the battery strictly according to instructions included in the product documentation.
The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local
laws and regulations.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Notice for non-rechargeable coin-cell battery
DANGER
If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The battery contains
a small amount of harmful substance.
Do not heat to more than 100°C (212°F).
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Heat and product ventilation
DANGER
Computers, ac power adapters, and many accessories can generate heat when turned on and when
batteries are charging. Notebook computers can generate a significant amount of heat due to their
compact size. Always follow these basic precautions:
• When your computer is turned on or the battery is charging, the base, the palm rest, and some
other parts may become hot. Avoid keeping your hands, your lap, or any other part of your
body in contact with a hot section of the computer for any extended length of time. When you
use the keyboard, avoid keeping your palms on the palm rest for a prolonged period of time.
Your computer generates some heat during normal operation. The amount of heat depends on
the amount of system activity and the battery charge level. Extended contact with your body,
even through clothing, could cause discomfort or even a skin burn. Periodically take breaks
from using the keyboard by lifting your hands from the palm rest; and be careful not to use
the keyboard for any extended length of time.
• Do not operate your computer or charge the battery near flammable materials or in explosive
environments.
• Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and
reliable operation. These features might inadvertently become blocked by placing the product on
a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.
• When the ac power adapter is connected to an electrical outlet and your computer, it generates
heat. Do not place the adapter in contact with any part of your body while using it. Never use the
ac power adapter to warm your body. Extended contact with your body, even through clothing,
may cause a skin burn.
For your safety, always follow these basic precautions with your computer:
• Keep the cover closed whenever the computer is plugged in.
• Regularly inspect the outside of the computer for dust accumulation.
• Remove dust from vents and any perforations in the bezel. More frequent cleanings might be
required for computers in dusty or high-traffic areas.
• Do not restrict or block any ventilation openings.
© Copyright Lenovo 2015
xi
• Do not operate your computer inside furniture, as this might increase the risk of overheating.
• Airflow temperatures into the computer should not exceed 35°C (95°F).
Electrical current safety information
DANGER
Electric current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
• Do not use your computer during a lightning storm.
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet.
• Connect to properly wired outlets any equipment that will be attached to this product.
• Whenever possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• Disconnect all attached cables and disable batteries before opening any accessible device
covers unless instructed otherwise in the installation and configuration procedures.
• Do not use your computer until all internal parts enclosures are fastened into place. Never use
the computer when internal parts and circuits are exposed.
DANGER
Connect and disconnect cables as described in the following procedures when installing, moving,
or opening covers on this product or attached devices.
To connect:
To disconnect:
1. Turn everything OFF.
1. Turn everything OFF.
2. First, attach all cables to devices.
2. First, remove power cords from outlets.
3. Attach signal cables to connectors.
3. Remove signal cables from connectors.
4. Attach power cords to outlets.
4. Remove all cables from devices.
5. Turn devices ON.
The power cord must be disconnected from the wall outlet or receptacle before installing all other
electrical cables connected to the computer.
The power cord may be reconnected to the wall outlet or receptacle only after all other electrical
cables have been connected to the computer.
DANGER
During electrical storms, do not perform any replacement and do not connect the telephone cable
to or disconnect it from the telephone outlet on the wall.
xii
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Liquid crystal display (LCD) notice
CAUTION:
The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can
cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your
hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are
present after washing, get medical care.
Using headphones or earphones
CAUTION:
Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of
the equalizer to maximum increases the earphone and headphone output voltage and the sound
pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.
Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the
output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The
headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification
limits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect against
hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7
limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN
50332-2 can be dangerous due to excessive sound pressure levels.
If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of
the headphones or earphones and the computer already complies with the specifications of EN 50332-1.
If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5
Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to
excessive sound pressure levels.
Additional safety information
Plastic bag notice
DANGER
Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger
of suffocation.
Glass parts notice
CAUTION:
Some parts of your product may be made of glass. This glass could break if the product is dropped
on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove
it. Stop using your product until the glass is replaced by trained service personnel.
Polyvinyl Chloride (PVC) cable and cord notice
Many personal computer products and accessories contain cords, cables or wires, such as power cords or
cords to connect the accessory to a personal computer. If this product has such a cord, cable or wire, then
the following warning applies:
WARNING: Handling the cord on this product or cords associated with accessories sold with this product
will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
© Copyright Lenovo 2015
xiii
xiv
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 1. Product overview
This chapter provides information about the locations of connectors, locations of important product labels,
computer features, specifications, operating environment, and preinstalled programs.
This chapter contains the following topics:
•
“Locating computer controls, connectors, and indicators” on page 1
•
“Locating important product information” on page 8
•
“Features” on page 10
•
“Specifications” on page 11
•
“Operating environment” on page 11
•
“Lenovo programs” on page 12
Locating computer controls, connectors, and indicators
This section introduces the computer hardware features to give you the basic information you will need
to start using the computer.
Front view
Note: Depending on the model, your computer might look different from the following illustration.
1 Microphones
2 Camera
3 Ambient light sensor
4 Fingerprint reader
5 System-status indicator
6 Trackpad
© Copyright Lenovo 2015
7 TrackPoint® buttons (available on some models)
Windows®
button
8 TrackPoint pointing stick
10 Multi-touch screen
Microphones
The microphones capture sound and voice when used with a program capable of handling audio.
Camera
Use the camera to take pictures or hold a video conference. For more information, see “Using the camera”
on page 41.
Ambient light sensor
The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen
brightness accordingly.
Fingerprint reader (available on some models)
Fingerprint authentication technology provides simple and secure user access by associating your fingerprint
with a password. For more information, see “Using the fingerprint reader” on page 59.
System-status indicator
The illuminated dot in the ThinkPad® logo functions as a system-status indicator. For more information, see
“Status indicators” on page 6.
ThinkPad pointing device
Trackpad
TrackPoint buttons
TrackPoint pointing stick
The keyboard contains the ThinkPad pointing device. Pointing, selecting, and dragging are all part of a single
process that you can perform without moving your fingers from a typing position. For more information, see
“Using the ThinkPad pointing device” on page 31.
Windows button
Press the Windows button to open the Start menu; or press the Windows button to wake up the computer
from sleep mode.
10
Multi-touch screen
Your computer comes with a multi-touch screen. For more information, see “Using the multi-touch screen”
on page 28.
Right-side view
Note: Depending on the model, your computer might look different from the following illustration.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
1 Power button
2 Volume-control buttons
3 USB 3.0 connectors
4 Mini DisplayPort connector
5 High-Definition Multimedia Interface (HDMI™)
connector
6 Security-lock slot
Power button
Press the power button to turn on the computer or put the computer into sleep mode. For information about
how to turn off the computer, see “Frequently asked questions” on page 15.
If your computer is unresponsive, you can turn off the computer by pressing and holding the power button
for four or more seconds. If the computer cannot be turned off, see “Computer stops responding” on
page 89 for more information.
You also can define what the power button does. For example, by pressing the power button, you can turn
off the computer or put the computer into sleep or hibernation mode. To change what the power button
does, do the following:
1. From the desktop, click the battery-status icon in the Windows notification area on the taskbar.
2. Click More power options ➙ Choose what the power buttons do.
3. Follow the instructions on the screen.
Volume-control buttons
The volume-control buttons enable you to adjust the volume while you are using your computer in the
tablet mode.
USB 3.0 connectors
The Universal Serial Bus (USB) 3.0 connectors are used for connecting USB-compatible devices, such
as a USB keyboard or a USB mouse.
Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward.
Otherwise the connector might get damaged.
Mini DisplayPort connector
Use the mini DisplayPort® connector to connect your computer to a compatible projector, external monitor,
or high-definition television. This compact connector enables a plug-and-play setup and supports adapters
that can plug into Digital Visual Interface (DVI), Video Graphics Array (VGA), or High-Definition Multimedia
Interface (HDMI™) connectors. The mini DisplayPort connector of your computer supports audio as well as
video streaming. For more information, see “Using an external display” on page 34.
HDMI connector
Use the High-Definition Multimedia Interface (HDMI) connector to connect the computer to an
HDMI-compatible audio device or video monitor, such as a high-definition television (HDTV).
Security-lock slot
To protect your computer from theft, purchase a security cable lock, usually a Kensington-style cable lock,
that fits this security-lock slot to lock your computer to a stationary object.
Note: You are responsible for evaluating, selecting, and implementing the locking device and security
feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance
of the locking device and security feature.
Chapter 1. Product overview
Left-side view
Note: Depending on the model, your computer might look different from the following illustration.
1 ac power connector
2 OneLink+ connector
3 Always On USB connector (USB 3.0 connector)
4 Audio connector
5 Media-card slot
6 ThinkPad Pen Pro (available on some models)
ac power connector
Connect the ac power adapter to the power connector to provide ac power to the computer and charge
the battery.
OneLink+ connector
Use the OneLink+ connector to connect to the ThinkPad OneLink+ Dock or to connect to the OneLink+
Ethernet Adapter. With the OneLink+ Ethernet Adapter, you can connect the computer to a local area
network (LAN).
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector
on the OneLink+ Ethernet Adapter. You can only connect an Ethernet cable to this connector.
Depending on the country or region of delivery, a OneLink+ Ethernet Adapter might be a part of the shipping
contents that come with your computer. If your computer does not come with the OneLink+ Ethernet
Adapter, you can purchase one from Lenovo at:
http://www.lenovo.com/accessories/services/index.html
The Ethernet connector on the OneLink+ Ethernet Adapter has two network status indicators. When the
green indicator is on, the computer is connected to a LAN. When the yellow indicator blinks, data is being
transmitted.
For instructions on how to use the ThinkPad OneLink+ Dock, see “ThinkPad OneLink+ Dock” on page 45.
Always On USB connector (USB 3.0 connector)
By default, the Always On USB connector enables you to charge some mobile digital devices and
smartphones when your computer is in the following situations:
• When your computer is on or in sleep mode
• When your computer is in hibernation mode or is turned off, but connected to ac power
If you want to charge these devices when your computer is in hibernation mode or is turned off, and the
computer is not connected to ac power, start the Lenovo Settings program, click Power, and then follow the
instructions on the screen. For instructions on how to open the Lenovo Settings program, see “Accessing
Lenovo programs” on page 12.
Attention: When you attach a USB cable to the connector, ensure that the USB mark is facing upward.
Otherwise the connector might get damaged.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
4
Audio connector
Connect headphones or a headset that has a 3.5-mm (0.14-inch) 4-pole plug to the audio connector to
listen to the sound from the computer.
Notes:
• If you are using a headset with a function switch, do not press this switch while using the headset. If
you press it, the headset microphone will be disabled, and the integrated microphones on the computer
will be enabled instead.
• The audio connector does not support a conventional microphone. For more information, see “Using
audio features” on page 41.
Media-card slot
Your computer is equipped with a media card reader, which provides a media-card slot. Insert your flash
media card into the media-card slot to read the data on the card. For more information about the supported
cards, see “Using a flash media card” on page 42.
ThinkPad Pen Pro (available on some models)
Depending on the model, your computer might have a ThinkPad Pen Pro installed. Use the ThinkPad Pen
Pro to interact with your computer. For more information, see “ThinkPad Pen Pro” on page 24.
Bottom view
Note: Depending on the model, your computer might look different from the following illustration.
1 Emergency-reset hole
2 Speakers
Emergency-reset hole
If the computer stops responding and you cannot turn it off by pressing the power button, remove the
ac power adapter first. Then insert a needle or a straightened paper clip into the emergency-reset hole
to reset the computer.
Speakers
Your computer is equipped with a pair of stereo speakers.
Chapter 1. Product overview
Rear view
Note: Depending on the model, your computer might look different from the following illustration.
1 Micro-SIM-card slot (available on some models)
2 Fan louvers
Micro-SIM-card slot
If your computer supports the wireless Wide Area Network (wireless WAN) feature, a micro Subscriber
Identification Module (SIM) card might be required to establish wireless WAN connections. Depending on
the country or region of delivery, the micro SIM card might be already installed in this slot.
Fan louvers
The fan louvers and internal fan enable air to circulate in the computer and to ensure proper cooling,
especially the cooling of the microprocessor.
Notes:
• To ensure proper airflow, do not place any obstacles in front of the fan louvers.
• The fan louvers of your computer might get too hot when the computer is running heavy tasks. When you
are using or carrying the computer, take care to avoid direct contact to the fan louvers.
Status indicators
Your computer has six status indicators.
Note: Depending on the model, your computer might look different from the illustrations in this topic.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
1
Fn Lock indicator
The Fn Lock indicator shows the status of the Fn Lock function. For more information, see “Using the
special keys” on page 22.
Speaker-mute indicator
When the speaker-mute indicator is on, the speakers are muted.
Microphone-mute indicator
When the microphone-mute indicator is on, the microphones are muted.
Camera-status indicator
When the camera-status indicator is on, the camera is in use.
System-status indicators
There are two ThinkPad logos on your computer, one on the palm rest and the other on the outer lid.
The illuminated dot in each ThinkPad logo works as a system-status indicator and helps you identify the
status of your computer.
Chapter 1. Product overview
• Blink for three times: The computer is initially connected to power.
• Blink fast: The computer is entering hibernation mode.
• Blink slowly: The computer is in sleep mode.
• Off: The computer is off or in hibernation mode.
• On: The computer is on (in normal use).
ac power-satus indicator
The ac power-status indicator shows the ac power charging status of the computer.
• Green: Connected to ac power (charging 80%-100%)
• Amber: Connected to ac power (charging 1%-80%)
• Off: Not connected to ac power (no charging)
Locating important product information
This section provides information to help you locate the machine type and model label, FCC ID and IC
Certification information, and the Genuine Microsoft label.
Machine type and model label
The machine type and model label identifies your computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify your computer and provide faster service.
The following illustration shows the location of the machine type and model of your computer.
FCC ID and IC Certification information
The FCC and IC Certification information is identified by a label located on the computer base cover as
shown in the following illustration.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
For a preinstalled wireless module, this label identifies the actual FCC ID and IC certification number for the
wireless module installed by Lenovo.
Note: Do not remove or replace a preinstalled wireless module by yourself. For module replacement, you
must contact Lenovo service first. Lenovo is not responsible for any damage caused by unauthorized
replacement.
Labels for the Windows operating systems
Windows 7 Certificate of Authenticity: Computer models preinstalled with the Windows 7 operating
system have a Certificate of Authenticity label affixed to the computer cover or inside the battery
compartment. The Certificate of Authenticity is your indication that the computer is licensed for a Windows 7
product and is preinstalled with a Windows 7 genuine version. In some cases, an earlier Windows version
might be preinstalled under the terms of the Windows 7 Professional license downgrade rights. Printed on
the Certificate of Authenticity is the Windows 7 version for which the computer is licensed and the Product
ID. The Product ID is important in case you need to reinstall the Windows 7 operating system from a source
other than a Lenovo product recovery disc set.
Windows 8, Windows 8.1, and Windows 10 Genuine Microsoft label: Depending on your geographic
location, the date when your computer was manufactured, and the version of Windows 8, Windows 8.1,
or Windows 10 that is preinstalled, your computer might have a Genuine Microsoft label affixed to its
cover. See http://www.microsoft.com/en-us/howtotell/Hardware.aspx for illustrations of the various types
of Genuine Microsoft labels.
• In the People’s Republic of China, the Genuine Microsoft label is required on all computer models
preinstalled with any version of Windows 8, Windows 8.1, or Windows 10.
• In other countries and regions, the Genuine Microsoft label is required only on computer models licensed
for Windows 8 Pro, Windows 8.1 Pro, or Windows 10 Pro.
The absence of a Genuine Microsoft label does not indicate that the preinstalled Windows version is not
genuine. For details on how to tell whether your preinstalled Windows product is genuine, refer to the
information provided by Microsoft at http://www.microsoft.com/en-us/howtotell/default.aspx.
Unlike Windows 7 products, there are no external, visual indicators of the Product ID or Windows version for
which the computer is licensed. Instead, the Product ID is recorded in the computer firmware. Whenever a
Chapter 1. Product overview
Windows 8, Windows 8.1, or Windows 10 product is installed, the installation program checks the computer
firmware for a valid, matching Product ID to complete the activation.
In some cases, an earlier Windows version might be preinstalled under the terms of the Windows 8 Pro,
Windows 8.1 Pro, or Windows 10 Pro license downgrade rights.
Features
The computer features introduced in this section cover a variety of models. For your specific model, some
features might vary or not apply.
Processor
To view the microprocessor information of your computer, do either of the following:
• Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all
programs, and then click Settings ➙ System ➙ About.
• Right-click the Start button
and then select System.
Memory
Up to 8 GB DDR3L (double data rate 3 low voltage) RAM (random access memory)
Storage device
Depending on the model:
• 2.5-inch form factor, 7-mm height hard disk drive
• 2.5-inch form factor, 7-mm height solid-state drive
• 2.5-inch form factor, 7-mm height hybrid drive
• M.2 solid-state drive for cache only
Display
• Multi-touch screen
• Display size: 355.6 mm (14 inches)
• Display resolution: 1920 x 1080 pixels or 2560 x 1440 pixels, depending on the model
• Color display with the thin-film transistor (TFT) technology
• Brightness control
• Integrated camera and microphones on the computer display
Keyboard
• Function keys
• Keyboard frame travel function
• Six-row backlight keyboard
• ThinkPad pointing device
Interface
• ac power connector
• Always On USB 3.0 connector
• Audio connector
10
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
• OneLink+ connector
• 4-in-1 media-card slot
• HDMI connector
• Mini DisplayPort connector
• Two USB 3.0 connectors
• Volume-control buttons
• Windows button
Wireless features
• Bluetooth
• Wireless LAN
• Wireless WAN (available on some models)
Security feature
• Trusted Platform Module (TPM) (available on some models)
• Fingerprint reader (available on some models)
Specifications
This section lists the physical specifications for your computer.
Size
• Width: 338 mm (13.3 inches)
• Depth: 236.3 mm (9.3 inches)
• Height: 19.9 mm (0.78 inch)
Heat output
• 45 W (154 Btu/hr) maximum
• 65 W (222 Btu/hr) maximum
Power source (ac power adapter)
• Sine-wave input at 50–60 Hz
• Input rating of the ac power adapter: 100-240 V ac, 50-60 Hz
Operating environment
Environment:
• Maximum altitude without pressurization: 3048 m (10 000 ft)
• Temperature
– At altitudes up to 2438 m (8000 ft)
– Operating: 5.0°C (41°F) to 35.0°C (95°F)
– Storage: 5.0°C (41°F) to 43.0°C (109°F)
– At altitudes above 2438 m (8000 ft)
– Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)
Chapter 1. Product overview
11
Note: When you charge the battery pack, its temperature must be at least 10°C (50°F).
• Relative humidity:
– Operating: 8%-80%
– Storage: 5%-95%
If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
Keep electrical appliances such as an electric fan, a radio, an air conditioner, and a microwave oven away
from your computer. The strong magnetic fields generated by these appliances can damage the monitor and
data on the hard disk drive or hybrid drive.
Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilled on
or in the computer or an attached device, a short circuit or other damage might occur.
Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.
Lenovo programs
Your computer comes with Lenovo programs to help you work easily and securely.
Note: The available programs are subject to change without notice.
To learn more about the programs and other computing solutions offered by Lenovo, go to:
http://www.lenovo.com/support
Accessing Lenovo programs
To access Lenovo programs on your computer, do the following:
1. Click the Start button to open the Start menu. Locate a program by the program name.
2. If the program is not displayed in the Start menu, click All apps to display all programs.
3. If you still do not find the program in the program list, search for the program in the search box.
An introduction to Lenovo programs
This topic provides a brief introduction to Lenovo programs. Depending on your computer model, some of
the programs might not be available.
Active Protection System™
The Active Protection System program protects your internal storage drive (such
as hard disk drive) when the shock sensor inside your computer detects a
condition that could damage the drive, such as system tilt, excessive vibration,
or shock.
The internal storage drive is less vulnerable to damage when it is not operating.
This is because when the internal storage drive is not operating, the system
stops it from spinning, and might also move the read and write heads of the
drive to areas that do not contain data.
As soon as the shock sensor senses that the environment is stable again
(minimal change in system tilt, vibration, or shock), it turns on the internal
storage drive.
Auto Scroll Utility
12
This program enhances your experience with window operation. The window
position of a foreground application is automatically adjusted.The scroll bar on a
user interface is also automatically adjusted.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Hotkey Features Integration
Hotkey Features Integration is a utility package that enables you to select and
install utility programs specifically for the special keys and buttons on your
computer. The special keys and buttons are designed to meet accessibility and
usability requirements. Installing related utility programs enables full functionality
of the special keys and buttons.
Lenovo Companion
Your system’s best features should be easy to access and understand. With
Companion, they are.
Use Lenovo Companion to do the following:
• Optimize your computer’s performance, monitor your computer’s health,
and manage updates.
• Access your user guide, check warranty status, and view accessories
customized for your computer.
• Read how-to articles, explore Lenovo forums, and stay up-to-date on
technology news with articles and blogs from trusted sources.
Lenovo Companion is filled with exclusive Lenovo content to help you learn
about what you can do with your computer.
Lenovo ID
The Lenovo ID program enables you to create and manage your Lenovo ID. With
a Lenovo ID, you can connect to everything Lenovo through a single account.
Use your Lenovo ID for quick and simple authentication and then enjoy the
various services provided by Lenovo. Such services include online shopping,
app download, personalized device support, special promotional offers, Lenovo
forums, and so on.
Lenovo PC Experience
The Lenovo PC Experience program helps you work more easily and securely by
providing easy access to various programs, such as Active Protection System
and Lenovo Solution Center.
Note: This program cannot be found from the all program list or search box.
To access this program, go to Control Panel. View Control Panel by Category,
click Hardware and Sound ➙ Devices and Printers, and then double-click
the device with your computer name.
Lenovo Settings
The Lenovo Settings program enables you to enhance your computing
experience by turning your computer into a portable hotspot, configuring
camera and audio settings, optimizing your power settings, and creating and
managing multiple network profiles.
Lenovo Solution Center
The Lenovo Solution Center program enables you to troubleshoot and resolve
computer problems. It combines diagnostic tests, system information collection,
security status, and support information, along with hints and tips for optimal
system performance.
Mobile Broadband Connect
The Mobile Broadband Connect program enables you to connect the computer
to the mobile broadband network through a supported wireless WAN card.
