Wonders Technology WB135 Wifi Speaker User Manual

Wonders Technology Co., Ltd. Wifi Speaker

user manual

revision: 0page 1 of 2insideHello! WarningsFCC Statement7198-47We hope you absolutely love your new speaker. Alexa technology.Please read the warning and instructions before initial use of the speaker.Upon initial use or after a prolonged storage period, fully charge it once. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.To reduce the risk of injury, close supervision is necessary when the product is used near children.Do not expose the device to moisture.Use of a power supply or charger not recommended or sold by device manufacturer may result in a risk Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk risk of injury.Tap to talk! Alexa from Amazon hands free functionProduct dimension: 83 x 146 mm; Bluetooth version: V4.1Speaker Driver Diameter: 52mmRated output power: 5WBuilt in 3.7V/2200mAh lithium polymer battery Charging input: 5V/400mA; It takes 4 hours to charge the speaker from 0 to 100%Playback time at max volume: up to 3 hoursby the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.MADE IN CHINAservice person when service or repair is required. injury.above 212ºF may cause explosion. person using only identical replacement parts. This will ensure that the safety of the product is maintained.Do not charge the device while using the device to charge another device. Do not charge the device for more than 4-6 hours and do not leave unattended.Switch off the device when not in use.••••••••••••••••••••••••Amazon Alexa is built in the cloud, so it is always getting smarter. The more you use Alexa, the more it adapts to your speech patterns, vocabulary, and preferences with new features continually being added. Ask Alexa to answer questions, play music, hear the news, get weath-and more.
revision: 2page 2 of 2back sideHow to use the Speaker:Bluetooth® ConnectionWiFi ConnectionCharge the speaker completely before initial use.You have to manually enter Bluetooth® modeDowload the APP to create the WiFi connection.Common Voice Commands:“Alexa, play relaxing music.”“Alexa, what’s the weather like?”“Alexa, what’s in the news?”“Alexa, add milk to my shopping list.”“Alexa, set an alarm for 6 AM.”“Alexa, what am I doing on Wednesday?”“Alexa, what were yesterday’s NBA scores?”“Alexa, what’s on at the movies?”“Alexa, what time is it in New York?”Button Functions: (play, rewind, etc.)Using the privided cables, connect the Micro-USB end into the speaker and the USB end into a computer or an AC wall adapter.The LED (located above the volume controls) will light up red when charging and will turn green when fully charged.It takes 2-3 hours to charge the speaker fully.Press and hold the button to enter Bluetooth® pairing mode.Select “Vale ” from your smart phone’s list of possible pairs to connect via Bluetooth®. Once connected, play audio as desired. Download and connect to the DOSS Tower app. You’ll need the app to connect to the WiFi network Using this allows you to create a seamless hub for all your audio APPs (Spotify® and Amazon Music®).To use the Amazon Alexa talk feature, you’ll use the Microphone button , and say your command.Power on the speaker.Open app from mobile device.Select “Vale” and follow the prompts within he app.complete the setup wizard.Press and hold the ( on the bottom of speaker) to pair with preferred WiFi network. The LED Indicator sounds.TROUBLE CONNECTING?Contact your network service provider.Alexa can only be activated when connected to a WiFi networkButton is located on the bottom of the speakerShort press: Mode switch to Bluetooth® modeShort press: Mode switch to WiFi modeWhen speaker is powered on, it will default to connection will be automatic upon powering on. A been made (within 15-20seconds). Short press: Play or PauseLong press: Power ON/OFFShort press: Answer or End call (Bluetooth® Mode)Short press: Activate Amazon Alexa (WiFi Mode) Short press: Next TrackLong press: Volume +Short press: Previous TrackLong press: Volume –••••••• • • •1.2.3.4.**Downloadthe App!This app is supported by Android and iOS devices.The app will allow you to control the speaker.For iOSFor AndriodDOSS Tower
FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Navigation menu