XAC Automation XCEC150D Contactless Reader User Manual

XAC Automation Corporation Contactless Reader

User Manual.pdf

Download: XAC Automation XCEC150D Contactless Reader User Manual
Mirror Download [FCC.gov]XAC Automation XCEC150D Contactless Reader User Manual
Document ID2658119
Application ID04eUxy8cXFszEnW1eAsenA==
Document DescriptionUser Manual.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.52kB (206527 bits)
Date Submitted2015-06-25 00:00:00
Date Available2015-06-25 00:00:00
Creation Date2015-06-17 18:10:48
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2015-06-17 18:10:48
Document TitleMicrosoft Word - InstallationGuide_C150D 20150608更新後加警語_0616.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: judlin

CONTACTLESS READER MODULE XCE_C150D
INSTALLATION GUIDE
MODEL:
xCE_C150D
1. IN THE BOX
xCE_C150D (Figure 1) with 2 types of cables:
a) RS232 interface (Figure 2) –xCE_C150D is powered by power
adapter.
b) USB interface (Figure 3) –xCE_C150D is powered by host through
USB.
(Figure 1)
( Figure 2)
(Figure 3)
2. ANGLE ADJUSTMEN
Locked: Clockwise
Release: Counterclockwise (Figure 4)
Release
Locked
(Figure 4)
3. SETTING CONNECTION
USB interface:
Plug the USB connector into any of the USB port of the host.
RS232 interface:
Connect the RS232 connector with the COM port of the host.
(Figure 5)
(Figure 6)
(Figure 7)
Connect plugs in Figure 5 and 6 as in Figure 7 until a click sound is
heard.
4. INSTALLING THE SAM CARD
Loosen the screw and open the SAM gate (Figure 8) at the back side of C150D,
insert the SAM card in the slot (Figure 9).
(Figure 8)
(Figure 9)
5. USING CONTACTLESS CARD READER
Contactless reader antenna is around the display. It will light up and blinking
the 1st LED when xCE_C150D is powered on and that means reader is ready
for operation.
Place contactless card close to contactless logo
(Figure 10).
xCE_C150D would detect the card and read the card data.
(Figure 10)
Caution :
If the power supply is missing from your XAC AUTOMATION CORP. product package, please
contact XAC AUTOMATION CORP. Technical Support at www.xac.com.tw for a replacement.
This product should only be used with a UL listed power supply marked “I.T.E. LPS” with an
output rated 5V DC, minimum 1.0 A, Tma: minimum 40 degree C.
Federal Communications Commission
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
pro-vide reasonable protection against harmful interference when the equipment
is operate din a commercial environment. This equipment generates, uses, and
can radiate radiofrequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
"CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of
Used Batteries According to the Instructions."

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:06:17 18:10:48+08:00
Create Date                     : 2015:06:17 18:10:48+08:00
Format                          : application/pdf
Title                           : Microsoft Word - InstallationGuide_C150D 20150608更新後加警語_0616.docx
Creator                         : judlin
Document ID                     : uuid:0574287b-1328-4725-b759-75eabf5da6d6
Instance ID                     : uuid:3607d9c2-8e82-47cc-b759-0c29f14421e3
Page Count                      : 5
Author                          : judlin
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MQT-XCEC150D

Navigation menu