XIAMEN LEELEN TECHNOLOGY JB305S18 JB-305 color door station No.18A_IC User Manual
XIAMEN LEELEN TECHNOLOGY CO., LTD JB-305 color door station No.18A_IC Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3904012 |
| Application ID | 7mXCcu1HrWm6/A2iSJssNg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.05kB (950616 bits) |
| Date Submitted | 2018-06-27 00:00:00 |
| Date Available | 2018-06-27 00:00:00 |
| Creation Date | 2017-11-30 08:49:52 |
| Producing Software | Corel PDF Engine Version 1.0.0.458 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW 版本 12.0 |
JB-305 Villa Video Door Entry System User’s Manual(V1.3) Please read this manual carefully before the products are installed. Technical specifications and contents are subject to change accordingly without advance notification. No:RP.000.ZC-SM.229 CONTENTS Part 1. Product introduction Page Part 1. Product introduction 1.1 Use purpose 1.2 System configuration 1.3 Features and functions 1~2 Part 2. Technical parameters & structure 2.1 Technical parameters 2.2 Structure 3~5 Part 3. Installation and connection 3.1 Installation 3.2 Connection 6~15 Part 4. System programming 4.1 Audio jumper 4.2 Video jumper 4.3 Door station address 4.4 Card reader 4.5 Password (for Model No.18 only) 16~25 16 16 17 18 20 Part 5. Operation 5.1 Operation on door stations 5.2 Operation on indoor phone 26~32 26 28 Part 6. Troubleshooting 6.1 Test 6.2 Troubleshooting 33 33 33 1.1 Use purpose The system is applied to single family houses, offices, shops, warehouses, and other access control purpose. 1.2 System configuration Configuration Remarks Options ① All panels are aluminum. ② Door stations don't require any direct power supply. Model No.18 (JB-305 color door station ③Card reader is available. ④ Model No.18 is with a keypad for PIN No.18A_IC codes to release doors. JB-305MGCQ-S18AI) Model No.15 Door station ① 7" TFT color screen. Model N60 Indoor phone (JB-305 indoor phone N60 ② Every indoor phone requires the 18VDC JB-305VCW-70LN60) power. Adapter (18VDC, 1A) Power supply Transformer (18VDC, 2.2A) ① Both are free voltage input AC100V~240V. ② One transformer can support up to 4 indoor phones while one adapter can support only one indoor phone. But if there are 3 or more door stations, another transformer may be required. ! We may provide more options and the current options may be replaced without prior notification. 1.2.1 Door stations CALL MIC Model No.18 102 175 39(mm) Model No.15A surface mount. 79 148 45(mm) Model No.15B surface mount, card reader. 79 148 45(mm) 1.2.2 Indoor phone & Power supply Part 2. Technical parameters & structure 2.1 Technical parameters 2.1.1 Door station Transformer (DIN Rail) (Power supply) Adapter Indoor phone Model N60 239 139 20(mm) 1.3 Features and functions >Call, answer, and release doors. >DIY system with 4 wires; PLUG & PLAY connection. >Various flexible connection diagrams are optional. >Max. capacity: Up to 4 door stations and 4 indoor phones. >Intercom and calling transfer between indoor phones. >12 melody ring tones are optional. >Two options to release doors, by SIGNAL or by POWER. >Use two group passwords to release two doors and gates (Model No.18). >Double unlock buttons to release two doors/gates/garages.... >Use cards to release the doors. >Surface and flush mount are optional. >Rainproof and anti-vandal. >Night viewing; illuminated call button. >Touch button indoor phones are optional. >Privacy functions are available. 