Recovery Media
The Recovery Media program enables you to restore the contents of the hard
disk drive to the factory default settings.
WRITEit
WRITEit gives you instant handwriting input wherever you need it. You can write
directly in any app and text field, edit text in real-time, see your full screen, and
convert your handwriting into digital text.
Chapter 1. Product overview
13
14
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 2. Using your computer
This chapter provides information on using some of the computer components.
This chapter contains the following topics:
•
“Registering your computer” on page 15
•
“Frequently asked questions” on page 15
•
“Using the tablet buttons” on page 22
•
“Getting help about the Windows operating system” on page 16
•
“Using the multi-touch screen” on page 28
•
“Operating modes” on page 17
•
“Using the keyboard” on page 26
•
“Using the special keys” on page 22
•
“Using the ThinkPad pointing device” on page 31
•
“Power management” on page 35
•
“Connecting to the network” on page 37
•
“Using an external display” on page 39
•
“Using the NVIDIA Optimus Graphics feature” on page 40
•
“Using audio features” on page 41
•
“Using the camera” on page 41
•
“Using a flash media card” on page 42
Registering your computer
When you register your computer, information is entered into a database, which enables Lenovo to contact
you in case of a recall or other severe problem. In addition, some locations offer extended privileges and
services to registered users.
When you register your computer with Lenovo, you also will receive the following benefits:
• Quicker service when you call Lenovo for help
• Automatic notification of free software and special promotional offers
To register your computer with Lenovo, go to http://www.lenovo.com/register and follow the instructions on
the screen to register your computer.
Frequently asked questions
The following are a few tips that will help you optimize the use of your computer.
To ensure that you receive the best performance from your computer, go to the following Web page
to find information such as aids for troubleshooting and answers to frequently asked questions:
http://www.lenovo.com/support/faq
Can I get my user guide in another language?
© Copyright Lenovo 2015
15
• To download the user guide in another language, go to: http://www.lenovo.com/support. Then follow
the instructions on the screen.
How to turn off my computer?
Open the Start menu, click the power icon
, and then click Shut down.
How do I access Control Panel?
•
Right-click the Start button, then click Control Panel.
How do I use battery power more effectively when I am on the go?
• To conserve power, or to suspend operation without exiting applications or saving files, see “Power-saving
modes” on page 37.
• To achieve the best balance between performance and power saving, create and apply power plans.
See “Managing the battery power” on page 36.
How do I securely dispose of data stored on the storage drive?
• Study Chapter 5 “Security” on page 53 to find out how you can protect your computer from theft and
unauthorized use.
• Use the Password Manager program to protect the data stored on your computer. For details, see the
help information system of the program.
• Before you dispose of the data on the storage drive, be sure to read “Notice on deleting data from
your storage drive” on page 62.
How do I give presentations or attach an external display?
• Ensure that you follow the procedure for “Using an external display” on page 39.
• With the Extend desktop function, you can display output on both the computer display and an external
monitor.
I have been using the computer for some time already, and it is getting slower. What should I do?
• Follow the “General tips for preventing problems” on page 83.
• You can diagnose problems yourself by using the preinstalled diagnostic software.
• Check for recovery solutions in Chapter 9 “Recovery overview” on page 105.
Print the following sections and keep them with your computer in case you are unable to access this
online user guide when necessary.
•
“Installing the Windows 10 operating system” on page 65
•
“Computer stops responding” on page 89
•
“Power problems” on page 100
Getting help about the Windows operating system
The Windows help information system provides you with detailed information about using the Windows
operating system to help you get the most of your computer. To access the Windows help information
system, open the Start menu, and then click Get started. Additionally, you can search from the taskbar to
find help, apps, files, settings, and so on.
16
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Operating modes
This section provides information about the operating modes of your computer. Your computer provides
the notebook mode, stand mode, tablet mode, and tent mode that enable you to work more conveniently
in your working environment.
To provide your computer the flexibility of being used in various operating modes, the operating modes
are enabled by default.
This section contains the following topics:
•
“Rotating the computer display” on page 17
•
“Notebook mode” on page 18
•
“Stand mode” on page 18
•
“Tablet mode” on page 20
•
“Tent mode” on page 20
Rotating the computer display
This topic provides instructions on how to rotate the display of your computer properly. This topic also
provides information on the operating modes of your computer and corresponding display angle ranges.
You can open the computer display to any angle within a range of up to 360 degrees as shown in the
following illustration.
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
Note: Depending on the model, your computer might look different from the following illustration.
Chapter 2. Using your computer
17
Display angle for each operating mode
The angle between the front of the computer display and the keyboard is different in each operating mode.
The following table lists the angle range for each operating mode.
Table 1. Display angle for each operating mode
Notebook mode
Stand mode
Tablet mode
Tent mode
no more than 190 degrees
more than 190 degrees and
less than 350 degrees
360 degrees
no less than 270 degrees
and no more than 340
degrees
Notebook mode
You can use the computer in the notebook mode in scenarios that require using a keyboard and a mouse,
such as editing documents and writing e-mails.
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
Open the computer display slowly as shown in the following illustration. Your computer is now in the
notebook mode.
Note: Depending on the model, your computer might look different from the following illustration.
In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are
automatically enabled.
Stand mode
You can use your computer in the stand mode in scenarios that require limited interaction with the screen,
such as viewing photos and playing videos.
18
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
If your computer is in the notebook mode, do the following to turn the computer from the notebook mode
into the stand mode:
Note: Depending on the model, your computer might look different from the illustrations in this topic.
1. Slowly rotate the display clockwise until the back of the display is facing the base cover.
2. Position your computer as shown. Your computer is now in the stand mode.
In the stand mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically
disabled.
In the stand mode, you can use the special buttons to control your computer. For instructions on how to use
the special buttons, refer to “Using the tablet buttons” on page 22.
Chapter 2. Using your computer
19
Tablet mode
You can use the computer in the tablet mode in scenarios that require frequent interaction with the screen,
such as browsing the Web site.
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
If your computer is in the stand mode, do the following to turn the computer from the stand mode into
the tablet mode:
Note: Depending on the model, your computer might look different from the illustrations in this topic.
1. Position your computer as shown and slowly rotate the computer display clockwise.
2. Position your computer as shown. Your computer is now in the tablet mode. By default, the autorotate
feature is enabled.
In the tablet mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically
disabled. However, you can control some functions of your computer through the special buttons and the
multi-touch screen, without the use of the keyboard and the touch pad. For more information, refer to “Using
the tablet buttons” on page 22 and “Using the multi-touch screen” on page 28.
Tent mode
You can use your computer in the tent mode in scenarios that require limited interaction with the screen,
such as viewing photos and making a presentation.
20
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Attention: Do not rotate the computer display with too much force, otherwise the computer display
or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of
the computer display.
If your computer is in the tablet mode, do the following to turn the computer from the tablet mode into the
tent mode:
Note: Depending on the model, your computer might look different from the illustrations in this topic.
1. Slowly rotate your computer display anticlockwise to any angle within a range of 190 degrees to 359
degrees.
Note: The degrees refers to the angle degrees between the LCD and the keyboard.
2. Position your computer as shown. Your computer is now in the tent mode.
In the tent mode, the keyboard and the touch pad are automatically disabled. However, you can control
some functions of your computer through the special buttons and the multi-touch screen, without the use
of the keyboard and the touch pad. For more information, refer to “Using the tablet buttons” on page 22
and “Using the multi-touch screen” on page 28.
Chapter 2. Using your computer
21
Using the special buttons
The computer is equipped with special buttons as shown in the following illustration. You can control some
functions of your computer through the special buttons, without the use of the keyboard.
Power button: Press the power button to turn on the computer.
Volume-up button: Press the volume-up button to increase the speaker volume.
Volume-down button: Press the volume-down button to decrease the speaker volume.
4 Windows button: Press the Windows button to open the Start menu; or press the Windows button to
wake up the computer from sleep mode.
Using the special keys
The keyboard has several special keys, which consist of the function keys 1 , the Fn key 2 , and the
Windows key 3 .
Notes:
• Depending on the model, your computer might look different from the illustrations in this topic.
• In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are
automatically enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the ThinkPad
trackpad, and the TrackPoint pointing stick are automatically disabled.
22
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
1
Function keys
Fn key
You can configure the Fn key and function keys in the Keyboard Properties window by doing the following:
1. Go to Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.
2. Click Keyboard. In the Keyboard Properties window, click the Fn and function keys or ThinkPad
F1–F12 keys tab.
3. Select the options of your preference.
•
: Press Fn+Esc to disable or enable the Fn Lock function.
When the Fn Lock function is disabled: The Fn Lock indicator is off (default mode). To initiate the
special function printed as an icon on each key, press the function key directly. To input F1-F12, press
the Fn key and the corresponding function key.
When the Fn Lock function is enabled: The Fn Lock indicator turns on. To input F1-F12, press the
function keys directly. To initiate the special function printed as an icon on each key, press the Fn key
and the corresponding function key.
•
: Mutes or unmutes the speakers. When the speakers are muted, the speaker-mute indicator turns
on.
If you mute the sound and turn off your computer, the sound will remain muted when you turn on your
computer again. To turn on the sound, press the speaker mute key
key
, or the speaker volume-up key
•
: Decreases the speaker volume.
•
: Increases the speaker volume.
•
, the speaker volume-down
: Mutes or unmutes the microphones. When the microphones are muted, the microphone-mute
indicator turns on.
Chapter 2. Using your computer
23
If you mute the microphones and turn off your computer, the microphones will remain muted when you
turn on your computer again. To unmute the microphones, press the microphone mute key
•
: Darkens the display.
•
: Brightens the display.
You can temporarily change the computer display brightness by pressing the two keys. To change the
default brightness level, right-click the battery-status icon in the Windows notification area. Then click
Adjust screen brightness and make changes as desired.
: Switches the display output location between the computer display and an external monitor.
•
Note: You also can press Windows+P to switch between the computer display and an external monitor.
•
•
: Enables or disables the wireless networking features. For more information on the wireless features,
refer to “Wireless connections” on page 38.
: Controls the keyboard backlight
•
: Opens the Settings window.
•
: Opens the Cortana® Search box.
•
: Views the programs that you have opened.
•
: Views all the programs.
• Fn+Spacebar: Controls the keyboard backlight. Press Fn+Spacebar to change the modes of the
keyboard backlight.
Note: If your computer is installed with the Lenovo Settings 3.0 program or later version, there are
four modes for the keyboard backlight: Off, Low, High, and Auto. Otherwise, there are three modes
for the keyboard backlight: Off, Low, and High.
• Fn+End: Has the same function as the Insert key on a conventional keyboard.
• Fn+B: Has the same function as the Break key on a conventional keyboard.
• Fn+K: Has the same function as the ScrLK key on the conventional keyboard.
• Fn+P: Has the same function as the Pause key on the conventional keyboard.
• Fn+S: Has the same function as the SysRq key on the conventional keyboard.
Windows key
Press the Windows key to open the Start menu.
You also can use the Windows key together with another key to achieve other functions. For details, refer to
the help information system of the Windows operating system.
ThinkPad Pen Pro
Some computer models are equipped with the ThinkPad Pen Pro (an electronic pen). The ThinkPad Pen Pro
enables you to input text in a natural manner when you are taking notes, annotating Portable Document
Format (PDF) files, or drawing graphics together with applications capable of editing and sketching. When
you draw or write with the ThinkPad Pen Pro, keep the pen perpendicular to the display to achieve the
best line quality.
Use the ThinkPad Pen Pro instead of your finger in conditions such as the following:
24
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
• You need precise and detailed input, such as drawing a picture or using the handwriting mode.
• Too many elements are crowded on the screen, for example, when you are playing games.
• You want to keep your screen free from smudges.
• You have long fingernails and it is difficult for you to type.
Notes:
• The ThinkPad Pen Pro is not waterproof. Take care not to soak it or dip it in water.
• If your computer does not come with a ThinkPad Pen Pro, your computer does not support the use
of the pen.
• To purchase the ThinkPad Pen Pro, go to the Lenovo Support Web site:
http://www.lenovo.com/accessories
Using the ThinkPad Pen Pro
The following illustration shows the ThinkPad Pen Pro.
Tip
Eraser button
Click button
You can perform the following operations with the ThinkPad Pen Pro:
• To click or make a selection, tap the display once with the pen.
• To double-click, tap twice without pausing.
• To right-click, tap the tip 1 on the display and hold the pen there for one second, or press and hold the
click button 3 while tapping the tip 1 on the display.
• To erase ink, press and hold the eraser button 2 , tap the tip 1 on the display, and drag the pen across
the ink you want to erase.
Chapter 2. Using your computer
25
The ThinkPad Pen Pro is stored in the slot on the bottom side of the computer. To remove the pen from the
slot, slide the tab of the pen to the right side slightly, and then pull the pen out.
Charging the ThinkPad Pen Pro
To charge the pen, insert the pen slightly into the slot until it snaps into position. The pen will be fully
charged in about five minutes.
The following illustration is an example. You can insert the pen into the slot for charging no matter the
computer is in the notebook mode, stand mode, tent mode, or tablet mode.
Note: Ensure that your computer is on or in sleep mode. Otherwise, the pen will not be charged.
Using the keyboard
Your computer keyboard features the frame travel function. This topic provides information on the behavior
of the keyboard.
Notes:
• Depending on the model, your computer might look different from the illustrations in this topic.
• In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are
automatically enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the ThinkPad
trackpad, and the TrackPoint pointing stick are automatically disabled.
The following illustration shows the location of the keyboard.
26
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Behavior of the keyboard
The frame of the keyboard travels upward when you rotate the computer display from 190 degrees to 360
degrees. The following are some scenarios for using the keyboard:
• The frame of the keyboard does not travel when you rotate the computer display from 10 degrees to 190
degrees. The following illustration shows the keyboard when the keyboard frame does not travel.
• When you rotate the computer display from 190 degrees to 360 degrees, the frame of the keyboard
travels upward for about 2.0 mm (0.08 inch). The following illustration shows the keyboard after the
keyboard frame travels upward.
Chapter 2. Using your computer
27
Customizing the keyboard
You can customize the keyboard to achieve the extended functions of the keyboard.
To customize the keyboard, do the following:
1. Go to Control Panel.
2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then
follow the instructions on the screen.
Using the multi-touch screen
This topic provides instructions on how to use the multi-touch screen that is available on some models.
Notes:
• Your computer screen might look different from the following illustrations.
• Depending on the app you use, some gestures might not be available.
The following table introduces some frequently used gestures.
28
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Touch gesture (touch models
only)
Description
Touch: Tap.
Mouse action: Click.
Function: Open an app or perform an action on an open app, such as Copy,
Save, and Delete, depending on the app.
Touch: Tap and hold.
Mouse action: Right-click.
Function: Open a menu with multiple options.
Touch: Slide.
Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scroll
arrow.
Function: Scroll through items, such as lists, pages, and photos.
Touch: Drag an item to the desired location.
Mouse action: Click, hold, and drag an item.
Function: Move an object.
Touch: Move two fingers closer together.
Mouse action: Press the Ctrl key while scrolling the mouse wheel backward.
Function: Zoom out.
Touch: Move two fingers farther apart.
Mouse action: Press the Ctrl key while scrolling the mouse wheel forward.
Function: Zoom in.
Touch: Put two or more fingers on an item and then rotate your fingers clockwise
or counterclockwise.
Mouse action: If the app supports rotation, click the rotation icon.
Function: Rotate an item.
Touch: Swipe in from the right edge.
Mouse action: Click the action center icon
on the taskbar.
Function: Open the action center to see your notifications and quick actions.
Chapter 2. Using your computer
29
Touch gesture (touch models
only)
Description
Touch: Swipe in from the left edge.
Mouse action: Click the task-view icon
on the taskbar.
Function: View all your open windows in task view.
Touch: Swipe in from the bottom to top for full-screened app.
Mouse action: Move your cursor to the Windows notification area at the bottom
of the screen.
Function: View the taskbar.
Note: The full screen feature is available only on some apps. To open an app
on the title bar.
in full screen, click
• Short snap for full-screened app or when your computer is in tablet mode
Touch: Swipe downwards shortly from the top edge.
Mouse action: Move your cursor to the top edge of the screen.
Function: Show a hidden title bar.
• Long swipe when your computer is in tablet mode
Touch: Swipe in from the top edge to the bottom edge.
Mouse action: From the top edge of the screen, click and hold, move the
pointer to the bottom of the screen, and then release.
Function: Close the current app.
30
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Tips on using the multi-touch screen
• The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any
metallic object on the screen, which might damage the touch panel or cause it to malfunction.
• Do not use fingernails, gloved fingers, or inanimate objects for input on the screen.
• Regularly calibrate the accuracy of the finger input to avoid a discrepancy.
Tips on cleaning the multi-touch screen
• Turn off the computer before cleaning the multi-touch screen.
• Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the
multi-touch screen. Do not apply solvents to the cloth.
• Gently wipe the screen using a top-down motion. Do not apply any pressure on the screen.
Using the ThinkPad pointing device
The ThinkPad pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling. With the ThinkPad pointing device, you also can perform a variety of touch
gestures, such as rotating and zooming in or out.
The ThinkPad pointing device consists of the following two devices:
TrackPoint pointing device
Trackpad
By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled.
To change the settings, see “Customizing the ThinkPad pointing device” on page 34.
TrackPoint pointing device
The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling.
Chapter 2. Using your computer
31
The TrackPoint pointing device consists of a TrackPoint pointing stick and a set of TrackPoint buttons:
TrackPoint pointing stick
Left-click button (primary-click button)
Right-click button (secondary-click button)
Scroll bar
To use the TrackPoint pointing device, refer to the following instructions:
Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to
the pointing-stick nonslip cap. Use either thumb to press the left-click button or right-click button.
• Point
Use the TrackPoint pointing stick 1 to move the pointer on the screen. To use the pointing stick, apply
pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer moves
accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends
on the amount of pressure you apply to the pointing stick.
• Left-click
Press the left-click button 2 to select or open an item.
• Right-click
Press the right-click button 3 to display a shortcut menu.
• Scroll
Press and hold the dotted scroll bar 4 while applying pressure to the pointing stick in the vertical or
horizontal direction. Then you can scroll through the document, Web site, or apps.
Trackpad
The entire trackpad is sensitive to finger touch and movement. You can use the trackpad to perform all the
pointing, clicking, and scrolling functions of a traditional mouse.
32
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
The trackpad can be divided into two zones:
Left-click zone (primary-click zone)
Right-click zone (secondary-click zone)
To use the trackpad, refer to the following instructions:
• Point
Slide one finger across the surface of the trackpad to move the pointer accordingly.
• Left-click
Press the left-click zone 1 to select or open an item.
You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
• Right-click
Press the right-click zone 2 to display a shortcut menu.
You also can tap anywhere on the surface of the trackpad with two fingers to perform the right-click action.
• Scroll
Put two fingers on the trackpad and move them in the vertical or horizontal direction. This action enables
you to scroll through the document, Web site, or apps. Ensure that you position your two fingers slightly
apart from each other.
With the trackpad, you also can perform a variety of touch gestures. For information about using the touch
gestures, see “Trackpad touch gestures” on page 33.
Trackpad touch gestures
The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform
the same point and click actions as you would using a traditional mouse. You also can use the trackpad
to perform a variety of touch gestures.
This topic introduces the frequently used touch gestures such as tapping, dragging, and scrolling. For more
gestures, see the help information system of the ThinkPad pointing device.
Notes:
• When using two or more fingers, ensure that you position your fingers slightly apart.
• Some gestures are not available if the last action was done from the TrackPoint pointing device.
• Some gestures are only available when you are using certain apps.
Chapter 2. Using your computer
33
Tap
Tap anywhere on the trackpad
with one finger to select or open
an item.
Two-finger tap
Tap anywhere on the trackpad with
two fingers to display a shortcut
menu.
Two-finger scroll
Put two fingers on the trackpad
and move them in the vertical or
horizontal direction. This action
enables you to scroll through the
document, Web site, or apps.
Two-finger zoom out
Put two fingers on the trackpad and
move them closer together to zoom
out.
Two-finger zoom in
Put two fingers on the trackpad
and move them farther apart to
zoom in.
Swipe three fingers down
Put three fingers on the trackpad
and move them down to show the
desktop.
Swipe three fingers up
Put three fingers on the trackpad
and move them up to open the
task view to see all your open
windows.
Customizing the ThinkPad pointing device
You can customize the ThinkPad pointing device so you can use it more comfortably and efficiently. For
example, you can choose to enable the TrackPoint pointing device, the trackpad, or both. You also can
disable or enable the touch gestures.
To customize the ThinkPad pointing device, do the following:
1. Go to Control Panel.
2. Click Hardware and Sound ➙ Mouse. The Mouse Properties window is displayed.
3. In the Mouse Properties window, follow the instructions on the screen to complete the customization
Replacing the cap of the TrackPoint pointing stick
The cap 1 on the end of the TrackPoint pointing stick is removable. After you use the cap for a period of
time, you might consider replacing the cap with a new one.
Note: Ensure that you use a cap with grooves a as shown in the following illustration.
34
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Power management
When you use your computer away from electrical outlets, you depend on battery power to keep your
computer running. Different computer components consume power at different rates. The more you use the
power-intensive components, the faster you consume battery power.
Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enabling
you to take your work wherever you go. With ThinkPad batteries, you will be able to work longer without
being tied to an electrical outlet.
Checking the battery status
Move your pointer to the battery-status icon in the Windows notification area to check the battery status.
The battery-status icon displays the percentage of battery power remaining and how long you can use
your computer before you must charge the battery.
The rate at which you use battery power determines how long you can use the batteries of your computer
between charges. Because of different user habits and needs, it is difficult to predict how long a battery
charge will last. There are two main factors:
• How much energy is stored in the battery when you begin to work.
• The way you use your computer. For example:
– How often you access the storage drive.
– How bright you make the computer display.
– How often you use the wireless features.
Using the ac power
The power to run your computer can come either from the battery or from ac power. While you use ac
power, the batteries charge automatically.
Your computer comes with an ac power adapter and a power cord.
• ac power adapter: Converts ac power for notebook computer use.
• Power cord: Connects the ac outlet and the ac power adapter.
