Wonders Technology PS036 Bluetooth Speaker User Manual DS 1392
Wonders Technology Co., Ltd. Bluetooth Speaker DS 1392
Users manual
Instruction Manual
Product View
A1 A2
A1: Bluetooth button
A2: Power button
LED status and Modes
Power on Blue LED flash blue slowly
Pairing mode Blue LED flash blue quickly
Paired Solid blue
Pairing with another Xorb mini Bluetooth LED flash blue/green alternatively
Paired Master speaker display solid blue and green
Passive speaker display green only
Pairing and Connecting to your Xorb mini Bluetooth speaker
1.Hold and press power button 5s to turn on speaker, hold and press bluetooth button 3s
to enter bluetooth mode, bluetooth LED flash blue quickly.
2.Go to Bluetooth settings on your music device and connect to “Xorb mini”. After
connecting Bluetooth indicator LED will display solid blue.
Note: If the Xorb mini is already connected to another Bluetooth device,
disconnect that device before connecting.
Short press bluetooth button to play/pause music.
If listening to two Xorb mini, the operation as follows:
1.Hold and press power button 5s to turn on both speaker, then short press power button
two times again to enter master/passive speaker pairing mode, bluetooth LED flash
blue/green alternatively, after paired, bluetooth LED display solid green.
2.Hold and Press one of speaker bluetooth button 3s to enter bluetooth mode, bluetooth
LED flash blue quickly.
Short press bluetooth button to play/pause music.
3.Go to Bluetooth settings on your music device and connect to “Xorb mini”. After
connecting the master speaker Bluetooth indicator LED will display solid blue and
green, and passive speaker display solid green only.
Note: If the Xorb mini is already connected to another Bluetooth device,
disconnect that device before connecting.
Only the first time need to connect master and passive speaker, then master and passive
speaker will remember each other and automatically connect with each other in future.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following This device complies with part 15
of the FCC Rules. Operation is subject to the following must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.