Wonde Proud Technology WCD100 BLUETOOTH GPS CAMERA DETECT User Manual GPS BT74S User s Guide
Wonde Proud Technology Co., Ltd. BLUETOOTH GPS CAMERA DETECT GPS BT74S User s Guide
USERS MANUAL
*** USER’S MANUAL ***
FCC ID : SRKWCD100
The Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of more of the following
measures: -
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced Radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change
or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERECE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Sample User Guild
Device Power LED status :
1. Idle mode (Power LED turn off):
Charge : Power LED turn on
Finish charge : Power LED turn off
2. Normal mode (Power LED glitter):
Charge : Power LED turn on
Finish charge : Power LED glitter
3. USB(G-Mouse) mode :
Charge : Power LED turn on
Finish charge : "GPS/BT"
Device Bluetooth LED status :
1. On Idle Mode : Bluetooth LED turn off
2. On Normal Mode , "Power Button" choose "GPS/BT" mode : Bluetooth LED glitter
3. On G-Mouse Mode : Bluetooth LED turn off
Device GPS LED status :
1. On Idle Mode : GPS LED turn off
2. On Normal Mode , when GPS signal active : GPS LED glitter
3. On G-Mouse Mode , when GPS signal active : GPS LED glitter
Device Button control :
1. On Idle Mode:
"Power Button" Short Press : Power on
Another Button : No function
2. On Normal Mode:
"Power Button" Short Press : "GPS/BT" or "GPS Only" mode switch
"Power Button" Long Press : Power off
"Volume Up Button" Short Press : Volume up
"Volume Down Button" Short Press : Volume down
"Volume Up Button" Long Press : Add one user ata
"Volume Down Button" Long Press : Delete latest user data
Another Button : No function
3. On G-Mouse Mode:
(Fixed GPS Only mode)
"Volume Up Button" Short Press : Volume up
"Volume Down Button" Short Press : Volume down
"Volume Up Button" Long Press : Add one user data
"Volume Down Button" Long Press : Delete latest user data
Another Button : No function