Wonders Technology PS036 Bluetooth Speaker User Manual DS 1392

Wonders Technology Co., Ltd. Bluetooth Speaker DS 1392

Users manual

Instruction Manual Product View A1 A2 A1: Bluetooth button A2: Power button LED status and Modes Power on Blue LED flash blue slowly Pairing mode Blue LED flash blue quickly Paired Solid blue Pairing with another Xorb mini Bluetooth LED flash blue/green alternatively
Paired Master speaker display solid blue and green Passive speaker display green only Pairing and Connecting to your Xorb mini Bluetooth speaker 1.Hold and press power button 5s to turn on speaker, hold and press bluetooth button 3s to enter bluetooth mode, bluetooth LED flash blue quickly. 2.Go to Bluetooth settings on your music device and connect to “Xorb mini”. After connecting Bluetooth indicator LED will display solid blue. Note: If the Xorb mini is already connected to another Bluetooth device, disconnect that device before connecting. Short press bluetooth button to play/pause music. If listening to two Xorb mini, the operation as follows: 1.Hold and press power button 5s to turn on both speaker, then short press power button two times again to enter master/passive speaker pairing mode, bluetooth LED flash blue/green alternatively, after paired, bluetooth LED display solid green. 2.Hold and Press one of speaker bluetooth button 3s to enter bluetooth mode, bluetooth LED flash blue quickly. Short press bluetooth button to play/pause music. 3.Go to Bluetooth settings on your music device and connect to “Xorb mini”. After connecting the master speaker Bluetooth indicator LED will display solid blue and green, and passive speaker display solid green only. Note: If the Xorb mini is already connected to another Bluetooth device,
disconnect that device before connecting. Only the first time need to connect master and passive speaker, then master and passive speaker will remember each other and automatically connect with each other in future. FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following This device complies with part 15 of the FCC Rules. Operation is subject to the following must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu