Wolf Ct36I S Users Manual

CT36IS to the manual fa2e0eb2-fb44-6544-85db-39c70ad9e391

: Wolf Wolf-Ct36I-S-Users-Manual-477885 wolf-ct36i-s-users-manual-477885 wolf pdf

Open the PDF directly: View PDF .
Page Count: 7

Download
Open PDF In Browser	View PDF

Planning Information

New 36" (914) Induction Cooktop

— Available October 2007

MODEL CT36I/S
Five induction
elements

Melt setting

Electronic touch
controls

Countdown
timer

Universal
OFF key
Model CT36I/S

H
HIG
OFF

ON

R
OWE
HI-P

OFF

SIM

CLE
AR

H
HIG
ON
OWER
HI-P

O

OFF
SIM

H
HIG

H
HIG

ON
OFF

ON
OFF

Hot-surface
indicator light

MELT

MELT

SIM

H
HIG
ON
OFF POWER
HI-

Lock key

Melt setting

Classic stainless
steel trim finish

The Wolf Model CT36I/S 36" (914)
induction cooktop is available with classic
stainless steel trim finish.

Location of rating
plate

True Simmer on
all elements

I

nduction cooking has been used in Europe for decades
by professionals and homeowners demanding the best
in performance.
In induction cooking, the electricity flows through a coil
to produce a magnetic field under the ceramic cooktop.
When a cast iron or magnetic stainless steel pan is
placed on the ceramic glass surface, currents are
induced in the cooking utensil and instant heat is generated due to the resistance of the pan. Induction only
works with cooking vessels made of magnetic materials, such as cast iron and magnetic stainless steel (it
will not work with aluminum or copper pots). To test the
cookware, a magnet must stick to the bottom of the
vessel in order to function.
Induction cooking is so efficient that it out-performs gas
and electric cooktops. There is no wasted heat because
energy is supplied directly to the cooking vessel, so
nearly 90 percent of the energy gets used to cook.
You can keep sauces and chocolates melted at 50 watts
of power, or with the touch of a finger, activate the
Hi-Power boost feature and boil water in nearly half the
time you normally do.
The new induction cooktops will be available in October
2007.

Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07

1

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
F E AT U R E S

Classic stainless steel trim finish
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and
heat
Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface
Five high-efficiency induction elements
deliver power and control
Maximum element power: 3000 W with
4000 W boost, (2) 1800 W with 3000 W
boost and (2) 1200 W
True Simmer setting on three elements
Melt setting on two elements

Hi-Power mode boosts power on 1800 W
elements by diverting power from adjacent
element—4000 W element does not divert
power from adjacent element for boost
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume
Hot-surface indicator light in control panel
Lock mode—cooktop will be locked so that
no elements can be turned on
Universal OFF turns all elements off

Cookware sensing—elements will not be
energized without an induction-compatible
pan on the cooktop surface

Countdown timer with 1 to 99 minute range
CSA certified for US and Canada
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com

OVERALL DIMENSIONS

21"
(533)
OVERALL
DEPTH

36" (914)
OVERALL WIDTH

4 1/2" (114)

3 1/2" (89)
TERMINAL BOX

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

2

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
S P E C I F I C AT I O N S

Model CT36I/S

Overall Cooktop Width

36" (914)

Overall Cooktop Height

3 1/2" (89)

Overall Cooktop Depth

21" (533)

Element Maximum Power

V E N T I L AT I O N O P T I O N S

36" (914) Cooktop hood or Pro
wall or wall chimney hood or liner
36" (914) downdraft ventilation
system
42" (1067) Cooktop or Pro island
hood
For additional information, refer to the
Cooktop or Pro Ventilation sections of our
website, wolfappliance.com.

ACCESSORIES

Maximum Power Output

10,200 W

Element Diameters
(2)

5 1/2" (140), 6 3/4" (171),
3
8 /4" (220) and 11" (280)

Recommended Cabinet Width

39" (991)

Minimum Cabinet Width

36" (914)

Minimum Cabinet Depth

22 3/4" (578)
4 1/2" (114)

Minimum Height Clearance*
Cooktop Cut-Out Width

34 3/8" (873)

Cooktop Cut-Out Depth

19 1/4" (489)

Electrical Supply Requirements

Filler strip
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.

(2) 1200 W
(2) 1800 W with 3000 W boost
3000 W with 4000 W boost

Conduit
Electrical Rating
Shipping Weight

240/208 V AC
50/60 Hz, 50 amp circuit
4 ft (1.2 m) flexible 3-wire
10.2 kW at 240 V
8.9 kW at 208 V
70 lbs (32 kg)

*Minimum 6" (152) clearance is required between countertop and
any combustible surface directly below the cooktop.
Specifications are subject to change without notice.

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
I N S TA L L AT I O N S P E C I F I C AT I O N S

13" max
(330)

2"** 19 1/4" (489)
(51) COOKTOP CUT-OUT
DEPTH

18"

2"* min (51)

(457)

CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)

2 1/2" min
(64)

39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)

30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP

34 3/8" (873)
COOKTOP CUT-OUT WIDTH
4 1/2" (114)
3 3/4" min (95)

24" min
(610)

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

3 1/2" (89)

E
10"
(254)

36-INCH OVEN OPENING

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from
rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

34 3/8" (873)
COOKTOP CUT-OUT WIDTH

19 1/4" (489)
COOKTOP
CUT-OUT DEPTH

2 1/2" min
(64)

FRONT OF COUNTERTOP

DIMENSIONS

Recommended Cabinet Width

39" (991)

Minimum Cabinet Depth

22 3/4" (578)

Cooktop Cut-Out Width

34 3/8" (873)

Cooktop Cut-Out Depth

19 1/4" (489)