1,300,000 Pixels, CMOS 92° F=3.7 H: 350TVL V: 320TVL 0.01 LUX 1Vp-p/75Ω ≥25dB ≤7% ≤100mA ≤230mA DC18V±10% -40℃～+70℃ Camera: Viewing angle: Lens: Resolution: Min. illumination: Video output: Audio SNR: Audio distortion: Standby current: Working current: Working voltage: Environment temperature: 2.1.2 Indoor phone 7"TFT, 800 480 Pixels H: 350TVL V: 320TVL 1Vp-p/75Ω ≥25dB ≤7% ≤100mA ≤300mA DC18V±10% -25℃～+55℃ Display: Resolution: Video output: Audio SNR: Audio distortion: Standby current: Working current: Working voltage: Environment temperature: 2.2.2 Indoor phone(Model N60) 2.1.3 Power supply Adapter AC100V~240V DC18V 1A Optional Voltage input Voltage output Current output Power plug style 2.2 Structure 2.2.1 Door stations Transformer AC100V~240V DC18V 2.2A ABS decorative coat Microphone Intercom call button Function button1 Function button2 Monitor button Unlock button Answer button 7" TFT-LCD screen LED indicator Power indicator Speaker 2.2.3 Power supply A) Adaptor A) Model No.18 (Flush mount) Output power plug to indoor phone LEDs Speaker Camera Input power plug Keypad Cast aluminium panel CALL MIC B) Transformer Anode(L) Cathode(N) Ground( ) Call button Card reader inside Microphone Screw Power output terminals N L -+-+ Power indicator B) Model No.15 (Surface mount) Rain shield(Surface mount bracket) LEDs Camera Light sensor Cast aluminium panel Speaker Card reader inside Name tag Call button Microphone Screw expansion plugs Part 3. Installation and connection 3.1 Installation 3.1.1 Door stations A)Model No.18 (Flush mount) a. Produce a groove(86.4x154.4x55mm) on a proper position of the wall(①). b. Take off the door panel from the box with the enclosed screw driver(②③). c. Fix the box in the groove with screws and expansion plugs or cement(①). d. Fix the door panel in the box with the screws(④). ② ① Door panel Bracket(rain shield) ③ ① Mind the actual camera viewing angle and put the door station on a proper position. [the manufacturer suggests 1.4~1.8m of height.] ② Do not put the devices at the places where there are high voltage, high temperature, strong magnet, corrosive, humidification, ets. ③ Do not drag the cable. Keep the devices clean. ④ 3.1.2 Indoor phone CA MI ②④ LL Door panel ③ Box ① Wall a. Fix the bracket on the box or on the wall with the screws(① or ②). b. Move the indoor phone and put it on the bracket after connect the cable(③). a. Take off the door panel from the bracket with the enclosed screw driver(①). b. Fix the bracket on the wall with two screws and expansion plugs(②). c. Put the door panel on the bracket and fix it after connect the cable(③). Hook ③ B)Model No.15 (Surface mount) ② expansion plugs ① box bracket indoor phone 3.1.3 Name tag (Model No.15) 3.2.2 Terminals 1 2 Terminals to door station or/and indoor phone. Both have no cover David Hunter name tag David Hunter spacer a. Press the name tag at a side and then take it off. b. Change the name tag. c. Insert the set of name tag into the groove and then press it to be locked. 3.2 Connection 3.2.1 Wires and distance ≤50m ≥1.5mm2 ≤100m Between the last door station and the last indoor phone ≤100m For DIN rail power supply (transformer) 18V AUDIO VIDEO GND NCG VM L- L+ GO OUT COM NC NO ND NC Model No.18 Model No.15 6 ND VM O OUT RVV2x1.0 mm (U.S.:AWG18) COM LNC L+ NO GND VIDEO AUDIO +18V ≥0.75mm NC Remarks A) Door stations NC Best distance Wire diameter difference. 3 Terminal for electronic POWER lock 4 Terminal for electronic SIGNAL lock 5 Terminal for exit button 6 Privacy jumper 7 SET button 8 Video jumper 9 Audio jumper 10 Terminal to power supply 11 Terminals for gates/garages/lights ... 12 Potentiometer for speech volume B. Best connection for up to 4 door stations and 4 indoor phones B) Indoor phone 11 9 AF RVV4x0.75mm2 NC 10 GND + 18V e-lock RVV4x0.75mm2 12 RVV4x0.75mm2 NC PWR AU VD GND 2 VM Model N60 e-lock RVV4x0.75mm2 RVV4x0.75mm2 3.2.3 Component diagram A. Basic connection e-lock RVV4x0.75mm2 e-lock RVV4x0.75mm2 e-lock 10 11 C. Other workable connection C1. Example 1: 0.75mm RVV4x RVV4x0. 75mm2 ⑤ Video jumpers may be helpful in case there is any problem with image display especially while 2 or more indoor phones are used. Please go to 4.2 for the jumpers' usage. ⑥When there are 2 or more door stations, door stations have to be addressed so that every door stations have their exclusive address codes. If there are, please go to 4.3 for door station address. ⑦In case more indoor phones or door stations are required in diagram A, C1 and C2, please connect them from the terminal wires and try. If the image quality is not good enough and the image adjustors cannot help, please read 4.2 and try accordingly. 