Wonders Technology DS1685 Home Speaker User Manual FH333054 DS 1685

Wonders Technology Co., Ltd. Home Speaker FH333054 DS 1685

user manual

Home SpeakerStatus indicatorsPackage contentProduct overview正反面印刷 SIZE：95 X 148NNProduct Type : Home speakerUnit dimension : 11.8x2.64x5.2 inchUnit weight : 3.46lbsOutput power :2 x 10 W | 12 W SubwooferDriver unit : 2.0 inch speaker x2 + 1.5 inch x3.5 inch passive radiator x 2Frequency response : 40Hz-20kHzWarranty: One-year limited PowerWonders Technology Co.,LtdEmail:Support@dossav.comFollow us on Facebook: Wonders Technology Co.,LtdEmail:Support@dossav.comFollow us on Facebook: Pairing the wireless speaker with your smart device1.Place your smart device and speaker no more than one meter away from each other .3.Set your smart device to “discover” the speaker . Upon powering on , a tone will be hear , the blue LED will start flashing, accompany by a 4.Enable Bluetooth on your device and choose DOSS SoundBox XL from the list.5.If paring is successful, the LED will change to steady blue and your device Mode NO. :DOSS SoundBox XLUser Manual Home speaker x 1Power adapter with power plug x 1 Φ3.5mm audio cable x 1User manual x 11 2 4 5 6 73 long press to turn the device ON/OFF.2.Mode switch:3.LED lights①②③④ : From ①-④ indicates for Bluetooth mode,AUX in 4.Volume control6.Play/Pause : 8.Power port :DC 12V 2.5A 9.LED charging lightCharging : steady red. Fully charge :steady green. 10.AUX in : 11.TF card : Use it for TF card (with music) playback. Support MP3,WAV,WMV 8 910 111.Use the power adapter to charge your speaker with the port DC 12V 2.5A, make sure that the power supply is within the standard as 100V-240V.2.Make sure that the speaker is fully charge before using it at the first. the LED will going to green .BluetoothProblemTF CardCannot Pair with Bluetooth devices seconds,then have a try to pair it againPlease select 'DOSS SoundBox XL'as the default playback deviceThe song cuts off during Maybe cause by the interference of charging, try to put it in another place and do not charge it during playLaptop prompts to install driverThis driver is not special for DOSS SoundBox XL,it’s for your laptop the computer or windowsPlease press the Play/Pause service for helpThe speaker do not play when the card is inserted,and jump directly back to Bluetooth modeCheck whether the card format is FAT or FAT32. If not, format it to FAT or FAT32.Check the song format. The speaker only supports MP3, WAV, WMVThe song cuts off during playbackThere may be a problem with the the same fileOutput power :2 x 10 W | 12 W SubwooferPower adapter(supplied)Model : DYS624-120250W-1/KInput : 100 - 240 V~, 50 / 60 Hz, 0.8 A MAXOutput : 12 V , 2500 mAhWireless/Networking Supported Bluetooth profiles : A2DP AVRCP,SPPWarningDo NOT drop ,hit or shake the device. Do NOT disassemble ,repair or modify the speaker by yourself.Do NOT use cleaning products that contain benzene,solvents or alcohol.Do NOT expose the speaker to excessive heat or direct sunlight Do NOT store the device in a place with humidity or dust.Do NOT place heavy objects on top of the speaker.Do NOT use near a microwave oven or wireless LAN products..5Indicator lights on the top①Flashing blue①Steady blue②Steady red③steady white④Flashing redSteady redSteady greenThe speaker has entered into the pairing mode and it is Indicates that the device is successfully pairedIndicates that mode switch to AUX in is successfullyIndicates that that mode switch to TF card is successfullyIndicates that the power is low FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu