Wolf Ct30G Users Manual

CT30G to the manual 25aef5a0-1d2a-b194-3135-e99483ac9ca7

: Wolf Wolf-Ct30G-Users-Manual-477503 wolf-ct30g-users-manual-477503 wolf pdf

Open the PDF directly: View PDF .
Page Count: 7

Download
Open PDF In Browser	View PDF

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
Two-tiered
control knobs

Small 9,200 Btu/hr
(2.7 kW) burners

Low-profile
continuous grates
Model CT30G

Illuminated
control panel

Medium 12,000 Btu/hr
(3.5 kW) burner

Seamless
drawn pan

The Wolf Model CT30G 30" (762) gas
cooktop is available in natural or LP gas,
with classic or platinum stainless steel
finish. The model number followed by
(-LP) denotes an LP gas model.

This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.

Large 15,000 Btu/hr
(4.4 kW) burner

Location of
rating plate

New features make cooking a greater pleasure than
ever. For instance, at higher settings the patented Dual
Stacked Burner design uses its upper-level burner for
maximum heat transfer. Merely turn down the illuminated knob and the lower-tier burners delivers finetuning control and True Simmer. This patented feature
allows you to have the slightest of flame and enjoy a
simmer with no boiling or scorching.
Available in your choice of classic or platinum stainless
steel finish.
The sealed burners and deep recess of the seamless
drawn pan area make clean up of any of those previously unsightly spills a snap.
A more powerful 15,000 Btu/hr (4.4 kW) burner is now
standard.
Let Wolf, the corporate companion and kitchen soul
mate of Sub-Zero, fuel your passion for cooking and
kitchen design.

Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07

1

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
F E AT U R E S

Available in natural and LP gas

Individual spark ignition system

Stainless steel top construction, available in
classic and platinum stainless steel finishes

True Simmer setting on all burners

Four dual-stacked, sealed burners with
automatic reignition on all settings
One large 15,000 Btu/hr (4.4 kW) sealed
burner with 800 Btu/hr (.2 kW) delivered at
simmer
One medium 12,000 Btu/hr (3.5 kW) sealed
burner with 800 Btu/hr (.2 kW) delivered at
simmer
Two small 9,200 Btu/hr (2.7 kW) sealed
burners with 300 Btu/hr (.1 kW) delivered at
simmer

Illuminated control panel with two-tiered
control knobs
Low-profile, cast iron continuous burner
grates with matte porcelain finish
Seamless drawn burner pan
CSA certified for US and Canada
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com

OVERALL DIMENSIONS

21"
(533)
OVERALL
DEPTH

30" (762)
OVERALL WIDTH

4" (102)

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

2

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
S P E C I F I C AT I O N S

Model CT30G

MODEL OPTIONS

Classic Stainless Steel

CT30G/S

Platinum Stainless Steel

CT30G/P

Natural gas models listed, for LP gas add
(-LP) to the model numbers.

V E N T I L AT I O N O P T I O N S

Overall Cooktop Width

30" (762)

Overall Cooktop Height

4" (102)

Overall Cooktop Depth

21" (533)

Burner Rating
One 15,000 Btu/hr (4.4 kW) burner with 800 Btu/hr
(.2 kW) delivered at simmer
One 12,000 Btu/hr (3.5 kW) burner with 800 Btu/hr
(.2 kW) delivered at simmer
Two 9,200 Btu/hr (2.7 kW) burners with 300 Btu/hr
(.1 kW) delivered at simmer
Recommended Cabinet Width

33" (838)

Minimum Cabinet Width

30" (762)

Minimum Cabinet Depth

22 3/4" (578)

30" (762) Cooktop hood or Pro
wall or wall chimney hood or liner

Minimum Height Clearance
Cooktop Cut-Out Width

29" (737)

30" (762) or 45" (1143) downdraft
ventilation system

Cooktop Cut-Out Depth

19 1/4" (489)

36" (914) Pro island hood
For additional information, refer to the
Cooktop or Pro Ventilation sections of our
website, wolfappliance.com.