3.2.4 Electronic locks There are various electronic locks. People from different countries may have different practice of using electronic locks. Generally speaking there are two methods to release doors via door entry systems. One is SIGNAL. Another is POWER. This system supports both. Users may adopt either accordingly. e-lock C2. Example 2: RVV 4x0.7 A) Diagrams for POWER electronic locks 5mm 2 e-lock (example: Door station Mode l No. 15) mm 4x0.75 RVV COM LNC L+ NO 18V AUDIO VIDEO GND e-lock VM ①The basic components are 1 door station, 1 indoor phone, and 1 power supply. The max. capacity the manufacturer suggests is 4 door stations and 4 indoor phones. More components may cause malfunctions. ② One adapter can support only one indoor phone while one transformer can only one indoor phone while one transformer can support up to 4 indoor phones. But if there are 3 or 4 door stations, one more adapter or transformer is required, because the turning monitor function may be not workable. ③ All door stations do not require power supply. ④ For easy connection the diagrams of C1 and C2 can be applicable to projects accordingly. O OUT 12 NCG ND NC 13 3.2.5 Terminals for gates/garages/lights ... There are the terminals 11 with relays on the back of the indoor phones. They can be applicable for gates garages, lights, etc. The relays can keep releasing in 1.5 seconds. B) Diagrams for SIGNAL electronic locks (example: Door station Model No. 15) COM LNC L+ NO 18V AUDIO VIDEO GND 12VDC Gates, garages, lights, or etc. VM NCG O OUT or e-lock ND NC ①Please choose one of the above mentioned diagrams according to the electronic locks. ② Instant output (Diagram A): 12VDC, 500mA. ③ In diagram B, COM terminal has to be connected. NC means close circuit. NO means open circuit. Please choose a right terminal according to the electronic locks. ④ The electronic locks can keep releasing in 5 seconds. ⑤ SIGNAL locks and POWER locks can be connected to different door stations. There is no interference. ⑥ A SIGNAL lock and a POWER lock can be connected to the same door station. ⑦ Please mind if the wires of electronic locks are nonpolarity. 14 Caution! Max. contact load(terminals 11 in 3.2.2): 2A/30VDC and 0.5A/125VAC. DO NOT exceed the parameters. Otherwise it may cause damages. 15 ... Part 4. System programming 11 9 AF 12 VM indoor phone(Model N60) 4.2 Video jumper In case the image display is rolling or with any other abnormality problem and the image adjustors can not help, the video jumpers have to be put on video matching position in the last indoor phone and the last door station in diagram A and B, the two indoor phones in diagram C1 and the two door stations in diagram C2. Meanwhile the other devices' jumpers have to be put on NC position. 16 10 GO OUT COM NC NO Door station (Model No.18) NC GND + 18V PWR AU VD GND 2 12 NC PWR AU VD GND 2 NC NC GND +18V L- L+ VM GND VIDEO AUDIO +18V 10 6 ND NC 11 9 AF NC 4.1 Audio jumper The audio jumper has to be put on AF position in the indoor phone if there is only one indoor phone. In case there are more indoor phones, only the first indoor phone is required to do that. Meanwhile the other indoor phones' jumpers have to be put on NC position. Please do the same if there are two or more routes such as the diagrams of C1 and C2 in 3.2.3. VM indoor phone (Model N60) 4.3 Door station address If there are two or more door stations, door stations have to be addressed. Maximum capacity is 4 door stations. There is a SET button on the back of the door stations. Keep pushing the SET button until it sounds double beeps. Then the door station is ready for setting. Continue to push the SET button again and again. The door station will sound continuous double beeps, triple beeps, and quadruple beeps by turns. The door stations are all No.1 by default. Double beeps is for No.2. Triple beeps is for No.3. Quadruple beeps is for No.4. Please choose the options and keep pushing the SET button to set the address number accordingly. Please be sure every door station has exclusive address numbers if they work together. 