Wonde Proud Technology WPSPT100 GSM/GPRS SMART PERSON TRACKING User Manual PT100SampleGuide

Wonde Proud Technology Co., Ltd. GSM/GPRS SMART PERSON TRACKING PT100SampleGuide

Contents

USERS MANUAL

*** USER’S MANUAL ***FCC ID : SRKWPSPT100
FCC label requirement Please note : (1) The device must be designed for mobile or fixed operation only. (portable is not permitted and requires separate approval) (2) The device bear a label with FCC ID:SRKWPSPT100 attached on the bottom of the device and a second label with FCC ID:UDV-0606020060002 attached on RF module inside the device . (3) FCC label shown as : FCC ID: SRKWPSPT100 Contains FCC ID:UDV-0606020060002
FCC RF exposure requirement To allow compliance with RF exposure requirement for the device which maximum output power at antenna input terminal: (a) For GSM 850MHz / GSM 900MHz band is 33dBm (= 2W ) , the maximum antenna gain with cable is 0.5 dBi . (b) For DCS1800MHz / PCS1900MHz band is 30dBm (= 1W) ,the maximum antenna gain with cable is 1.0 dBi . The device must be installed to provide a separation distance of at least 20cm from all persons’head or body ,and must not be co-located or operating in conjunction with any other antenna or transmitter .
1. Normal Mode : A. Normal : Power Button Long Press : Power OFF. Power Button Short Press : Switch To GPS Info. Mode. Button 1 Long Press : Parking ON/OFF Button 2 Long Press : Dial Emergency Phone 1 (Set Up By Utility). Button 3 Long Press : Dial Emergency Phone 2 (Set Up By Utility). Button 4 Long Press : Dial Emergency Phone 3 (Set Up By Utility). Button 5 Long Press : Send Emergency SMS (Set Up By Utility). System Modes
B. When Ring In : Power Button Long Press : Power OFF. Power Button Short Press : Pick Up Phone. Button 1~4 Short/Long Press: Pick Up Phone. Button 5 Short/Long Press: Hand Up Phone.
C. When Talking : Power Button Long Press : Power OFF. Button 3 Short Press: Volume Up. Button 4 Short Press: Volume Down. Button 5 Short Press: Hand Up Phone.
C. When Parking Enable: Power Button Long Press : Power OFF. Button 3 Short Press: Volume Up. Button 4 Short Press: Volume Down. Button 5 Short Press: Hand Up Phone.
2. GPS Information Mode : No Fix : Fix : A. Normal Power Button Long Press : Power OFF. Power Button Short Press : Switch To Dial Phone Mode. Button 2 Long Press : Dial Emergency Phone 1 (Set Up By Utility). Button 3 Long Press : Dial Emergency Phone 2 (Set Up By Utility). Button 4 Long Press : Dial Emergency Phone 3 (Set Up By Utility). B. When Ring In : Power Button Long Press : Power OFF. Power Button Short Press : Pick Up Phone. Button 1~4 Short/Long Press: Pick Up Phone. Button 5 Short/Long Press: Hand Up Phone. 3. Dial Phone Mode :
Power Button Long Press : Power OFF. Power Button Short Press : Switch To Normal Mode. Button 1 Short Press : Select Current Number To Dial List. Button 2 Short Press : Clear Current Number To Dial List. Button 3 Short Press : Right Shift Number . Button 4 Short Press : Lift Shift Number . Button 5 Long Press : Dial Out. Note : System will go back to normal mode after 10 sec without any button press
1. Unit Setting Unit ID : The identification number of the unit. The default unit ID is 1010000001. Pin Code : The PIN code of the GSM/GPRS SIM card. (Max. 4 digits) Sync. Timer : Synchronization message sending interval in seconds.(10 ~ 65535 seconds) 0: Only one sync message be transmited when the unit connected to the server. GPRS APN : GPRS Access Point Name. (Max. 35 characters) GPRS User Name : GPRS login user name (Max. 15 characters) GPRS Password : GPRS login password (Max. 15 characters) Host Address : The base station static WAN IP/DNS address. (Max. 30 characters) Host Port : The base station application port number of the UDP/TCP Host DNS : DNS IP address. Utility Setting
1-1. Save Setting
2. Phone Setting
2-1. Save Setting
3 . Firmware Upgrade
3-1. Select Firmware file (*.BIN)
3-2. Check Checksum
3-3. Finish

Navigation menu