Location of Electrical

Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
I N S TA L L AT I O N N OT E S

Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
Wolf recommends using 39" (991) cabinets
with the 36" (914) induction cooktop.
Clearance is required for the terminal block
located on the bottom of the cooktop in the
right rear corner.
IMPORTANT NOTE: A minimum height clearance of 6" (152) is required between the countertop and any combustible surface directly
below the cooktop. This includes upper edges
of drawers located directly below unit. If a shelf
is installed below the unit, a 1" (25) gap at the
rear of the cabinet shelf is necessary to allow
for proper ventilation. Failure to do so could
result in decreased performance or product
damage.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
ventilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf 36" (914) induction cooktop
requires a separate, grounded 3-wire 240/208 V
AC, 50/60 Hz, 50 amp service with its own
circuit breaker. It has a 4' (1.2 m) flexible 3-wire
conduit for connection at the electrical supply.
Locate electrical within the shaded area shown
in the Installation illustration on page 4.

Dimensions in parentheses are in
millimeters unless otherwise specified.

A Wolf built-in single oven may be installed
below this cooktop. For this installation, the
electrical supply for the cooktop should be
installed in the adjacent cabinet. Refer to the
illustration on page 6 for specifications. Be
aware of the depth of the cooktop when
planning for this installation.
IMPORTANT NOTE: When a built-in oven is
installed below the cooktop, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply be
placed in an adjacent cabinet within reach of
the conduit.
IMPORTANT NOTE: Wolf induction cooktops
are designed and agency approved for installation with Wolf built-in ovens only.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
If the 36" (914) induction cooktop is to be
used with any combination of additional
cooktop units or modules with a filler strip, the
cut-out width increases to 35" (889). When
multiple cooktops or modules are installed side
by side, refer to the countertop cut-out dimensions on page 7.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.

This cooktop is intended for indoor use only.

5

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
I N S T A L L A T I O N W I T H B U I L T- I N O V E N

The Wolf 36" (914) induction cooktop may be
installed above a 36" (914) L Series built-in
single oven. Refer to the illustration below for
specifications.
IMPORTANT NOTE: When a oven is installed
below the cooktop, unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply for the oven
and the electrical supply for the cooktop be
located in the adjacent right side cabinet. A 2"
(51) diameter hole to route the conduit through
cabinetry will be required.
IMPORTANT NOTE: Wolf electric cooktops are
designed and agency approved for installation
with Wolf built-in ovens only.

13" max
(330)

19 1/4" (489)

2"**

(51) COOKTOP CUT-OUT
DEPTH

18"

2"* min (51)

(457)

CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)

2 1/2" min
(64)

4 1/2" (114)

Wolf recommends using 39" (991) wide cabinets
for this installation. A minimum 24" (610) of
usable cabinet depth is required. The cabinet
base must be able to support 250 lbs (113 kg).
It is recommended that the rough opening for
the oven be 7 3/4" (197) from the floor to ease
use of the oven door.
The Wolf 36" (914) induction cooktop may also
be installed above a Wolf 30" (762) L Series or
E Series single oven.
For electrical requirements and additional
specifications, refer to Built-In Ovens section of
our website, wolfappliance.com.

39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)

30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP

34 3/8" (873)
COOKTOP CUT-OUT WIDTH
3 3/4"min (95)
5"

3 1/2" (89)

E
10"

(254) COOKTOP
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

24" min (610)

24 1/16"
(611)

OVEN ELECTRICAL
LOCATION WITHIN
OPENING APPLIES ONLY
TO CABINETS DEEPER
THAN 24" (610)

(127)

E

E

4"
(102)

34 1/2" (876)
OVEN OPENING WIDTH
7 3/4" (197) rec
4 3/4" (121) min

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from
rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop. Unless you are using cabinets deeper than 24" (610), the
electrical supply for the oven and the electrical supply for the cooktop should be located in the adjacent right side cabinet as shown.

Installation of a 36" (914) induction cooktop above a 36" (914) L Series single oven.

Dimensions in parentheses are in
millimeters unless otherwise specified.

6

Planning Information

New 36" (914) Induction Cooktop
MODEL CT36I/S
M U LT I P L E C O O K T O P I N S TA L L AT I O N

With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 1 1/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illustration below for countertop cut-out dimensions
for installation of multiple cooktop units.

IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
IMPORTANT NOTE: Review specifications for
each specific integrated module for installation
requirements and limitations. Refer to the
integrated modules section of our website,
wolfappliance.com.

When two or more cooktops or modules are
installed together, an accessory filler strip is
recommended. Refer to Accessories on page 3.

593/4" (1518) FOUR MODULES WIDTH OR
591/2" (1511) 30" COOKTOP AND TWO MODULES OR
501/4" (1276) 36" COOKTOP AND ONE MODULE
441/2" (1130) THREE MODULES WIDTH OR
441/4" (1124) 30" COOKTOP AND ONE MODULE
291/4" (743)
TWO MODULES WIDTH

21/2"min
(64)

14"

191/4"

(356)
CUT-OUT
WIDTH

(489)
CUT-OUT
DEPTH

FRONT OF COUNTERTOP

Countertop cut-out dimensions for installation of multiple cooktop units.

Dimensions in parentheses are in
millimeters unless otherwise specified.

7



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 7
X Press Private                 : %%DocumentProcessColors: Black.%%DocumentCustomColors: (Wolf Red).%%CMYKCustomColor: .275 .922 .937 .149 (Wolf Red).%%EndComments
Producer                        : QuarkXPress(tm) 6.52
Create Date                     : 2007:08:28 11:08:12
Creator                         : QuarkXPress(tm) 6.52

EXIF Metadata provided by EXIF.tools