Electrical Supply Requirements
Power Cord
Gas Rating

ACCESSORIES

One-piece wok grate and single
burner grate

Shipping Weight

4" (102)

120 V AC, 60 Hz
15 amp circuit
6' (1.8 m) power cord
with grounded plug
45,400 Btu/hr (13.3 kW)
50 lbs (23 kg)

Specifications are subject to change without notice.

Filler strip
High altitude conversion kit
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
I N S TA L L AT I O N S P E C I F I C AT I O N S

33" (838) RECOMMENDED

13" max
(330)

2 1/2"**

19 1/4" (489)
(64) COOKTOP CUT-OUT
DEPTH

18"

9"* min (229)

(457)

CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)

2 1/2" min
(64)

30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP

CABINET WIDTH
30" min (762)

29" (737) COOKTOP
CUT-OUT WIDTH

4" (102)
3 1/2" (89)
3 3/4" min
24" min
(610)

(95)

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

E

G

10"
(254)

30-INCH OVEN OPENING

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

29" (737)
COOKTOP CUT-OUT WIDTH

19 1/4" (489)
COOKTOP
CUT-OUT DEPTH

2 1/2" min
(64)

FRONT OF COUNTERTOP

DIMENSIONS

Recommended Cabinet Width

33" (838)

Minimum Cabinet Depth

22 3/4" (578)

Cooktop Cut-Out Width

29" (737)

Cooktop Cut-Out Depth

19 1/4" (489)

Location of Electrical and Gas Supply

Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
I N S TA L L AT I O N N OT E S

Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
Wolf recommends using a 33" (838) wide
cabinet with the 30" (762) gas cooktop.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
ventilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf 30" (762) gas cooktop requires a
separate 120 V AC, 60 Hz power supply. The
service should have its own 15 amp circuit
breaker and a grounded 3-prong receptacle
should be located within the reach of the
6' (1.8 m) power cord. Locate electrical within
the shaded area shown in the illustration on
page 4.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Wolf gas cooktops are designed to operate
on natural gas at 5" (12.5 mb) WC (water
column) pressure or LP gas at 10" (25 mb) WC
pressure. The minimum line pressure for natural
gas is 7" (17.5 mb) WC and 11" (27.4 mb) WC
for LP gas. The maximum gas supply pressure
to the regulator should never exceed 14"
(34.9 mb) WC; .5 psi (3.5 kPa). It is supplied
with a 1/2" NPT male gas connection at the
right rear bottom corner of the cooktop. The
male connector exits the unit straight down and
you are supplied with a regulator with two
female connectors.
You must follow all National Electrical Code
and gas regulations. In addition, be aware of
local codes and ordinances when installing your
services.

Dimensions in parentheses are in
millimeters unless otherwise specified.

Wolf gas cooktops using natural gas
function up to an altitude of 8,000' (2438 m)
without any adjustment. Natural gas installations from 8,000' (2438 m) to 10,000' (3048 m)
need the high altitude conversion kit. LP gas
installations will operate up to 10,000' (3048 m)
without adjustment.
When a gas cooktop is installed above
cabinets, placement of the electrical and gas
supply is not critical. A grounded outlet needs
to be placed within 4' (1.2 m) of the right rear
of the cooktop.
A Wolf built-in single oven may be installed
below this cooktop. For this installation, the
electrical and gas supply for the cooktop should
be installed in the adjacent cabinet. Refer to
page 6 for specifications. Be aware of the
depth of the cooktop when planning for this
installation.
IMPORTANT NOTE: When a built-in oven is
installed below the cooktop, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply be
placed in an adjacent cabinet within reach of
the conduit.
IMPORTANT NOTE: Wolf gas cooktops are
designed and agency approved for installation
with Wolf built-in ovens only.
When multiple cooktop units are installed
side by side, refer to the countertop cut-out
dimensions on page 7.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.

