X Z LAB 113 IoT-Cloud User Manual

X-Z LAB, INC. IoT-Cloud Users Manual

Users Manual

IoT-Cloud Users Manual
CONTENT 1.Introduction ................................................................................................................................... 3 2. specifications ................................................................................................................................. 3 3. Quick Installation........................................................................................................................... 4 4.Electromagnetic Compatibility ....................................................................................................... 4 5.Safety.............................................................................................................................................. 5 6.Trouble shooting ............................................................................................................................. 6 7. The package contain ...................................................................................................................... 7
1.Introduction IoT-Cloud IOT-Ethernet transformer is meant to establish and maintain the entire radiation detection system(Radsys), and it is the communication junction station between IOT and Ethernet . It plays an important role in the Radsys system. 2. specifications Specifications The IoT-Cloud Rated voltage 5V-DC Rated current 100mA Wireless operation frequency 2405MHz-2475MHz Wireless transmission power 19dBm Power interface 5.5*2.1mm DC port Data interface RJ45 Power adapter input voltage 100~220V /AC Power adapter output voltage 5V/DC Load capability 1A Temperature -10℃-60℃ Dimensions 140*120*30mm Weight 174g Regulatory FCC Part 15 compliant
3. Quick Installation 1. Connect one end of the network cable to the RJ45 interface in the back of the IoT-Cloud; 2. Connect another end of the network cable to the PC port of the monitoring server, or the router which is well connected with the server; 3. Fix the rod antenna in the SMA port in the back of the IoT-Cloud; 4. During installation, keep the device away from metal material which may effects the signal quality; 5. Power on the IoT-Cloud through the adapter with the voltage range from 100V to 220V AC, the power light will turn red when the device starts to work. 4.Electromagnetic Compatibility This product complies with relevant international and national laws and standards on EMC (electromagnetic compatibility) for this type of product when used as intended. Such laws and standards define both the permissible electromagnetic emission levels from equipment and its required immunity to electromagnetic interference from external sources. Other electronic products exceeding the limits defined in such EMC standards could, under unusual circumstances, affect the operation of the product. • Information Technology Equipment (ITE) need special precautions regarding EMC, and need to be installed and put into service according to EMC information provided in the accompanying documents. • Please use the shielding RJ 45 port which is meant to connect with PC, the use of accessories and cables other than those specified may result in increased emission or decreased immunity levels. • The product should not be used adjacent to or stacked with other products and that if adjacent or stacked use is necessary, it should be observed to verify normal operation. This equipment is intended for use in a hospital environment. Operation in other than hospital environments may compromise electromagnetic compatibility. The IoT-Cloud complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Requirement To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 5.Safety Important safety directions If the product is not functioning correct or damage is visible, please contact your RAYCAN representative, who will take appropriate actions in order not to create harm. Handle the product with care. Make sure that the product is used and stored in a secured environment to prevent unauthorized access. Maintenance & faults WARNING Do not use the product for any application until you are sure that the user routine-checks have been satisfactorily completed, and that the periodic maintenance of the product is up to date. If any part of the product is known (or suspected) to be defective or wrongly adjusted, DO NOT USE the product until a repair has been made. Operation of the product with defective or wrongly adjusted components could expose the user or the patient to radiation or other safety hazards. This could lead to fatal or other serious personal injury. Safety awareness WARNING Do not use the product for any application until you have read, understood and know all the safety information, safety procedures and emergency procedures contained in this Safety section. Operation of the product without a proper awareness of how to use it safely could lead to fatal or other serious personal injury. Adequate training WARNING Do not use the product for any application until you have received adequate and proper training in its safe and effective operation. If you are unsure of your ability to operate this product safely and effectively, DO NOT USE IT. Operation of this product without proper and adequate training could lead to fatal or other serious personal injury. Safety devices Warning Never attempt to remove, modify, override or frustrate any safety device on the product. Interfering with safety devices could lead to fatal or other serious personal injury. Intended use and compatibility Warning Do not use the product for any purpose other than those for which it is intended. Do not use the product with products other than that which RAYCAN recognizes as compatible. Operation of the product for unintended purposes, or with incompatible products, could lead to fatal or other serious injury. Electrical safety WARNING Do not remove covers or cables from this product. Dangerous electrical voltages are present within this product. Removing covers or cables could lead to serious or fatal personal injury. Covers or cables should only be removed by qualified and authorized service personnel. Use this product in rooms or areas that comply with all applicable laws (or regulations having the
force of law) concerning electrical safety for this type of product. Electrically isolate this product from the mains electrical supply before cleaning, disinfecting or sterilizing it. Mechanical safety WARNING Do not remove covers from this product. Removing covers could lead to serious or fatal personal injury. Covers should only be removed by qualified and authorized service personnel. In this context, qualified means those legally permitted to work on this type of medical electrical product in the jurisdiction(s) in which the product is being used, and authorized means those authorized by the user of the product. Explosion safety WARNING Do not use this product in the presence of explosive gases or vapors. WARNING Do not use flammable or potentially explosive disinfecting sprays. WARNING Use of this product in an environment for which it was not designed can lead to fire or explosion. Fire safety Use of electrical product in an environment for which it was not designed can lead to fire or explosion. Fire regulations for the type of medical area being used should be fully applied, observed and enforced. Fire extinguishers should be available for both electrical and non-electrical fires. WARNING Only use extinguishers on electrical or chemical fires, which are specifically labeled for those purposes. Using water or other liquids on an electrical fire can lead to fatal or other serious personal injury. If it is safe to do so, attempt to isolate the product from electrical and other supplies before attempting to fight a fire. This will reduce the risk of electric shocks. Electrostatic discharge (ESD) CAUTION Always wait at least ten seconds after the product is switched OFF before switching the product back to ON. CAUTION Always use proper static procedures, protection, and product prior to opening and during handling of this product. This product contains components that are electrostatic sensitive. Failure to use ESD procedures may cause damage to these components. Such damage to components is not covered by RAYCAN warranties. ESD can amount to a significant voltage, which may cause damage to PCBs or other system components. ESD damage is cumulative and may not be apparent at first, as indicated by a hard failure, but can cause degraded performance. Therefore, always use proper ESD handling procedures. ESD can result from low humidity conditions, use of electrical equipment on carpeting, linens, and clothing. 6.Trouble shooting Problems Solutions Unable to connect correctly Restart and check the connection. * If the problem listed above can’t be solved, please
contact us 7. The package contain Name Number Host 1 Rod Antenna 1 Power Adapter 1 Certificate 1 Users manual 1
Branch office 2440 Camino Ramon, Suite 264 San Ramon, CA 94583,USA Headquarters Bldg 17, 8 Jinfeng Rd, Suzhou New District, Suzhou, 215163, China 1-925-359-6908 (T) 1-925-380-6784 (F) Web: http://www.x-zlab.com/ Version:H-2-000001

Navigation menu