Wonde Proud Technology WCD100 BLUETOOTH GPS CAMERA DETECT User Manual GPS BT74S User s Guide

Wonde Proud Technology Co., Ltd. BLUETOOTH GPS CAMERA DETECT GPS BT74S User s Guide

USERS MANUAL

*** USER’S MANUAL ***FCC ID : SRKWCD100
The Federal Communication Commission StatementThis equipment has been tested and found to comply with the limits for a Class B Digital Device,pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: --Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.-Consult the dealer or an experienced Radio/TV technician for help.Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change or modifications not expressly approved by the party responsible for compliance could void yourauthority to operate the equipment.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERECE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.1. This device may not cause harmful interference and2. This device must accept any interference received, including interference that may causeundesired operation.
Sample User Guild Device Power LED status : 1. Idle mode (Power LED turn off): Charge : Power LED turn on Finish charge : Power LED turn off 2. Normal mode (Power LED glitter): Charge : Power LED turn on Finish charge : Power LED glitter 3. USB(G-Mouse) mode : Charge : Power LED turn on Finish charge : "GPS/BT" Device Bluetooth LED status : 1. On Idle Mode : Bluetooth LED turn off 2. On Normal Mode , "Power Button" choose "GPS/BT" mode : Bluetooth LED glitter 3. On G-Mouse Mode : Bluetooth LED turn off Device GPS LED status : 1. On Idle Mode : GPS LED turn off 2. On Normal Mode , when GPS signal active : GPS LED glitter 3. On G-Mouse Mode , when GPS signal active : GPS LED glitter Device Button control : 1. On Idle Mode: "Power Button" Short Press : Power on Another Button : No function 2. On Normal Mode: "Power Button" Short Press : "GPS/BT" or "GPS Only" mode switch "Power Button" Long Press : Power off "Volume Up Button" Short Press : Volume up "Volume Down Button" Short Press : Volume down
"Volume Up Button" Long Press : Add one user ata "Volume Down Button" Long Press : Delete latest user data Another Button : No function 3. On G-Mouse Mode: (Fixed GPS Only mode) "Volume Up Button" Short Press : Volume up "Volume Down Button" Short Press : Volume down "Volume Up Button" Long Press : Add one user data "Volume Down Button" Long Press : Delete latest user data Another Button : No function

Navigation menu