Wolf Ct36I S Users Manual

CT36IS to the manual fa2e0eb2-fb44-6544-85db-39c70ad9e391

: Wolf Wolf-Ct36I-S-Users-Manual-477885 wolf-ct36i-s-users-manual-477885 wolf pdf

Open the PDF directly: View PDF .
Page Count: 7

Planning Information

New 36" (914) Induction Cooktop

—Available October 2007

MODEL CT36I/S

1

Dimensions in parentheses are in

millimeters unless otherwise specified.

9/07

Model CT36I/S

Induction cooking has been used in Europe for decades

byprofessionals and homeownersdemanding the best

in performance.

In induction cooking, the electricity flows through a coil

to produce a magnetic field under the ceramic cooktop.

When a cast iron or magnetic stainless steel pan is

placed on the ceramic glass surface, currents are

induced in the cooking utensil and instant heat is gener-

ated due to the resistance of the pan. Induction only

works with cooking vessels made of magnetic materi-

als, such as cast iron and magnetic stainless steel (it

will not work with aluminum or copper pots). Totest the

cookware, a magnet must stick to the bottom of the

vessel in order to function.

Induction cooking is so efficient that it out-performs gas

and electric cooktops. There is no wasted heat because

energy is supplied directly to the cooking vessel, so

nearly 90 percent of the energy gets used to cook.

You can keep sauces and chocolates melted at 50 watts

of power,or with the touch of a finger, activate the

Hi-Power boost feature and boil water in nearly half the

time you normally do.

The new induction cooktops will be available in October

2007.

The Wolf Model CT36I/S 36" (914)

induction cooktop is available with classic

stainless steel trim finish.

MELTHIGH

OFF ON

MELTHIGH

OFFON

OFFON

SIMHIGH

HI-POWER

OFFON

SIM HIGH

HI-POWER

HI-POWER

HIGH

SIMOFFON

CLEAR

OFF

O

Electronic touch

controls

Five induction

elements

Classic stainless

steel trim finish

Hot-surface

indicator light

Universal

OFF key

Melt setting

Location of rating

plate

Countdown

timer

Lock key

True Simmer on

all elements

Melt setting

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

2

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

TERMINAL BOX

31/2"(89) 41/2"(114)

OVERALL DIMENSIONS

FEATURES

Classic stainless steel trim finish

Easy-to-clean black ceramic glass surface is

resistant to scratching, staining, impact and

heat

Induction elements heat cookware, not the

glass, for a cooler, safer cooking surface

Five high-efficiency induction elements

deliver power and control

Maximum element power: 3000 W with

4000 W boost, (2) 1800 W with 3000 W

boost and (2) 1200 W

True Simmer setting on three elements

Melt setting on two elements

Cookware sensing—elements will not be

energized without an induction-compatible

pan on the cooktop surface

Hi-Power mode boosts power on 1800 W

elements by diverting power from adjacent

element—4000 W element does not divert

power from adjacent element for boost

Temperature limiter to ensure that safe

operating temperature of ceramic glass is

never exceeded

Illuminated touch controls with graduated

control lighting and adjustable sound

frequency and volume

Hot-surface indicator light in control panel

Lock mode—cooktop will be locked so that

no elements can be turned on

Universal OFF turns all elements off

Countdown timer with 1 to 99 minute range

CSA certified for US and Canada

Two and five year residential warranty—

exclusions apply; warranty information can

be found on our website, wolfappliance.com

Dimensions in parentheses are in

millimeters unless otherwise specified.

Unit dimensions may vary by ± 1/8"(3).

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

Dimensions in parentheses are in

millimeters unless otherwise specified. 3

SPECIFICATIONS

Overall Cooktop Width 36" (914)

Overall Cooktop Height 3 1/2"(89)

Overall Cooktop Depth 21" (533)

Element Maximum Power (2) 1200 W

(2) 1800 W with 3000 W boost

3000 W with 4000 W boost

Maximum Power Output 10,200 W

Element Diameters 5 1/2" (140), 6 3/4" (171),

(2) 8 3/4" (220) and 11" (280)

Recommended Cabinet Width 39" (991)

Minimum Cabinet Width 36" (914)

Minimum Cabinet Depth 22 3/4"(578)

Minimum Height Clearance* 41/2"(114)

Cooktop Cut-Out Width 34 3/8"(873)

Cooktop Cut-Out Depth 19 1/4"(489)

Electrical Supply Requirements 240/208 V AC

50/60 Hz, 50 amp circuit

Conduit 4 ft (1.2 m) flexible 3-wire

Electrical Rating 10.2 kW at 240 V

8.9 kW at 208 V

Shipping Weight 70 lbs (32 kg)

*Minimum 6" (152) clearance is required between countertop and

any combustible surface directly below the cooktop.

Specifications are subject to change without notice.

VENTILATION OPTIONS

36" (914) Cooktop hood or Pro

wall or wall chimney hood or liner

36" (914) downdraft ventilation

system

42" (1067) Cooktop or Pro island

hood

For additional information, refer to the

Cooktop or Pro Ventilation sections of our

website, wolfappliance.com.

ACCESSORIES

Filler strip

Accessories are available through your

Wolf dealer. To obtain local dealer

information, visit the Showroom Locator

section of our website,wolfappliance.com.

Model CT36I/S

Unit dimensions may vary by ± 1/8"(3).

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

Dimensions in parentheses are in

millimeters unless otherwise specified. 4

INSTALLATION SPECIFICATIONS

2"*min (51)

CUT-OUT TO

COMBUSTIBLE

MATERIALS

(BOTH SIDES)

18"

(457)

191/4"(489)

COOKTOP CUT-OUT

DEPTH

21/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

13" max

(330) 30" (762)

COUNTERTOP TO

COMBUSTIBLE

MATERIALS

ABOVE COOKTOP

24"min

(610)

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from

rear edge of cooktop cut-out to combustible materials up to 18" (457) abovecountertop.

343/8"(873)

COOKTOP CUT-OUT WIDTH

343/8"(873)

COOKTOP CUT-OUT WIDTH

39" (991)

RECOMMENDED CABINET WIDTH

36"min (914)

36-INCH OVEN OPENING

33/4"min (95)

21/2"min

(64)

FRONT OF COUNTERTOP

191/4"(489)

COOKTOP

CUT-OUT DEPTH

2"**

(51)

41/2"(114)

10"

(254)

31/2"(89) E

DIMENSIONS

Recommended Cabinet Width 39" (991)

Minimum Cabinet Depth 22 3/4"(578)

Cooktop Cut-Out Width 34 3/8"(873)

Cooktop Cut-Out Depth 191/4"(489)

Location of Electrical Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

Dimensions in parentheses are in

millimeters unless otherwise specified. 5

INSTALLATION NOTES

Refer to the illustrations and specifications

for overall dimensions, cut-out dimensions and

installation specifics.

Wolf recommends using 39" (991) cabinets

with the 36" (914) induction cooktop.

Clearance is required for the terminal block

located on the bottom of the cooktop in the

right rear corner.

IMPORTANT NOTE: Aminimum height clear-

ance of 6" (152) is required between the coun-

tertop and any combustible surface directly

below the cooktop. This includes upper edges

of drawers located directly below unit. If a shelf

is installed below the unit, a 1" (25) gap at the

rear of the cabinet shelf is necessary to allow

for proper ventilation. Failure to do so could

result in decreased performance or product

damage.

AWolf downdraft system, Cooktop or

Pro ventilation hood is recommended. When

installing a ventilation hood, refer to the specific

requirements of the hood for the minimum

dimension to countertop. Also refer to the

ventilation recommendation charts in the

cooktop or Proventilation sections of our

website, wolfappliance.com.

The Wolf 36" (914) induction cooktop

requires a separate, grounded 3-wire 240/208 V

AC, 50/60 Hz, 50 amp service with its own

circuit breaker. It has a 4' (1.2 m) flexible 3-wire

conduit for connection at the electrical supply.

Locate electrical within the shaded area shown

in the Installation illustration on page 4.

AWolf built-in single oven may be installed

below this cooktop. For this installation, the

electrical supply for the cooktop should be

installed in the adjacent cabinet. Refer to the

illustration on page 6 for specifications. Be

aware of the depth of the cooktop when

planning for this installation.

IMPORTANT NOTE: When a built-in oven is

installed below the cooktop, unless you are

using cabinets deeper than 24" (610), it is

recommended that the electrical supply be

placed in an adjacent cabinet within reach of

the conduit.

IMPORTANT NOTE: Wolf induction cooktops

are designed and agency approved for installa-

tion with Wolf built-in ovens only.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes

and ordinances when installing your service.

If the 36" (914) induction cooktop is to be

used with any combination of additional

cooktop units or modules with a filler strip, the

cut-out width increases to 35" (889). When

multiple cooktops or modules are installed side

byside,refer to the countertop cut-out dimen-

sions on page 7.

Refer to the installation instructions

shipped with each Wolf product for detailed

specifications.

This cooktop is intended for indoor use only.

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

Dimensions in parentheses are in

millimeters unless otherwise specified. 6

INSTALLATION WITH BUILT-IN OVEN

The Wolf 36" (914) induction cooktop may be

installed above a 36" (914) L Series built-in

single oven. Refer to the illustration below for

specifications.

IMPORTANT NOTE: When a oven is installed

below the cooktop, unless you are using

cabinets deeper than 24" (610), it is recom-

mended that the electrical supply for the oven

and the electrical supply for the cooktop be

located in the adjacent right side cabinet. A 2"

(51) diameter hole to route the conduit through

cabinetry will be required.

IMPORTANT NOTE: Wolf electric cooktops are

designed and agency approved for installation

with Wolf built-in ovens only.

Wolf recommends using 39" (991) wide cabinets

for this installation. A minimum 24" (610) of

usable cabinet depth is required. The cabinet

base must be able to support 250 lbs (113 kg).

It is recommended that the rough opening for

the oven be 7 3/4"(197) from the floor to ease

use of the oven door.

The Wolf 36" (914) induction cooktop may also

be installed above a Wolf 30" (762) L Series or

ESeries single oven.

For electrical requirements and additional

specifications, refer to Built-In Ovens section of

our website, wolfappliance.com.

2"*min (51)

CUT-OUT TO

COMBUSTIBLE

MATERIALS

(BOTH SIDES)

18"

(457)

191/4"(489)

COOKTOP CUT-OUT

DEPTH

21/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

13" max

(330) 30" (762)

COUNTERTOP TO

COMBUSTIBLE

MATERIALS

ABOVE COOKTOP

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) abovecountertop. **Minimum clearance from

rear edge of cooktop cut-out to combustible materials up to 18" (457) abovecountertop. Unless you are using cabinets deeper than 24" (610), the

electrical supply for the oven and the electrical supply for the cooktop should be located in the adjacent right side cabinet as shown.

343/8"(873)

COOKTOP CUT-OUT WIDTH

39" (991)

RECOMMENDED CABINET WIDTH

36"min (914)

24" min (610)

10"

(254)

31/2"(89)

E

COOKTOP

ELECTRICAL

LOCATION IN

ADJACENT RIGHT

SIDE CABINET

33/4"min (95)

73/4"(197) rec

43/4"(121) min

241/16"

(611)

E

5"

(127)

341/2"(876)

OVEN OPENING WIDTH

4"

(102)

OVEN ELECTRICAL

LOCATION WITHIN

OPENING APPLIES ONLY

TO CABINETS DEEPER

THAN 24"(610)

E

41/2"(114)

2"**

(51)

Installation of a 36" (914) induction cooktop above a 36" (914) L Series single oven.

Planning Information

New 36" (914) Induction Cooktop

MODEL CT36I/S

Dimensions in parentheses are in

millimeters unless otherwise specified. 7

MULTIPLE COOKTOP INSTALLATION

With Wolf's integrated modules, you have the

ultimate in customization. You can create your

own design by mixing and matching the various

components within this system. And when you

couple these modules with other cooktops

within the Wolf inventory you and your client will

truly understand freedom of choice.

Some Wolf integrated modules can be installed

together or with a 30" (762) or 36" (914)

cooktop. When multiple units are installed side

by side, the cut-out dimensions that are shown

in the illustration are derived by adding 11/4"(32)

additional space for each additional unit, to give

you your total cut-out width. Refer to the illus-

tration below for countertop cut-out dimensions

for installation of multiple cooktop units.

When two or more cooktops or modules are

installed together, an accessory filler strip is

recommended. Refer to Accessories on page 3.

Countertop cut-out dimensions for installation of multiple cooktop units.

IMPORTANT NOTE: When multiple cooktops

and/or modules are installed side by side, each

unit must have its own separate recommended

electrical circuit. When multiple gas cooktops

and/or modules are installed next to one

another, they can receive their gas supply from a

common line. However, each unit must have its

own regulator installed between the mainline

and the cooktop or module.

IMPORTANT NOTE: Review specifications for

each specific integrated module for installation

requirements and limitations. Refer to the

integrated modules section of our website,

wolfappliance.com.

21/2"min

(64)

FRONT OF COUNTERTOP

191/4"

(489)

CUT-OUT

DEPTH

291/4"(743)

TWO MODULES WIDTH

441/2"(1130) THREE MODULES WIDTH OR

441/4"(1124) 30" COOKTOP AND ONE MODULE

593/4"(1518) FOUR MODULES WIDTH OR

591/2"(1511) 30" COOKTOP AND TWO MODULES OR

501/4"(1276) 36" COOKTOP AND ONE MODULE

14"

(356)

CUT-OUT

WIDTH