Connecting to ac power
To connect the computer to ac power, do the following:
Chapter 2. Using your computer
35
Attention: Using an improper power cord might cause severe damage to your computer.
Note: Ensure that you perform the actions in the order in which they are listed.
1. Connect the power cord to the ac power adapter.
2. Connect the ac power adapter to the power connector of the computer.
3. Connect the power cord into an electrical outlet.
Tips on using the ac power adapter
You can check the status of your battery at any time by looking at the battery meter at the bottom of
your display.
• When the ac power adapter is not in use, disconnect it from the electrical outlet.
• Do not bind the power cord tightly around the ac power adapter transformer pack when it is connected to
the transformer.
• Before you charge the battery, make sure that its temperature is at least 10°C (50°F).
• You can charge the battery when the ac power adapter is connected to the computer and the battery is
installed. You need to charge the battery in any of the following conditions:
– When you purchase a new battery
– When the battery meter at the bottom of your display shows that the battery power remaining is low.
– If the battery has not been used for a long time
Charging the battery
When you check battery status and find that the percentage of power remaining is low or when the power
alarm alerts you that the remaining power is low, you need to charge your battery or replace it with a
charged battery.
If an ac outlet is convenient, plug the ac power adapter into it, and then insert the connector into the
computer. The battery will be fully charged in about three to six hours. This is affected by the battery size
and the physical environment. The battery status indicator will let you know that the battery is charging, and
will also notify you when the battery is fully charged.
Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.
Maximizing the battery life
To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery-status icon in the Windows notification area.
• Always use power-saving modes, such as sleep mode, and hibernation mode.
Managing the battery power
To achieve the best balance between performance and power saving, adjust your power plan settings.
To access power plan settings, do the following:
1. Click the battery-status icon from the Windows notification area.
2. Click More power options ➙ Change plan settings.
3. Follow the instructions on the screen.
36
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
For more information, refer to the help information system of the program.
Power-saving modes
There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of the battery power.
• Sleep mode
In sleep mode, your work is saved to memory, and then the storage drive and the computer display are
turned off. When your computer wakes up, your work is restored within seconds.
To put your computer into sleep mode, open the Start menu, click the power icon
, then click Sleep.
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any
programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the storage drive, and then the computer turns off.
To put the computer into hibernation mode, define what the power button does first, then press the power
button to put the computer into hibernation mode. For more information, see “Right-side view” on page 2.
If you put your computer into hibernation mode with the wake-up function disabled, the computer does
not consume any power. The wake-up function is disabled by default. If you put your computer into
hibernation mode with the wake-up function enabled, the computer consumes a small amount of power.
To enable the wake-up function, do the following:
1. Go to Control Panel and click System and Security.
2. Click Administrative Tools.
3. Click Task Scheduler. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the left pane, select the task folder for which you want to enable the wake-up function. The
scheduled tasks are displayed.
5. Click a scheduled task, and then click the Conditions tab.
6. Under Power, select the check box for Wake the computer to run this task.
• Wireless off
When you are not using the wireless features, such as Bluetooth or wireless LAN, turn them off. This will
help conserve power. To turn off the wireless features, press the wireless-switching key
Connecting to the network
Your computer has one or more network cards that enable you to connect your computer to the Internet
and other network connections.
Ethernet connections
You can connect your computer to a local network or a broadband connection through the OneLink+
Ethernet Adapter or a supported ThinkPad OneLink+ Dock.
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector
on the OneLink+ Ethernet Adapter or the ThinkPad OneLink+ Dock.
Chapter 2. Using your computer
37
Wireless connections
Wireless connection is the transfer of data without the use of cables but by means of radio waves only.
In the Airplane mode, all wireless features are disabled. To disable the Airplane mode, open the Start menu
and then click Settings. If Settings is not displayed, click All apps to display all programs, and then click
Settings ➙ Network & Internet ➙ Airplane mode, and then slide the control to the left.
Depending on the wireless devices installed on your computer, you might be able to use the following
wireless networks:
• Wireless-LAN connection
• Wireless-WAN connection
• Bluetooth connection
Using the wireless-LAN connection
A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a
house. Devices based on the 802.11 standards can connect to this type of network.
Your computer comes with a wireless network card and a configuration utility to help you establish wireless
connections and monitor the connection status. This enables you to stay connected to your network while
you are at the office, in a meeting room, or at home, with no need for a wired connection.
To establish a wireless-LAN connection, do the following:
1. Click the wireless-network-connection-status icon in the Windows notification area. A list of available
wireless networks is displayed.
2. Double-click a network to connect to it. Provide required information if needed.
The computer automatically connects to an available wireless network when the location changes. For more
information, refer to the Windows help information system.
Tips for using the wireless LAN feature
To achieve the best connection, use the following guidelines:
• Place your computer so that there are as few obstacles as possible between the wireless LAN access
point and the computer.
• Open your computer lid to an angle of slightly more than 90 degrees.
• If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetooth
option, the data transmission speed can be delayed and the performance of the wireless feature can be
degraded.
Using the wireless WAN connection
Wireless Wide Area Network (wireless WAN) which uses cellular networks for data transmission, enables
you to establish wireless connections over remote public or private networks. These connections can be
maintained over a large geographical area, such as a city or an entire country, by use of multiple antenna
sites or satellite systems maintained by wireless service providers.
Some ThinkPad notebook computers come with a built-in wireless WAN card integrated with some wireless
WAN technologies, such as 1xEV-DO, HSPA, 3G, GPRS, or LTE. By using the built-in wireless WAN card and
the configuration utility that comes with your computer, you can establish wireless WAN connections and
monitor the connection status.
Note: The wireless WAN service is provided by authorized service providers in some countries.
38
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Tips for using the wireless WAN feature
To achieve the best connection, use the following guidelines:
• Keep your computer away from your body.
• Place your computer on a flat surface and open your computer lid to an angle of slightly more than
90 degrees.
• Place your computer away from concrete or brick walls that might dampen cellular signals.
• Best reception will be available near windows and other locations where cellular phone reception is the
strongest.
Using the Bluetooth connection
Bluetooth can connect devices a short distance from one another, and is commonly used for connecting
peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or
remotely controlling and communicating with devices such as mobile phones.
Depending on the model, your computer might support the Bluetooth feature. To transfer data through
the Bluetooth feature, do the following:
Note: If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a
Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature
can be degraded.
1. Ensure that the Bluetooth feature is enabled. Then do one of the following:
• Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all
programs, and then click Settings ➙ Devices ➙ Bluetooth. Turn on the Bluetooth feature.
• Open the Start menu and then click Settings. If Settings is not displayed, click All apps to
display all programs, and then click Settings ➙ Network & Internet ➙ Airplane mode. Turn on
the Bluetooth feature.
2. Right-click the data that you want to send.
3. Select Send To ➙ Bluetooth Devices.
4. Select a Bluetooth device, and then follow the instructions on the screen.
For more information, refer to the Windows help information system and the Bluetooth help information
system.
Using an external display
You can use an external display such as a projector or a monitor to give presentations or to expand your
workspace. This topic introduces how to connect an external display, choose display modes, and change
display settings.
For more information about the external display, refer to the manuals provided with it.
Connecting an external display
You can use either a wired display or a wireless display. The wired display can be connected to the HDMI
connector by a cable. The wireless display can be added through the Wi-Di or Miracast function.
• Connecting a wired display
Note: When you connect an external monitor, a video interface cable with a ferrite core is required.
1. Connect the external display to an appropriate video connector on your computer.
2. Connect the external display to an electrical outlet.
Chapter 2. Using your computer
39
3. Turn on the external display.
If your computer cannot detect the external display, right-click on the desktop, then click Display
settings ➙ Detect.
• Connecting a wireless display
Do one of the following:
Note: To use a wireless display, ensure that both your computer and the external display support the
Wi-Di or Miracast feature.
– Open the Start menu and then clickSettings. IfSettings is not displayed, clickAll apps to display all
programs, and then click Settings ➙ Devices ➙ Connected devices ➙ Add a device.
– Click the action center icon
on the taskbar. Click Connect. Select the desired wireless display and
follow the instructions on the screen.
For more information, refer to the Windows help information system
Choosing a display mode
You can display your desktop and apps on the computer display, the external display, or both. To choose
how to display the video output, press the display-mode switching key
mode you prefer.
and then select a display
There are four display modes:
• Disconnect: Displays the video output only on your computer screen.
Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or
Disconnect projector.
• Duplicate: Displays the same video output on both your computer screen and an external display.
• Extend: Extends the video output from your computer display to an external display. You can drag and
move items between the two displays.
• Projector only: Shows the video output only on an external display.
Note: Depending on the situation, you might see Projector only or Second screen only.
Note: If you show DOS or programs using DirectDraw or Direct3D® in full-screen mode, only the main
display shows the video output.
Changing display settings
You can change the settings for both the computer display and the external display. For example, you
can define which one is the main display and which one is the secondary display. You also can change
the resolution and orientation.
To change the display settings, do the following:
1. Right-click on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings as desired.
Using the NVIDIA Optimus Graphics feature
Some ThinkPad notebook computers support NVIDIA Optimus Graphics.
40
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
To achieve the best balance between the computer performance and a long battery life, depending on the
graphics quality demand of the running program and power plan settings that you use, the NVIDIA Optimus
Graphics feature automatically switches between High Performance Graphics and Energy Saving Graphics,
with no need to restart your computer, close programs, or intervene manually.
Using audio features
Your computer is equipped with the following:
• Microphones
Note: The left microphone and right microphone automatically switch between each other when the
computer screen rotates.
• Speakers
Note: The left speaker and right speaker automatically switch between each other when the computer
screen rotates.
• Combo audio connector, 3.5 mm (0.14 inch) in diameter
Your computer also has an audio chip that enables you to enjoy various multimedia audio features, such
as the following:
• Compliant with Intel High Definition Audio
• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3
(MP3) files
• Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files
• Recording from various sound sources, such as a headset attached
Note: The combo audio connector does not support a conventional microphone.
The following table shows which functions of the audio devices attached to the connectors on your computer
or the supported ThinkPad OneLink+ Dock are supported.
Table 2. Audio feature list
Connector
Headset with a 3.5 mm
(0.14–inch), 4-pole plug
Conventional
headphone
Conventional
microphone
Combo audio connector
Headphone and
microphone functions
supported
Headphone function
supported
Not supported
Configuring for sound recording
To configure the microphone for optimal sound recording, use the Conexant HD Audio Manager program. To
start the program, go to Control Panel and click Hardware and Sound ➙ Conexant HD Audio Manager.
Using the camera
If your computer has a camera, you can use the camera to preview your video image and take a snapshot
of your current image.
To start the camera, open the Start menu, and click Camera from the all apps list.
When the camera is started, the green camera-in-use indicator turns on.
Chapter 2. Using your computer
41
You also can use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the camera with other programs, open one of the programs
and start the photographing, video capturing, or video conferencing function. Then, the camera starts
automatically and the green camera-in-use indicator turns on. For more information about using the camera
with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do one of the following:
• Open the Camera app, click the options button in the upper-left corner, and then select Settings. Follow
the instructions on the screen to configure the camera settings as desired.
• Open the Camera app, click the settings icon in the upper-right corner. Follow the instructions on the
screen to configure the camera settings as desired.
Using a flash media card
Your computer has a media card slot, it supports the following cards:
• MultiMediaCard (MMC) module
• Secure Digital eXtended-Capacity(SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the CPRM feature for the SD card.
Attention: While transferring data to or from a flash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.
Installing a flash media card
Attention:
• Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any
static electricity from your body. Static electricity could damage the card.
To install a flash media card, do the following:
1. Ensure that the card is correctly oriented.
2. Insert the card firmly into the slot of the 4-in-1 media card reader.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable
the feature:
1. Go to Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a flash media card
Attention:
42
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
• Before removing a card, stop the card first. Otherwise, data on the card might get damaged or lost.
• Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system
might not respond when you try to resume operation.
To remove a card, do the following:
1. Click the triangular icon on the windows notification area to show hidden icons. Then, right-click the
Safely Remove Hardware and Eject Media icon.
2. Select the item you want to remove to stop the card.
3. Press the card to eject it from your computer.
4. Remove the card and store it safely for future use.
Note: If you do not remove the card from your computer after you eject the card from the Windows operating
system, the card can no longer be accessed. To access the card, you must remove it first, then insert it again.
Chapter 2. Using your computer
43
44
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 3. Enhancing your computer
This chapter provides instructions on how to use hardware devices to expand your computer capabilities.
•
“Finding ThinkPad options” on page 45
•
“ThinkPad OneLink+ Dock” on page 45
Finding ThinkPad options
If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and
upgrades to meet your needs. Options include storage devices, network cards, port replicators, batteries,
power adapters, printers, scanners, keyboards, mice, and more.
You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is an
Internet connection and a credit card.
To shop at Lenovo, go to:
http://www.lenovo.com/essentials
ThinkPad OneLink+ Dock
The ThinkPad OneLink+ Dock (hereafter referred to as dock) is an optional device that Lenovo designed
specifically for your computer. The dock provides convenience and makes your computer easier to use
for work, study, and entertainment. If your computer does not come with the dock, you can purchase one
from Lenovo at http://www.lenovo.com/accessories.
This topic provides basic information about the dock. For detailed information about using the dock, refer
to the documentation that comes with the dock.
Note: Depending on the model, your dock might look slightly different from the illustrations in this topic.
Front view
1 Security-lock slot: To protect your dock from theft, purchase a security cable lock, usually a
Kensington-style cable lock, that fits this security-lock slot to lock your dock to a stationary object.
Audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch), 4-pole plug.
USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
© Copyright Lenovo 2015
45
4 Always On USB connector: By default, the Always On USB connector enables you to charge some
mobile digital devices and smartphones when the dock is in the following situations:
• When the dock is in sleep or hibernation mode
• When the dock is turned off
For more information, refer to the documentation that comes with the dock.
Power button: The power button on the dock functions the same as the one on the computer.
6 System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the ones
on the computer. For details, see “Status indicators” on page 6.
Rear view
USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0.
2 DisplayPort connectors: Used to attach a high-performance monitor, a direct-drive monitor, or other
devices that use a DisplayPort connector.
Ethernet connector: Used to connect the dock to an Ethernet LAN.
USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
5 VGA connector: Used to connect the computer to a VGA-compatible video device, such as a VGA
monitor.
Power connector: Used to connect the ac power adapter.
7 OneLink+ connector: Connect the OneLink+ connector to the computer. To locate the corresponding
OneLink+ connector on the computer, see “Left-side view” on page 4.
46
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 4. You and your computer
This chapter provides information about accessibility, comfort, and traveling with your computer.
•
“Accessibility and comfort” on page 47
•
“Traveling with your computer” on page 51
Accessibility and comfort
Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort.
Arrange your workplace and the equipment you use to suit your individual needs and the kind of work
that you perform. In addition, use healthy work habits to maximize your performance and comfort while
using your computer.
The following topics provide information about arranging your work area, setting up your computer
equipment, and establishing healthy work habits.
Lenovo is committed to providing the latest information and technology to our customers with disabilities.
Refer to our accessibility information which outlines our efforts in this area. See “Accessibility information”
on page 48.
Ergonomic information
Working in the virtual office might mean adapting to frequent changes in your environment. Following some
simple rules will make things easier and bring you the maximum benefits of your computer. Keeping in mind
such basics as good lighting and proper seating, for example, can help you improve your performance
and achieve greater comfort.
This example shows someone in a conventional setting. Even when not in such a setting, you can follow
many of these tips. Develop good habits, and they will serve you well.
General posture: Make minor modifications in your working posture to deter the onset of discomfort
caused by long periods of working in the same position. Frequent short breaks from your work also help
to prevent minor discomfort associated with your working posture.
Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches).
Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the
display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the
brightness-down key
or the brightness-up key
to adjust display brightness.
Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
© Copyright Lenovo 2015
47
Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to
best suit your desired posture.
Arm and hand position: If available, use chair arm rests or an area on your working surface to provide
weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal)
position. Type with a soft touch without pounding the keys.
Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
What if you are traveling?
It might not be possible to observe the best ergonomic practices when you are using your computer
while on the move or in a casual setting. Regardless of the setting, try to observe as many of the tips as
possible. Sitting properly and using adequate lighting, for example, will help you maintain desirable levels
of comfort and performance.
Questions about vision?
The visual display screens of ThinkPad notebook computers are designed to meet the highest standards
and to provide you with clear, crisp images and large, bright displays that are easy to see, yet easy on the
eyes. Of course, any concentrated and sustained visual activity can be tiring. If you have questions on eye
fatigue or visual discomfort, consult a vision care specialist for advice.
Comfort
Observe the following guidelines to achieve greater comfort and improve performance.
Active sitting and rest breaks: The longer you sit and work with your computer, the more important it is to
observe your working posture. Follow “Ergonomic information” on page 47 and practice “active sitting” to
avoid discomfort associated with your working postures. Making minor voluntary postural changes and
taking short frequent work breaks are the key ingredients for healthy computing. Your computer is light and
mobile; you can easily reposition your working surface to accommodate many posture modifications.
Work area setup options: Familiarize yourself with all of your office furniture so that you know how to
adjust your work surface, seat, and other work tools to accommodate your preferences for comfort.
If your work area is not in an office setting, be sure to take special note of employing active sitting
and taking work breaks. Many ThinkPad product solutions are available to help you modify and expand
your computer to best suit your needs. Access the following Web site to view some of these options:
http://www.lenovo.com/essentials. Explore your options for docking solutions and external products that
provide the adjustability and features that you want.
Accessibility information
Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater
access to information and technology. This section provides information about the ways to help these
users get the most out of their computer experience. You also can get the most up-to-date accessibility
information from the following Web site:
http://www.lenovo.com/accessibility
Ease of Access Center
Ease of Access Center on the Windows operating system enables users to configure their computers to
suit their physical and cognitive needs.
To use Ease of Access Center, do the following:
1. Click the Start button to open the Start menu.
48
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
2. Click Control Panel ➙ Ease of Access ➙ Ease of Access Center.
3. Follow the instructions on the screen.
Ease of Access Center mainly includes the following tools:
• Magnifier
Magnifier is a useful utility that enlarges the entire screen or part of the screen so that you can see
the words and images better.
• Narrator
Narrator is a screen reader that reads what is displayed on the screen aloud and describes events like
error messages.
• On-Screen Keyboard
If you prefer to type or enter data into your computer without using a physical keyboard, you can use
On-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You
can select keys using the mouse or another pointing device, or you can tap to select the keys if your
computer supports multi-touch screen.
• High Contrast
High Contrast is a feature that heightens the color contrast of some text and images on your screen. As a
result, those items are more distinct and easier to identify.
• Personalized keyboard
Adjust keyboard settings to make your keyboard easier to use. For example, you can use your keyboard
to control the pointer and make the keyboard easier to type certain key combinations.
• Personalized mouse
Adjust mouse settings to make your mouse easier to use. For example, you can change the pointer
appearance and make your mouse easier to manage windows.
Speech Recognition
Speech Recognition enables you to control your computer by voice.
Using only your voice, you can start programs, open menus, click objects on the screen, dictate text into
documents, and write and send e-mails. Everything you do with the keyboard and mouse can be done with
only your voice.
To use Speech Recognition, do the following:
1. Click the Start button to open the Start menu.
2. Click Control Panel ➙ Ease of Access ➙ Speech Recognition.
3. Follow the instructions on the screen.
Screen-reader technologies
Screen-reader technologies are primarily focused on software program interfaces, help information systems,
and various online documents. For additional information about screen readers, see the following:
• Using PDFs with screen readers:
http://www.adobe.com/accessibility.html?promoid=DJGVE
• Using the JAWS screen reader:
http://www.freedomscientific.com/jaws-hq.asp
• Using the NVDA screen reader:
http://www.nvaccess.org/
Chapter 4. You and your computer
49
Screen resolution
You can make the text and images on your screen easier to read by adjusting the screen resolution of your
computer.
To adjust the screen resolution, do the following:
1. Right-click an empty area of the desktop and select Display settings ➙ Advanced display settings.
2. Select your preferred setting under Resolution.
Note: Setting a resolution too low might prevent some items from fitting on the screen.
Keyboard shortcuts
The following table contains keyboard shortcuts that can help make your computer easier to use.
Note: Some keyboard shortcuts might not be available on your computer.
Keyboard shortcut
Function
Windows logo key + U
Open Ease of Access Center
Right Shift for eight seconds
Turn on or turn off Filter Keys
Shift five times
Turn on or turn off Sticky Keys
Num Lock for five seconds
Turn on or turn off Toggle Keys
Left Alt+Left Shift+Num Lock
Turn on or turn off Mouse Keys
Left Alt+Left Shift+PrtScn (or PrtSc)
Turn on or turn off High Contrast
For more information, go to http://windows.microsoft.com/, and then type any of the following keywords
for searching: keyboard shortcuts, key combinations, shortcut keys.
Zoom
You can use the zoom feature to enlarge or reduce the size of text, pictures, maps, or other objects.
• From the keyboard:
– Zoom in: Press the Windows logo key + the plus-sign key (+) to enlarge the size of text, pictures,
maps, or other objects.
– Zoom out: Press the Windows logo key + the minus-sign (-) key to reduce the size of text, pictures,
maps, or other objects.
• From the touch screen:
– Zoom in: Move two fingers farther apart on the touch screen to enlarge the size of text, pictures,
maps, or other objects.
– Zoom out: Move two fingers closer together on the touch screen to reduce the size of text, pictures,
maps, or other objects.
Industry-standard connectors
Your computer provides industry-standard connectors that enable you to connect assistive devices.
For more information about the location and function of the connectors, see “Locating computer controls,
connectors, and indicators” on page 1.
Documentation in accessible formats
Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or
HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure
50
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
that visually impaired users can read the documentation through a screen reader. Each image in the
documentation also includes adequate alternative text so that visually impaired users can understand the
image when they use a screen reader.
Traveling with your computer
This topic provides information to help you work with your computer when you are traveling.
Travel tips
Use the following travel tips to travel more confidently and efficiently with your computer.
• Although it is safe to allow your computer to go through the x-ray machines at airport security stations, it
is important to keep your eyes on the computer at all times to prevent theft.
• Consider bringing an electrical adapter for use in an airplane or automobile.
• If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord.
