Wyse Technology WT9650 Windows-Based Terminal User Manual 88793 01A 9650XE ALADDIN QSG

Download:
Mirror Download [FCC.gov]
Document ID	321480
Application ID	E8WMalcmOTE0pYg8507SYw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.54kB (494233 bits)
Date Submitted	2003-04-28 00:00:00
Date Available	2003-04-28 00:00:00
Creation Date	1999-03-24 14:35:53
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-04-11 13:02:04
Document Title	88793-01A 9650XE [ALADDIN] QSG.fm
Document Creator	FrameMaker 6.0
Document Author:	mraboy

Winterm™ Model 9650XE XPE-Based Terminal
Quick-Start Guide
➊
Connect –
Caution: Improper connection, mounting, or use of this product could result in component failure and/or flash
memory corruption. Read the following caution statements before setting up and operating the terminal.
(FIGURE TO BE SUPPLIED)
PS/2-type mouse interface
Parallel port
Network connection, 10/100Base-T
Serial port
PS/2-type keyboard interface
6 Video port
7 USB port (2)
8 Speaker out
9 Line in
10 Microphone
11
12
13
14
+12V Power cable interface
Floppy drive (optional)
USB port (2)**
CD-ROM drive (optional)
Caution Statements:
Setup
•
Do not connect power until all other connections are made. Connecting or disconnecting components
or devices on the back panel when the terminal is receiving power can cause power surges and damage the
terminal. (USB ports are hot-swappable.)
•
Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is
correctly oriented to the receptacle.
Orientation and Venting
•
Mount the terminal only as shown above or in accordance with the instructions provided with the Wyseapproved wall mount (see Note that follows). Improper orientation (such as component side down, where the
back panel’s symbols are upside down) could inhibit the dissipation of heat from the terminal and damage it.
•
Allow sufficient space around the terminal for ventilation; do not place the terminal in any enclosure that
restricts airflow around the terminal; do not place any objects on the terminal. Product environmental
specifications are available through Wyse’s Web site at http://www.wyse.com/products/winterm/products.htm.
*Supplied for U.S.A.; in other locales, check package contents or contact your Wyse reseller.
**Front USB ports not available if floppy drive option is installed.
Power Sources
•
To ensure regulatory compliance, use only the power supply included in the shipping box, or a
Wyse-approved equivalent, with the terminal. Also, the noise suppressor (ferrite bead) included in the box
with the terminal must be installed on the network cable as described following these caution statements.
Refer to the regulatory notices in the terminal’s on-line documentation at http://www.wyse.com/products/
winterm/quickstart/9000.htm.
•
To prevent accidental loss of power, brown out, and spikes which could damage the terminal, avoid
connecting it to any form of switching device (including power strips) or hard resetting the terminal by holding
down the power button.
•
When turning off the terminal, be sure to perform a complete shutdown (via the user interface or power
button); do not disconnect the power cord, shut off power at a circuit breaker, etc., to turn off the terminal.
Note: Visit http://www.wyse.com/products/accessories/mounting.htm for information about approved wall-mount
and monitor-mount accessory kits.
Note: Rubber feet are provide for horizontal orientation on hard surfaces and plastic cylinder supports are
provided for vertical orientation. Insert terminal into cylinders with the power button at the top, then press cylinder
ends firmly towards the terminal.
Note: To ensure that the product
complies with EN55022B and FCC
Class B requirements, follow these
instructions to install the ferrite bead
on your LAN cable.
➋
Turn On –
Important: By unpacking and using the terminal, you
agree to be bound by the license agreements in the users
and administrators guides. See those agreements for
specific details at http://www.wyse.com/products/winterm/
quickstart/9000.htm.
(FIGURE TO BE SUPPLIED)
➌ Configure – Setup is quick and simple...
The terminal is preset to auto-login as User (password: User). For administrative access, the terminal is preset to
accept the user name Administrator (password: Administrator). VNC is also preset to start automatically
(password: Wyse). User names are not case sensitive; passwords are case sensitive. To log in as administrator
hold down the Shift key while logging out of the user account until you get to the login screen, then enter the user
name and password for the administrator account.
Caution: It is strongly advised that the administrative password be changed immediately upon configuring the
terminal for use.
➍
Help – Need more information, upgrades/accessories, or Wyse’s automatedwarranty registration‚ process?
http://www.wyse.com/products/winterm/quickstart/9000.htm
Need more information on Wyse Rapport, the remote management software that comes with this terminal?
http://www.wyse.com/bundle
‚
Register within 90 days to get 2 years’ extended warranty at no cost.
Wyse Technology Inc.
3471 North First Street
San Jose, CA 95134-1801 U.S.A.
883793-01 Rev. A
April 2003
©2003 Wyse Technology Inc. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:04:11 13:02:04Z
Create Date                     : 1999:03:24 14:35:53Z
Page Count                      : 2
Creation Date                   : 1999:03:24 14:35:53Z
Mod Date                        : 2003:04:11 13:02:04Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : mraboy
Metadata Date                   : 2003:04:11 13:02:04Z
Creator                         : mraboy
Title                           : 88793-01A 9650XE [ALADDIN] QSG.fm

EXIF Metadata provided by EXIF.tools