17 4.4 Card reader A. Register master cards The system provides up to 8 master cards. Users may use the card to register or cancel other cards easily. a. Push the SET button on the back of the door station (①). b. Push the CALL button and do not release it for 2 seconds(②). The door station will sound double beeps. At this moment the system gets ready to register master cards. c. Put a card proximate to the reader(③). When the door station sounds a beep, the card is registered as a master card successfully. If more master cards are needed, please continuously put more cards proximate to the reader one by one. d.Exit by pushing the SET button again(①). (It also can exit automatically after 15 seconds.) 2" MAST ER b. Put a card proximate to the reader(②). The door station will sound a beep if it is registered as a user card successfully. If more user cards are needed, please continuously put more cards proximate to the reader one by one. (Max. capacity: 120pcs) c. Exit by putting the master card proximate to the reader again (①). (It also can exit automatically after 15 seconds.) MAST ER C. Cancel cards a. Put a master card proximate to the reader(①). The door station will sound a long beep. b. Push the CALL button and do not release it for 2 seconds(②). All registered user and master cards will be canceled as soon as the door station sounds a long beep again. Meanwhile the reader gets ready for registering master cards. 2" B. Register user cards a. Put a master card proximate to the reader(①). The reader will get ready to register user cards as soon as the door station sounds a long beep. 18 MAST ER 19 4.5 Password settings (for Model No.18 only) Residents are allowed to use passwords to release the doors on the door station Model No.18. There are three group passwords. They are > System password (default:1234). It is the key to change all passwords. > Entry password 1 (default:1235). It is the key to open the doors that connect to the terminals of the door stations. > Entry password 2 (default:1236). It is the key to open the gates that connect to the terminals of the indoor phones. 4.5.1 Change passwords A) Change the system password Step 1> Push *00*. If it sounds a long beep, then Step 2> Push the old password and end by * button. If it sounds a long beep, then Step 3> Push the new password and end by # button. If it sounds a long beep, the new password is valid. For example, if the default password needs to be changed to 4444, then do as the following figures. B) Change entry password1 Step 1> Push *01*. If it sounds a long beep, then Step 2> Push the old password and end by * button. If it sounds a long beep, then Step 3> Push the new password and end by # button. If it sounds a long beep, the new password is valid. For example, the default password needs to be changed to 5555, then do as the following figures. *01* 1235* CALL CALL CALL MI C MI C step 1 5555# MI C step 2 step 3 C) Change entry password 2 1234* *00* CALL CALL CALL MI C MI C step 1 4444# MI C step 2 20 Step 1> Push *02*. If it sounds a long beep, then Step 2> Push the old password and end by * button. If it sounds a long beep, then Step 3> Push the new password and end by # button. If it sounds a long beep, the new password is valid. For example, if the default password needs to be changed to 6666, then do as the following figures. step 3 21 1236* *02* 6666# CALL CALL CALL MI C MI C MI C step 3 step 2 step 1 The three group passwords should be exclusive to each other. Current Group Start password *00* *01* *02* 1234 1235 1236 New Remarks password End # Standby status 4444 5555 # Standby status 6666 # Standby status 4.5.2 Get into the program status Method 1>> Use the system password on the door station. For example, push 1234 as the following figure. Method 2>>Push the SET button on the back of the door station as the following figure. 