Wolf Steel W190-0090 Bluetooth Controller User Manual eFire App 04 indd

Wolf Steel Ltd. Bluetooth Controller eFire App 04 indd

user manual

Refer to appliance Installation and Operating Instructions to set up replace and Bluetooth module. Download the eFIRE Controller app from the Google Play Store or iOS App Store according to your mobile device’s preferred operating system. Turn the appliance and Bluetooth module on and pair the Napoleon Bluetooth module with your mobile device.THEeFIRE CONTROLLER APP1. Download the eFIRE Con-troller app from your mobile platform app store.2. Turn on your fi rebox.3. Turn on your mobile app.4. Establish and verify theconnection to the fi rebox.5. Activate the app.6. Tap ‘Control Your Fireplace’.11. From the eFIRE controller screen, tap the ‘Information’ icon located in the upper right hand corner to view information about the ap-plication version, Bluetooth fi rmware version and MCU fi rmware version of the eFIRE Controller application.8. From this screen, you can control the fi replace power, fl ame height, blower speed, lights, lights cycle, colour, ember bed and in-app timer.9. Tap the ‘Lights’ icon to ON to customize the color dis-played from the colour wheel pop-up.10. From the eFIRE controller screen, tap the ‘Settings’ icon across from the ‘Power’ icon to access this page.7. Tap on the desired fi replace under ‘Select Fire Place’.NOTE: ‘Refresh’ icon?W###-### / 24.11.15PRINTED IN CANADA© WOLF STEEL LTD.Press Refresh if you do notfind your device.You will have get moreinformation or support ofthe product from the officialweb by clicking on the link.W190-0090
W###-### / 24.11.15PRINTED IN CANADA© WOLF STEEL LTD.ON/OFFThis button powers the replace control board. Set-ting this button to the ON position will automatically set the ame height to 6 and blower speed to 0. It does not have any effect on the LED light controller.FLAME HEIGHTThis 6 ‘position’ slider bar powers the height of the ame from 1 through 6. If the slider bar is adjusted while the replace is off, it will have no effect on the state of the replace. USING THEeFIRE CONTROLLER APPBLOWER SPEEDThis 7 ‘position’ slider bar powers the speed of the blower from 0 through 6. When the replace is turned on, the blower speed is automatically set to 0. If the slider bar is adjusted while the replace is off, it will have no effect on the state of the replace. LIGHTS ON/OFFThis button controls the state of the LED controller. When the replace is turned on, this will automatically set the lights to their previous mode. If there is no previous mode, lights will default to white. It does not have any effect on the replace controller.COLOUR INDICATORThis square button indicates the colour selected by the colour wheel and intensity scale. Pressing this button opens up both the colour wheel and the intensity scale to customize your replace experience. It also also saves the last colour selected on the colour wheel.COLOUR WHEELThis touchscreen colour wheel commands the LED light controller to display the colour selected by the user. The feature will only operate if the LED light is in the ON position.COLOUR CYCLE & EMBER BEDThis button sends a command to the LED controller that automatically scans through the most vivid primary colours of the wheel. When this button is turned to OFF, the cycle will hold the current colour. The ember bed features a pre-displayed red and rotation colour rotation for enhanced realism.INTENSITY SCALEThis Intensity Scale is part of the colour wheel but allows the user to customize the brightness of the LED lights. The user is able to increase and decrease the brightness in real-time by sliding the Intensity Scale up and down.TIMERThe app displays a timer set by the user. The count-down is controlled by the Bluetooth module so that if the app is turned off or the connection is lost, the replace will still turn off when the timer expires. When the timer expires, the Bluetooth module turns off the ame, blower and LED lights.SETTINGSThe Settings menu controls the Bluetooth settings which allows the user to switch to another replace nearby or change replace ‘nicknames’ (max. 10 per app).W190-0090
FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC Statement:This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Navigation menu