Travel tips on airplanes
If you carry your computer into an airplane, take note of the following tips:
• If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with the
airline for restrictions and availability of services before boarding the airplane. If there are restrictions
on the use of computers with wireless features on the airplane, you must abide by those restrictions. If
necessary, enable the Airplane mode before boarding. In the Airplane mode, all wireless features are
disabled. To enable the Airplane mode, open the Start menu and then click Settings. If Settings is not
displayed, click All apps to display all programs, and then click Settings ➙ Network & Internet ➙
Airplane mode, and then slide the control to the right.
• Be careful about the seat in front of you on airplanes. Angle your computer display so that it does not get
caught when the person in front of you leans back.
• When taking off, remember to turn off your computer or put it into hibernation mode.
Travel accessories
The following is a checklist of items to consider packing when you are going to travel:
• ThinkPad ac power adapter
• ThinkPad AC/DC combo adapter
• External mouse (if you are accustomed to using one)
• A quality carrying case that provides adequate cushion and protection
• External storage device
• HDMI cable
• OneLink+ Ethernet Adapter
• ThinkPad OneLink+ Dock
• ThinkPad Onelink+ to VGA/RJ45 Adapter
If you are traveling to another country, you might need to consider an ac power adapter for the country to
which you are traveling.
To purchase travel accessories, go to http://www.lenovo.com/accessories.
Chapter 4. You and your computer
51
52
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 5. Security
This chapter provides information about how to protect your computer from theft and unauthorized use.
•
“Using passwords” on page 53
•
“Hard disk security” on page 57
•
“Setting the security chip” on page 58
•
“Using the fingerprint reader” on page 59
•
“Notice on deleting data from your storage drive” on page 62
•
“Using firewalls” on page 62
•
“Protecting data against viruses” on page 62
Using passwords
You can help prevent your computer from unauthorized use by using passwords. Once you set a password,
a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt.
You cannot use the computer unless you type the correct password.
If you have set a power-on password, a supervisor password, or a hard disk password, it unlocks
automatically when the computer resumes from sleep mode.
Note: If a Windows password has been set, you will be prompted to enter it.
Typing passwords
When this icon is displayed, type a power-on password or a supervisor password.
When this icon is displayed, type a user hard disk password. To type a master hard disk password,
press F1. When the icon changes to
Note: To return to the icon
, type the master hard disk password
, press F1 again.
Power-on password
You can set a power-on password to help protect your computer against unauthorized access.
If you set a power-on password, the password prompt is displayed on the screen whenever you turn on the
computer. You must enter the correct password to start using the computer.
Setting, changing, or removing a power-on password
Before you start, print these instructions.
To set, change, or remove a power-on password, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Password ➙ Power-on Password by using the directional keys.
© Copyright Lenovo 2015
53
4. Depending on your need, do one of the following:
• To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
• To change a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. In the Enter New Password field, type the new power-on password and press Enter; then retype
the password in the Confirm New Password field and Press Enter.
• To remove a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.
5. A Setup Notice window is displayed. Press Enter to continue.
6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget the
password, you have to take your computer to a Lenovo reseller or a marketing representative to have
the password canceled.
Supervisor password
The supervisor password protects the system information stored in the ThinkPad Setup program. If you have
set a supervisor password, no one can change the configuration of the computer without the password. It
provides the following security features:
• If only a supervisor password is set, a password prompt is displayed when you try to start the ThinkPad
Setup program. Unauthorized users cannot access the ThinkPad Setup program without the password.
• The system administrator can use the supervisor password to access a computer even if the user of that
computer has set a power-on password. The supervisor password overrides the power-on password.
• If both a supervisor password and a power-on password are set, you can do the following only if you
have the supervisor password:
– Changing or deleting the power-on password
– Changing or deleting the supervisor password
– Changing date and time
– Specifying the minimum length for power-on password and hard disk password
– Changing the setting for the security chip
– Enabling or disabling the following features:
– Lock UEFI BIOS Settings
– Password at unattended boot
– Boot Device List F12 Option
– Boot Order Lock
– Flash BIOS Updating by End-Users
– Internal network device
– Internal wireless device
– Internal Bluetooth device
54
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
– Internal Network Option ROM
– Security mode
Notes:
• The system administrator can set the same supervisor password on many ThinkPad notebook computers
to make administration easier.
• When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change
the settings, a supervisor password is required.
Setting, changing, or removing a supervisor password
Before you start, print these instructions.
Only a system administrator can set, change, or remove a supervisor password. To set, change, or remove a
supervisor password, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Password ➙ Supervisor Password by using the directional keys.
4. Depending on your needs, do one of the following:
• To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
• To change a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. In the Enter New Password field, type the new supervisor password and press Enter; then retype
the password in the Confirm New Password field and press Enter.
• To remove a password, do the following:
a. In the Enter Current Password field, type the current supervisor password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.
5. A Setup Notice window is displayed. Press Enter to continue.
6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Note: You might want to record your password and store it in a safe place. The next time you open the
ThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forget
your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo
reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
Hard disk passwords
The following two types of hard disk passwords can help protect the information stored on the hard disk
drive or hybrid drive:
• User hard disk password
If a user hard disk password has been set, but no master hard disk password has been, the user must
enter the user hard disk password to access files and applications on the hard disk drive or hybrid drive.
• Master hard disk password
Chapter 5. Security
55
The master hard disk password also requires a user hard disk password. The master hard disk password
is usually set and used by a system administrator. It enables the administrator to access any hard disk
drive or hybrid drive in a system like a master key. The administrator sets the master password; then
assigns a user password for each computer in the network. The user can then change the user password
as desired, but the administrator still can get access by using the master password.
When a master hard disk password is set, only the administrator can remove the user hard disk password.
Setting a hard disk password
Before you start, print these instructions.
To set a hard disk password, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Password ➙ Hard disk 1 Password by using the directional keys.
4. A password window is displayed. You are prompted to select User or User + Master. Select User if
you want to set only one hard disk password. Select User + Master if you want to set a user hard disk
password and a master hard disk password, for example if you are an administrator or a supervisor.
• If you select User, do the following:
a. When a window for typing the new password opens, type your new password in the Enter New
Password field and press Enter.
b. In the Confirm New Password field, retype the password you just entered and press Enter.
• If you select User + Master, do the following:
a. First, set a user hard disk password. When a message window prompts you to set the user hard
disk password, press Enter to continue. Type your new user hard disk password in the Enter
New Password field and press Enter. Retype the password in the Confirm New Password
field and press Enter.
b. Then, set a master hard disk password. When a message window prompts you to set the master
hard disk password. Press Enter to continue. Type your new master hard disk password in the
Enter New Password field and press Enter. Retype the password in the Confirm New Password
field and press Enter.
5. A Setup Notice window is displayed. Press Enter to continue.
6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
The next time you turn on your computer, type the user or master hard disk password to start your computer
and access the operating system.
Changing or removing a hard disk password
To change or remove the hard disk password, do the following:
• If you are in User + Master hard disk mode, you can select either User HDP or Master HDP to change
the password, depending on your needs.
– If you select User HDP mode, follow the following steps to change the user hard disk password:
1. Type the current user hard disk password in the Enter Current Password field and press Enter.
2. Type the new password in the Enter New Password field and press Enter; then retype the
password in the Confirm New Password field and press Enter.
3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password
is changed.
56
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Note: The hard disk password cannot be removed in User HDP mode.
– If you select Master HDP mode, follow the following steps to change the master hard disk password:
1. Type the current master hard disk password in the Enter Current Password field and press Enter.
2. Type the new master hard disk password in the Enter New Password field and press Enter; then
retype the new password you just entered in the Confirm New Password field and press Enter.
3. A Setup Notice window is displayed. Press Enter to continue. The master hard disk password is
changed.
Note: If you leave the Enter New Password and Confirm New Password fields blank and press Enter
twice, both the user and master hard disk passwords are removed.
• If you are in User hard disk mode, follow the following steps to change the user hard disk password:
1. Follow steps 1 through 7 in “Setting a hard disk password” on page 56, typing your password to
start the ThinkPad Setup program.
2. Type the current user hard disk password in the Enter Current Password field and press Enter.
3. Type the new password in the Enter New Password field and press Enter; then retype the new
password in the Confirm New Password field and press Enter.
4. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is
changed.
Note: If you leave the Enter New Password and Confirm New Password fields blank and press Enter
twice, the user hard disk password is removed.
Tips on using the hard disk passwords
• You can set the minimum length of a hard disk password through the Security menu.
• If you set a hard disk password of over seven characters, the hard disk drive or hybrid drive can be used
only with a computer that can recognize a hard disk password of over seven characters. If you then install
the hard disk drive or hybrid drive in a computer that cannot recognize a hard disk password that contains
more than seven characters, you cannot access the drive.
• Record your password and store it in a safe place. If you forget the user hard disk password, or both user
and master hard disk passwords, Lenovo cannot reset your passwords or recover data from the hard disk
drive or hybrid drive. You must take your computer to a Lenovo reseller or a marketing representative
to have the hard disk drive or hybrid drive replaced. Proof of purchase is required, and a fee will be
charged for parts and service.
Notes: The eDrive storage drives or Trusted Computing Group (TCG) Opal-compliant storage drives provide
self-encryption capabilities to secure your data.
• If a TCG Opal-compliant storage drive and a TCG Opal management software program are installed, and
the TCG Opal management software program is activated, the hard disk password is not available.
• If an eDrive storage drive is installed in your computer, and your computer is preinstalled with the
Windows 10 operating system, the hard disk password is not available.
Hard disk security
To protect passwords from unauthorized security attacks, refer to the following tips to maximize security:
• Set a power-on password as well as a hard disk password for your internal solid-state drive, hard disk
drive or hybrid drive. Refer to the procedures in “Power-on password” on page 53 and “Hard disk
passwords” on page 55. For security, a longer password is recommended.
• To provide reliable security for UEFI BIOS, use the security chip and a security application with a Trusted
Platform Module (TPM) management feature. Refer to “Setting the security chip” on page 58.
Chapter 5. Security
57
• If a Disk Encryption hard disk drive, an Encryption solid-state drive, or a Disk Encryption hybrid drive is
installed in your computer, be sure to protect the contents of your computer memory from unauthorized
access by use of drive encryption software, such as Microsoft Windows BitLocker® Drive Encryption.
Refer to “Using Windows BitLocker Drive Encryption” on page 58.
• Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it. For more
information, refer to “Notice on deleting data from your storage drive” on page 62.
Note: The hard disk drive or hybrid drive built into your computer can be protected by UEFI BIOS.
Using Windows BitLocker Drive Encryption
To help protect your computer against unauthorized access, be sure to use drive encryption software, such
as Windows BitLocker Drive Encryption.
Windows BitLocker Drive Encryption is an integral security feature of some editions of the Windows
operating system. It can help you protect the operating system and data stored on your computer, even
if your computer is lost or stolen. BitLocker works by encrypting all user and system files, including the
swap and hibernation files.
BitLocker uses a Trusted Platform Module to provide enhanced protection for your data and to ensure early
boot component integrity. A compatible TPM is defined as a V1.2 TPM.
To check the BitLocker status, go to Control Panel, and click System and Security ➙ BitLocker Drive
Encryption.
For more information about Windows BitLocker Drive Encryption, see the help information system of the
Windows operating system, or search for “Microsoft Windows BitLocker Drive Encryption Step-by-Step
Guide” on the Microsoft Web site.
Disk Encryption hard disk drive, Encryption solid-state drive, and Disk Encryption hybrid drive
Some models contain the Disk Encryption hard disk drive, the Encryption solid-state drive, or the Disk
Encryption hybrid drive. This feature helps to protect your computer against security attacks on media,
NAND flash or device controllers by use of a hardware encryption chip. For the efficient use of the encryption
feature, be sure to set a hard disk password for the internal storage device.
Setting the security chip
Strict security requirements are imposed on network client computers that transfer confidential information
electronically. Depending on the options you ordered, your computer might have an embedded security
chip, a cryptographic microprocessor. With the security chip, you can do the following:
• Protect your data and system
• Strengthen access controls
• Secure communications
Setting the security chip
The choices offered on the Security Chip submenu under the Security menu of ThinkPad Setup are as
follows:
• Security Chip: Activate, inactivate, or disable the security chip.
• Security Reporting Options: Enable or disable each security reporting option.
• Clear Security Chip: Clear the encryption key.
Before you start, print these instructions.
58
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
To set an item on the Security Chip submenu, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Security Chip by using the directional keys.
4. Press Enter. The Security Chip submenu opens.
5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter.
6. Set other items that you want to set.
7. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Tips on using the security chip
• Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the
settings for the security chip.
• If the security chip is removed or replaced, or a new one has been added, the computer will not start. You
will hear four cycles of four beeps each, or you will see error message 0176 or 0192.
• If the security chip is inactive or disabled, the Clear Security Chip option will not be displayed.
• When you clear the security chip, turn off your computer and then turn it on again after you set the
security chip to Active. Otherwise, the Clear Security Chip option is not displayed.
Using the fingerprint reader
Depending on the model, your computer might have a fingerprint reader. Fingerprint authentication can
replace your passwords, such as the Windows password, power-on password, and hard disk password. In
this way, you can log on to your computer simply and securely. To enable fingerprint authentication, enroll
your fingerprints first.
Enrolling your fingerprints
To enroll your fingerprints on the Windows 10 operating system, do the following:
1. Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all
programs, and then click Settings ➙ Accounts ➙ Sign-in options.
2. Follow the instructions on the screen to finish the enrollment.
Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.
Swiping your finger over the fingerprint reader
To swipe your finger over the reader, do the following:
1. Place the top joint of your finger on the sensor.
Chapter 5. Security
59
2. Apply light pressure and swipe your finger toward you across the reader in one smooth motion. Do not
lift your finger when you are swiping it.
Indicator behavior of the fingerprint reader
Indicator behavior
Description
1 Off
The fingerprint reader is not ready for swiping.
2 Solid green
The fingerprint reader is ready for swiping.
3 Amber, blinking
The fingerprint cannot be authenticated.
Associating your fingerprints with your power-on password and hard disk password
To associate your fingerprints with your power-on password and hard disk password, do the following:
1. Turn off and then turn on the computer.
2. When prompted, swipe your finger on the fingerprint reader.
3. Enter your power-on password, hard disk password, or both as required. The connection is created.
When you start the computer again, you can use your fingerprints to log on to the computer with no need to
enter your Windows password, power-on password, and hard disk password.
60
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Attention: If you always use your fingerprint to log on to the computer, you might forget your passwords.
Write down your passwords, and keep them in a safe place. If you forget your power-on password,
you must take your computer to a Lenovo authorized servicer or a marketing representative to have the
password canceled. If you forget your hard disk password, Lenovo cannot reset your password or recover
data from the storage drive. You must take your computer to a Lenovo authorized servicer or a marketing
representative to have the storage drive replaced. Proof of purchase is required, and a fee will be charged
for parts and service.
Setting the fingerprint reader
You can change some advanced settings in the ThinkPad Setup program, see “Using the ThinkPad Setup
program” on page 66.
You can set the following configurations in the ThinkPad Setup program:
• Predesktop Authentication: Enables or disables fingerprint authentication before the operating system
is loaded.
• Reader Priority: Defines the priority for the fingerprint readers if an external fingerprint reader is attached.
• Security Mode: Specifies the settings of the security mode.
• Password Authentication: Enables or disables the password authentication.
Note: This item is displayed only if High security mode is enabled.
• Reset Fingerprint Data: Select this item to erase all of the fingerprint data stored in either the internal
or external fingerprint reader.
Maintaining the fingerprint reader
The following actions could damage the fingerprint reader or cause it not to work properly:
• Scratching the surface of the reader with a hard, pointed object.
• Scraping the surface of the reader with your fingernail or anything hard.
• Using or touching the reader with a dirty finger.
If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free
cloth:
• The surface of the reader is dirty or stained.
• The surface of the reader is wet.
• The reader often fails to enroll or authenticate your fingerprint.
If your finger has any of the following conditions, you might not be able to register or authenticate it:
• Your finger is wrinkled.
• Your finger is rough, dry, or injured.
• Your finger is stained with dirt, mud, or oil.
• The surface of your finger is different from when you enrolled your fingerprint.
• Your finger is wet.
• A finger is used that has not been enrolled.
To improve the situation, try the following:
• Clean or wipe your hands to remove any excess dirt or moisture from the fingers.
• Enroll and use a different finger for authentication.
Chapter 5. Security
61
Notice on deleting data from your storage drive
Some of the data stored on storage drive might be sensitive. Handing your computer over to someone else
without deleting the installed software, such as operating systems and application software, might even
violate license agreements. Be sure to delete data stored on the storage drive before you dispose of, sell,
or hand over your computer.
You can use the following methods to delete data from the storage drive:
• Move the data to the Recycle Bin, and then empty the Recycle Bin.
• Delete the data.
• Format the storage drive, using the software for initializing it.
• Use the recovery program provided by Lenovo to bring the storage drive back to the factory default
settings.
These operations, however, only change the file location of the data; they do not delete the data itself. In
other words, the data retrieval processing is disabled under an operating system such as Windows. The
data is still there, even though it seems to be lost. Thus, it is sometimes possible to read the data by use of
special software for data recovery. There is a risk that people of bad faith might read and misuse the critical
data on the storage drive for unexpected purposes.
To prevent leakage of data, it is important that you delete all the data from the hard disk drive or hybrid drive
when you dispose of, sell, or hand over your computer. You can destroy the data physically by smashing the
hard disk drive or hybrid drive with a hammer, or magnetically by means of strong magnetic power, thus
making the data unreadable. But it is recommended that you use the software (payware) or service (pay
service) developed for that purpose. The process might take several hours.
For disposing of data on the solid-state drive, Lenovo provides the Drive Erase Utility for Resetting the
Cryptographic Key and Erasing the Solid State Drive tool. For disposing of data on the hard disk drive or
hybrid drive, Lenovo provides the Secure Data Disposal™ tool. Go to http://www.lenovo.com/support to
download these tools.
If an Encryption solid-state drive, a Disk Encryption hard disk drive, or a Disk Encryption hybrid drive is
supported and installed in your computer, you can logically dispose of all the data on the drive in a short
time by erasing the cryptographic key. The data encrypted with the old key is not physically erased but
remains on the drive; however, it cannot be decrypted without the old key. This feature is also available with
the Drive Erase Utility for Resetting the Cryptographic Key and Erasing the Solid State Drive tool.
Using firewalls
If your system is preinstalled with a firewall program, it protects against computer Internet security threats,
unauthorized accesses, intrusions, and Internet attacks. It also protects your privacy.
For more information about how to use the firewall program, refer to the help information system that
comes with the program.
Protecting data against viruses
Your computer is preinstalled with an antivirus program so you can detect and eliminate viruses. The
antivirus program is designed to help you detect and eliminate viruses.
Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After
30 days, you must renew the license to continue receiving the antivirus software updates.
62
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
For more information about how to use your antivirus software, refer to the help information system of
your antivirus software.
Chapter 5. Security
63
64
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 6. Advanced configuration
While it is important to protect files, data, and settings that are on the storage drive, you also might need
to install a new operating system, install new device drivers, update your system UEFI BIOS, or recover
preinstalled software. This information will help you handle your computer with proper care and keep it
in top working shape.
•
“Installing the Windows 10 operating system” on page 65
•
“Installing device drivers” on page 66
•
“Using the ThinkPad Setup program” on page 66
•
“Using system management” on page 81
Installing a new operating system
In some situations, you might need to install a new operating system. This topic provides instructions on
how to install a new operating system.
Installing the Windows 10 operating system
In some situations, you might need to install a new operating system. This topic provides instructions
on how to install a Windows 10 operating system.
Before you start, print these instructions.
Attention:
• The process of installing a new operating system deletes all the data on your storage drive, including the
data that were stored in a hidden folder.
• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the M.2
solid-state drive as a bootable device. The M.2 solid-state drive is used for “cache” function.
To install the Windows 10 operating system, do the following:
1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 66.
2. Select Startup ➙ Boot to display the Boot Priority Order submenu.
3. Select the drive that contains the operating system installation program, for example USB HDD.
4. Press the F10 key to exit the ThinkPad Setup program.
5. Connect the drive that contains the operating system installation program to the computer, and restart
the computer.
6. Install the device drivers and necessary programs. See “Installing device drivers” on page 66.
7. After installing the device drivers, apply Windows Update to get the latest modules, for example the
security patches.
8. Depending on your preference, install Lenovo programs. For information about Lenovo programs, see
“Lenovo programs” on page 12
Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the
ThinkPad Setup program. Otherwise, the operating system will not start correctly.
When you install the Windows 10 operating system, you might need one of the following country or region
codes:
© Copyright Lenovo 2015
65
Country or region
Code
Country or region
Code
China
SC
Netherlands
NL
Denmark
DK
Norway
NO
Finland
FI
Spain
SP
France
FR
Sweden
SV
Germany
GR
Taiwan and Hong Kong
TC
Italy
IT
United States
US
Japan
JP
Installing device drivers
Device driver is the program that operates a particular hardware device of the computer. If a device does not
perform well or you install a new device, you need to install or update the corresponding device driver.
To download the latest device drivers, do the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select your product name to view all the device drivers for your computer.
3. Select the device drivers that you need, and follow the instructions on the screen.
Attention: Do not download the device drivers from the Windows Update Web. Always download the device
drivers from:
http://www.lenovo.com/ThinkPadDrivers
Using the ThinkPad Setup program
The ThinkPad Setup program enables you to select various setup configurations for your computer through
configuring the BIOS.
To configure the BIOS of your computer, do the following:
1. Restart the computer. When the logo is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to “Using passwords” on page 53.
2. Use the pointer keys to select a tab; or use the pointer keys to locate an item and press Enter to select
it. Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.
4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.
66
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Main menu
When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI BIOS Version
• UEFI BIOS Date
• Embedded Controller Version
• ME Firmware Version
• Machine Type Model
• System-unit serial number
• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• MAC Address (Internal LAN)
• Preinstalled OS License
• UEFI Secure Boot
• OA3 ID
• OA2
Config menu
To change the configuration of your computer, select Config tab from the ThinkPad Setup menu.
The following table lists the Config menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 3. Config menu items
Menu item
Submenu item
Selection
Comments
Network
Wake On LAN
• Disabled
Enable the computer to power
on when the Ethernet controller
receives a magic packet (a
special network message).