4.5.3 Reset password In case residents forget the passwords, please follow the steps to reset the passwords. A) Reset the system password Step 1>Push the SET button on the back of the door station to get into the program status. Step 2>Push *00*. If it sounds a long beep, then Step 3>Push the new password and end by * button. If it sounds a long beep, then Step 4>Repeat the new password and end by # button. If it sounds a long beep, the new password is valid. For example, if the forgotten password needs to be reset to 4444, then do as the following figures. *00* ND NC VM VM L+ L- CALL NC MI C step 2 step 1 The door station will sound a beep to indicate the successful operation. Otherwise it will sound double beeps instead. It is same to 4.5.3. 4444# 1234 4444* OR ND CALL NC VM VM CALL L+ L- CALL NC MI C MI C MI C step 4 22 step 3 23 B) Reset entry password 1 Step 1> Push the SET button on the back of the door station to get into the program status. Step 2> Push *01*. If it sounds a long beep, then Step 3> Push the new password and end by * button. If it sounds a long beep, then Step 4>Repeat the new password and end by # button. If it sounds a long beep, the new password is valid. For example, if the forgotten password needs to be reset to 5555, then do as the following figures. *01* 5555* CALL CALL CALL MI C MI C step 2 5555# MI C step 4 step 3 C) Reset entry password 2 Step 1> Push the SET button on the back of the door station to get into the program status. Step 2> Push *02*. If it sounds a long beep, then Step 3> Push the new password and end by * button. If it sounds a long beep, then Step 4>Repeat the new password and end by # button. If it sounds a long beep, the new password is valid. For example, if the forgotten password needs to be reset to 6666, then do as the following figures. 24 *02* 6666* 6666# CALL CALL CALL MI C MI C MI C step 4 step 3 step 2 ① Before the door station exits the program status, the change can be tried again by repeating step 2 - 4 once the previous operation fails. ②The three group passwords should be exclusive to each other. ③The three group passwords can be set one by one at one time by starting from step 2, while the door station is on the program status. New password End New Group Start password *00* *01* *02* 4444 5555 6666 4444 5555 6666 4.5.4 Exit the program status Method 1> Push # button. Method 2> Push the SET button. Method 3> Don’t operate in 15 seconds. 25 Remarks Setting status Setting status Setting status Part 5. Operation 5.1 Operation on door stations 5.1.1 Call residents Push the CALL button on the door station. The door will sound a feedback ring if the calling is successful and the red LED indicators on indoor phones will turn on. The calling can be ended immediately once the call button is pushed again. 5.1.3 Use passwords to release doors Push 4 digits password (e.g. 5555). 5555 CALL MI C 5.1.4 Use cards to release doors Put a registered card proximate to the reader. The door station will sound a beep. CALL MI C 5.1.2 Push the exit button to release doors There is the terminal for exit button on the back of the door station. Push the exit button, the door station will sound a beep and release the door. DOOR 5.1.5 Privacy setting on door stations Put the privacy jumper on "NC" position. The door station will enter the privacy status, then it will not sound a feedback ring when it calls the indoor phones. EXIT ND ND NC NC ND NC VM VM L+ L- GO OUT NC GO OUT ND NC VM VM NC L+ L- Privacy OFF GO OUT 26 27 Privacy ON 5.2 Operation on indoor phone 5.2.1 Answer Push button and speak. 5.2.2 Release door Push button while the indoor phone is at intercom status or surveillance. 5.2.4 Video surveillance button and then the image in front of the camera will Push be displayed on the screen. If there are two or more cameras, surveillance for different entrances is also available by a 2nd, 3rd, or 4th push. During surveillance it is available to speak with somebody outside by pushing button and release the door by pushing button. 5.2.5 Call other indoor phones Push button to ring the other indoor phones while at the standby status, the green LED indicators will turn on. 5.2.3 Release gates/garages ... Push button if the indoor phones are with the function. 