Wonders Technology WB135 Wifi Speaker User Manual
Wonders Technology Co., Ltd. Wifi Speaker
user manual
revision: 0
page 1 of 2
inside
Hello! Warnings
FCC Statement
7198-47
We hope you absolutely love your new speaker.
Alexa technology.
Please read the warning and instructions before
initial use of the speaker.
Upon initial use or after a prolonged storage period,
fully charge it once. The unit’s full performance is
achieved only after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close supervision is
necessary when the product is used near children.
Do not expose the device to moisture.
Use of a power supply or charger not recommended
or sold by device manufacturer may result in a risk
Do not use the device in excess of its output rating.
Overload outputs above rating may result in a risk
risk of injury.
Tap to talk! Alexa from Amazon hands free function
Product dimension: 83 x 146 mm;
Bluetooth version: V4.1
Speaker Driver Diameter: 52mm
Rated output power: 5W
Built in 3.7V/2200mAh lithium polymer battery
Charging input: 5V/400mA; It takes 4 hours to
charge the speaker from 0 to 100%
Playback time at max volume: up to 3 hours
by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment general uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1) this device may not cause harmful interference,
and (2)this device must accept any interference
received, including interference that may cause
undesired operation.
MADE IN CHINA
service person when service or repair is required.
injury.
above 212ºF may cause explosion.
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
Do not charge the device while using the device to
charge another device. Do not charge the device for
more than 4-6 hours and do not leave unattended.
Switch off the device when not in use.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Amazon Alexa is built in the cloud, so it is
always getting smarter. The more you use Alexa,
the more it adapts to your speech patterns,
vocabulary, and preferences with new features
continually being added. Ask Alexa to answer
questions, play music, hear the news, get weath-
and more.
revision: 2
page 2 of 2
back side
How to use the Speaker:
Bluetooth® Connection
WiFi Connection
Charge the speaker completely before initial use.
You have to manually enter Bluetooth® mode
Dowload the APP to create the WiFi connection.
Common Voice Commands:
“Alexa, play relaxing music.”
“Alexa, what’s the weather like?”
“Alexa, what’s in the news?”
“Alexa, add milk to my shopping list.”
“Alexa, set an alarm for 6 AM.”
“Alexa, what am I doing on Wednesday?”
“Alexa, what were yesterday’s NBA scores?”
“Alexa, what’s on at the movies?”
“Alexa, what time is it in New York?”
Button Functions: (play, rewind, etc.)
Using the privided cables, connect the Micro-USB
end into the speaker and the USB end into a
computer or an AC wall adapter.
The LED (located above the volume controls) will
light up red when charging and will turn green when
fully charged.
It takes 2-3 hours to charge the speaker fully.
Press and hold the button to enter Bluetooth®
pairing mode.
Select “Vale ” from your smart phone’s list of
possible pairs to connect via Bluetooth®.
Once connected, play audio as desired.
Download and connect to the DOSS Tower app.
You’ll need the app to connect to the WiFi network
Using this allows you to create a seamless hub for
all your audio APPs (Spotify® and Amazon Music®).
To use the Amazon Alexa talk feature, you’ll use the
Microphone button , and say your command.
Power on the speaker.
Open app from mobile device.
Select “Vale” and follow the prompts within he app.
complete the setup wizard.
Press and hold the ( on the bottom of speaker) to
pair with preferred WiFi network. The LED Indicator
sounds.
TROUBLE CONNECTING?
Contact your network service provider.
Alexa can only be activated when connected to a
WiFi network
Button is located on the bottom of the speaker
Short press: Mode switch to Bluetooth® mode
Short press: Mode switch to WiFi mode
When speaker is powered on, it will default to
connection will be automatic upon powering on. A
been made (within 15-20seconds).
Short press: Play or Pause
Long press: Power ON/OFF
Short press: Answer or End call (Bluetooth® Mode)
Short press: Activate Amazon Alexa (WiFi Mode)
Short press: Next Track
Long press: Volume +
Short press: Previous Track
Long press: Volume –
•
•
•
•
•
•
•
•
•
•
1.
2.
3.
4.
**
Download
the App!
This app is supported by
Android and iOS devices.
The app will allow you to control
the speaker.
For iOS
For Andriod
DOSS Tower
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) This device may not cause harmful interference, and (2) this
device
must accept any interference received, including interference that may cause
undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator&your body.