This cooktop is intended for indoor use only.

5

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
I N S T A L L A T I O N W I T H B U I L T- I N O V E N

The Wolf 30" (762) gas cooktop may be installed
above a 30" (762) L Series or E Series built-in
single oven. Refer to the illustration below for
specifications.
IMPORTANT NOTE: When a built-in oven is
installed below the cooktop, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply for the
oven and the electrical and gas supply for the
cooktop be located in the adjacent right side
cabinet. A 2" (51) diameter hole to route the
conduit through cabinetry will be required.

Wolf recommends using a 33" (838) wide
cabinet for this installation. A minimum 24"
(610) of usable cabinet depth is required. The
cabinet base must be able to support 250 lbs
(113 kg).
For additional specifications, refer to the built-in
ovens section of our website, wolfappliance.com.

33" (838) RECOMMENDED

13" max
(330)

2 1/2"**

19 1/4" (489)
(64) COOKTOP CUT-OUT
DEPTH

18"

9"* min (229)

(457)

CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)

2 1/2" min
(64)

30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP

CABINET WIDTH
30" min (762)

29" (737) COOKTOP
CUT-OUT WIDTH

3 3/4" min (95)

4" (102)
G

IMPORTANT NOTE: Wolf gas cooktops are
designed and agency approved for installation
with Wolf built-in ovens only.

E

5"

31/2" (89)

10" (254)
COOKTOP
GAS SUPPLY AND
ELECTRICAL LOCATION
IN ADJACENT RIGHT
SIDE CABINET

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

27 3/16"
(691)

E

E

(127)
OVEN ELECTRICAL
4"
LOCATION WITHIN
(102)
OPENING APPLIES
ONLY TO CABINETS
DEEPER THAN 24" (610)

28 1/2" (724)
OVEN OPENING WIDTH

24" min (610)
4 3/4" min (121)
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
Unless you are using cabinets deeper than 24" (610), the electrical supply for the oven and the gas and electrical supply for the cooktop should
be located in the adjacent right side cabinet as shown.

Installation of a 30" (762) gas cooktop above a 30" (762) L Series or E Series single oven.

Dimensions in parentheses are in
millimeters unless otherwise specified.

6

Planning Information

30" (762) Gas Cooktop
MODEL CT30G
M U LT I P L E C O O K T O P I N S TA L L AT I O N

With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 1 1/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illustration below for countertop cut-out dimensions
for installation of multiple cooktop units.

IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
IMPORTANT NOTE: Review specifications for
each specific integrated module for installation
requirements and limitations. Refer to the
integrated modules section of our website,
wolfappliance.com.

When two or more cooktops or modules are
installed together, an accessory filler strip is
recommended. Refer to Accessories on page 3.

593/4" (1518) FOUR MODULES WIDTH OR
591/2" (1511) 30" COOKTOP AND TWO MODULES OR
501/4" (1276) 36" COOKTOP AND ONE MODULE
441/2" (1130) THREE MODULES WIDTH OR
441/4" (1124) 30" COOKTOP AND ONE MODULE
291/4" (743)
TWO MODULES WIDTH

21/2"min
(64)

14"

191/4"

(356)
CUT-OUT
WIDTH

(489)
CUT-OUT
DEPTH

FRONT OF COUNTERTOP

Countertop cut-out dimensions for installation of multiple cooktop units.

Dimensions in parentheses are in
millimeters unless otherwise specified.

7



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 7
X Press Private                 : %%DocumentProcessColors: Black.%%DocumentCustomColors: (Wolf Red).%%CMYKCustomColor: .275 .922 .937 .149 (Wolf Red).%%EndComments
Producer                        : QuarkXPress(tm) 6.52
Create Date                     : 2007:08:27 15:12:45
Creator                         : QuarkXPress(tm) 6.52

EXIF Metadata provided by EXIF.tools