• AC Only
• AC and Battery
If you select AC Only, Wake on
LAN is enabled only when the ac
power adapter is attached.
If you select AC and Battery,
Wake on LAN is enabled with
any power sources.
Notes:
• The magic packet type Wake
on LAN requires ac power.
Chapter 6. Advanced configuration
67
Table 3. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
• The Wake on LAN function
does not work when a hard
disk password is set.
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI PXE Boot Priority
(for Both with UEFI first
boot mode, and IPv6
and IPv4 stacks are both
enabled.)
USB
USB UEFI BIOS Support
• Disabled
• Enabled
• Disabled
• Enabled
• IPv6 First
• IPv4 First
• Disabled
• Enabled
Always On USB
• Disabled
• Enabled
Enable or disable Internet
Protocol Version 4 (IPv4) network
stack for the UEFI environment.
Enable or disable Internet
Protocol Version 6 (IPv6) network
stack for UEFI environment.
Select network stack priority for
UEFI PXE boot.
Enable or disable boot support
from USB storage devices.
Enable or disable the function
of charging external devices
in low-power states (standby,
hibernation or shutdown). If the
system runs in battery mode, this
function will work only in standby
state.
If you select Enabled, your
computer can charge external
devices in low-power states.
If you select Disabled, your
computer cannot charge external
devices in low-power states.
Always On USB Charge in
Battery Mode
• Disabled
• Enabled
Note: This item is available only
when the Always On USB is set
as Enabled.
Enable or disable the function of
charging external devices when
your computer is in hibernation
mode or is turned off without
connecting to ac power.
If you select Enabled, your
computer can charge external
devices when your computer is in
hibernation mode or is turned off
without connecting to ac power.
If you select Disabled, your
computer cannot charge external
devices when your computer is in
68
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Table 3. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
hibernation mode or is turned off
without connecting to ac power.
Keyboard/Mouse
Fn and Ctrl Key swap
• Disabled
• Enabled
Enable exchanges of Fn and Ctrl
key action at the bottom-left of
the keyboard.
Disabled: Fn key and Ctrl key
behavior is as printed on the
keyboard.
Enabled: Fn key works as Ctrl
key. Ctrl key works as Fn key.
F1–F12 as primary function
• Disabled
• Enabled
Enable the F1-F12 function or
the special function printed as an
icon on each key as the primary
function.
Enabled: Executes the F1-F12
function.
Disabled: Executes the special
function.
To temporarily switch the above
two options, press Fn+Esc to
enable FnLock. The FnLock
indicator is on when FnLock is
enabled.
Fn Sticky key
• Disabled
• Enabled
Display
Boot Display Device
• ThinkPad LCD
• DisplayPort
• HDMI
• Display on dock
When the option is enabled, you
can press the Fn key to keep it in
a pressed condition; then press
the desired function key. The
action is equivalent to pressing
the required key simultaneously
with the Fn key. When you press
the Fn key twice, the state is
locked until you press the Fn key
again.
Select a video device for boot.
DisplayPort: Mini
DisplayPort(TM) connector
on ThinkPad.
HDMI: HDMI connector on
ThinkPad.
Display on dock: Display
connectors on dock.
Boot screen is cloned to all
displays on dock.
Shared Display Priority
• HDMI or WiGig
Select the priority between
shared display outputs. HDMI,
WiGig and Dock displays share a
Chapter 6. Advanced configuration
69
Table 3. Config menu items (continued)
Menu item
Submenu item
Total Graphics Memory
Selection
Comments
• Display on dock
single display output. This option
chooses which one is prioritized.
• 256 MB
Allocate the total memory which
Intel internal graphics shares.
• 512 MB
Note: If you select 512 MB, the
maximum usable memory might
be reduced on 32–bit operating
system.
Boot Time Extension
• Disabled
• 1 second
• 2 seconds
• 3 seconds
• 5 seconds
• 10 seconds
Power
Intel(R) SpeedStep®
technology
• Disabled
• Enabled
This option defines the amount of
time to extend the boot process,
in seconds.
The system cannot detect
some external monitors during
boot because they need a few
seconds to be ready. Try this
option if the monitor being used
does not display the boot screen.
Enable or disable the Intel
SpeedStep technology.
If you select Enabled, the
processor can work at lower
speed to save power.
If you select Disabled, the
processor always works at the
highest speed.
Adaptive Thermal
Management
Scheme for AC
• Maximize
Performance
• Balanced
If you select Maximize
Performance, it reduces CPU
throttling. If you select Balanced,
it balances the fan sound, the
computer temperature, and the
computer performance.
Scheme for Battery
• Maximize
Performance
• Balanced
CPU Power Management
• Enabled
• Disabled
Power On with AC Attach
• Enabled
• Disabled
70
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Enable or disable the
power-saving feature that
stops the microprocessor clock
automatically when there are no
computer activities. Normally, it
is not necessary to change the
setting.
If enabled, the system is powered
on when AC is attached. When
the system is in hibernate state,
the system resumes. If disabled,
the system is not powered On nor
resumed when AC is attached.
Table 3. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
Disable Built-in Battery
Use this feature to temporarily
disable the built-in battery. The
system will be automatically
powered off after you select this
item. Then the computer is ready
to be serviced.
Note: The ac power adapter
must be disconnected to perform
this operation. The built-in
battery will be automatically
enabled when the ac power
adapter is reconnected.
Beep and Alarm
Password Beep
• Disabled
Enable this option to have a
beep sound when the system
is waiting for a power-on, hard
disk, or supervisor password.
Different beeps will be sounded
when the entered password
matches or does not match the
configured password.
• Enabled
Keyboard Beep
• Disabled
Enable or disable the keyboard
beep when unmanageable key
combinations are pressed.
• Enabled
Intel AMT
Intel AMT Control
• Disabled
• Enabled
• Permanently Disabled
This option enables or disables
Intel (R) Active Management
Technology (AMT) function.
If you select Enabled, Intel Active
Management Technology (AMT)
is configured and additional
setup items are provided in
Management Engine BIOS
Extension (MEBx) Setup.
If you select Permanently
Disabled, you will never be able
to enable it again. Be cautious
when you want to use this option.
Note: You can enter the MEBx
Setup menu by pressing the
Ctrl+P key combination in the
Startup Interrupt Menu window.
To display the Startup Interrupt
Menu window, press the black
button or Enter key during the
power-on self-test (POST).
CIRA Timeout
0-255
Note: The default value
is 60 seconds.
Set the timeout option for CIRA
connection to be established.
Selectable second values are
from 1 to 254.
If you select 0, use 60 seconds
as the default timeout value.
Chapter 6. Advanced configuration
71
Table 3. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
If you select 255, the waiting time
for establishing a connection is
unlimited.
Console Type
• PC ANSI
Select the console type for AMT.
• VT100+
Note: This console type should
match the Intel AMT remote
console.
• PC-ANSI
• VT-UTF8
Date and Time menu
To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the pointer keys to select System Date or System Time.
2. Type a date or time.
Security menu
To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 4. Security menu items
Menu item
Submenu item
Selection
Comments
Password
Supervisor Password
• Disabled
Refer to “Supervisor password” on
page 54.
• Enabled
Lock UEFI BIOS Settings
• Disabled
• Enabled
Password at Unattended
Boot
72
• Disabled
• Enabled
Enable or disable the function that
protects items in the ThinkPad
Setup program from being changed
by unauthorized users. By default,
this is set to Disabled. If you set
the supervisor password and enable
this function, no one but you can
change the items in the ThinkPad
Setup program.
If you select and enable Password
at unattended boot, a password
prompt will be displayed when
the computer is turned on, from
either a power-off or hibernation
state. If you select Disabled, no
password prompt will be displayed;
the computer goes ahead and loads
the operating system. To prevent
unauthorized access, you can set
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
the user authentication on the
operating system.
Password at Restart
• Disabled
• Enabled
Password at Boot Device
List
• Disabled
• Enabled
If you select and enable Password
at restart, a password prompt will
be displayed when you restart the
computer. If you select Disabled, no
password prompt will be displayed;
the computer goes ahead and loads
the operating system. To prevent
unauthorized access, you can set
the user authentication on the
operating system.
If the Security password is set, this
option is used to specify whether the
Security password must be entered
to display the F12 boot device list.
Select Enabled to prompt for the
Security password. Select Disabled
to proceed without any user action
required.
Password Count
Exceeded Error
• Disabled
Set Minimum Length
• Disabled
• Enabled
• x characters
(4≤x≤12)
Power-On Password
• Disabled
• Enabled
Hard Disk1 Password
• Disabled
• Enabled
Fingerprint
Select Enabled to show the POST
0199 error and prompt for the
Security password. Select Disabled
to hide the POST 0199 error and
proceed without any user action
needed.
Specify a minimum length for
power-on password and hard disk
passwords. If you set the supervisor
password and specify a minimum
length for passwords, no one but
you can change the length.
Refer to “Power-on password” on
page 53.
Refer to “Hard disk passwords” on
page 55.
Predesktop
Authentication
• Disabled
Reader Priority
• External->Internal If you select External, an external
fingerprint reader is used. If an
• Internal Only
external reader is not present, an
internal reader is used.
• Enabled
If you select Enabled, authentication
by a fingerprint is enabled at
predesktop. If you select Disabled,
authentication by a fingerprint is
disabled at predesktop.
If you select Internal, an internal
fingerprint reader is used. If an
internal reader is not present, an
external reader is used.
Chapter 6. Advanced configuration
73
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
Security Mode
• Normal
If you select Normal, the Power-On
Password or Supervisor Password
must be entered to boot a system
when no fingerprint is authenticated.
If you select High, the Supervisor
password must be entered to boot
a system when no fingerprint is
authenticated. Power-On Password
is not accepted.
• High
Password Authentication
• Disabled
• Enabled
Reset Fingerprint Data
Security Chip
Security Chip Selection
Note: This item is available only
when the Security Mode is set as
High.
If you select Enabled, authentication
by password is enabled. Users are
authenticated by passwords when
fingerprints are not available. If you
select Disabled, authentication by
password is disabled. Users are not
authenticated by passwords. Note
that administrators are authenticated
by a Supervisor Password.
This option is used to erase all
fingerprint data stored in the
fingerprint reader and reset settings
to the factory state (ex. Power-on
security, LEDs, etc.) As a result,
any power-on security features
previously enabled will not be able
to work until they are re-enabled in
the fingerprint software.
• Discrete TPM
• Intel PTT
Choose Discrete TPM to use a
discrete TPM chip with TPM 1.2
mode.
Choose Intel PTT to use Intel(R)
Platform Trusted Technology with
TPM 2.0 mode.
Note: Intel(R) PTT can be used with
Mircorosft ® Windows 8 (R) or later
operating system.
Security Chip
• Active
• Inactive
74
(If Security Chip
Selection is Discrete
TPM)
• Disabled
Security Chip
• Enabled
Note: This item is available only
when the Security Chip is set as
Discrete TPM.
If you select Active, the security
chip will be functional. If you select
Inactive, the Security Chip option
will be visible, but the security chip
will not be functional. If you select
Disabled, the Security Chip option
will be hidden and the security chip
will not be functional.
Note: This item is available only
when the Security Chip is set as
Intel PTT.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Table 4. Security menu items (continued)
Menu item
Submenu item
(If Security Chip
Selection is Intel PTT)
Selection
• Disabled
Comments
If you select Enabled, the security
chip will be functional. If you select
Disabled, the Security Chip option
will be hidden and the security chip
will not be functional.
Enable or disable the following
security reporting options:
Security Reporting
Options
• BIOS ROM Strings Reporting:
BIOS text string
• SMBIOS Reporting: SMBIOS
string
• CMOS Reporting
• NVRAM Reporting
Note: This item is available when
Security Chip is set as Active.
Clear Security Chip
Enter
This option is used to clear
encryption keys. It will
not be possible to access
already-encrypted data after
these keys are cleared.
Note: This item is available when
Security Chip is set as Active.
Intel(R) TXT Feature
• Disabled
• Enabled
Enable or disable the Intel Trusted
Execution Technology (TXT) feature.
Intel TXT is a hardware-based
security technology that establishes
a root of trust to protect information
from software-based attacks.
Note: The Intel (R) TXT Feature
item is only available on models that
support the Intel vPro™ technology.
Intel(R) TXT Feature
• Disabled
Unselectable for Intel PPT.
• Disabled
This option enables or disables
confirmation of a user physical
presence when provisioning the
security chip.
(Unselectable when Intel
PTT is enabled.)
Physical Presence for
Provisioning
• Enabled
If you select Enabled, a user
confirmation screen will be
displayed when provisioning the
security chip.
Chapter 6. Advanced configuration
75
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
If you select Disabled, no user
confirmation screen will be
displayed when provisioning the
security chip.
Physical Presence for
Clear
• Disabled
• Enabled
This option enables or disables
confirmation of a user physical
presence when clearing the security
chip.
If you select Enabled, a user
confirmation screen will be
displayed when clearing the security
chip.
If you select Disabled, no user
confirmation screen will be
displayed when clearing the security
chip.
UEFI BIOS Update Option
Flash BIOS Updating by
End-Users
• Disabled
Secure RollBack
Prevention
• Disabled
• Enabled
• Enabled
If you select Enabled, all users can
update the UEFI BIOS. If you select
Disabled, only the person who
knows the supervisor password can
update the UEFI BIOS.
If you select Disabled, you can flash
to an earlier version of the UEFI
BIOS.
If you select Enabled, you cannot
flash to an earlier version of the UEFI
BIOS.
Note: This item is set as Disabled
by default when the OS Optimized
Defaults on the Restart menu is
set as Disabled. This item is set
as Enabled by default when the
OS Optimized Defaults is set as
Enabled.
Memory Protection
Execution Prevention
• Disabled
• Enabled
76
Some computer viruses and worms
cause memory buffers to overflow.
By selecting Enabled you can
protect your computer against
attacks by such viruses and worms.
If you find that an application
program does not run correctly after
choosing Enabled, select Disabled
and reset the setting.
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
Virtualization
Intel(R) Virtualization
Technology
• Disabled
If you select Enabled, a Virtual
Machine Monitor (VMM) can utilize
the additional hardware capabilities
provided by Intel Virtualization
Technology.
Intel(R) VT-d Feature
• Disabled
• Enabled
• Enabled
Intel VT-d stands for Intel
Virtualization Technology for
directed I/O. When enabled, a VMM
can utilize the platform infrastructure
for I/O virtualization.
Note: This item is available when
the processor of your computer
supports this feature.
I/O Port Access
Ethernet LAN
• Disabled
• Enabled
Select whether to enable or disable
Ethernet LAN Device.
If you select Enabled, you can use
the Ethernet LAN Device.
If you select Disabled, you can use
the Ethernet LAN Device and keeps
it disabled in the OS environment.
Wireless LAN
• Disabled
• Enabled
Wireless WAN
• Disabled
• Enabled
Bluetooth
• Disabled
• Enabled
USB Port
• Disabled
• Enabled
Memory Card Slot
• Disabled
• Enabled
Integrated Camera
• Disabled
• Enabled
Microphone
• Disabled
• Enabled
Fingerprint Reader
• Disabled
• Enabled
If you select Enabled, you can use
the Wireless LAN device.
If you select Enabled, you can use
the Wireless WAN device.
If you select Enabled, you can use
the Bluetooth device.
If you select Enabled, you can use
the USB connectors.
If you select Enabled, you can use
the memory card slot for an SD card
or a MultiMediaCard.
If you select Enabled, you can use
the camera.
If you select Enabled, you can use
the microphone (internal, external,
or line-in).
If you select Enabled, you can use
the Fingerprint Reader.
Chapter 6. Advanced configuration
77
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
Anti-Theft
Computrace
• Enabled
Enable or disable the UEFI BIOS
interface to activate the computrace
feature. The computrace feature
enables you to track and secure
your computer.
• Disabled
• Permanently
Disabled
Note: If you set the Computrace
item as Permanently Disabled, it
cannot be enabled again.
Secure Boot
Secure Boot
• Disabled
• Enabled
Enable or disable the Secure Boot
feature.
If you enable the Secure Boot,
the following item settings on the
Startup menu also will change
automatically:
1. The UEFI/Legacy Boot setting
will change to UEFI Only.
2. The CSM Support setting will
change to No.
Select Enable to prevent
unauthorized operating systems
from running at boot time.
Select Disabled to allow any
operating systems to run at boot
time.
Note: This item is set as Disabled
by default when the OS Optimized
Defaults on the Restart menu is
set as Disabled. This item is set
as Enabled by default when the
OS Optimized Defaults is set as
Enabled.
Platform Mode
• User Mode
Specify the system operating mode.
• Setup Mode
Secure Boot Mode
• Standard Mode
Specify the Secure Boot mode.
• Custom Mode
Reset to Setup Mode
• Yes
• No
Restore Factory Keys
78
This option is used to clear the
current platform key and put the
system into setup mode. You can
install your own platform key and
customize the Secure Boot signature
databases in setup mode. Secure
Boot mode will be set to custom
mode.
This option is used to restore all
keys and certificates in Secure Boot
databases to factory defaults. Any
customized Secure Boot settings will
be erased, and the default platform
key will be re-established along with
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Table 4. Security menu items (continued)
Menu item
Submenu item
Selection
Comments
the original signature databases
including certificate for Windows 10
operating system.
Clear All Secure Boot
Keys
This option is used to clear all keys
and certificates in Secure Boot
databases. You can install your own
keys and certificates after selecting
this option.
Startup menu
To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu.
Attention:
• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a
format operation. Otherwise your data might be erased or overwritten.
• If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive
encryption locks the computer from starting once detects the change of startup sequence.
To change the startup sequence temporarily so that the computer starts from a desired drive, do the following:
1. Restart the computer. When the ThinkPad logo is displayed, press F12.
2. Select the device that you want the computer to start from.
Note: The Boot menu will be displayed if the computer cannot start from any devices, or the operating
system cannot be found.
The following table lists the Startup menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Startup menu items
Menu item
Selection
Select the boot device when you
press the power button to turn on the
computer.
Boot
Network Boot
Comments
• USB CD
• USB FDD
Select top priority of the Boot Priority
Order when waking from LAN.
• ATA HDD0
• USB HDD
• PCI LAN
Chapter 6. Advanced configuration
79
Table 5. Startup menu items (continued)
Menu item
Selection
Comments
UEFI/Legacy Boot
• Both
Select system boot capability.
• UEFI Only
• Both: The system boots by the
following UEFI/Legacy Boot Priority
setting.
• Legacy Only
UEFI/Legacy Boot Priority
• Legacy First
• UEFI First
CSM Support
• No
• Yes
• UEFI Only: The system boots from
the UEFI enabled operating system.
• Legacy Only: The system boots from
any operating system other than the
UEFI enabled one.
Note: If you select UEFI Only, the
system cannot boot from the bootable
devices that do not have the UEFI
enabled operating system.
Compatibility Support Module (CSM) is
required for booting the legacy operating
system. If you select UEFI Only, CSM
Support will be selectable. For Both or
Legacy Only mode, CSM Support will
not be selectable.
Note: The Both and the CSM Support
selections are available when theOS
Optimized Defaults on the Restart
menu is set as Disabled, the UEFI
Only selection is available when theOS
Optimized Defaults on the Restart
menu is set as Enabled.
Boot Mode
• Quick
• Diagnostics
Quick: The diagnostic splash screen will
not be displayed unless you press Esc
during starting the system.
Diagnostics: The diagnostic splash
screen is always displayed during
starting the system.
Option Key Display
• Enabled
• Disabled
Boot Device List F12 Option
• Enabled
• Disabled
Choose whether to show the option key
message when the system is started.
If you select Enabled, a pop-up boot
device List will be displayed when you
press F12 key.
Note: Only the person who knows the
supervisor password can change the
setting of this option.
Boot Order Lock
• Disabled
• Enabled
If you select Disabled, your computer
will boot using the default priority. If you
select Enabled, your computer will boot
using the priority you have customized.
Restart menu
To exit the ThinkPad Setup program and restart the computer, select Restart from the ThinkPad Setup menu.
80
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
The following submenu items are displayed:
• Exit Saving Changes: Save the changes and restart the computer.
• Exit Discarding Changes: Discard the changes and restart the computer.
Notes: The changes of the following submenu items will not be discarded and can be reset in ThinkPad
Setup menu:
– Date & Time
– Supervisor password
– Power-on password
– Hard disk password
• Load Setup Defaults: Restore to the factory default settings.
Notes: The changes of the following submenu items will not be discarded and can be reset in ThinkPad
Setup menu:
– Date & Time
Note: Enable OS Optimized Defaults to meet the Windows 10 certification requirements. When you
change this setting, some other settings are changed automatically, such as CSM Support, UEFI/Legacy
Boot, Secure Boot, and Secure RollBack Prevention. Ensure that you do not enable the OS Optimized
Defaults if your computer is only installed with the Windows 7 operating system.
• Discard Changes: Discard the changes.
Notes: The changes of the following submenu items will not be discarded and can be reset in ThinkPad
Setup menu:
– Date & Time
– Supervisor password
– Power-on password
– Hard disk password
• Save Changes: Save the changes.
Updating the UEFI BIOS
The UEFI BIOS is the first program that the computer runs when the computer is turned on. The UEFI BIOS
initializes the hardware components, and loads the operating system and other programs.
You can update the UEFI BIOS by starting your computer from a flash update optical disc or a flash update
program running in the Windows environment. When you install a new program, a device driver, or hardware,
you might be informed to update the UEFI BIOS.
For instructions on how to update the UEFI BIOS, go to:
http://www.lenovo.com/ThinkPadDrivers
Using system management
This topic is primarily intended for the network administrators.
Your computer is designed for manageability, so that you can redirect more resources to better meet
your business objectives.
Chapter 6. Advanced configuration
81
This manageability, known as Total Cost of Ownership (TCO), enables you to remotely operate client
computers in the same way as you operate your own computer, such as turning on a client computer,
formatting a hard disk drive or hybrid drive, and installing a program.
Once the computer is configured and operational, you can manage it by using the software and the
manageability features that are already integrated into the client computer and the network.
Desktop Management Interface
The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS)
Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of
your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices on
the system board. This specification documents the standards for getting access to this BIOS information.
Preboot eXecution Environment
The Preboot eXecution Environment (PXE) technology makes the computer more manageable by enabling the
computer to start from a server. Your computer supports the personal computer functions that PXE requires.