5.2.6 Call transfer Push button to ring the other indoor phones while at intercom status. If somebody answers, the line will be transferred. Functions of 5.2.5 and 5.2.6 are available only if there are two or more indoor phones. 28 29 5.2.7 Change the ring tone Push button and do not release it for 2 seconds. The indoor phone will ring. At this moment users may push button again and again to choose the favorite ring. The choice will be accepted once the indoor phone shuts automatically or the users push button. 2" 5.2.9 Adjust the speech volume Adjust the potentiometer on the back of the indoor phone with a tool such as a proper screw driver. 10 2" NC GND + 18V PWR AU VD GND 2 8 VM 12 NC 5.2.8 Adjust the ring volume Push button and do not release it for 2 seconds, then the indoor phone rings. While adjusting users may push button again and again to increase/decrease the ring volume. There are 8 levels. The levels will turn to next one by one. The setting will quit itself if no operation in 10 seconds. Users also may push button to confirm the setting and exit immediately. 11 9 AF Model N60 5.2.10 Change the ring duration The default ring duration is 15 seconds. There are 10 seconds, 15 seconds, 30 seconds and 45 seconds for options. At the standby status push button and do not release it for 2 seconds. The indoor phone will sound a beep. At this moment users may push button once to switch to the first option (10 seconds), then push the button again and again to switch to the next option in turn. It will sound double beeps when it switches to the last option (45 seconds). The setting will be accepted and synchronized to the other indoor phones by pushing button for 2 seconds or quit automatically if no operation in 10 seconds. 2" 30 31 5.2.11 Operation on OSD menu Push button to activate the screen. Then push M button to activate the OSD menu. There are the items of brightness, contrast and color. Users may push button (+) and button (-) to adjust the parameters, and push M button to confirm or skip them. Part 6. Troubleshooting 6.1 Test After all components are installed and connected as the user's manual, please switch the power on and then try to operate all features on all door stations and indoor phones as Part 5. 6.2 Troubleshooting Common malfunctions 5.2.12 Privacy setting At the standby status push M button and do not release it for 2 seconds. The indoor phone will enter or exit privacy status with a beep. During privacy, the red LED indicator keeps flashing. No feedback ring after pushing the call button. Meanwhile the door station's LED indicator doesn't turn on. No image displayed. The others are all ok. 2" Poor image quality or ghost image Possible reasons Disconnection on the power supply or socket. Disconnection on the (black) signal wire of the indoor phone. Check and connect the wires. No video jumper connected Check and connect the on the indoor phone or video jumper. door station. Receive a call but cannot Audio jumper is not on the answer. right position (usually AF). 32 Replace the power supply or the socket. Disconnection on the (red Check and connect the or black) signal wires. wires. Video jumper is not on the right device. Unavailable to activate a 2nd camera. Obviation The power is too weak to support the whole system. 33 Use the video jumper on the correct device. Use the audio jumper on the right position accordingly. If use only one transformer, please add another transformer/adapter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : D:20171130084952 Creation Date--Text : Creator : CorelDRAW 版本 12.0 Modify Date : 0000:01:01 00:00:00 Mod Date--Text : Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Corel PDF Engine Version 1.0.0.458 Creator Tool : CorelDRAW 版本 12.0 Metadata Date : 2018:06:28 09:04:59+08:00 Format : application/pdf Title : 305别墅可视对讲系统使用说明书V1.1(20171128) Document ID : uuid:5c5325ba-a84a-433f-b16f-24ec52671560 Instance ID : uuid:eeb2bfca-fe3e-428d-8e69-06aac2f08ed4 Page Count : 19EXIF Metadata provided by EXIF.tools