Note: The Remote Initial Program Load (RIPL or RPL) function cannot be used with your computer.
Asset ID EEPROM
The Asset ID EEPROM contains information about the computer configuration and the serial numbers of
the key components. It also includes a number of blank fields where you can record information about
the end users in your network.
82
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 7. Preventing problems
An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can
avoid common problems. The chapter provides information that can help you keep your computer running
smoothly.
•
“General tips for preventing problems” on page 83
•
“Making sure device drivers are current” on page 84
•
“Taking care of your computer” on page 85
General tips for preventing problems
This topic provides the following tips to help you prevent computing problems:
• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, you are not
recommended to use the M.2 solid-state drive as a bootable device. The M.2 solid-state drive is designed
and developed for “cache” function purpose only. If you use the M.2 solid-state drive as a bootable
device, its reliability is not guaranteed.
• Check the capacity of your hard disk drive or hybrid drive from time to time. If the hard disk drive or hybrid
drive gets too full, the Windows operating system will slow down and might produce errors.
To check the hard disk drive or hybrid drive capacity, open the File Explorer and click This PC.
• Empty your recycle bin on a regular basis.
• Use disk defragment tool regularly on your hard disk drive or hybrid drive to improve data seek and
read times.
• To free up disk space, uninstall unused application programs.
Note: You also might want to look for program duplication or overlapping versions.
• Clean out your Inbox, Sent, and Trash folders from your e-mail client program.
• Back up your data at least once a week. If critical data is present, it is a good idea to perform a daily
backup operation. Lenovo has many backup options available for your computer. Rewritable optical
drives are available for most machines and are easily installed.
• Schedule system restore operations to take a system snapshot periodically. For more information about
system restore, see Chapter 9 “Recovery overview” on page 105.
• Update device drivers and the UEFI BIOS when needed.
• Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers and
revisions.
• Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the device
driver information release notes prior to updating for compatibility or known issues.
• Keep a log book. Entries might include major hardware or software changes, driver updates, minor issues
you have experienced, and how you resolved the minor issues.
• If you ever need to run a recovery on your computer to return the preinstalled contents onto the machine,
the following tips might help along the way:
– Remove all external devices such as the printer, keyboard, and so on.
– Make sure that your battery is charged and your computer has the ac power connected.
– Access ThinkPad Setup and load the default settings.
– Restart the computer and start the recovery operation.
© Copyright Lenovo 2015
83
– If your computer uses discs as the recovery media, do not remove the disc from the drive until
prompted to do so.
• For suspected hard disk drive or hybrid drive issues, refer to “Diagnosing problems” on page 89 and run a
diagnostic test for the drive before you call the Customer Support Center. If your computer does not
start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest.
Run the test and record any messages or error codes. If the test returns any failing error codes or
messages, call the Customer Support Center with the codes or messages and the computer in front of
you. A technician will assist you further.
• If required, you can find the contact information about the Customer Support Center for your country
or region at http://www.lenovo.com/support/phone. When calling the Customer Support Center, make
sure that you have your machine model type, serial number, and the computer in front of you. Also, if the
computer is producing error codes, it is helpful to have the error screen on or the messages written down.
Making sure device drivers are current
Device drivers are programs that contain instructions for the operating system about how to operate or
“drive” a certain piece of hardware. Each hardware component on your computer has its own specific driver.
If you add a new component, the operating system needs to be instructed on how to operate that piece
of hardware. After you install the driver, the operating system can recognize the hardware component
and understand how to use it.
Note: Because drivers are programs, like any other file on your computer, they are susceptible to corruption
and might not perform correctly if corruption occurs.
It is not always necessary to download the latest drivers. However, you should download the latest driver
for a component if you notice poor performance from that component or if you added a new component.
This might eliminate the driver as the potential cause of a problem.
Getting the latest drivers from the Web site
You can download and install updated device drivers from the Lenovo Web site by doing the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select the entry for your computer and then follow the instructions on the screen to download and
install necessary software.
Getting the latest drivers using System Update
The System Update program helps you keep the software on your computer up-to-date. Update packages
are stored on Lenovo servers and can be downloaded from the Lenovo Support Web site. Update packages
can contain applications, device drivers, UEFI BIOS flashes, or software updates. When the System Update
program connects to the Lenovo Support Web site, the System Update program automatically recognizes
the machine type and model of your computer, the installed operating system, and the language of the
operating system to determine what updates are available for your computer. The System Update program
then displays a list of update packages and categorizes each update as critical, recommended, or optional to
help you understand the importance. You have complete control of which updates to download and install.
After you select the update packages you want, the System Update program automatically downloads and
installs the updates without any further intervention from you.
The System Update program is preinstalled on your computer and is ready to run. The only prerequisite is
an active Internet connection. You can start the program manually, or you can use the schedule feature
to enable the program to search for updates automatically at specified intervals. You also can predefine
scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates)
so the list you choose from contains only those update types that are of interest to you.
84
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
For more information about how to use the System Update program, refer to the help information system
of the program.
Taking care of your computer
Although your computer is designed to function reliably in normal work environments, you need to use
common sense in handling it. By following the important tips in this topic, you will get the most use and
enjoyment out of your computer.
Be careful about where and how you work
• Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic
bags.
• Keep your computer away from magnets, activated cellular phones, electrical appliances, or speakers
(more than 13 cm or 5 inches).
• Avoid subjecting your computer to extreme temperatures (below 5°C/41°F or above 35°C/95°F).
• Some appliances, such as certain portable desktop fans or air purifiers, can produce negative ions. If a
computer is close to such an appliance, and is exposed for an extended time to air containing negative
ions, it might become electrostatically charged. Such a charge might be discharged through your hands
when you touch the keyboard or other parts of the computer, or through connectors on I/O devices
connected to the computer. Even though this kind of electrostatic discharge (ESD) is the opposite of a
discharge from your body or clothing to the computer, it poses the same risk of a computer malfunction.
Your computer is designed and manufactured to minimize any effects of electrostatic charge. An electrostatic
charge above a certain limit, however, can increase the risk of ESD. Therefore, when using the computer
close to an appliance that can produce negative ions, give special attention to the following:
• Avoid directly exposing your computer to the air from an appliance that can produce negative ions.
• Keep your computer and peripherals as far as possible from such an appliance.
• Wherever possible, ground your computer to facilitate safe electrostatic discharge.
Note: Not all such appliances cause a significant electrostatic charge.
Be gentle with your computer
• Avoid placing any objects (including paper) between the display and the keyboard or the palm rest.
• Do not turn your computer over while the ac power adapter is plugged in. This could break the adapter
plug.
Carry your computer properly
• Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect
cords and cables.
• When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by
the display.
Handle storage media and drives properly
• When installing the storage drive, follow the instructions shipped with your hardware, and apply pressure
only where needed on the device.
• Turn off your computer before you replace the storage drive.
• After you replace the primary storage drive, reattach the cover of the drive slot.
• Store your external and removable hard disk drives or optical drives in appropriate containers or
packaging when they are not being used.
Chapter 7. Preventing problems
85
• Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard,
touch a metal table or a grounded metal object. This action reduces any static electricity from your
body. Static electricity could damage the device.
• When transferring data to or from a flash media card, such as an SD card, do not put your computer in
sleep or hibernation mode before the data transfer is complete; otherwise, your data could become
damaged.
Taking care in setting passwords
• Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and
you might have to replace the system board or the storage drive.
Registering your computer
• Register your ThinkPad computer with Lenovo at http://www.lenovo.com/register. For more information,
see “Registering your computer” on page 15.
Be sure not to modify your computer
• Only an authorized ThinkPad repair technician should disassemble and repair your computer.
• Do not modify or tape the latches to keep the display open or closed.
Cleaning the cover of your computer
Occasionally clean your computer by doing the following:
1. Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or
strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5. Wipe the surface to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
8. Wipe the surface again with a dry, soft, lint-free cloth.
9. Wait for the surface to dry completely and remove any fibers from the cloth.
Cleaning your computer keyboard
To clean the computer keyboard, do the following:
1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth.
Note: Avoid spraying cleaner directly onto the display or the keyboard.
2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time,
the cloth might hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto
or between the keys.
3. Allow to dry.
4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush
or cool air from a hair dryer.
Cleaning your computer display
To clean the computer display, do the following:
86
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it
might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was
pressed from the outside.
2. Wipe or dust the stain gently with a soft, dry cloth.
3. If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol and
water that does not contain impurities.
Note: Avoid spraying cleaner directly onto the display or the keyboard.
4. Wring out as much of the liquid as you can.
5. Wipe the display again; do not let any liquid drip into the computer.
6. Be sure to dry the display before closing it.
Chapter 7. Preventing problems
87
88
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 8. Troubleshooting computer problems
This chapter provides information on what to do if you experience a problem with your computer.
This chapter contains the following topics:
•
“Diagnosing problems” on page 89
•
“Troubleshooting” on page 89
Diagnosing problems
If you experience problems with your computer, use the Lenovo Solution Center program as a starting
point for solving them.
The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for maximum system performance.
Notes:
• The Lenovo Solution Center program also is available for downloaded at:
http://www.lenovo.com/diags
• If you are using other Windows operating system rather than Windows 10, you can find the latest
information about diagnostics for your computer at:
http://www.lenovo.com/diags
To run the Lenovo Solution Center program, see “Lenovo programs” on page 12.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the Lenovo Solution Center
program, save and print the log files created by the program. You will need the log files when you speak to a
Lenovo technical support representative.
Troubleshooting
If your computer has an error, it typically displays a message or an error code, or a beep sounds when
you turn it on. When you experience a problem, refer to the corresponding sections in this topic to try to
solve the problem by yourself.
Computer stops responding
Print these instructions now and keep the instructions with your computer for reference later.
If your computer is completely unresponsive (you cannot use the TrackPoint pointing device or the
keyboard), do the following:
1. Press and hold the power button for four seconds or more to turn off the computer, and then restart the
computer by pressing the power button.
Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2.
© Copyright Lenovo 2015
89
2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened
paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 5.
Reattach the ac power adapter.
Notes:
a. If the computer does not turn on, continue with step 3.
b. If the computer starts with ac power but does not start when ac power is disconnected, call the
Customer Support Center for support. Go to http://www.lenovo.com/support/phone for the latest
list of support phone numbers for your country or region.
3. Remove all external devices that are attached to your computer (keyboard, mouse, printer, scanner,
and so on). Repeat step 2.
If the computer still does not start up, call the Customer Support Center and a Customer Support Specialist
will assist you.
Spills on the keyboard
With a mobile computer, there are increased chances of spilling liquids on the keyboard. Because most
liquids conduct electricity, liquid spilled on the keyboard could create numerous short circuits, potentially
causing irreparable damage to your computer.
If you spill something on your computer:
Attention: Ensure that no liquid creates a short circuit between you and the ac power adapter (if in use).
Although you might lose some data or work by turning off the computer immediately, leaving the computer
on might make your computer unusable.
1. Carefully unplug the ac power adapter immediately.
2. Turn off the computer immediately. The more quickly you stop the current from passing through the
computer the more likely you will reduce damage from short circuits.
3. Wait until you are certain that all the liquid is dry before turning on your computer.
Note: If you want to replace your keyboard, you can purchase a new one.
Error messages
• Message: 0177: Bad SVP data, stop POST task.
Solution: Checksum of the supervisor password in the EEPROM is not correct.
• Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup.
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup
to check the Security settings, Press F10 and then press Enter to restart the system. If you still have a
problem, have the computer serviced.
• Message: 0187: EAIA data access error.
Solution: Enter ThinkPad Setup to check the Security settings. Press F10 and then press Enter to
restart the system.
• Message: 0188: Invalid RFID Serialization Information Area.
Solution: The EEPROM checksum is not correct (block # 0 and 1). Reset the block # 0 and 1, for example
the box Serial Number, and/or block # 4 and 5, for example the UUID.
• Message: 0189: Invalid RFID configuration information area.
90
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Solution: The EEPROM checksum is not correct (block # 4 and 5). Reset the block # 0 and 1, for example
the box Serial Number, and/or block # 4 and 5, for example the UUID.
• Message: 0190: Critical low-battery error.
Solution: The computer turns off, because the battery is low. Connect the ac power adapter to the
computer and charge the battery.
• Message: 0191: System Security - Invalid remote change requested.
Solution: Bad system configuration change request has been detected, for example, the BootBlock
update has failed or unknown request packet has been detected. To clear the error, enter the ThinkPad
Setup program.
• Message: 0199: System Security - Security password retry count exceeded.
Solution: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Setup program.
• Message: 1802: Unauthorized network card is plugged in - Power off and remove the network card.
Solution: The wireless network card is not supported on this computer. Remove it.
• Message: 0251: System CMOS checksum bad.
Solution: The system CMOS might have been corrupted by an application program. The computer uses
the default settings. Run ThinkPad Setup to reconfigure the settings. If you still see the same error code,
have the computer serviced.
• Message: 0271: Real Time Clock Error - Check Date and Time settings.
Solution: Neither the date nor the time is set in the computer. Enter ThinkPad Setup to set the date and
time.
• Message: 2000: ThinkVantage Active Protection sensor diagnostics failed.
Solution: ThinkVantage® Active Protection sensor is not working correctly. Have the computer serviced.
• Message: 2100: Detection error on HDD0 (Main HDD).
Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive
serviced.
• Message: 2102: Detection error on HDD2 (M.2 SATA)
Solution: The M.2 SATA device is not working. Have the M.2 SATA device serviced.
• Message: 2110: Read error on HDD0 (Main HDD)
Solution: The main hard disk drive or hybrid drive is not working. Have the main hard disk drive or
hybrid drive serviced.
• Message: 2112: Read error on HDD2 (M.2 SATA)
Solution: The M.2 SATA device is not working. Have the M.2 SATA device serviced.
• Message: 2200: Machine Type and Serial Number are invalid.
Solution: Machine Type and Serial Number are invalid. Have the computer serviced.
• Message: 2201: Machine UUID is invalid.
Solution: Machine UUID is invalid. Have the computer serviced.
Chapter 8. Troubleshooting computer problems
91
• Message: Fan error
Solution: Cooling fan has failed. Have the computer serviced.
• Message: Thermal sensing error
Solution: The thermal sensor is not functioning correctly. Shut down the computer immediately and
have the computer serviced.
Beep errors
Table 6. Beep errors
Beeps
Solution
One short beep, pause, three short beeps, pause, three
more short beeps, pause, and one short beep (1-3-3-1
beeps)
Memory problem. Shut down the computer immediately
and have the computer serviced.
One long and two short beeps
Video problem. Shut down the computer immediately and
have the computer serviced.
Three short beeps, pause, one short beep, pause, one
short beep, pause, and three more short beeps (3-1-1-3
beeps)
PCI resource problem. Shut down the computer
immediately and have the computer serviced.
Four cycles of four short beeps
TCG*-compliant functionality-related problem (might be
the TPM initialization failure). Shut down the computer
immediately and have the computer serviced.
* TCG is the abbreviation for Trusted Computing Group.
Five short beeps
System board problem. Shut down the computer
immediately and have the computer serviced.
Five short beeps, pause, five more short beeps, and
pause
TCG-compliant functionality-related problem (might
be the BIOS code validation failure). Shut down the
computer immediately and have the computer serviced.
Memory module problems
Print these instructions now and keep the instructions with your computer for reference later.
If your memory module is not operating properly, check the following items:
1. Check for error messages during startup.
Follow the appropriate corrective actions for power-on self-test (POST) error messages.
2. Verify that the latest UEFI BIOS for your model has been installed.
3. Verify the proper memory configuration and compatibility including the maximum memory size and the
memory speed.
4. Run the Lenovo Solution Center program.
Networking problems
The following are the most common networking problems:
Ethernet problems
• Problem: The computer cannot connect to the network.
Solution: Make sure that:
– The supported dock is connected correctly to your computer.
92
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
– The cable is installed correctly.
The network cable must be securely connected to the RJ45 connector of the supported dock. The
maximum allowable distance from the computer to the hub is 100 meters (328 feet). If the cable is
connected and the distance is within the limit but the problem persists, try a different cable.
– You are using the correct device driver. To install the correct driver, do the following:
1. Open Control Panel and click Hardware and Sound ➙ Device Manager. If you are prompted for
an administrator password or confirmation, type the password or provide confirmation.
2. If the exclamation mark ! is displayed next to the adapter name under Network adapters, you
might not be using the correct driver or the driver might have been disabled. To update the driver,
right-click the highlighted adapter.
3. Click Update Driver Software, and then follow the instructions on the screen.
– The switch connector and the adapter have the same duplex setting.
If you configured the adapter for full duplex, make sure that the switch connector also is configured
for full duplex. Setting wrong duplex mode can degrade performance, cause data loss, or result in
lost connections.
– You have installed all networking software that is necessary for your network environment.
Check with your LAN administrator for the necessary networking software.
• Problem: The adapter stops working for no apparent reason.
Solution: The network driver files might be corrupt or missing. Update the driver by referring to the
previous solution for the procedure to make sure that the correct device driver is installed.
• Problem: My computer is a Gigabit Ethernet model and I use a speed of 1000 Mbps, but the connection
fails or errors occur.
Solution:
– Use Category 5 wiring and make sure that the network cable is securely connected.
– Connect to a 1000 BASE-T hub/switch (not 1000 BASE-X).
• Problem: The Wake On LAN feature is not working.
Solution: Ensure that Wake On LAN is enabled in ThinkPad Setup. If it is, check with your LAN
administrator for the necessary settings.
• Problem: My computer is a Gigabit Ethernet model, but the computer cannot connect to the network at
1000 Mbps. Instead, it connects at 100 Mbps.
Solution:
– Try another cable.
– Make sure that the link partner is set to auto-negotiate.
– Make sure that the switch is 802.3ab-compliant (gigabit over copper).
A wireless LAN problem
Problem: I cannot connect to the network using the built-in wireless network card.
Solution: Make sure that:
• Your wireless LAN driver is the latest version.
• Your computer is within range of a wireless access point.
• The wireless radio is enabled.
Chapter 8. Troubleshooting computer problems
93
Bluetooth problems
Note: Check your connection anytime and make sure that no other Bluetooth-enabled device is searching for
the device to which you want to connect. Simultaneous searching is not allowed in the Bluetooth connection.
• Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local
speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile.
Solution: Do the following:
1. Exit the application that uses the sound device (for example, Windows Media Player).
2. Open Control Panel and click Hardware and Sound ➙ Sound ➙ Playback.
3. If you are using a Headset profile, select Bluetooth Hands-free Audio and click the Set Default
button. If you are using an AV profile, select Stereo Audio and click the Set Default button.
4. Click OK to close the Sound window.
Problems with the keyboard and other pointing devices
The following are the most common problems with keyboards and other pointing devices.
TrackPoint pointing device problems
• Problem: The pointer drifts when the computer is turned on or after it resumes normal operation.
Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal
operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect. Pointer
drifting might occur for several seconds under the following conditions:
– When the computer is turned on
– When the computer resumes normal operation
– When the TrackPoint pointing device is kept pressed for a long time
– When the temperature changes
• Problem: The TrackPoint pointing device or ThinkPad trackpad does not work.
Solution: Ensure that the TrackPoint pointing device or ThinkPad trackpad is enabled in the ThinkPad
pointing device setting window.
Keyboard problems
• Problem: All or some keys on the keyboard do not work.
Solution: If an external numeric keypad is connected:
1. Turn off the computer.
2. Remove the external numeric keypad.
3. Turn on the computer and try using the keyboard again.
If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the external
keyboard. Ensure that you have seated the connectors correctly.
If the problem persists, ensure that the correct device driver is installed by doing the following:
1. Open Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.
2. Click Keyboard.
3. Select the Hardware tab. In the Device Properties pane, ensure that you see this message: Device
Status: This device is working properly.
If keys on the keyboard still do not work, have the computer serviced.
• Problem: All or some keys on the external numeric keypad do not work.
94
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Solution: Ensure that the external numeric keypad is correctly connected to the computer.
Problems with the display and multimedia devices
This topic includes the most common problems with displays and multimedia devices, including the
computer display, the external monitor, and audio devices.
Computer screen problems
• Problem: The screen is blank.
Solution: Do the following:
– Press the display mode-switching key
to bring up the image.
– If you are using the ac power adapter, or using the battery and the battery gauge shows that the battery
is not depleted, press the brightness-up key
to make the screen brighter.
– If your computer is in sleep mode, press Fn to resume from the sleep mode.
– If the problem persists, follow the solution for the following problem.
• Problem: Incorrect characters are displayed on the screen.
Solution: Did you install the operating system or application program correctly? If they are installed and
configured correctly, have the computer serviced.
• Problem: The screen stays on even after you turn off your computer.
Solution: Press and hold the power button for four seconds or more to turn off your computer; then
turn it on again.
• Problem: Missing, discolored, or bright dots appear on the screen every time you turn on your computer.
Solution: This is an intrinsic characteristic of the TFT technology. Your computer display contains
multiple thin-film transistors (TFTs). A small number of missing, discolored, or bright dots on the screen
might exist all the time.
• Problem: My screen keeps blanking when I do not want it to.
Solution:
1. Go the desktop and click the battery-status icon in the windows notification area.
2. Click More power options ➙ Show additional plans ➙ High performance.
• Problem: When I turn on the computer, nothing is displayed on the screen and the computer does not
beep while starting up.
Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the
power button for four seconds or more. Turn it on and listen again.
Solution: Ensure that:
– The battery is installed correctly.
– The ac power adapter is connected to the computer and the power cord is plugged into a working
electrical outlet.
– The computer is turned on. (Turn the power button on again for confirmation.)
If a power-on password is set:
– Press any key to display the prompt for the power-on password. If the brightness level of the screen is
low, increase it by pressing the brightness-up key
– Type the correct password and press Enter.
Chapter 8. Troubleshooting computer problems
95
If these items are correctly set, and the screen remains blank, have the computer serviced.
• Problem: When I turn on the computer, only a white pointer is displayed on a blank screen.
Solution: If you have modified a partition on your hard disk drive or hybrid drive by using partition
software, information about that partition, or the master boot record might have been destroyed.
1. Turn off the computer, and then turn it on again.
2. If you still see only the pointer on the screen, do the following:
– If you have used the partition software, examine the partition on the hard disk drive or hybrid drive
by using the software, and recover the partition if required.
– Use the recovery solutions to restore the system.
If the problem persists, have the computer serviced.
External monitor problems
• Problem: The external monitor is blank.
Solution: To bring up the image, press the display mode-switching key
monitor. If the problem persists, do the following:
and select the desired
1. Connect the external monitor to another computer to ensure that it works.
2. Reconnect the external monitor to your computer.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that
are supported.
– If the external monitor supports the same resolution as the computer display or a higher resolution,
view output on the external monitor or on both the external monitor and the computer display.
– If the external monitor supports a lower resolution than the computer display, view output on the
external monitor only. (If you view output on both the computer display and the external monitor,
the external monitor screen will be blank or distorted.)
• Problem: You cannot set a higher resolution than the present one on your external monitor.
Solution: Make sure that the monitor type and other information is correct. If necessary, update the
monitor driver. See “Using an external display” on page 39.
• Problem: The screen is unreadable or distorted.
Solution: Ensure that:
– The monitor information is correct and the appropriate monitor type is selected. Refer to the solution
to the above problem.
– Ensure that an appropriate refresh rate is selected by doing the following:
1. Connect the external monitor to your computer, and then connect the external display to an
electrical outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Display settings, show the displayed window in full screen,
and then click Advanced display settings.
Note: If your computer cannot detect the external display, click the Detect button.
4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).
5. Click Display adapter properties.
6. Click the Monitor tab.
7. Select the correct screen refresh rate.
96
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
• Problem: Wrong characters are displayed on the screen.
Solution: Did you follow the correct procedure when installing the operating system or application
program? If you did, have the external monitor serviced.
• Problem: The Extend desktop function does not work.
Solution: Enable the Extend desktop function by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
4. Click the Monitor-2 icon.
5. Select Extend these displays for multiple displays.
6. Click the Monitor-1 icon (for the primary display, the computer display).
7. Set the resolution for the primary display.
8. Click the Monitor-2 icon (for the external monitor).
9. Set the screen resolution for the secondary display.
10. Set the relative position of each monitor by dragging its icon. You can set the monitors in any relative
position, but the icons must touch each other.
11. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click
Advanced Settings, select the Monitor tab, then set Colors.
• Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh
rate on the secondary display.
Solution: Change the resolution and the color depth to lower settings for the primary display. Refer
to the solution to the above problem.
• Problem: Display switching does not work.
Solution: If you use the Extend desktop function, disable it, and change the display output location. If
a DVD movie or a video clip is playing, stop the playback, close the application, and then change the
display output location.
• Problem: The screen position on the external monitor is incorrect when that monitor is set for a high
resolution.
Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left or
right on the screen. To correct this, first ensure that your external monitor supports the display mode
(the resolution and the refresh rate) that you have set. If it does not, set a display mode that the monitor
supports. If it does support the display mode you have set, go to the setup menu for the monitor itself
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For
details, see the documentation that comes with the monitor.
Audio problems
• Problem: Wave or MIDI sound does not play correctly.
Solution: Ensure that the built-in audio device is configured correctly.
1. Open Control Panel.
2. Click Hardware and Sound.
Chapter 8. Troubleshooting computer problems
97
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. Double-click Sound, video and game controllers.
5. Make sure that the Conexant HD Audio driver is enabled and configured correctly.
• Problem: Recordings made using the microphone input are not loud enough.
Solution: Ensure that the Microphone Boost function is turned on and set by doing the following:
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Sound.
4. Click the Recording tab in the Sound window.
5. Select Microphone, and click the Properties button.
6. Click the Levels tab, and move the Microphone Boost slider upwards.
7. Click OK.
Note: For details about controlling volume, refer to your Windows online help.
• Problem: A volume or balance slider cannot be moved.
Solution: The slider might be grayed out. This means that its position is fixed by the hardware and
cannot be changed.
• Problem: The volume sliders do not stay in place when some audio applications are used.
Solution: It is normal for the sliders to change position when certain sound applications are used. The
applications are aware of the settings in the Volume Mixer window and are allowed to change the settings
themselves. An example is the Windows Media Player. Usually the application has sliders available
to control the sound from within the application.
• Problem: The balance slider cannot completely mute one channel.
Solution: The control is designed to compensate for minor differences in balance and does not
completely mute either channel.
• Problem: There is no volume control for MIDI sound in the Volume Mixer window.
Solution: Use the hardware volume control. This is because the built-in synthesizer software does
not support the control.
• Problem: The sound cannot be turned off completely even if you set the Volume Mixer at minimum.
Solution: You still can hear some sound even though you have set the Volume Mixer control at minimum.
To turn off the sound completely, go to the Volume Mixer by clicking the speaker icon in the windows
notification area, then click Mixer. Click the Mute Speaker icon.
• Problem: When you connect a headphone to your computer while playing sound, a speaker does not
produce sound in the MULTI-STREAM mode at Conexant HD Audio Manager.
Solution: Once the headphone is attached, the streaming is automatically redirected to it. If you want
to listen to sound from the speakers again, be sure to set those speakers as the default device. The
procedure is as follows:
1. Open Control Panel. Click Hardware and Sound.
2. Click the Conexant HD Audio Manager icon. The Conexant HD Audio Manager window opens.
98
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
3. Look at the tabs of playback devices. If you have attached a headphone, the headphone will be
automatically set as the default device, and the headphone tab icon will be checked.
4. To set a different device as the default, click the speaker tab. Click the Set Default Device drop
down list box. Select Set Default Device. That speaker tab icon will now have a check mark.
5. Play any sound by use of a music program such as Windows Media Player. Ensure that sound
comes from the speakers.
For details, refer to the help information system for Conexant HD Audio Manager.
Battery and power problems
This topic contains instructions on troubleshooting battery and power problems.
Battery problems
• Problem: The built-in battery cannot be fully charged in the standard charge time when the computer is
powered off.
Solution: The battery might be over-discharged. Do the following:
1. Turn off the computer.
2. Connect the ac power adapter to the computer and let it charge.
If a quick charger is available, use it to charge the over-discharged built-in battery.
If the built-in battery cannot be fully charged in 24 hours, call Lenovo Customer Service Center to have
it serviced.
• Problem: Your computer shuts down before the battery-status icon shows that the battery is empty, or
the computer operates after the battery-status icon shows that the battery is empty.
Solution: Discharge and recharge the built-in battery.
• Problem: The operating time for a fully charged built-in battery is short.
Solution: Discharge and recharge the built-in battery. If your battery operating time is still short, call
Lenovo Customer Service Center to have it serviced.
• Problem: The computer does not operate with a fully charged built-in battery.
Solution: The surge protector in the built-in battery might be active. Turn off the computer for one minute
to reset the protector; then turn on the computer again.
• Problem: The built-in battery cannot be charged.
Solution: You cannot charge the battery when it is too hot. Turn off the computer and allow it to cool to
room temperature. After it cools, recharge the battery. If it still cannot be charged, call Lenovo Customer
Service to have it serviced.
An ac power adapter problem
Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the
power adapter (power plug) icon is not displayed on the windows notification area. Also the system-status
indicator does not blink.
Solution: Do the following:
1. Ensure that the connection of the ac power adapter is correct. For instructions on connecting the ac
power adapter, see Safety, Warranty, and Setup Guide that comes with your computer.
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac
power adapter.
Chapter 8. Troubleshooting computer problems
99
3. Reconnect the ac power adapter, then turn on the computer.
4. If the power adapter icon still is not displayed on the windows notification area and the system-status
indicator does not blink, have the ac power adapter and your computer serviced.
Note: To display the power adapter (power plug) icon, click Show hidden icons on the windows notification
area.
Power problems
Print these instructions now and keep the instructions with your computer for reference later.
If your computer is getting no power at all, check the following items:
1. Verify the power button. Refer to “Status indicators” on page 6. The power button is lit whenever the
computer is on.
2. Check all power connections. Remove any power strips and surge protectors to connect the ac power
adapter directly to the ac power outlet.
3. Inspect the ac power adapter. Check for any physical damage, and ensure that the power cable is firmly
attached to the adapter brick and the computer.
4. Verify the ac power source is working by attaching another device to the outlet.
If your computer does not run on battery power, do the following:
1. If the battery runs out of power, attach ac power adapter to recharge the battery.
2. If the battery is charged but the computer does not run, call Lenovo Customer Service Center to have
it serviced.
A power button problem
Problem: The system does not respond, and you cannot turn off the computer.
Solution: Turn off the computer by pressing and holding the power button for 4 seconds or more. If the
system is still not reset, remove the ac power adapter and reset the system by inserting a straightened paper
clip into the emergency-reset hole. To locate the emergency-reset hole, refer to “Bottom view” on page 5.
Boot problems
Print these instructions now and keep them with your computer for reference later.
If you receive an error message before the operating system loads, follow the appropriate corrective actions
for POST error messages.
If you receive an error message while the operating system is loading the desktop configuration after the
POST is completed, check the following items:
1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message.
2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the
error message.
Sleep and hibernation problems
• Problem: The computer enters sleep mode unexpectedly.
Solution: If the microprocessor overheats, the computer automatically enters sleep mode to allow the
computer to cool and to protect the microprocessor and other internal components. Check the settings
for sleep mode.
100
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
• Problem: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on
self-test.
Solution: Ensure that:
– The battery is charged.
– The operating temperature is within the acceptable range. Refer to “Operating environment” on page
11.
If the battery is charged and the temperature is within range, have the computer serviced.
• Problem: A critical low-battery error occurs, and the computer immediately turns off.
Solution: The battery power is getting low. Connect the ac power adapter to the computer and plug it
into an electrical outlet.
• Problem: The computer display remains blank after you press Fn to return from sleep mode.
Solution: Check whether an external monitor was disconnected or turned off while the computer was
in sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on before
resuming the computer from the sleep mode. When resuming the computer from the sleep mode without
attaching the external monitor or turning it on, and the computer display remains blank, press the display
mode-switching key
to bring up the computer display.
• Problem: The computer does not return from sleep mode, or the system-status indicator (illuminated
ThinkPad logo) blinks slowly and the computer does not work.
Solution: If the system does not return from sleep mode, it might have entered sleep or hibernation
mode automatically because the battery is depleted. Check the system-status indicator (illuminated
ThinkPad logo).
– If the system-status indicator (illuminated ThinkPad logo) blinks slowly, your computer is in sleep mode.
Connect the ac power adapter to the computer; then press Fn.
– If the system-status indicator (illuminated ThinkPad logo) is off, your computer is in power-off state or
in hibernation mode. Connect the ac power adapter to the computer; then press the power button
to resume operation.
If the system still does not return from sleep mode, your system might stop responding and you might
not be able to turn off the computer. In this case, you need to reset the computer. If you have not
saved your data, it might be lost. To reset the computer, press and hold the power button for 4 seconds
or more. If the system is still not reset, remove the ac power adapter and reset the system by inserting
a straightened paper clip into the emergency-reset hole. To locate the emergency-reset hole, refer to
“Bottom view” on page 5.
• Problem: Your computer does not enter sleep or hibernation mode.
Solution: Check whether any option has been selected to disable your computer from entering sleep
or hibernation mode.
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB
connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB
device.
• Problem: The battery discharges slightly while the computer is in hibernation mode.
Solution: If the wakeup function is enabled, the computer consumes a small amount of power. This is not
a defect. For details, refer to “Power-saving modes” on page 37.
Problems with drives and other storage devices
This section includes hard disk drive or hybrid drive problems and solid-state drive problems.
Chapter 8. Troubleshooting computer problems
101
hard disk drive or hybrid drive problems
• Problem: The hard disk drive or hybrid drive makes a rattling noise intermittently.
Solution: The rattling noise might be heard:
– When the hard disk drive or hybrid drive begins or finishes getting access to data.
– When you carry the hard disk drive or hybrid drive.
– When you carry your computer.
This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect.
• Problem: The hard disk drive or hybrid drive does not work.
Solution: On the Boot menu of ThinkPad Setup, ensure that the hard disk drive or hybrid drive is on the
Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it
on the list and press the Shift+1 key. This moves the entry to the Boot priority order list.
• Problem: After setting a hard disk password on the hard disk drive or hybrid drive of the computer, you
moved the drive to another computer. Now you cannot unlock the hard disk password.
Solution: Your computer supports an enhanced password algorithm. Computers older than yours might
not support such a security function.
A solid-state drive problem
Problem: When you compress files or folders by use of the data compression function in Windows, and
then decompress them, the process of writing to or reading from the files or folders is slow.
Solution: Apply the disk defragmentation tool in Windows for faster access to the data.
A software problem
Problem: An application does not run correctly.
Solution: Ensure that the problem is not being caused by the application.
Check that your computer has the minimum required memory to run the application. Refer to the manuals
supplied with the application.
Check the following:
• The application is designed to operate with your operating system.
• Other applications run correctly on your computer.
• The necessary device drivers are installed.
• The application works when it is run on some other computer.
If an error message is displayed while you are using the application program, refer to the manuals supplied
with the application.
If the application still does not run correctly, contact your place of purchase or a service representative
for help.
Problems with ports and connectors
The following are the most common problems with ports and connectors.
102
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
A USB problem
Problem: A device connected to the USB connector does not work.
Solution: Open the Device Manager window. Ensure that the USB device setup is correct, and that the
assignment of computer resource and the installation of the device driver are correct. To open the Device
Manager window, go to Control Panel and click Hardware and Sound ➙ Device Manager. If you are
prompted for an administrator password or confirmation, type the password or provide confirmation.
Refer to “Diagnosing problems” on page 89 for a diagnostic test of the USB connector.
A ThinkPad Pen Pro problem
Problem: The ThinkPad Pen Pro does not perform well.
Solution: If the pen does not perform well, insert the pen into the pen slot to charge it for about five minutes.
Note: Ensure that your computer is on or in sleep mode. Otherwise, the pen will not be charged.
Chapter 8. Troubleshooting computer problems
103
104
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 9. Recovery overview
This chapter provides information about the recovery solutions provided by Lenovo.
Recovery overview for the Windows 10 operating system
The Windows recovery programs enable you to reset your computer or use advanced startup options.
It is recommended that you create a recovery USB drive as early as possible. Store the recovery USB drive
as a backup or replacement for the Windows recovery programs.
For more information, see “Creating and using a recovery USB drive” on page 106.
Resetting your computer
If your computer does not perform well, you might consider resetting your computer. In the resetting process,
you can choose to keep your files or remove them, and then reinstall the Windows operating system.
To reset your computer, do the following:
Note: The graphical user interface (GUI) items of the operating system might change without notice.
1. Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all
programs, and then click Settings ➙ Update & security ➙ Recovery.
2. In the Reset this PC section, click Get started.
3. Follow the instructions on the screen to reset your computer.
Using advanced startup options
With advanced startup options, you can change the firmware settings of the computer, change the startup
settings of the Windows operating system, start the computer from an external device, or restore the
Windows operating system from a system image.
To use advanced startup options, do the following:
Note: The GUI items of the operating system might change without notice.
1. Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all
programs, and then click Settings ➙ Update & security ➙ Recovery.
2. In the Advanced startup section, click Restart now ➙ Troubleshoot ➙ Advanced options.
3. Select a desired startup option, then follow the instructions on the screen.
Recovering your operating system if Windows 10 fails to start
The Windows recovery environment on your computer is capable of operating independently from the
Windows 10 operating system. This enables you to recover or repair the operating system even if the
Windows 10 operating system fails to start.
After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then
you can choose repair and recovery options by following the instructions on the screen.
Note: Ensure that your computer is connected to ac power during the recovery process.
© Copyright Lenovo 2015
105
Creating and using a recovery USB drive
You can create a recovery USB drive as a backup for the Windows recovery programs. With the recovery
USB drive, you can troubleshoot and fix the problems even if the preinstalled Windows recovery programs
are damaged.
Creating a recovery USB drive
The USB drive that you use to create the recovery USB drive must be at least 16 GB of storage. The actual
USB capacity that is required depends on the size of the recovery image.
Attention: The creation process deletes anything stored on the USB drive. To avoid data loss, make a
backup copy of all the data that you want to keep.
To create a recovery USB drive, do the following:
Note: Ensure that your computer is connected to ac power during the following process.
1. Connect a proper USB drive (at least 16 GB of storage).
2. Type recovery in the search box on the taskbar. Then click Create a recovery drive.
3. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start.
4. In the Recovery Drive window, follow the on-screen instructions to create a recovery USB drive.
Using the recovery USB drive
If you cannot start your computer, refer to the corresponding information in the topic “Troubleshooting” on
page 89 to try to solve the problem by yourself. If you still cannot start your computer, use the recovery
USB drive to recover your computer.
To use a recovery USB drive, do the following:
Note: Ensure that your computer is connected to ac power.
1. Connect the recovery USB drive to the computer.
2. Turn on or restart the computer. Before the Windows operating system starts, repeatedly press the F12
key. The Boot Menu window opens.
3. Select the recovery USB drive as the boot device.
4. Select a preferred keyboard layout.
5. Click Troubleshoot to display the optional recovery solutions.
6. Select a corresponding recovery solution according to your situation. Then follow the instructions on
the screen to complete the process.
106
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 10. Replacing devices
This chapter provides instructions on how to install or replace hardware for your computer.
•
“Static electricity prevention” on page 107
•
“Disabling the built-in battery” on page 107
•
“Installing or replacing the micro SIM card” on page 108
•
“Replacing the keyboard” on page 110
•
“Replacing the base cover assembly” on page 114
•
“Replacing the memory module” on page 117
•
“Replacing the internal storage drive” on page 118
•
“Replacing the button I/O card” on page 121
•
“Replacing the ac power card” on page 122
•
“Replacing the speaker assembly” on page 126
•
“Replacing the coin-cell battery” on page 128
Static electricity prevention
Static electricity, although harmless to you, can seriously damage computer components and options.
Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or
a CRU, do not open the static-protective package that contains the part until the instructions direct you
to install the part.
When you handle options or CRUs, or perform any work inside the computer, take the following precautions
to avoid static-electricity damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the
edges. Never touch exposed circuitry.
• Prevent others from touching components.
• When you install a static-sensitive option or CRU, touch the static-protective package that contains the
part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two
seconds. This reduces static electricity in the package and your body.
• When possible, remove the static-sensitive part from the static-protective package and install the part
without setting it down. When this is not possible, place the static-protective package on a smooth,
level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Disabling the built-in battery
Before replacing any hardware component except the removable battery, ensure that you have disabled the
built-in battery by doing the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. When the ThinkPad logo is displayed, immediately press F1 to enter ThinkPad
Setup.
3. Select Config ➙ Power. The Power submenu is displayed.
4. Select Disable built-in battery and press Enter.
© Copyright Lenovo 2015
107
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.
Installing or replacing the micro SIM card
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
If your computer supports wireless WAN connections, your computer might require a micro SIM card to
establish wireless WAN connections. Depending on the country or region of delivery, you might need to
purchase a micro SIM card, or a micro SIM card might already be installed in your computer, or is part of the
shipping contents that come with your computer.
Attention: When installing or removing the micro SIM card, do not touch the micro SIM card metal
connectors. Always hold the tablet in your hand before you install or remove the micro SIM card to avoid
electrostatic discharges.
To install or replace the micro SIM card, do the following:
1. Turn off the computer or put the computer into hibernation mode. Then disconnect the ac power
adapter and all cables from the computer.
2. Locate the micro-SIM-card tray at the rear of the computer.
3. Insert a straightened paper clip into the hole in the micro-SIM-card tray 1 . The micro-SIM-card tray
ejects 2 . Then, slide the micro-SIM-card tray out of the computer.
108
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
4. Gently take the micro SIM card out of the tray.
5. Install a new micro SIM card into the micro-SIM-card tray.
6. Insert the tray into the computer.
7. Reconnect the ac power adapter and all cables.
Chapter 10. Replacing devices
109
Replacing the keyboard
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Removing the keyboard
To remove the keyboard, do the following:
Note: Your computer might look different from the illustrations in this topic.
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Disconnect the ac power adapter and all cables from the computer. Wait several minutes to let the
computer cool.
3. Close the computer display and turn the computer over.
4. Remove the screws that secure the keyboard.
110
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
5. Push hard in the direction shown by the arrows to unlatch the front edge of the keyboard (the edge
that is close to you).
6. Pivot the keyboard slightly upward as shown by arrow 1 . Then turn the keyboard over as shown
by arrow 2 .
Chapter 10. Replacing devices
111
7. Detach the connectors and remove the keyboard.
Installing the new keyboard
To install the new keyboard, do the following:
1. Attach the connectors and then turn the keyboard over.
112
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
2. Insert the keyboard as shown by the arrows. Ensure that the rear edge of the keyboard (the edge that is
close to the computer display) is under the frame of the keyboard bezel.
3. Slide the keyboard in the direction shown by the arrows until the latches of the keyboard are hidden
under the keyboard bezel.
Chapter 10. Replacing devices
113
4. Turn the computer over and reinstall the screws.
5. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the base cover assembly
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
To replace the base cover assembly, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the screw caps 1 and the screw 2 .
114
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
4. Loosen the rest of the screws that secure the base cover assembly.
5. Pry up the latches and then remove the base cover assembly.
Chapter 10. Replacing devices
115
6. Install the new base cover assembly in place.
7. Tighten the screws to secure the base cover assembly.
8. Resinstall the screw 1 and the screw caps 2 .
9. Turn the computer over again. Connect the ac power adapter and all cables.
116
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Replacing the memory module
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Increasing memory capacity is an effective way to make programs run faster. To replace the memory
module, read the following prerequisites, and then the instructions.
Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. Static electricity could damage the memory module.
Replacing the memory module
To replace the memory module, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
4. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory
module 2 .
Chapter 10. Replacing devices
117
5. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Insert the memory module into the memory slot at an angle of about 20 degrees 1 . Pivot the memory
module downward until it snaps into place 2 . Ensure that the memory module is firmly installed in
the memory slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
6. Reinstall the base cover assembly.
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the internal storage drive
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Attention: The internal storage drive (hard disk drive, solid-state drive, or hybrid drive) is sensitive. Incorrect
handling can cause damage and permanent loss of data. Observe the following guidelines:
• Replace the storage drive only if you upgrade it or have it repaired. The connectors and slot of the storage
drive are not designed for frequent changes, or drive swapping.
• Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that
absorbs any physical shocks.
• Do not apply pressure to the cover of the drive.
• Do not touch the connector.
• Before removing the storage drive, make a backup copy of all the information on it, and then turn off the
computer.
• Never remove the drive while the computer is operating, in sleep mode, or in hibernation mode.
To replace the storage drive, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
118
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
4. Detach the connector.
5. Take the drive tab and lift the drive. Then take the drive out of the drive bay.
6. Disconnect the drive cable from the storage drive.
Chapter 10. Replacing devices
119
7. Reconnect the drive cable to the new storage drive.
8. Place the new drive into the drive bay.
Note: Ensure that the tiny tabs a on the storage drive bracket are correctly secured by the
corresponding hooks of the storage-drive retaining frame.
9. Attach the connector.
10. Reinstall the base cover assembly.
120
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
11. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the button I/O card
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
To replace the button I/O card, do the following:
Attention: Sensitive components are mounted on the button I/O card. Avoid any kind of rough handling
during the replacement.
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
4. Detach the connector.
5. Remove the button I/O card as shown.
Chapter 10. Replacing devices
121
6. Insert the new button I/O card.
7. Attach the connector.
8. Reinstall the base cover assembly.
9. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the ac power card
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
To replace the ac power card, do the following:
Attention: Sensitive components are mounted on the card. Avoid any kind of rough handling during the
replacement.
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
122
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
4. Disconnect the cable from the ac power card.
5. Remove the screws that secure the ac power card.
Chapter 10. Replacing devices
123
6. Remove the dc-in bracket.
7. Remove the ac power card.
124
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
8. Install the new ac power card in place.
9. Install the dc-in bracket in place.
Chapter 10. Replacing devices
125
10. Reinstall the screws to secure the ac power card.
11. Reconnect the cable.
12. Reinstall the base cover assembly.
13. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the speaker assembly
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
To replace the speaker assembly, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
126
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
4. Remove the button I/O card. See “Replacing the button I/O card” on page 121.
5. Detach the connectors.
6. Remove the screws. Then remove the speaker assembly.
Chapter 10. Replacing devices
127
7. Install the new speaker assembly in place. Then install the screws to secure the speaker assembly.
8. Reattach the connectors.
9. Reinstall the button I/O card. See “Replacing the button I/O card” on page 121.
10. Reinstall the base cover assembly.
11. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing the coin-cell battery
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
128
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
DANGER
If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery
contains a small amount of harmful substances. To avoid possible injury:
• Replace only with a battery of the type recommended by Lenovo.
• Keep the battery away from fire.
• Do not expose it to excessive heat.
• Do not expose it to water or rain.
• Do not short-circuit it.
• Do not drop, crush, puncture the battery, or make it subject to strong forces. Battery abuse or
mishandling can cause the battery to overheat, which can cause gasses or flame to “vent”
from the coin-cell battery.
To replace the coin-cell battery, do the following:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 114.
4. Detach the connector 1 , and then remove the coin-cell battery 2 .
5. Install the new coin-cell battery 1 , and then attach the connector 2 .
6. Reinstall the base cover assembly.
Chapter 10. Replacing devices
129
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
130
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 11. Getting support
This chapter provides information about getting help and support from Lenovo.
•
“Before you contact Lenovo” on page 131
•
“Getting help and service” on page 131
•
“Purchasing additional services” on page 133
Before you contact Lenovo
Often, you can solve your computer problems by referring to the information in the explanations of error
codes, running diagnostic programs, or by consulting the Lenovo Web site.
Registering your computer
Register your computer with Lenovo. For more information, see “Registering your computer” on page 15.
Downloading system updates
Downloading updated software might resolve problems you experience with your computer.
To download updated software, go to the following Web site and follow the instructions on the screen:
http://www.lenovo.com/support
Recording information
Before you talk to a Lenovo representative, record the following important information about your computer.
Recording problem symptoms and details
Collect the answers to the questions below before you call for help. Then, you will be able to get help
as quickly as possible.
• What is the problem? Is it continuous or intermittent?
• Is there an error message? What is the error code, if any?
• What operating system are you using? Which version?
• Which software applications were running at the time of the problem?
• Can the problem be reproduced? If so, how?
Recording system information
The serial number label is on the bottom of your computer. Record the machine type and the serial number.
• What is the name of your Lenovo product?
• What is the machine type?
• What is the serial number?
Getting help and service
If you need help, service, technical assistance, or just want more information about Lenovo products, you
will find a wide variety of sources available from Lenovo to assist you. This section contains information
about where to go for additional information about Lenovo and our products, what to do if you experience a
problem with your computer, and whom to call for service should it be necessary.
© Copyright Lenovo 2015
131
Information about your computer and preinstalled software, if any, is available in the documentation that
comes with your computer. That documentation includes printed books, online books, readme files, and
help files. In addition, information about Lenovo products is available on the World Wide Web.
Microsoft Service Packs are the latest software source for Windows product updates. They are available
through Web download (connection charges might apply) or through disc. For more specific information and
links, go to http://www.microsoft.com. Lenovo offers technical assistance with installation of, or questions
related to, Service Packs for your Lenovo-preloaded Microsoft Windows product. For information, contact
the Customer Support Center.
Using diagnostic programs
Many computer problems can be solved without outside assistance. If you experience a problem with your
computer, the first place to start is the troubleshooting information of your computer documentation. If you
suspect a software problem, see the documentation, including readme files and help information systems,
which comes with the operating system or application program.
ThinkPad notebook computers come with a set of diagnostic programs that you can use to help you identify
hardware problems. See “Diagnosing problems” on page 89 for instructions on using the diagnostic
programs.
The troubleshooting information or the diagnostic programs might tell you that you need additional or
updated device drivers or other software. You can get the latest technical information and download device
drivers and updates from the Lenovo Web site at http://www.lenovo.com/support.
Lenovo Support Web site
Technical support information is available on the Lenovo Support Web site at:
http://www.lenovo.com/support
This Web site is updated with the latest support information such as the following:
• Drivers and software
• Diagnostic solutions
• Product and service warranty
• Product and parts details
• User guides and manuals
• Knowledge base and frequently asked questions
Calling Lenovo
If you have tried to correct the problem yourself and still need help, during the warranty period, you can
get help and information by telephone through the Customer Support Center. The following services are
available during the warranty period:
• Problem determination - Trained personnel are available to assist you with determining if you have a
hardware problem and deciding what action is necessary to fix the problem.
• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty,
trained service personnel are available to provide the applicable level of service.
• Engineering change management - Occasionally, there might be changes that are required after a product
has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes
(ECs) that apply to your hardware available.
132
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
The following items are not covered:
• Replacement or use of parts not manufactured for or by Lenovo or non-warranted parts
•
•
•
•
•
Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX or a
10-character identification in the format FRU XXXXXXXXXX.
Identification of software problem sources
Configuration of UEFI BIOS as part of an installation or upgrade
Changes, modifications, or upgrades to device drivers
Installation and maintenance of network operating systems (NOS)
Installation and maintenance of application programs
For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product,
see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer.
If possible, be near your computer when you make your call in case the technical assistance representative
needs to help you resolve a computer problem. Ensure that you have downloaded the most current drivers
and system updates, run diagnostics, and recorded information before you call. When calling for technical
assistance, have the following information available:
• Machine type and model
• Serial numbers of your computer, monitor, and other components, or your proof of purchase
• Description of the problem
• Exact wording of any error messages
• Hardware and software configuration information for your system
Telephone numbers
For a list of the Lenovo Support phone numbers for your country or region, go to
http://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes with
your computer.
Note: Phone numbers are subject to change without notice. The latest phone numbers are available at
http://www.lenovo.com/support/phone. If the number for your country or region is not provided, contact
your Lenovo reseller or Lenovo marketing representative.
Purchasing additional services
During and after the warranty period, you can purchase additional services, such as support for Lenovo
and non-Lenovo hardware, operating systems, and application programs; network setup and configuration
services; upgraded or extended hardware repair services; and custom installations services. Service
availability and service name might vary by country.
For more information about these services, go to:
http://www.lenovo.com/essentials
Chapter 11. Getting support
133
134
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix A. Regulatory information
The latest compliance information is available at http://www.lenovo.com/compliance.
Location of the UltraConnect wireless antennas
ThinkPad notebook computers feature an UltraConnect™ wireless antenna system built into the display for
optimal reception, which enables you to establish wireless communications wherever you are.
Note: Depending on the model, your computer might look different from the following illustration.
Wireless-LAN antenna (auxiliary)
Wireless-LAN antenna (main)
Wireless-WAN antenna (main) (available on some models)
Wireless-WAN antenna (auxiliary) (available on some models)
Wireless related information
Wireless interoperability
The wireless LAN card is designed to be interoperable with any wireless LAN product that is based on DSSS,
CCK, and/or OFDM radio technology, and is compliant to:
• The 802.11b/g Standard, 802.11a/b/g, 802.11n, or, 802.11ac on Wireless LANs, as defined and approved
by the Institute of Electrical and Electronics Engineers.
• The WiFi certification as defined by the Wi-Fi Alliance.
© Copyright Lenovo 2015
135
A Bluetooth device is designed to be interoperable with any Bluetooth product that is compliant to Bluetooth
Specification 4.0 as defined by the Bluetooth SIG. The following profiles are supported by the Bluetooth
devices:
Note: Depending on the Bluetooth card and the operating system you use, some profiles might not
be available.
• Advanced Audio Distribution Profile (A2DP)
• Audio/Video Control Transport Protocol (AVCTP)
• Audio/Video Distribution Transport Protocol (AVDTP)
• A/V Remote Control Profile (AVRCP)
• Basic Imaging Profile (BIP)
• Basic Printing Profile (BPP)
• Dial-Up Networking Profile (DUN)
• File Transfer Profile (FTP)
• Generic Access Profile (GAP)
• Generic A/V Distribution Profile (GAVDP)
• Hardcopy Cable Replacement Profile (HCRP)
• Headset Profile (HSP)
• Hands-Free Profile (HFP)
• Human Interface Device Profile (HID)
• Message Access Profile (MAP)
• Object Exchange Protocol (OBEX)
• Object Push Profile (OPP)
• Personal Area Networking Profile (PAN)
• Phone Book Access Profile (PBAP)
• Service Discovery Protocol (SDP)
• Synchronization Profile (SYNC)
• Video Distribution Profile (VDP)
• Generic Attribute Profile (GATT)
• Proximity Profile
• Find Me Profile
• Immediate Alert Profile
• Battery Status Profile
Usage environment and your health
Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the
level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like
for example mobile phones.
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety
standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the extensive research literature.
136
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
In some situation or environment, the use of integrated wireless cards might be restricted by the proprietor
of the building or responsible representatives of the organization. These situations and areas might for
example include:
• Using the integrated wireless cards on board of airplanes, in hospitals or near petrol stations, blasting
areas (with electro-explosive devices), medical implants or body-worn electronic medical devices, such
as pace makers.
• In any other environment where the risk of interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific organization (such as
airport or hospital), you are encouraged to ask for authorization to use integrated wireless cards prior to
turning on the computer.
Wireless-radio compliance information
Computer models equipped with wireless communications comply with the radio frequency and safety
standards of any country or region in which it has been approved for wireless use.
Brazil wireless-radio compliance information
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
This equipment is a secondary type device, that is, it is not protected against harmful interference, even
if the interference is caused by a device of the same type, and it also cannot cause any interference to
primary type devices.
Mexico wireless-radio compliance information
Advertencia: En Mexico la operación de este equipo estásujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Locating wireless regulatory notices
For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with your
computer.
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at:
http://www.lenovo.com/UserManuals
Certification related information
The following table contains information of the product name, compliance ID, and machine types.
Product name
Compliance ID
Machine types
ThinkPad P40 Yoga®
TP00079A
20GR, 20GQ
ThinkPad S3
TP00079A
20G0, 20G1
ThinkPad Yoga 14
TP00079A
20FY
ThinkPad Yoga 460
TP00079A
20EL, 20EM
Appendix A. Regulatory information
137
Export classification notice
This product is subject to the United States Export Administration Regulations (EAR) and has an Export
Classification Control Number (ECCN) of 5A992.c . It can be re-exported except to any of the embargoed
countries in the EAR E1 country list.
Electronic emission notices
Federal Communications Commission Declaration of Conformity
The following information refers to the ThinkPad P40 Yoga, machine types 20GR, 20GQ; ThinkPad S3,
machine types 20G0, 20G1; ThinkPad Yoga 14, machine type 20FY; ThinkPad Yoga 460, machine types
20EL, 20EM.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an authorized dealer or service representative for help.
Lenovo is not responsible for any radio or television interference caused by using other than specified or
recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Lenovo (United States) Incorporated
1009 Think Place - Building One
Morrisville, NC 27560
Phone Number: 919-294-5900
Industry Canada Class B emission compliance statement
CAN ICES-3(B)/NMB-3(B)
138
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
European Union - Compliance to the Electromagnetic Compatibility
Directive
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the installation of option cards from other manufacturers.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived
for typical residential environments to provide reasonable protection against interference with licensed
communication devices.
EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia
German Class B compliance statement
Deutschsprachiger EU Hinweis:
Hinweis für Geräte der Klasse B EU-Richtlinie zur Elektromagnetischen Verträglichkeit
Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) zur
Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten
und hält die Grenzwerte der EN 55022 Klasse B ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu
betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden.
Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt
ohne Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne
Empfehlung der Lenovo gesteckt/eingebaut werden.
Deutschland:
Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Betriebsmitteln
Dieses Produkt entspricht dem „Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln“
EMVG (früher „Gesetz über die elektromagnetische Verträglichkeit von Geräten“). Dies ist die Umsetzung der
EU-Richtlinie 2004/108/EG (früher 89/336/EWG) in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit
von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische
Verträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), für
Geräte der Klasse B.
Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen
- CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo
(Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:
Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.
Appendix A. Regulatory information
139
Korea Class B compliance statement
Japan VCCI Class B compliance statement
Japan compliance statement for products which connect to the power
mains with rated current less than or equal to 20 A per phase
Japan notice for ac power cord
The ac power cord shipped with your product can be used only for this specific product. Do not use the ac
power cord for other devices.
Lenovo product service information for Taiwan
Eurasian compliance mark
Brazil audio notice
Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
140
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix B. WEEE and recycling statements
Lenovo encourages owners of information technology equipment to responsibly recycle their
equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist
equipment owners in recycling their IT products. The latest environmental information is available at
http://www.lenovo.com/ecodeclaration.
Important WEEE information
The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, the European WEEE Directive, India E-Waste Management & Handling Rules, 2011). Appliances are
labeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE).
These regulations determine the framework for the return and recycling of used appliances as applicable
within each geography. This label is applied to various products to indicate that the product is not to be
thrown away, but rather put in the established collection systems for reclaiming these end of life products.
Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of
life EEE as unsorted municipal waste, but use the collection framework available to them for the return,
recycle, and recovery of WEEE and to minimize any potential effects of EEE on the environment and
human health due to the presence of hazardous substances. For additional WEEE information go to:
http://www.lenovo.com/recycling
Japan recycling statements
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property
of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of
Resources. Computers and monitors are categorized as industrial waste and should be properly disposed
of by an industrial waste disposal contractor certified by a local government. In accordance with the Law
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and
Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details,
visit the Lenovo Web site at: http://www.lenovo.com/services_warranty/jp/ja/recycle/pcrecycle/.
Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of
home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service
is provided free of charge for home-used computers sold after October 1, 2003. For details, go to
http://www.lenovo.com/services_warranty/jp/ja/recycle/personal/.
© Copyright Lenovo 2015
141
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other
environmental sensitive substances. To properly dispose of disused components, such as a printed circuit
board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Disposing of disused lithium batteries from Lenovo computers
A button-shaped lithium battery is installed inside your Lenovo computer to provide power to the computer
clock while the computer is off or disconnected from the main power source. If you need to replace it with a
new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused
lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal
operator, and follow their instructions.
Disposal of a lithium battery must comply with local ordinances and regulations.
Disposing of a disused battery pack from Lenovo notebook computers
Your Lenovo notebook computer has a lithium ion battery pack or a nickel metal hydride battery pack. If you
are a company employee who uses a Lenovo notebook computer and need to dispose of a battery pack,
contact the proper person in Lenovo sales, service, or marketing, and follow that person's instructions. You
also can refer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/.
If you use a Lenovo notebook computer at home and need to dispose of a battery pack, you
must comply with local ordinances and regulations. You also can refer to the instructions at
http://www.lenovo.com/jp/ja/environment/recycle/battery/.
Recycling information for Brazil
Declarações de Reciclagem no Brasil
Descarte de um Produto Lenovo Fora de Uso
Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de
coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas
especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de
acordo com a legislação local.
A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos. Caso você possua
um produto Lenovo em situação de descarte, ligue para o nosso SAC ou encaminhe um e-mail para:
reciclar@lenovo.com, informando o modelo, número de série e cidade, a fim de enviarmos as instruções
para o correto descarte do seu produto Lenovo.
Battery recycling information for the European Union
142
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Notice: This mark applies only to countries within the European Union (EU).
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC
concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the
framework for the return and recycling of used batteries and accumulators as applicable throughout the
European Union. This label is applied to various batteries to indicate that the battery is not to be thrown
away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate
that they are to be collected separately and recycled at end of life. The label on the battery may also
include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for
cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted
municipal waste, but use the collection framework available to customers for the return, recycling, and
treatment of batteries and accumulators. Customer participation is important to minimize any potential
effects of batteries and accumulators on the environment and human health due to the potential presence of
hazardous substances. For proper collection and treatment, go to:
http://www.lenovo.com/recycling
Battery recycling information for Taiwan
Battery recycling information for the United States and Canada
Recycling information for China
Appendix B. WEEE and recycling statements
143
144
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix C. Restriction of Hazardous Substances Directive
(RoHS)
The latest environmental information is available at http://www.lenovo.com/ecodeclaration.
European Union RoHS
This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (“RoHS recast” or “RoHS 2”).
For more information about Lenovo worldwide compliance on RoHS, go to:
http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf
© Copyright Lenovo 2015
145
China RoHS
Turkish RoHS
The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use
of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE).
146
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Ukraine RoHS
India RoHS
RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.
Appendix C. Restriction of Hazardous Substances Directive (RoHS)
147
148
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix D. ENERGY STAR model information
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department
of Energy aimed at saving money and protecting the environment through energy efficient products and
practices.
Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might
find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface. Lenovo
computers of the following machine types, if carry an ENERGY STAR mark, have been designed and tested
to conform to the ENERGY STAR program requirements for computers.
20EM, 20EL, 20FY, 20G0, 20G1, 20GR, and 20GQ
By using ENERGY STAR qualified products and taking advantage of the power-management features
of your computer, you can help reduce the consumption of electricity. Reduced electrical consumption
can contribute to potential financial savings, a cleaner environment, and the reduction of greenhouse gas
emissions.
For more information about ENERGY STAR, go to:
http://www.energystar.gov
Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To
help in this endeavor, Lenovo has preset the following power-management features to take effect when your
computer has been inactive for a specified length of time:
Power plan: Default
• Turn off the display: After 10 minutes
• Put the computer into sleep: After 20 minutes
To awaken your computer from sleep mode, press the Fn key on your keyboard. For more information about
these settings, see the Windows help information on your computer.
The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and the
setting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LAN
enabled while your computer is in sleep mode, you can reduce the power consumption and prolong the
time in sleep mode, by disabling the setting of Wake on LAN for sleep mode. To disable the setting of
Wake on LAN for sleep mode, do the following:
1. Go to Control Panel.
2. Click Hardware and Sound ➙ Device Manager.
3. In the Device Manager window, expand Network adapters.
4. Right-click your network adapter device, and click Properties.
5. Click the Power Management tab.
© Copyright Lenovo 2015
149
6. Clear the Allow this device to wake the computer check box.
7. Click OK.
150
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix E. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult
your local Lenovo representative for information on the products and services currently available in your
area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that
Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service
that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's
responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in this
document does not affect or change Lenovo product specifications or warranties. Nothing in this document
shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo
or third parties. All information contained in this document was obtained in specific environments and is
presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of
the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result
obtained in other operating environments may vary significantly. Some measurements may have been
made on development-level systems and there is no guarantee that these measurements will be the same
on generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.
© Copyright Lenovo 2015
151
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
Lenovo logo
Active Protection System
Secure Data Disposal
ThinkPad
ThinkPad logo
TrackPoint
UltraConnect
Yoga
Intel, Intel SpeedStep, and Intel vPro are trademarks of Intel Corporation in the U. S. and/or other countries.
BitLocker, Microsoft, and Windows are trademarks of the Microsoft group of companies.
The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
152
ThinkPad P40 Yoga, ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Arbortext Build                 : R60M075-303
Compression Level               : 6
Compression Type                : auto
Config File                     : D:\PTC\ArbortextPE_6.0\lib\standard.pdfcf
Create Date                     : 2015:10:23 15:01:07+08:00
Creator                         : Arbortext Publishing Engine
EPS Processor                   : PStill version 1.78.16
Graphics Resolution             : 600
Graphics Resolution Threshold   : 900
JPEG Quality                    : 80
Modify Date                     : 2016:01:25 19:56:30+08:00
Print Engine                    : Arbortext FOSI Print Publisher
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Arbortext 0020 Build            : R60M075-303
Compression 0020level           : 6
Compression 0020type            : auto
Config 0020 File                : D:\PTC\ArbortextPE_6.0\lib\standard.pdfcf
EPS0020processor                : PStill version 1.78.16
Graphics 0020resolution         : 600
Graphics 0020resolution 0020threshold: 900
JPEG0020quality                 : 80
Print 0020 Engine               : Arbortext FOSI Print Publisher
Stylesheet                      : D:\PTC\ArbortextPE_6.0\custom\doctypes\ditabase\8.5x11_book_hel.style
Creator Tool                    : Arbortext Publishing Engine
Metadata Date                   : 2016:01:25 19:56:30+08:00
Producer                        : PDFlib+PDI 8.0.2p1 (Win32)
Format                          : application/pdf
Document ID                     : uuid:9f8fee4e-c3da-4b57-8860-5f7058439691
Instance ID                     : uuid:dff80845-8a2f-41e7-966e-ce0e67d48506
Page Layout                     : SinglePage
Page Count                      : 170
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PU5-TP00079A

Navigation menu